Nokia 6020 : how to delete the GPRS Configuration?

Nokia give me 20 configurations for GPRS Setting. I'd use those 20. Now I need to delete some of them to setup for my new celcom number. I've never setup for GPRS Celcom Prepaid.
If i'm not delete some of them, I can't setup GPRS for my new number.
So, how to delete some of the GPRS Settings?
Thanks in advance.

Just go to Tools, then settings, connections & delete the access points that you don't need now, that's been downloaded to you!
I do think if you have already one set-up, you can't add another with the same type, unless you delete it!
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

  • How to delete the messages from SXMB_MONI which are already cancelled .

    Hi All,
    The messages were earlier in System error(Red flag) state so i cancelled it manually.
    I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
    if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
    can any tell me the procedure of doing it.
    thanks
    Sai.

    Hi AmitSri,
    Thanks for u r reply,
    What is retention period, where can i find this option.
    And i don't have authorizations to sxmb_adm --> configure delete procedure
                                                                             --> Define interfaces for archiving and retention period.
    and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
    Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
    Thanks
    Sai.
    Edited by: sai_SHA on Aug 17, 2011 12:29 AM

  • *HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY*

    HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY
    I have set the RMAN CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY; on my physical standby server.
    My archivelog files are not deleted on standby.
    I have set the CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default on the Primary server.
    I've checked the archivelogs with the FRA and they are not beign deleted on the STANDBY. Do I have to do something for the configuation to take effect? Like run a RMAN backup?
    I've done a lot ofresearch and i'm getting mixed answers. Please help. Thanks in advanced.
    J

    Setting the Policy will not delete the Archive logs on the Standby. ( I found a thread where the Data Guard product manager says "The deletion policy on both sides will do what you want" ). However I still
    like to clean them off with RMAN.
    I would use RMAN to delete them so that it can use that Policy are you are protected in case of Gap, transport issue etc.
    There are many ways to do this. You can simply run RMAN and have it clean out the Archive.
    Example :
    #!/bin/bash
    # Name: db_rman_arch_standby.sh
    # Purpose: Database rman backup
    # Usage : db_rman_arch_standby <DBNAME>
    if [ "$1" ]
    then DBNAME=$1
    else
    echo "basename $0 : Syntax error : use . db_rman_full <DBNAME> "
    exit 1
    fi
    . /u01/app/oracle/dba_tool/env/${DBNAME}.env
    echo ${DBNAME}
    MAILHEADER="Archive_cleanup_on_STANDBY_${DBNAME}"
    echo "Starting RMAN..."
    $ORACLE_HOME/bin/rman target / catalog <user>/<password>@<catalog> << EOF
    delete noprompt ARCHIVELOG UNTIL TIME 'SYSDATE-8';
    exit
    EOF
    echo `date`
    echo
    echo 'End of archive cleanup on STANDBY'
    mailx -s ${MAILHEADER} $MAILTO < /tmp/rmandbarchstandby.out
    # End of ScriptThis uses ( calls an ENV) so the crontab has an environment.
    Example ( STANDBY.env )
    ORACLE_BASE=/u01/app/oracle
    ULIMIT=unlimited
    ORACLE_SID=STANDBY
    ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
    ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
    LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
    LIBPATH=$LD_LIBRARY_PATH:/usr/lib
    TNS_ADMIN=$ORACLE_HOME/network/admin
    PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
    #export TERM=linux=80x25 wrong wrong wrong wrong wrong
    export TERM=vt100
    export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
    export ORACLE_HOME
    export LIBPATH LD_LIBRARY_PATH ORA_NLS33
    export TNS_ADMIN
    export PATH
    export MAILTO=?? your email hereNote use the env command in Unix to get you settings.
    There are probably ten other/better ways to do this, but this works.
    other options ( you decide )
    Configure RMAN to purge archivelogs after applied on standby [ID 728053.1]
    http://www.oracle.com/technetwork/database/features/availability/rman-dataguard-10g-wp-1-129486.pdf
    Maintenance Of Archivelogs On Standby Databases [ID 464668.1]
    Tip I don't care myself but in some of the other forums people seem to mind if you use all caps in the subject. They say it shouting. My take is if somebody is shouting at me I'm probably going to just move away.
    Best Regards
    mseberg
    Edited by: mseberg on May 8, 2012 11:53 AM
    Edited by: mseberg on May 8, 2012 11:56 AM

  • How to delete the listener service?

    Dear All,
    I want to delete the service of listener, because that service is not required.
    Please tell me how to delete the service.
    Oracle version is 9.2.0.5
    and os is windows 2003 server.
    Thanks In advance,
    Prathamesh.

    Use the Net Configuration Assistant. Start -> Programs -> Oracle Home -> Configuration and Migration Tools -> Net Configuration Assistant
    Or from the commandline: c:> netca

  • How to delete design time & configuration time objects permanently

    Hi All,
    how to delete the design time objects & configuration objects permanently, because i have created some objects repeatedly in different scenarios. there was some confliction, that's why i am going to delete the objects. Is it possible, if yes revert back to me asap.
    Thanks & Regards,
    Nag.

    hi,
    Check tis for how to delete IR objects.
    /people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
    and to delete it from ID delete it from the OBjects TAb.
    Activate the change list.
    Sachin

  • How to delete the activities are are yet to be released ??

    Hi I want to know how to delete the activities that are yet to be released in development configuration perspective in NWDS?
    That is, I have created an activitity, I have checked in as well as activated that activity, and now its apprearing in the waiting TAB, in transport view, in development configuration perspective in NWDS. Now i do not want these activities to be released, I just want them to delete, how can i do this ??
    there is nor delete option coming for them ??
    please help
    regards
    vicky

    If you can login to NWDI-> CBS -> Activities tab, search for the activities owned by you in the pending activities section. There I think you will not get the option to delete, but u have to release for transport. Then from the transport studio- u can go forward and select the delete button. Remember- once in transport view- any deletion-  etc can not be done from NWDS, you have to take help of NWDI administrator.
    Thanks.

  • How to Delete the dimension from the cube ?

    Hi ,
    how to Delete the dimension from the cube ?
    i have added the new dimension by assiging one characteristic to that dimension .
    now i  want to delete it ,
    but system saying that   Dimension ZXXX  contains InfoObjects; deletion not possible .
    how to delete it ? any help .
    Thanks

    Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
    Right click on the cube-->Delete data.
    Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
    Then right click on Dimension-->Delete
    Regards,
    Pavan

  • How to delete the one of cost centers in Splitting Structure(OKEW)?

    Dear All,
    I have a question about Splitting Structure as below? Could I get favor from you? Thanks a lot.
    How to delete the one of cost centers in Splitting Structure(OKEW)?
    Jocha

    Hi Chang
    Welcome to SDN! Its our pleasure to help you here
    Step 1: Select your Cost Center in OKEW which is assigned to the Splitting Str
    Eg: Cost Ctr 1001 is assigned to Splitting Str Z1... Tick the Check box against 1001 under Z1 Splitting Str
    Step 2: Do a Single Click on the text "Non Assigned Cost Centers"
    Step 3: Press Shift +F6 (Or Click on the Assign Button, next to the Pencil icon)
    Br, Ajay M

  • ADF Desktop Integration : How to delete the table in Excel?

    Hi,
    I am using Jdev 11.1.1.3.0 and Excel 2007 for Oracle ADF DI, I had created an ADF table using pageDef file in the excel. Now I wanted to delete that table and use a different pageDef file.
    I could not find a way to delete that table.
    I deleted full row of tables and then I used different pageDef file and created a new adf table. But when I am running this version of excel, I am getting runtime exception and excel is getting corrupted.
    My question how to delete the table not corrupting the Excel.
    Thanks
    Pavan

    Pavan,,
    Welcome to OTN.
    You can delete the table by selecting the top left column (of the table) and then select delete from the ADFdi tab.
    Refer the documentation for more info.
    http://docs.oracle.com/cd/E17904_01/web.1111/e10139/get_start_dev_tools.htm#ADFDI608
    -Arun

  • Reg:How to delete the column in table control also from database table.

    Hi Experts,
    Once again thank u all for giving the responses.
    one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
    With Regards,
    Saroja.P.

    Hi,
    If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
    "This portion of code inside the LOOP...ENDLOOP.
    IF sy-ucomm eq 'F_DELETE'.
       gt_itab2-check = mark.  " Store the MARK field status into your internal table's correspoding field 'check'
      MODIFY gt_itab INDEX tabcontrol-current_line.
    ENDIF.
    iF sy-ucomm eq 'DELETE1'.
      DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
    ENDIF.
    Now you can modify your database table using the MODIFY statement.
    MODIFY ZDB FROM TABLE gt_itab.

  • Does any one know , how to delete the others in itunes. it takes lot of space

    does any one know , how to delete the others in itunes. it takes lot of space, i wanna delete that... Actually what it contains

    Those are the data of the installed apps. Don't listen if someone says that it's an iOS, because it is not. On your iPhone, go to general > usage. It will show you all the programs installed on your iPhone. If you click any of them you will see how much of "others" it has (documents and data)
    There's no way to delete it if you want to still have those apps. You can reinstal those which has the most "others" but after some time of usage, it will raise again.

  • How to delete the films in VLC in my ipad?

    I sync some films(.avi) for VLC to my ipad via itune(I bought free VLC in ipad). One problem is too slow to see in ipad, many mosaic occurred. The other problem is how to delete the films in VLC on my ipad.. there is no any button to delete, only add button..

    But what if the videos don't appear in the list under the Apps Tab >File Sharing?
    They definitely are on the iPad. I can watch them with VLC. But the VLC list is empty when I select it. Most of my File Sharing lists are blank even though I can access the files I placed on there with my iPad. (Worse, Comic Reader has a list of files but none of those files are accessible on the iPad but a completely different set is readable on the iPad!)
    Any ideas?

  • How to delete the messages in the purges folder?

    if the mailbox is enabled the single item recovery, then the messages would move from deletion folder to the purges folder After running the following script,
    Search-Mailbox dave -searchdumpsteronly
    -deletecontent
    so my question is how to delete the messages in the purges folder with some script or retention policy?
    Please click the Mark as Answer button if a post solves your problem!

    Thank you all,
    As the mailbox is enabled single item recovery.
    I just want to make the items neither in deletion folder, nor in purges folder.
    So I think there are two ways to achieve this.
    Method 1,disabled the single item recovery. then delete the items in deletion folder ,so it wouldn't enter to the purges folder, it just deleted permanently. then enable the single item recovery
    Method 2,delete the items in deletion folder,then the messages move to the purges folder, then delete the messages in purges folder.
    the Method 1 is not so good ,as it need to disable the single item recovery firstly, then enable  single item recovery .
    So I want to use the Method 2
    Please click the Mark as Answer button if a post solves your problem!

  • How to delete the Sites in SAP IS RETAIL

    hello ALL,
    can any one explain me how to delete the Sites in Sap Retail.
    thanks in advance

    Hello All,
    Delete the plant / Site complete details and put in one transport and do the import & export.
    Thanks.
    Edited by: krishna cherry on Jul 26, 2010 3:28 PM

  • How to delete the old code in the EXIT_SAPLRSAP_001

    Hi All,
    In R3 system, I wrote an exit for 2LIS_11_VAHDR  by using T-code CMOD in the function exit EXIT_SAPLRSAP_001 and the code does not meet my requirement today i want to delete the code and i will write the fresh one. now my problem is i am not able to delete the code can any body suggest me how to delete the old code.
    and can we create new project and can we assign to the Enhancement RSAP0001.
    Can anybody suggest me in this
    Thanks in advance......
    Narendra

    Hi Narendra,
    You can put the code in comments, if you don't want to use the old code..You can delete also..But be sure that code belongs to you only..
    SE38>zxrsau01>change-->find out your data source
    Comment(Or can delete) the code starting from WHEN '2LIS_11_VAHDR'. to the end of the code that you have written..
    If you really want to delete the assignment of RSAP0001 to your old project>goto CMOD>your project name>change>delete assigment
    Then create a new project and assign the enhancement RSAP0001 to your new project and write the code in Include 'ZXRSAU01'..
    Hope it helps
    Thanks
    Teja

Maybe you are looking for