Nokia 5800 XM dies when i try to make a call
Hi there!
I just got this problem, i tried to make a factory reset.. formated memory card, removed it... made factory restart again... notting helps... my nokia just dies when i try to make a call or even when i try to recive it... Does anyonehave any solution to this? It's really anoying thing...
Thank you for your help!
Greetings Jaka
Hmm, odd. It actually seems a hardware issue to me. Anyhow, you can try calling when there is no memory card inserted, to see if its an issue with corrupted system files on the card.
If that doesnt work, do a hard reset:
A hard reset (x6, 5800 and 5230 only) is done by the following (warning, this deletes all data on your phone):
1.) Turn off the phone and remove battery for 5min
2.) Reinsert battery
3.) Press and hold the green, red and camera buttons. DO NOT LET GO.
4.) While holding the three buttons, press the power key to boot the phone up.
5.) Keep on pressing until you see the country selection screen.
A correctly done hard reset would show you that everything on the phone (contacts, messages, calendar entries, etc) would be deleted. So it is advisable to back them up. Upon restoration, do not restore settings or files if possible.
If that still doesnt work, you'll have to take the phone to a Nokia Care Center.
If you find my post helpful please click the green star on the left under the avatar. Thanks.
Similar Messages
-
I just downloaded the IOS upgrade, 7.0.2, and now my iPhone 5 won't pair with my Bluetooth in my car, despite repeated attempts to re-pair the two and despite the fact it's been paired fine previously. The car system tells me it's paired but then when I try to make a call I get another message that says there is no paired phone.
You can't override it no matter what you do. The device has to connect to the server to complete the iOS update. You could try rebooting the iPad and see if that lets you connect to the server after it starts up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that will not work, you can try connecting to iTunes on your computer and see if the activation will complete. Sometimes when thes activation issues arise, you end up having to restore the device again, but first things first. Reboot and see what happens. -
Why do I get "No service" when I try to make a call or send a text message?
Ever time I want to send a text message this little loading bar at the top stops at ~80% and after a few seconds I loose signal and it says "No service".
Aslo when I try to make a call I don't hear a thing and then I get "No service". This is messed up and I have called my carrier and they told me to contact apple becquse they should fix it.It could definately be a hardware problem if your brother's sim had the same issue. A way to isolate a hardware issue would be to back up your phone and set it up as a new device (http://support.apple.com/kb/HT4137) Give it a test with no information on the phone. If it still doesn't work, it's a hardware issue. Where you have a 4s, you're definetly still covered in your limited hardware warranty (if you don't have the apple care) You could then make an appointment at the apple store (http://www.apple.com/retail/geniusbar/) Or call 1800 MY IPHONE to set up a mail in replacement. Good luck!!!
-
When I try to make a call it will go through and I can hear the other person but they cannot hear me, is there a setting that disables the speaker when using the headphones to try to make a call, also speakerphone automatically goes on when I start a call which I do not like, any suggestions how to fix this?
When I try to make a call it will go through and I can hear the other person but they cannot hear me, is there a setting that disables the speaker when using the headphones to try to make a call, also speakerphone automatically goes on when I start a call which I do not like, any suggestions how to fix this?
I also have this problem........... -
When i try to make a call it automatically goes to end call and back to my contacts
when i try to make a call it automatically goes to end call and back to my contacts
This is a common problem with iPhone 4s (and IOS 5) There isn't ' anything you can do about it, so you're best bet is to go down to the store and get an exchange. If you have an older iPhone (3gs/4) roll back your update from IOS 5 to IOS 4.
-
My contacts keeps closing when i try to make a call
When I try to add new phone numbers and contacts it blinks closed. I cant view contact details because it closes on me.
When I try to make a call it will go through and I can hear the other person but they cannot hear me, is there a setting that disables the speaker when using the headphones to try to make a call, also speakerphone automatically goes on when I start a call which I do not like, any suggestions how to fix this?
I also have this problem........... -
please help i cant make or recieve calls from my iphone if i try to make a call or recieve the speaker automatically picks up and i cant hear the person on the other endd and they cant hear me?
This is a common problem with iPhone 4s (and IOS 5) There isn't ' anything you can do about it, so you're best bet is to go down to the store and get an exchange. If you have an older iPhone (3gs/4) roll back your update from IOS 5 to IOS 4.
-
SAP instance dies when I try to make a change to the role and save
Hello Friends
I am an ABAP and XI guy, but am working on Enterprise Portal.
I have created an IVIEW (URL) and am trying to associate it with a user and role. I have created user and then when I try to assign role by clicking on AssignROles and then select a role and try to save, it consistently kills the SAP instance (dm36939 0) and this instance turns to yellow (instead of staying green). I have to restart this again. I have installed ECC and EP on this server and ECC (ABAP programs tables etc.,) works without any problem. EP also works most of the time, but consistently fails at this point as explained above.
I am not sure if there is any specific settings I should be looking at. Any feedback will be highly appreciated.
Thanks
RamNOone responded and so closing here to open it again in a relevant area.
-
My facetime says it looses the connection when i try and make a call ? Why ?
When I try and call someone else who has facetime through ipod on wifi , It wont ring and then it says Connection Lost . When someone calls me i accept the call but It hangs up because it says Connection Lost .
I have the exact same problem with my ipod! Ever since i have upgraded to IOS 6, whenever i try to ake a call it will say 'connection lost' and when i try to ring someone, it wont make a ringing noise and when i accept it again says ' connection lost' it has never done this to me before since the upgrade! could it be due to my network/wifi, im on orange?
-
How can I get to use my phone? When I try and dial out it says: 'You have not been given access to this service'
Have you chacked with your carrier. The message you are getting seems to relate to a carrier issue and not something to do with the phone itself
-
Just had this issue come up. When I go to make calls, it never rings. It will eventually cancel the call. Also, when people try to call me, they say it will either ring and never reach my voicemail or they will instantly get my voicemail. This does not occur on all calls. I have good/great service, have done a reset, checked my SIM card, checked airplane mode, etc. Nothing seems to resolve the issue. Anybody else dealing with this or know how to resolve it?
We want to get your calls back in action, duckcallr1! Did this start after installing new app or update? Have you tested this in different areas? Are your text and data connections still going through?
YaleK_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Both my wife ( iphone 3g ) and I ( iphone 4 ) keep getting a "call ended " messeage at random times when try to place a call. Is this a iphone issue or an AT&T issue?
Did you try going into settings>General>Reset>Reset Network settings
-
I had to reset my Iphone and now when I make a call it goes straight to an operator, do I have to take it in again to get activated?
Did you try going into settings>General>Reset>Reset Network settings
-
Facetime turns off computer when I try and make a call.
Everytime I try to make or recieved a call in Facetime my computer turns off. Is anyone else having this problem?
We want to get your calls back in action, duckcallr1! Did this start after installing new app or update? Have you tested this in different areas? Are your text and data connections still going through?
YaleK_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Any answers
I am having the exact same issue and have called customer service no less than 5 times, husband has called once. Every time I get a new answer. We've been told go buy new sim card from walmart (for $50???!!! Not going to happen for this brand new phone I just bought a week ago from Best Buy) or get one from my local verizon store (which, by the way, won't or doesn't do a THINK with prepaid cell phones). Been told our phone is no good and to return it. Been told we don't get coverage here. (Have been able to successfully make 2 calls and receive 1 so that can't be the case.) Twice we have thought the issue was resolved, only to find that when we hung up with the customer service rep, it was right back to where it was before.......we ported a number in from another prepaid carrier, which may be the issue as the phone worked before this. But, Geez, Verizon, I've had the phone activated for 1 week and have gotten to use it so little. By the way, texting and 4g LTE work perfectly! And Verizon, getting through to a human on that menu of yours? Hmm.....
Maybe you are looking for
-
Introduction: There is a date’s type field in the database. When using the field in the report, clients want to convert the field’s values based on own Time Zone to show the date field. Workaround: Currently, Reporting Services doesn’t provide the fu
-
ORAINST.EXE error in installing D2K 6i rel. 2 on P4 with Windows XP
Hi, I am trying to install oracle developer 6i rel. 2 in P4 with Windows XP. But it is throwing ORAINST.EXE file error. That CD works well in all othe OS on the same machine. Any solution? Tarek
-
Retrieving BLOB in CMP2.0 from Oracle 8.1.7.3
Hi all, In one of our project we are using CMP 2.0 and WLS8.1 SP2. While storing BLOB into Oracle (8.1.7) database we are not facing any issue. But retrieving the BLOB from the database throwing error. In weblogic.cmp.jar.xml I have defined the datab
-
Batch of .MOV stopped working after moving around some files?
I had a collection of .MOV video files (which were working fine) on a Mac Pro station, imported them into FCP 7... Still working fine. Then, decided I wanted them on my External Drive so I copied everything over to my external. Moved the originals i
-
MacBook Pro (13-inch Early 2011) not staring up at all
Hi Everyone, I have MacBook Pro (13-inch Early 2011). Since couple of weeks my Mac suddenly shuts down, when I try to restart it again I am not getting any response, no fan voice, no screen start up, no lights nothing. I read couple of blogs and foun