Nokia 603, doesnt switch on and shutdown after Nok...

respected sir,
i have recently bought a new nokia 603 ( march 2012 ) and didint used it much uptill now just 1 hour talk counter it runned uptill now, i upgrade it as soon as i bought it in the month of march, till 10th april it showed that your phone is up to date upgraded, but jsut two days before(12th april), i check online through wi-fi that its updates are availble of ( improved software size 24mb ), i didnt updated it as i was short of time, so i left it as it is, and didint proceed with the update ( i didnt pushed any button to start the update ). after aafew hours my frined called me and told me that Skype has started to work in Nokia 603 as it was not working prevoiusly, i checked in my phone just 5 mints and Skype really started to work, i just went to office, over thier i recieved a call from my client and during call my phone got switched off by itself, i tired to restsrt it, but it didnt, on way back to home i took the phone to NOKIA CARE PAKISTAN(peshawar) office, they told me your phone software is totally dead and we will try to put another software in it, i was so much depressed that how Nokia is using such sub-standard software that it corrupted in just afew days, i really felt ashamed of buying Nokia phone, as i am an old fan of Nokia phones but Nokia 603 really disappointed me.

Hi bilalaslam2020,
Welcome to the Nokia discussion boards!
Please accept our apologies for the troubles your device has caused you. This is not something that happens often and in your case, it may be just a bad software install.
As you have spoken to our Nokia Care in Pakistan, they will be able to deal with your issue promptly and fix your Nokia 603 as it will be still under warranty.
Let us know how you get on with this.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Similar Messages

My new Nokia Lumia 800 changes date and time after...

When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.

chrysale wrote:
I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps

IPad switches on and off after iOS update cannot backup no previous backups

Hi,
I would really appreciate some advice on this problem.
My parents updated their iPad, and apparently it got stuck for hours, after which they switched the iPad off.
From then on, the iPad keeps turning itself on and off, mostly showing the Apple logo, and sometimes the 'apps screen', but only lasting for at most 2 minutes before switching itself off again.
The unfortunate thing is there is no backup on iTunes. I tried connecting the iPad to iTunes, and backing up, which happens for some time, but then got the following errors:
1. iTunes cannot back up because backup is corrupt (checked other threads - there are actually no backups on the computer to be deleted);
or
2. iPad shuts down, causing the backup to stop. iPad turns back on itself, and backup restarts, but shuts down again after some time.
I understand we can potentially restore the iPad to factory settings, but that means losing all the data on the iPad. Would like to know if anyone has ideas how to fix this issue, or at least save a backup?
Thank you.

I don't think this will work because from everything that you have stated, I believe that the iOS is corrupt and will need to be restored but did you reboot the iPad? You just never know....
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can't backup the device unless it is operational. It just will not work.

Doesnt switch on after update to 10.3.1

after update was completed the battery was drained full and it doesnt switch on and it shows a bettery symbol with a cut on it

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, please try again but increase the wait time in step 4 to 2 hours, and perhaps as long as 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
It is also possible that the OS update was somehow corrupt. Due to the number of problems with "upgrading" to this OS level, I suggest you try the very clean and very forceful AutoLoader OS Reload:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sleep and Shutdown issues after upgrading to Windows 10

Hi there,So I'm having issues with sleep and shutdown after I upgraded to Windows 10, the laptop won't go to sleep or shutdown properly. The screen turns off, but the power LED stays on and the fan as well. If I chose sleep it won't wake up no matter what I try, and I'd have to perform a hard shutdown everytime.Any solution for this problem?Thanks.

**I have posted this in another area with the same issue** YES!!!!! A Solution that worked. Spread the news. It has to do with the Intel Virtualization Tehnology. Didn't know what that was until this issue came up in Windows 10. First, find out if this is your issue. 1. I installed the 'Intel Processor Identification Utility' directly from Intel.2. After installation, open the program and go to the 'CPU Technologies' tab.3. If it says 'YES' for Intel Virtualization Tehnology, proceed. Solution...(at least on my system) 1. The next thing you have to do is go into the BIOS. If you have not done this before, proceed at your own risk. You need to restart the computer and enter the BIOS (for me I hit F10 at the HP screen)2. Within the BIOS, there is an 'Advanced Options' section3. In this section there is a line for 'Intel Virtualization Tehnology' and it will say enabled or disabled. My computer said disabled.4. If this is the case, change the option to 'ENABLED'; then SAVE and EXIT from the BIOS. The Computer will restart and from that point on Shut Down, Sleep, etc. has worked. WOW this was a frustrating issue. Almost went back to Windos 8. I take no credit for this solution, I pieced it together from other posts on this issue. Hope this helps.

My iphone 4 conked out.it was not receiving signal so I switched on and off. But instead of taking me to the apps page it showed ios6 and asked me to go to itunes for an update.instead of updating it asked me to restore settings.now only logo appears

my iphone 4 conked out.It was not receiving cellular signal so I switched off and on.After switching on instead of taking me to the first page of apps it showed me ios6 tab and asked me to connect to itunes where it asked me to restore settings. which i did and waited for an hour and a half and later realised its got stuck. Now the phone does not respond at all and shows the logo and a half complete bar.Is there a solution to this, if at all. Am without a phone here ppl.Thanks

Did you do the update via iTunes?
If you are only getting the logo will want to try to see if can get device in recovery mode and try the restore process via iTunes again.
If you are still unable to get the device to restore will need a repair
Out of Warranty will cost
Just a heads up

Is really Nokia 603 supports Amoled Display from r...

i buy Nokia 603 Two months before and before i buy it i checked all specification it was IPS LCD display but now i checked it is written in specification at Nokia.com that Amoled Dispaly why and how??
i want to ask that does my 2 months before which i buy also supports Amoled and gorilla display??
is really Nokia 603 supports Amoled Display from released????
Solved!
Go to Solution.

Hi ar1397r,
Thanks for your feedback.
I have forwarded this to the website team. The Nokia 603 has a Clearblack TFT and not an AMOLED screen.
We have removed the duplicate posts you made, please see the forum guidelines if you have any questions on posting.
Thanks again,
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Nokia 603 problem with headset audio after updatin...

Nokia 603-White
Prior belle fp2 sound was working fine, after updating to belle fp2 headset sound turns too noisy, reinstalling update is of no use as i came to know that these update actually update the rom better to patched ROM. Once you have a buggy update it is hard to fix it by updating, The only solution i see is the BOX Flushing. I am pretty sure this is a software issue, as i have tried different headset and also changed the audio jack. Visiting the Nokia care is a pathetic experience. I already visited once, they charged me for doing nothing, when my cell was in warantee period. Cell was returned as it was. I don't believe on nokia anymore, i am expecting someone can help me in this situation.

It can be the same issue, as there are actually two microswitches in there: one for diverting analog output from the speakers to the phones, and another one for switching analog to digital when a TOSlink cable is plugged in.
Do you see a red dot of light way in the back? If yes, then the jack got switched to digital mode.

Nokia 6021 - Switching on and off

I have just received a brand new Nokia 6021 to replace a 6310i which was developing a fault with the on/off switch after 4 years.
Well, the 6021 is just about impossible to switch on and off. My thumb is now strained after so many attempts. The only way to it is get the edge of something hard and press down really hard for about 10 seconds and then it will switch on/off.
Is that how it is supposed to work?

Is it switching off & on without stop??!! anyway, if you have the chance to back up your data then restore factory settings or even using bluetooth to send that video to other phone first, if it's really not responding as you're saying, maybe a power cycle could be useful: turn off the phone by keeping the power button down until you feel 3quick vibrations and turn it back on after 1min, if your phone doesn't support this option, hmm... while am writing this i've had an idea you maybe changed where your camera should save pics so you might have it already on your MC, if not maybe anybody else here have better solution.

Nokia 603 keeps restarting after installing FP1 Up...

hey i just installed FP1 update using nokia suite, everything went smooth but my phone isnt getting up just booting again and again after intervals, please help fast

after a lot of research finally updated to fp1 successfully .update is not available here via nokia suite.
after tagging this post i downloaded the update again and faced the same problem as i said. i removed the sim card and memory card. then i switched the power button and surprisingly my phone started to take update !!!!!!!!!!!!!!!!!!!!!!!!!!!!
i dont know how, but it took update. enjoying it. this is just more than ossum and apps are working perfectly except x-plore.

Nokia 6230i forgetting time and date after 1sec ba...

Im used to that my 6230i and other nokia phones remember time and date after a sim card switch. The 6230i has now however started to forget time and date after sim card switch or just 1 sec battery removal.
What is the problem and how can it be fixed?
Thanks

Hi heraldo
There is I think a capacitor used to hold sufficient charge and this may now have failed. Entry level Nokia phones no longer retain time and date at all if battery removed.
Is your phone still under warranty?
Happy to have helped forum in a small way with a Support Ratio = 37.0

I have an iphone 4 for verizon and i am going to switch phones and get a droid motorolla 4g phone and the droid doesnt have a sim card. does my iphone 4 have a sim card that i can put in the droid? can i buy sim cards separately online for the droid?

i have an iphone 4 for verizon and i am going to switch phones and get a droid motorolla 4g phone and the droid doesnt have a sim card. does my iphone 4 have a sim card that i can put in the droid? can i buy sim cards separately online for the droid?

Brandon2184 wrote:
The iPhone 4 uses a "Nano SIM"
The CDMA iPhone 4 does not use a SIM at all. There is no SIM slot. It is a pure CDMA phone.

My iphone 4 is dead after I updated to ios 6.1.3 it doesnt turn on and doesnt respond to itunes also. Visited Apptronix service desk but they say there is nothing they can do about it, and they have charged INR 10640 for a new one. Is there anybody same..

My iphone 4 is dead after I updated to ios 6.1.3 it doesnt turn on and doesnt respond to itunes also. Visited Apptronix service desk but they say there is nothing they can do about it, and they have charged INR 10640 for a new one. Is there anybody with similar problem....

Hm... Try this----> http://support.apple.com/kb/ht1808 or http://osxdaily.com/2010/12/04/ipad-dfu-mode/

After a one week logout and shutdown my macpro 1,1 laptop shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

Startup – Black screen with cursor
Startup Issues - Resolve
Startup Issues - Resolve (2)

TS3048 unable to connect to keyboard. System does not detect keyboard even after switching on and off. Mouse working fine. Earlier was working fine. Keyboard is not detectable by I mac . Tried a different keyboard same problem.

Changed batteries of keyboard -initially connected but now does not connect. Used a diffeerent keyboard -same result. Keyboard not seen in bluetooth devices.Switching on and off as well as re booting has not helped. Keyboard light continues to blink.

Hey Gautam5058,
Thanks for the question, and welcome to Apple Support Communities.
The following articles provide troubleshooting steps that may help to resolve your issue:
Apple Wireless Keyboard: Difficulty during pairing process
http://support.apple.com/kb/TS1569
Bluetooth Quick Assist
http://support.apple.com/kb/HT1153
You may also want to try resetting your computer's PRAM and NVRAM.
To resolve this issue:
1. Turn the Apple Wireless Keyboard off.
- For an aluminum Apple Wireless Keyboard, hold the keyboard's power button for more than 3 seconds.
- For a white Apple Wireless Keyboard, turn over the keyboard, and turn the power switch to the off position.
2. Click the "Continue" button as the Setup Assistant instructs.
3. Power the Apple Wireless Keyboard back on.
4. Enter the 8-digit passkey and press Return. Important: You MUST press Return after you enter the 8 digit code.
Thanks,
Matt M.

Nokia 603, doesnt switch on and shutdown after Nok...

Similar Messages

Maybe you are looking for