Nokia 5800XM maps not working

Hi..
I installed the new maps from my mobile's software updater but it is not functioning fluently
When I open maps,it shows me the menu but when I go to the map, the map starts loading itself after going online with my gprs connection. I left it for long time but still it did not load the map.It downloaded as high as 10MB data but still did not load the map.
Also offline searching is not working in my map.
Please help

chandan
Maps Loader is some software that runs from your PC.
You connect your phone to the PC through the USB connector and then run Maps Loader. Click on the + sign next to any of the main continents and it will show the country maps that are available for that region. You then select the ones that you require and download them. which puts them on your phone via the USB lead.
The same with voices, which is a separate TAB along the top. You can select what language you want and Male or Female voice.
Hope this helps.
History: Always Nokia since 1994 including Nokia 2140, 7110e, 6150, 6210, 6310i, 6230i, N82
Current: Nokia N8 (Anna - I have no intention of going to Belle) - and delighted with it!

Similar Messages

Nokia 5800XM Homescreen not Working!!!

I have recently updated my Nokia 5800 XM as follows:
Software version:
V31.0.101
Software version date:
16-09-2009
Custom version:
31.0.101.001.01
Custom version date:
16-09-2009
Language set:
11
Model:
5800 XpressMusic
Type:
RM-356
Latest update:
11/11/2009
After the update the phone was working fine for almost a week, the problem appeared when the battery went out and the phone subsequently turned off, when I plugged it to charge,I have got only the Nokia Logo white screen and the phone did not boot to the homescreen! After several trials of removing the battery which did not work, I tried removing the Memory Card which worked out but my problem now is that the Home screen shortcuts are not working as follows:
Dialler: Not working
Contacts: Not working
Calendar: Not working
Shortcuts: Not working, not appearing
Green button: Not working (does not get the dialler)
The tooltip that shows when I keep pressing on each of the above items does not read what it is (it seems it is missing the name and shortcut of the program running it). Only the Time and date, alerts links are working.
Also another note is that the dialler and contacts are working only whenI go to the Menu by clicking the green button or selecting the contacts.
Conclusion: it seems to me that the problem is only in the Home screen, also another note is that after the software update I am noticing that the battery is going out faster than before with the normal use of the phone, nothing intensive e.g. WiFi or bluetooth or GPS.
What I have done trying to resolve this issue unsuccessfully:
1- Restore Factory settings.
2- Format the Memory Card
I hope there is a solution for this! Also I would appreciate to know if there is a software that allows to re-install older versions of firmwares.

do a hard reset for the phone the memory card
(((dont forget to backup all your things on the computer)))
i had the same problem and fixed it by a hard reset for the phone
and then a soft reset
and a hard reset for the memory card((using my computer))
and then a soft reset in the phone
this solved the problem for me
3310,7210,3650,6600,6630,N70,N73,3250,N95,5800,5530

Alternate Access Mapping not working for Zone : Intranet

One of our client want to set Alternate Access Mappint (intranet) with url "intranet.theirDomain.com" with local IP address.
is it possible?
subsequest to my previous question (
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3f39711e-301a-40e8-aa7a-855fa2c268b1/alternate-access-mapping-not-working?forum=sharepointadmin )
I want to ask one more question
Can we configure "intranet.theirDomain.com" with local IP address for any other zone?
or
If there is ".com" within the url then it can't be configured for InTRAnet?
Thanks
S H A J A N

The names for the zones don't matter. You could use the 'extranet' zone for another intranet name if you wanted, the names are just to make it a bit more friendly for beginners.
What you describe sounds routine, you create a web application with a name, then use an AAM to allow users to access it with a more friendly name. Frequently you end up creating
http://intranet.domain.com and
http://intranet as an AAM, or vice versa.
You can use .com for an intranet site, you would need to add the site as an A Host record in your DNS server so that traffic is sent to your internal server rather than out into the wider world.

Value mapping not working properly

Hi All,
I am using value mapping twice in same mapping program. But only 1 field is coming with value and other is taking same value from source payload, can you please tell me what can be issue here?
Value mapping 1 -
Context - http://sap.com/xi/XI
SenderParty- SenderSchema
ReceiverParty- ReceiverSchema
Value Mapping table in ID -
Value mapping at field 2 -
Context - http://sap.com/xi/XI
SenderParty1- SenderSchema1
ReceiverParty2- ReceiverSchema2
Value Mapping table in ID -
Source payload -
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_VM_Send xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
   <Record>
      <Emp_ID>123</Emp_ID>
      <Name>rash</Name>
      <Surname>sumit</Surname>
      <Gender>Male</Gender>
     <Grade>E2</Grade>
</Record>
</ns0:MT_VM_Send>
Target Payload -
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_VM_Receiver xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
<Record>
<Emp_ID>123</Emp_ID>
<Full_Name>rash sumit</Full_Name>
<Designation>E2</Designation>
<Gender>M</Gender>
<Travel_Mode>Train</Travel_Mode>
</Record>
</ns0:MT_VM_Receiver>
Here travel_mode is coming perfect, but designation is same as defined in source payload. Why here Value mapping not working???
Thanks & regards,
Rashmi Joshi

Hi Rashmi,
The problem would either be in cache update or your mapping. Please provide the sceenshot of mapping (after clicking the value mapping function).
you can also choose the option to throw error in value mapping function, so it will throw error when value not found.
regards,
Harish

Camera, Browser & Maps Not Working

Hi,
It been since yesterday my Z10 camera, broser & maps not working.
Whenever I click the camera icon, it is not even opening.
Browser icon had changed, it turned to a triangle square & circle.
Can anyone help me out.
Thanks,
Chris

The update may not have loaded properly, you can reload this way: http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB34045&sliceId=2&docType=kc&noCo...
Or do a Security Wipe (Reset to Factory Settings) this way:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB33591&sliceId=2&docType=kc&noCo...
Please read both carefully !

My nokia store is not working

my nokia store is not working

Assuming you have a Symbian device you can download the Store QML Client from HERE. Just log in with your Nokia account credentials, download the installer and transfer it to your phone. Then just tap on the file to initiate the installation wizard.
This will replace the Store Client that is on your phone and also installs the correct QT dependancies.
Ray.

Apple maps not working on iMac

apple maps not working on iMac the little thing just keeps turning

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.Maps.plist. Move the .plist to your desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Nokia store does not working on c7

hi, after i formated my nokia c7, nokia store does not working. Is anyone else having same problem??

Install THIS and give it a go ... To download, you need to log-in using the SAME credentials that you use on this Forum ...

Nokia n95 youtube not works

i upgrade new software v30.0.015 rm159 so far works fine but youtube not works its open login but not streaming vedio if vedio works but no sound.
and i go through google search and than youtube vedio its works fine
but nokia 95 youtube not work plz reply thanks

Here in New Zealand if you wanna watch youtube you have to be in a 3g area.

Google maps not working with symbian belle upgrade

guys after recent upgrade with symbian belle google maps stopped working is there any problem will belle dose it support google maps 4.1.1

For those people still can't get Google map to work on Belle after the Wifi trick, a hard reset finally fixed mine! (No, a soft reset did not fix mine, but you should try it first.) Yea, it's a pain in the butt having to reinstall some apps and reconfigure preferences. But my phone also runs smoother and the battery lasts longer, as least it seems. I still need to turn on Wifi for Google map to start.
Detailed steps:
Do a full backup with Nokia Suite, just in case. (If you restore later, do not restore apps & preferences. Otherwise, Google map won't work.)
Put phone in Offline mode to end all calls and connections: Press Hangup > Offline
Try Soft reset first: Settings > Phone > Phone Management > Factory Settings > Restore.
Reinstall Google Maps.
If soft reset didn't work, try Hard reset: Settings > Phone > Phone Management > Factory Settings > Delete data and restore
Enjoy!

Nokia E71 & GPS Not Working

Dear All,
I have purchsed two E71s; one for my wife & one for myself.
I loaded Nokia Maps & could not get the GPS to connect to my position.
I went to the Nokia Store in Regent STreet London & they stated that it could take up to 30 minutes initially to find a signal.
A week later I am in the same situation.
I have reset the phone to factory settings & reloaded the maps & still nothing.
Is this a fault on the phone, if so I will return the device & notify you guys if faulty.
In the meantime, any suggestions would be appreciated.
M

losingmynerve wrote:
Not working with E75 either. It just keeps telling me GPS signals are weak indoors (or whatever) and I'm standing outside - on a damn airport..!!! What on earth could be wrong this time with this Nokia..?
I'm not familiar with the E75, but do you have Assisted GPS turned on? If not, it can take quite a long time to find the satellites if you've significantly changed your location since the last time you used the GPS function - sometimes up to half an hour. With Assisted GPS switched on it should only take a couple of minutes.
Large buildings, high mountains and other obstacles can interfere with getting a GPS lock, and can be quite a problem depending on exactly what angles the satellites are to your position. Electronic interference from radar could also be a factor at airports.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

Nokia C7 GPS not working after belle update!

Hi everyone, i had a C7, working great till i updated it with symbian belle.
okay here is what i did.
-my GPS was working on symbian anna with maps version 3.06beta
-i updated the phone to symbian belle from symbian anna.
-installed nokia maps 3.06 beta, and replaced the one that came with the update because it had the option of route planning which the installed map did not.
-this was the first time i checked to see if the GPS was working after the update, and it did not work even after i stood in an open field for half an hour.
-i learned that the latest update of nokia maps in fact had route planning, so i used the nokia PC suite to reset the phone software, and then later updated everything that was listed in the software update app.
-my GPS could still not work after i stood in the same damn field for another half an hour.
-now it will just give approximate positions based on the wireless networks, and not give any accurate position, so i cant use it for navigation anymore.
-i tried running the gpsinfoqt app, and it keeps saying searching for a signal, but it never finds one!
Please help me!! if there is any way i could flash the C7 or run a diagnostic or something so atleast i figure what is wrong!

Hi akkudub,
Welcome to Nokia discussions board!
Have you used Nokia Suite for the update?
I advise you to follow the steps below in order to get your GPS fully working again:
1) Uninstall the current version of Nokia Suite that you have.
2) Clean the registry with a registry cleaner.
3) On your PC, go to Start > Run and type %temp% and click on "Run". Delete all Nokia folders from the folder that opens.
4) Download the newest Beta version of Nokia Suite from this link:
http://betalabs.nokia.com/apps/nokia-suite-beta
You will need to sign in to your Nokia account - the same credentials used to log into this forum.
We will appreciate your feedback once you have tried this program!
Once Nokia Suite is installed, please connect your device to it and perform the available updates if any is available. Alternatively please reinstall the current software. Also, click on the Maps tab and download the relevant maps files (Europe, UK etc...)
Let us know how you get on and feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

NOKIA 5800XM - Calls not transferred to headset

Hi, I am Austin, I purchased a nokia 5800xm 2 months back and it worked flawlessly. I updated the firmware to 30v and it was even better, the headset that was bundled with the handset also worked fine, Butsince past week even though all the function keys on the remote and earphones work properly on the headset [radio/music player] when i get a call i cant hear it on the earphones but instead on the handset earpiece. I did a soft reset a few days back but after i installed a few apps the problem has resurfaced!!!
I have only installed opera 5 beta, myphone 2.2, pictureflow and a few simple themes nothing else...
Please help me!!! Im really confused if i should take it to the service centre or there is something i must enable???
Thanks

Hi
Easiest way to get a demo going is to do this:
1) Create a 'skill' in the RmCm subsystem menu in appadmin, call it Test
2) Create a Contact Service Queeu in the RmRm subsystem menu, and call is TestCSQ
3) On the CSQ properties, configure it for skills-based routing and add the 'Test' skill on the second page.
4) On your application, configure the 'icd.aef' script. This is a simple ACD type demo. Set the CSQ property of the application to "TestCSQ" (this must match your CSQ name identically)
5) Assign the Test skill to your agent in the RmCm/resources menu
At this point you should be able to dial your trigger and hear some prompts. If you log in as your agent, they shoudl received the call.
Note that to transfer the call to the agent, the CSS of the CTI Ports (i.e. the Call Control Group) must have the agent DN partition in it.
Also if you have only standard, you will need to create a Resource Group instead of a skill, and set that on the agent and the CSQ.
Regards
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

HELP ME! Nokia 5230 does not work after update

My nokia
5230 will not boot after update. I've also tried everything and red green camera button intedruken but nothing worked. Can someone help me I am so on vacation.
Sorry for my English I am Dutch

Have a look at this complete guide.. If nothing works, then the ONLY solution is to visit Nokia Care...

Type-mapping not working correctly, get "Unable to find a javaType for the xmlType" WARNING

I'm manually creating a web-services.xml file, and using the autogen ant task to
generate the codec XML/Java classes. The XML definition is provided by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG. The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service method
that has a complex data type (non-built in data type) is not being deployed into
the WebLogic server. But the other service method that simply takes a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
[web-services.xml]

Hi JD,
I spent a few cycles looking over your web-services.xml file, however I
don't have any suggestions other that one that looks like you have
already tried, at the top, in the <schema...>
targetNamespace="urn:sap-com:document:sap:business"
Making edits to these generated files can be tricky and my only
suggestion is to create a small reproducer to run by our outstanding
support team.
A quick look at our problem database shows one issue (CR095109) related
to a similar problem at deploy time that was fixed with 7.0SP3. Again,
the support folks will be able to help focus in on the issue.
Regards,
Bruce
JD wrote:
>
The first posting contains the wrong web-services.xml file. Please refer to this
one instead.
"JD" <[email protected]> wrote:
I'm manually creating a web-services.xml file, and using the autogen
ant task to
generate the codec XML/Java classes. The XML definition is provided
by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG.
The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have
registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is
simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the
SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service
method
that has a complex data type (non-built in data type) is not being deployed
into
the WebLogic server. But the other service method that simply takes
a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition
and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class
files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate
the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into
the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to
the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document
throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
Name: web-services.xml
web-services.xml Type: ACT Project (text/xml)
Encoding: base64

Nokia 5800XM maps not working

Similar Messages

Maybe you are looking for