Nokia 5800 Updated Firmware - Problems with Alarms

I have just updated to Custom Version 40.0.005.C01.01 and have a similar problem to other owners.
When my phone is locked and a reminder comes on, linked to the Calendar, I have no way of Stopping the alarm.
I have tried removing the battery, as suggested for other problems, but that doesn't work.
Any advice welcome

we answered it 10000000 times, if you did one single search here you would find it
it's an ARROW not a button .... SWIPE your finger in the same direction of colour movement
it's the same in incoming calls while screen is locked
watch this :
V.40 ... how to answer a call or stop an alarm
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Similar Messages

Nokia 5800. Headphone problems with Radio (1 earph...

Hi, I have a trouble with radio.
MP3: works both earphones, Radio: left - works OK, right - very quietly.
Can you help me?

This isn't the solution but such an issue reported earlier...
/t5/Nseries-and-S60-Smartphones/Nokia-5800-Radio-Problem/m-p/627245/highlight/true#M193050

Updating firmware problem with kaspersky virus protection

Hi I am a new user and I am not sure if I am using this lenovo community feature the correct way. But I am having trouble with my computer and kaspersky virus proctection and I need a little help.. I don't have a warrnty plan and I was reading that I could recieve help from other lenovo users....

Hi tea_rioss,
I'm not sure if i understand the problem. Are you having problem updating some kind of firmware while Kaspersky is running? Are you taking about the BIOS? Could you describe a bit more exactly what the problem are and if you see some errors please let us know what the error message is and what you are actually trying to do.
It's a good idea to provide some info about your system like what kind of Thinkpad you got and what kind of OS. Also what kind of firmware you are trying to update.
Even if i don't really understand what the problem is it sounds to me like you have some issues with Kaspersky and not the computer. This is a Lenovo forum and you posted under the "Thinkpad T61 and prior T series" section so if you got some problems with Kaspersky it might be a better idea to post in the kaspersky support forum.
If you believe your problem is related to the computer please provide some info about the problem and your system as well as what you are actually trying to do.
-gan

What is new in Nokia 6500s update firmware ver. 6....

What is new in Nokia 6500s update firmware ver. 6.6?
Nokia N73. V 4.0812.4.0.1 Code: 0529786
Nokia 6500 Slide V6.6 code: 0556234

After updating mine yesterday...da screen refreshes or so flickers every say 5 seconds...plz any help
i have reinstalled it three times... ..still no solution
Message Edited by prubyholl on 04-Dec-2008 07:20 PM

Update/Insert Problem with Oracle Warehouse Builder

Hello,
i have update/insert problem with owb.
Situation: I have a source-table called s_account and a target table called w_account_d. In the target table are already data which was filled trough the source table inserts. Now anyone make changes on data on the target table. This changes should now give further on the source table with an update operation. But exactly here is the problem i can´t map back the data to source because that will create a loop.
My idea was to set a trigger but i can´t find this component in owb or is anywhere hidden?
Also i have already seen properties as CDC or conditonal loading in the property inspector of the table, but i have no idea how it works.
Give it other possibilities to modeling this case? or can anyone me explain how i can implement this eventually with CDC?
I look forward for your replies :)

Hi
thanks for your answer. I follow your suggestion and have set the constraints of both tables into the database directly.Nevertheless it doesn´t work to begin. In the next step i found by right click on a table the listpoint "configure" - I goes to "unique key" --> creation method and set here follow options: Constraint State = ENABLE, Constraint Validation = Validate. That error message that appears before by the deployment disappears yet. Now i start the job to test if the insert/update process works right. Finally it seems to work - but not really.
My Testscenario
1. Load the data from source table about the staging area to data warehouse table: Check - it works!
2. Change one data record in source table
3. Load the source table with changed data record once again to staging area: Check - it works!
4. Load new staging area table with the changed data record to data warehouse table: Check it works! BUT, BUT i can not recognize if it is insert or update operation, then under the design window by jobs execution windows is reported "rows selected 98", Rows inserted" is empty and "rows updated" is empty. So i think works not correct, then my opinion if it works correct it should show be "rows updated" 1.
What can yet now still be wrong or forgotten? Any ideas?
*By the way think not 98 rows there is not important if you make an update or insert which performance. It is an example table the right tables have million of records.*
I look forward for your answers :)

Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.

Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.i can't chat,compose mail nothing accessing.

Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

Automatic page updates causing problems with your screen reader

i want to know whats going on with this Automatic page updates causing problems with your screen reader and yahoo does not work and in order for me to even email you for this question i have to use internet exp I have found this complaint many times in the forum but with no real answer how to fix the dang thing will you please tell us what your doing about this problem and or do we have to go back to using internet exp there are more sights than yahoo that no longer work with mozilla please let us no what is bieng done about this problem if any thing
== URL of affected sites ==
http://
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SearchToolbar 1.1; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; eMusic DLM/4; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; InfoPath.3; .NET4.0C; AskTB5.8)

Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

I need help with my Nokia 5800 update to v40.0.005

Hey im having trouble with updating my Nokia 5800 to v40.0.005.
The version on my phone at the moment is v21.0.025 and when i try to update it on my phone it says no update available.
I tried downloading Nokia Update Software and getting it from there but the program wouldnt work either.
Is there any other way i can get the v40.0.005 were it should work? or even getting the knetic scrolling and applications without needing to get v40.0.005?
Please need help!
Thanks
Solved!
Go to Solution.

Under your battery, there's a product code on a sticker (X: 0586707). Go here: http://europe.nokia.com/support/download-software/device-software-update/can-i-update and type in your productcode to see if there should be an update for your productcode. If there's not, you could take your phone to a Nokia Carepoint and ask if they could do it - no promises. Or else you have to wait untill your productcode gets it.

Update nokia 5800 Express music problem

Hi all!
I wanted to Update my nokia using NSU and all i get is this: "No software updates available for your phone
Please note that your mobile service provider, operator or carrier may not have approved the latest Nokia device firmware available."
And my firmware wersion is: 11.0.008
Does that mean that i cant update my software?
Thanks.

It means that you can't update your phone with NSU at the moment.
What country are you from and is the phone originally intended for that country/region?
Is your phone operator branded/customized? If so, who is the operator?
Often with operator branded phones, it takes longer for updates to become available because the operator has to approve it.
And, unfortunately, sometimes the operators do not authorize/approve any updates (it costs them money to do so, I presume).

Firmware update caused problems with G4 AGP

Greetings all,
I have a great G4 Sawtooth 400MHz which I intended to upgrage by installing an OWC 1.2GHz processor using the 7455 chip which I was informed did not necessitate a firmware update to 4.2.8. After installing it, the machine would turn on but would not boot. OWC tech confirmed that I did indeed need to update firmware to 4.2.8 and that this had to be done while running under OS 9.2 which resides on one volume of my partitioned hard drive while OS 10.4.10 is on another volume. I reinstalled the 400MHz processor, changed the startup disk to OS 9.2 and carefully following Apple's proceedure successfully upgraded the firmware which now reads: $0004.28f1. All this went off without a hitch of any kind. OS X was then selected as the start up disk but the machine will only start up in 9.2.2 no matter what I do.
Attempts to boot from the OS X Install DVD holding down C key simply results in a blinking "?" mark indicating that OS X is not deemed to be a useable OS. This is confirmed by opening the DVD on the desk top after booting into OS 9.2 and choosing "install OS X". A message then appears : "Mac OS X cannot be installed on this computer. Please consult the documentation for the list of supported computers."
Other anomalies are: Only an instant of start up chime occurs. Of the 312MB installed only 64MB is recognized. System profiler indicates PC100-322S is recognized but the PC100-222S is "Not compatible". Sometimes the startup device is shown to be the volume containing OS X but the top disk shown on the Desktop proves to be the OS 9.2 volume. Only a quick LED wink of the caps lock key occurs when attempting to reset PRAM, no audible chimes. Starting with option key down produces an image of the two volumes and arrows but does not permit selection and will not proceed from there. Attempting to boot from a firewire drive with several bootable OS X volumes does nothing more. Booting from a Norton Systemworks 2.0 CD to check the OS 9.2 volume for errors changed nothing.
I have removed the battery for two hours before reinstalling with no effect. The battery is at full voltage of 3.6V. I have reset the S1 switch (PMU I think?) several times. I have started in open firmware to reset-nvram, set-defaults, reset-all. Nothing, absolutely nothing I have done changes a thing.
The machine is usless to me running only on OS 9 so I would be grateful for any suggestions or information as to how I could install an earlier version of firmware which may again run OS X as it has for many years. Although I think the problem is that it now identifies itself as a very early processor type which is not compatible with either the ram installed or OS X but I don't know how to tell the thing diffrent!
Thanks
Message title was edited by: Host

Thanks Dave,
You are a genius. I can't tell you how much I appreciate being benifit of your knowledge and willingness to share it with others. A thousand times over, thank you!! I burned the little utility to a CD on another machine/setup, ran the little sucker and restarted in OS X like a hoot!!! About 8 minutes later I had the processor upgrade installed and see quite an improvment. Again, thanks and kudos be upon you,
James

Nokia 5800 update problem

I have my nokia5800 for more than 3 months and all the time i was working just fine. But since I have updated to: Softwave version V 21.0.025, custom version 21.0.025.C01.01, type RM-356, Language set 04, it stopped working properly. Now from time to time when I unlock screen it shows me "colorful snow". Well, it would look like snow if it was white.

after UPDATING to V 21.0.025 Nokia 5800 XM is Showing Pixels color fading i so up set i love it the way it was nokia you better fix this before it permanently damage my screen. i live all the Way in the caribbean In the country of Belize i taugh you guys where the number one Cell phone makers in the world you let me down BIG TIME p.s i had to buy this phone from New York Flag Ship store In Long Island,NY dam i can't even take it there for you to look at it!!

Nokia 5800 XM Display Problem

I have Nokia 5800 XM with its version updated to V 21.0.025. I had purchased this phone in Jan 2009 and had no major issues till yesterday.
Today when I unlocked the phone I suddenly saw a scrambled greyish display with flickring lines.
I locked & unlocked the phone again, I got back the normal screen. I repeated locking & unlocking to check whether problem still persist or not, unfortunately the scrambled display showed up every alternate time I locked & unlocked the phone.
I thought, restarting the phone will get rid of this problem, but restart didn't solve the problem.
Then I thought of resetting the phone to its factory setting. I restored the phone to its original settings through *#7370# code but it was a futile effort.
I checked about this issue on the web and found that lot of other people are also facing the same issue.
for instance check the following video link which exactly demonstrates this display problem:
http://www.youtube.com/watch?v=Q9A7yd-2eeA
Now after a lot of reading on the web, I feel the display problem is a hardware issue and will get solved by Nokia Care people only.
I am really disappointed with Nokia for such a poor build quality of this phone.
I trusted Nokia for its superior build quality and durability and opted for this phone but it doesn't lived to its expectations.
Now lets see what happens when I take this phone to Nokia Care...

10-Dec-2008 09:46 PM
friedbrains wrote:
10-Dec-2008 11:26 PM
dan2007h wrote:
hi, i got my 5800 last friday and i think its a brilliant phone, but the screen randomly sometimes changes colour to red, green, blue and sometimes purple. I dont know if its a firmware problem (which i hope it is) or a fault with my phone.
Has anyone else experienced this problem with their 5800??
cheers
try to make a full backup of your phone's data and try to do a full factory reset... it might help, otherwise head to the nearest Nokia Care Point
how do you do a full factory reset??

Nokia 5800 XM battery problem

hi to all users,
i am using nokia 5800 xm.i have an problem with this model regarding battery.when i connect to charger to mobile it show charging but after some time when i unplug the charger from mobile it will show low battery and after restarting the device it will indicate full battery bars
can any one help me.....

Take back-up of your data.. and Go for Firmware Update / Re-install..If that does not help..do a Soft Reset by dialing *#7370# followed by 12345 (Default code) when prompted. If you have set your own code..use that instead. Be warned that Soft Reset will erase all data from the Phone memory and Restore will be necessary.. You will also have to re-install some of the applications..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Nokia 5800 XM homescreen problem/questions

Hello everyone,
I have a few problems with my 5800 homescreen:
The homescreen does not rotate when I rotate my phone. First I thought the motion sensor is disabled or even broken but then I noticed that the main menu and other applications rotate correctly. Am I overlooking a setting or is this a bug?
New emails do not show up on the homescreen. I've had an E71 before and new emails would always be displayed on the homescreen.
Contacts bar and shotcut homescreen cannot be displayed at the same time. This is really annoying, because the contacts bar was one of the main reasons I bought this phone - I did not expect that it eliminates all the other homescreen options I was used to from the E71.
Can anybody help me with these issues?
Overall the homescreen does not seem to be very flexible. I've already tried to upgrade my device firmware to see if any of these bugs were resolved, but I am still stuck at v21.
Solved!
Go to Solution.

Wow, all of these problems have been discussed dozens of times. Next time please search before posting, but here are answers.
1: No the homescreen does not rotate. It's not a bug, it's a "feature". Wait for a firmware update and hope that Nokia decides to do it right for a change.
2: No there aren't emails on the home screen. It's not a bug, it's a "feature". Wait for a ... blahblah
3: No, you cannot show the contacts bar and the shortcut bar at the same time. It's not a bug, it's a "feature". You know the drill. Also, no you can't show more than 4 shortcuts or 4 contacts at once.
Yes, the homescreen for the 5800 is only minimally useful. You'll learn to live with it. People are shouting for Nokia to add the widgets homescreen (like in the N97), but who knows if Nokia will see reason. At this point they're trying to keep the N97 boat from sinking at the dock, from the reviews I've read.
Ravi

Nokia X2-00 big problem with MMS receive

I have 2 nokia X2-00 and is a very good phone but mms is a big big big problem. So. If I want to send mms from X2 to other phone all is good and the image can be view very good on other phone. BUT. If I receive MMS on my X2, the image is very poor, very small, 101*75 resolution , 2,3kb. There are no option to modify the resolution of photo receive by mms. I done some tests with both nokia X2 and there is the same problem. Both phone can send mms with picture that can be see very easy and clear on other phone but can not receive mms with clear picture - all picture receive are very small. I think is a software problem. Is there an update for this problem? Practically I can not clear see picture by mms...they are too small to view, and can not be used for enything - not wallpaper, not album nothing. Thanks
PS - version 4.90 of the phone software does not resolve this problem

You may get some idea from the posts here..
/t5/Nseries-and-S60-Smartphones/Nokia-5800-shows-tiny-pictures-on-received-MMS-with-T-Mobile/m-p/449...
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Nokia 5800 Updated Firmware - Problems with Alarms

Similar Messages

Maybe you are looking for