Nokia 603 problem with headset audio after updatin...

Nokia 603-White
Prior belle fp2 sound was working fine, after updating to belle fp2 headset sound turns too noisy, reinstalling update is of no use as i came to know that these update actually update the rom better to patched ROM. Once you have a buggy update it is hard to fix it by updating, The only solution i see is the BOX Flushing. I am pretty sure this is a software issue, as i have tried different headset and also changed the audio jack. Visiting the Nokia care is a pathetic experience. I already visited once, they charged me for doing nothing, when my cell was in warantee period. Cell was returned as it was. I don't believe on nokia anymore, i am expecting someone can help me in this situation.

It can be the same issue, as there are actually two microswitches in there: one for diverting analog output from the speakers to the phones, and another one for switching analog to digital when a TOSlink cable is plugged in.
Do you see a red dot of light way in the back? If yes, then the jack got switched to digital mode.

Similar Messages

Nokia 603 problem with touch

Dear Support,
I have a problem with my new 603 device. The button at the most left bottom side of the screen which is above the green call button is not responding to touch and not functioning.
And to use any functionality at this location I have to swipe the phone.
Can you please help me with that.
Than,
Regards

is it original? I it is take it to nearest nokia customer care and they will fix it for free or replace your phone. Note: your warranty must be valid. It is usally valid for 12 months after use. If its not original, sorry next time buy original
divesh747

Problems with auxiliary audio after iOS6

I have a weird issue that doesn't seem to be addressed on any other threads. Hopefully someone can help.
My wife had a 3GS and she listened to music (mostly Spotify) through her car stereo via an auxiliary cable. This worked fine until she updated the phone to iOS6 late last year, at which point music would no longer play through the car's left speaker, only the right.
The problem wasn't with the car or the cable, because I have a 4S, also updated to iOS6, which played (and still plays) just fine through both speakers using the same auxiliary cable.
What makes it stranger is that I got my wife an iPhone 5 for Christmas. She still has the same issue that she had with the 3GS - no sound through the left speaker of the car. But plug in my 4S, and everything works just fine.
I'm lost. Any ideas out there or similar problems?

Possible solution here...
I have an aggregate of two interfaces with 16 channels. I can address now all inputs an outputs, but the slave interface doesn't meter anything and i don't hear anyting on the outputs routed to the slave interface. Also some debug output is printk'ed:
AM824NuDCLRead::Start() failed: 0xe0008020
Finally, after a night long research, it is working as proposed.
My setup now en detail:
Mac Book Pro 2,4Ghz/3GB RAM/OSX 10.5.4
2 lynx aurora 8 / LTFW
1 Lynx / Internal Clock
2 Lynx /External Clock (via 75 ohm cable)
Uplink of the devices with a gold fw cable.
Link to the 1394a port via gold cable to the mac book.
I use an aggrgate of two devices 16/IN 16/OUT.
Problem was:
No sound on the slave Interface.
Problems that i found out:
Never run pppd via WLAN in the background.
A crosseffect letting the Systems Panel die and the devices are not accessbible.
After turning off wlan (dectivate) the interfaces are accessible again.
A weird crosseffect i mean.
Problem in the Audio-Midi Setup -> aggregate device:
BE SURE TO SELECT THE MASTER INTERFACE AT FIRST, OTHERWISE THE PLIST FILE IS WRONG, SINCE THE CLOCK HAS ALSWAYS ID 0 IN THE PLIST FILE.
IF SELECTING THE SLAVE FIRST AND THEN SELECT THE MASTER CLOCK, THE PLIST FILE IS WRONG. CAUSE THE MASTER CLOCK IS THE SLAVE AND HAS ID 1 , WHICH IS ACTUALLY WRONG.
Hidden File with aggr. config: /Library/Preferences/.GlobalPreferences.plist
To view copy the file in your home dir in the console like: cp /Library/Preferences/.GlobalPreferences.plist ~/test.plist.
Open the property list editor and select Your home directory.
View the properties.
SO, SELECT THE FIRST DEVICE AS MASTER CLOCK AND THEN THE RIGHT INTERFACE HAS ID 0. THEN SELECT THE SECOND ONE.
NO TROUBLES IN THE KERNEL ANYMORE. NO ATCP TIMEOUTS:-))
This solutions works for me now.
http://www.lynxstudio.com/forum/forum_posts.asp?TID=2250&title=two-aurora8-with- logic-8

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

Problems with M-Audio Fasttrack Pro and Garageband after 10.5.2

Hi all,
I use GarageBand daily with my M-Audio FastTrack Pro and have had absolutely no problems until I installed the 10.5.2 update.
Suddenly the Audio randomly cuts out when I'm recording, monitoring or playing back - also my recordings appear to skip and jump too. Usually I can rectify it by power cycling the Fasttrack but the problem re-occurs after about 30 seconds of recording.
I have double checked the I am using M-Audio's latest drivers and have repaired permissions and the disk. I was wondering if anyone else had had any problems with this?
All help would be appreciated, looks like I'm going back to 10.5.1 though.

Hi !
Still no answer from M-Audio but it seems that they are not in cause.
I read on several topics of Apple's Forums some similar problems with other audio devices and also with some USBhubs.
I ran some little tests and for my case, using the other USB port of the MacBook seems to resolve the problem (but that's not a permanent solution for my point of view).
Using a selft-powered USBhub works also, even on the port that makes it crash without hub.
As I studied a little bit of electronics, it looks really like a problem of power supply through USB to me. It could be some kind of micro-cuts (or micro-undervoltage) that are sufficient to cut the audio stream and freeze a bit the system but not enough for MacOSX to switch significantly to the internal audio.
But two questions still remain :
Why one USB port of the MacBook and not the other one ?
Why since 10.5.2 ?
Steve, if you hear me ;o)
'Hope they will react quickly !

After upgrade to iTunes 11 "iTunes has detected a problem with your audio configuration"

After upgrading to iTunes 11 I have lost all sound on my PC running Windows XP. When I try to open iTunes I get the following message: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." I have also lost sound when I attempt to listen to audio from a Website while in a browser session. I notice I have also lost the volume setting icon from the system tray in the lower right corner of the screen.
Please advise.

Something went wrong during the upgrade to iTunes 11. I have lost audio on my desktop PC running Windows XP. No sound in iTunes: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." No sound during browser sessions. The volume control icon disappeared from the system tray in the lower right corner of the screen.
It seems that an audio driver(s) were damaged or deleted. When I go into the Control Panel and check the reading for the audio hardware, the entry for the DVD/CD-ROM drive says:
"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
Click Troubleshoot to start the troubleshooter for this device."
Please advise.

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Tell Apple about it: http://www.apple.com/feedback/iphone.html
Be sure to give as much detail as possible.
I would also check LG's site.

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?

only $99, i thought it was closer to $175.

When I go to open Itunes I get a message that says "Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly.

When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

ITunes has detected a problem with your audio configuration, audio/video

When i open iTunes i recieve a message saying "iTunes has detected a problem with your audio configuration, audion/video playback may no operate properly." iTunes opens fine after i click ok on the message. However when i push play to hear a song nothing happens, the time for the song remains at zero's.

This error can be caused by a bad installation of QuickTime. Remove iTunes and QuickTime, and reinstall iTunes (which will reinstall QuickTime). You can find the steps to remove and reinstall near the bottom of this article in the Apple knowledege base.

ITunes has detected a problem with your audio configuration...?!!?!?!?!?!

i get thins message when i open itunes...
"iTunes has detected a problem with your audio configuration. Audio/Video playback man not operate properly."
HOW DO I FIX IT??

Sounds like several people still have this problem... including me.
I upgraded to a new PC (still running XP , installed iTunes 8.0.2.20, reloaded my library...
And I got the "iTunes has detected a problem with your audio configuration" error.
I've deinstalled and reinstalled Quicktime to no avail.
iTunes seems to launch okay after the error.
But when I select a song and click "play", the song and time-counter show up correctly, but the song does not play... the "play head" stays stuck at 0:00.
I've imported new CDs, and the problem is the same with them.
This sounds like an unsolved problem... where do we go from here?

Itunes has detected a problem with your audio configuration. audio video playback

itunes has detected a problem with your audio configuration. audio video playback may not operate properly. Why do i get this after update cant get sound now please help!

See if this article will help:
iTunes for Windows plays video files without any audio
http://support.apple.com/kb/TS1696

ITunes has detected a problem with you audio configuration

"iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." got this error after update to Windows 8.1

If you do a google search of this "error" message, there are some good links to how to fix it, assuming it's a problem with Quicktime. I took a look at my programs file and found that it somehow had been deleted. After downloading again, though, I still had this problem. Turns out I had a problem with the actual speaker software of my computer - the icon in the lower right corner had the 'mute' symbol, and was stuck there. When I went to change that to actually playing sound, the computer did an analysis on its own and fixed the problem, which fixed the problem in iTunes too.
Good luck!

Problem with Creative Audio Control Panel

) Heya, I just bought a SB X-Fi Xtreme Audio and I've encountered a problem with Creative Audio Control Panel. My OS is Win7 x64; I have installed the newest drivers for SB. The problem is that I can't set my setup for headphones. I mean I can do that and it's working untill I turn off the PC or restart the system. After that it always sets for 2/2. Speakers. Any ideas how to make this thing to remember my settings the way I want it's Thanks!

- The problem seems to be fixed Here's the solution for my card: <a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493" title="Linkification: http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493"]http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493[/url]

Nokia 603 problem with headset audio after updatin...

Similar Messages

Maybe you are looking for