Nokia 6070 and pcsuite

hi i wanted to connect my new 6070 to a pc using the nokia pc suite, without any luck.. i both tried the localized, hungarian version, and (after uninstalling the previous) the european (english) (v6.81.13), but non of them worked. i would like to use IR connection, and it seems to be working, as windows recognizes my phone, and if i let it connect to the net, it even downloads a (non-signed) driver for nokia 6070 (the pc suite gave the same error before and after installing the windows driver) the pc suite scans for the phone for a long time, then gives the error shown on this picture. if you have any ideas, please let me know thanks adam

Hi radarbailey,
Seeing as the phone has got wet this could be a varierty of problems here.
Try a different battery, i have seen a couple of times where a water damaged battery puts the phone into these modes.
Although the above is unlikely it might offer a quick and cheap result.
If that does not work, you can be fairly confident that the phone is not worth getting fixed as the cost of repairing that handset would out weigh the cost of the handset.
Message Edited by adamf on 10-Sep-2008 02:20 PM
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Similar Messages

  • Nokia 6070 and Mac

    Hi!
    How can I transfer pics from my Nokia 6070 to a Mac computer?
    thanks !
    jan

    how can i send messages from my mobile 6070 messages are not going from my mobile. the problem is when i type the message and go for send option then the answer on mobile is message is not sent

  • Problems with Nokia 6070 and CA-42 cable

    Hi I have Nokia 6070, CA-42 cable, downloaded newest Nokia PC Suite (6.82), but I still have problems with connection. When I plug cable into the phone, it say : Data enhancement connected, and then Enhancement not supported. I properly installed Nokia PC Suite, but I still don´t have connection, because PC can´t recognise my phone. I tried many advices written here on discussion, like repairing cable drivers, re-installing PC Suite, restarting PC, but nothing works. Could you give me advice ?. Further informations in attached screenshot. http://img250.imageshack.us/img250/1193/nokia3in.jpg regards Viliam Tomaníček, Slovakia

    12th Jan, 2010
    Ok guys let's see if this helps...  the problem is NOT Nokia PC Suite, the USB to Nokia Enhancement connector ie; the CA-42 data cable, your cell phone or your computer. 
    It's in your computer' settings... The answer to this problem with this particular cable is actually in the Nokia PC Suite "Help".  It's  under "Configuring connection types"  They  refer to it by name. 
    Unfortunately, (1) you kinda have to stumble into it... thank goodness I did and,   (2) you kinda have to be a bit of a computer geek to understand what they are trying to say... 
    The point is that they are basically tricking the computer to "see" the USB cable as a 9 or 25 pin serial DIN cable connection that would normally go into the COM1 or COM2 ports, which are still on the back of some PCs, but not available on modern laptops anymore. 
    My PC is Windows XP Service Pack 3.  I will describe what I had to do to get the cable to work.  Vista and Windows 7 users… just follow the principle. 
    You need to (1) configure Nokia PC Suite as well as (2) your PC/Laptop (in Control Panel) to "see" the USB connection as - COM3... here's how I did it for my PC. 
    Step - 1:  Install the CA-42 Cable Drivers first using the install CD that was provided with the cable using "Found New Hardware"  remember this is the XP experience... 
    Some preamble - I thought that installing the Nokia PC Suite does all the cable driver bits as well, but it looks like you actually have to install the cable drivers (Note – cable drivers first) and then the Nokia PC Suite app software separately.  I got a “file not found error - ser2pl.sys” installing Nokia PC Suite.  You don’t get that when you let the “Found New Hardware” wizard install it from the install CD. Don't restart your computer until the end of this rather lengthy two-step process... just click "Restart later"...  I'll tell you when to restart... 
    START POINT (Still Step 1) - Ok, so now we are starting....
    Shut down your system...
    Plug in the CA-42 USB cable into a USB port.  Important here… if you have a PC, decide on which USB port you are going to use ie; front or back USB ports.  If you successfully install the cable drivers on one USB port, you cannot go taking out the USB cable and sticking it into another USB port on the same computer.  You will lose the cable driver install completely.  However if you plug the USB cable back into the original USB port used to install the cable driver software, it will re-appear in “Device Manager”.  Maybe it does the same with laptops as well, I do not know.. 
    Turn on your system...  do not connect your phone to the CA-42 cable yet. 
    On restarting, Windows will find new device (CA-42 USB to Serial), try to install it automatically and come back and say... it was not installed properly (probably because of COM port conflicts)... let that finish, close it off and ....
    While that was happening a "Found New Hardware"  wizard will appear...let it happen.. do not close this.. let it sit and wait, we want to use this.... it is going to ask for the install CD, but guess what... when you insert the install CD (at least, if it's the same as the on I got) it’s going to kick off yet another install process.   
    Put the supplier's install CD in your player, that is going to kick off the CD's automatic install (autorun.inf),  cancel it off.. do not run the automatic CD's install, it will not work !.  Continue with Found New Hardware and let Windows find the CA-42 cable drivers on the install CD (from your drive D: or whatever) and install… do not restart your computer yet.
    At the end of this, if you check Settings - Control Panel - System - Hardware - Device Manager - Ports (COM & LPT),  you should see an entry for - "CA-42 USB (COM something).  That COM something will probably be COM1 or COM2.  Highlight this and right click.. go Properties, Port Settings, Advanced – In XP, there is a box to select “COM Port No.”  Set this to COM3.  The driver should say that the “device is working properly”.  Click Apply, OK and exit Control Panel….  Do not restart yet.. 
    So now we have XP set… let’s set the app…. Nokia PC Suite 
    STEP 2 – Setting Nokia PC Suite. 
    Some preamble - In July 2009, I bought version 6.4.8 of Nokia PC Suite with the CA-42 cable.  I installed it and I was unable to get the cell phone to see “Nokia PC Suite”.  After much trial and error, I flung it aside. 
    Well this past weekend , I decided to have another go at it. 
    I uninstalled it and downloaded and installed a more recent version from Nokia’s support site… version 7.1.40.1  … cell phone still giving “Enhancement not supported” message.  Could not believe that I was that unlucky… 
    Again after much trial and error, I got it to work – a classic case of the simplest thing being so darn difficult…. So here goes.. 
    Download the latest version of  “Nokia PC Suite”, if the version you get is the one I got (7.1.40.1), , then you need to -  
    Do not connect the CA-42 cable to your phone yet.  It should be connected to your computer on the USB end in it’s original install USB port !!
    Start up Nokia PC Suite - Go Settings, Manage Connections
    Tick off only “Serial Cable (CA-42), this should be in the list assuming you installed it correctly in Step 1
    Highlight it and the little spanner (Configure) at the bottom should now be enabled
    Click on Configure.. the little spanner
    If it is saying “COM1” click on the little down arrow to the right.  COM3 should come up in the list
    Click on COM3… stop right here,  do nothing
    NOW….  you plug in the Enhancement end of the cable into your phone.  If it still gives the “Enhancement not Supported” error, don’t panic.  Make sure the cable is into the phone nice and secure.  By the way, this cable tends to get “Disconnected” with the slightest movement of my almost 4yr old Nokia 6101.  Make sure you are not using the phone and the phone is in standby mode.  The phone MUST NOT be in “Contacts” or some other menu available in the phone otherwise it will not connect to Nokia PC Suite… STANDBY MODE please… I am sure I frustrated myself unintentionally by not paying attention to this detail. 
    Right, NOW you click on OK (the green check mark) … assuming everything else was done properly, after about 10 seconds, the model no. of your phone should appear in Nokia PC Suite.  If you get this, you are going to have a blast with this software. 
    So cool – using my PC….. I have since been able to delete off a lot of junk (from inbox, outbox, images etc) and free up valuable memory, amend Contacts info, do a full backup of my phone onto my PC, load in a truncated MP3 file of Doobie Brothers, "China Grove" as my ringtone (...made it myself with a free MP3 editor - 1st 30 seconds – 433Kb… yeah huge… but worth it) etc…  
    Still getting the hang of this software…. The only digital camera I have is the one on my phone, so now that I can take pics and get them into my PC so easily, I am going to have a lot of fun with this software as well as with other aspects of it that I am not aware of yet..  I still have to install some kind of “Modem” drivers from the CD, and there is something about upgrading your phone software….. 
    It has only been three days since I got it to work but, folks..  This Nokia PC Suite is outraaaaaageous.  !!!!!!!! 
    Oh I forgot…. Now you can restart your computer.   
    PS.. Whenever I restart/shutdown my system, I have to go and do the COM1 to COM3 part again in Nokia PC Suite when I turn it back on.  I have not found a way to save the setting.  Will try to attach a pic (yep….  taken with my phone, and downloaded into my PC !!!) of the CA-42 cable and CD that I got. 
    Hope this helps.. 
    The "Add Attachments" button below is not giving me any feedback.... some help please ?

  • Nokia 6080 and DKU 5

    Hi everyone,
    I have a Nokia 6080 and i bought a new DKU-5 Data Cable, I downloaded the latest nokia pc suite from nokia website., and the DKU cable driver from the Nokia Site., when I run Pc suite according to the steps it says connect your data cable to your pc and your mobile to your cable, I did the same but my phone displays "Data enhancement connected" and immidiatly it displays "Data enhancement not supported", Someone kindly tell me the steps to make it work properly,.
    Thank you
    LR

    The Nokia 6080 needs a CA-42 cable go the site below for compatibilty list of Nokia cables.
    http://europe.nokia.com/A4678148
    If you don't want to spend again on cable use IrDa it is supported also in pcsuites for your phone, it wil work just fine.
    Message Edited by android on 16-Apr-2008 12:37 PM
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • Nokia 6070 front cover removal

    Well, I have extreme troubles with getting my PC and Nokia 6070 connected via irda. So my mobile has been repaired in Nokia services twice already. It didn't help. But never mind.
    What irritates me now is that after those reparations the screen under the front cover got dirty and have now even a nice fingerprint. These are great proofs that when you work in a service you can remove the front cover of 6070 to make it dirty. But I have no idea how to remove it in a mobile-friendly way to make it clean again. I want to replace it after I'm done with cleaning and it would be great if it looked then as good as it did before.
    Thank you for any suggestions and support,
    Daedhel

    If you attempt to remove the cover yourself you will void your 2 year warranty, it's best to take it back the Nokia Service Centre.
    Nokia N95
    V 20.0.015
    0546553

  • Unable to connect to NOKIA 6070

    I have bought a USB cable for the NOKIA 6070. I connected phone with computer and can access contents of the phone. It works so slow and USB device recognized as Serial device?
    What is that compatible mode?? When I connect phone to the PC I didn’t get any message in phone…
    NOKIA 6070 modem also not working…. Or not installed…????

    Hai.. friend
    Buy cable DKU_5 to your nokia 6070,first you must instal pc_suite and than conect to phone,I Think it work(can acces tranfer file and message.
    For Modem you can chouse Standard 33600 bps Modem and go to internet.
    Don't acces internet from pc_suite it doen't work for nokia 6070.

  • Nokia 6070 email/sinc settings that will actually ...

    I would like to know which email providers settings actually work with the nokia 6070's email application?
    also how do you server sinc? and which servers are available for this purpose?

    You may want to check these:
    http://forum.devicescape.com/index.php?topic=852.15
    http://forum.devicescape.com/index.php?topic=939.15

  • Nokia 6070 stuck in headset mode

    starting today my nokia 6070 is refusing to go out of headset mode without ever having had a headset. I reset factory settings and nothing seems to work. Anybody have any idea's?
    Solved!
    Go to Solution.

    I believe the 6070 is a pop-port phone, and what you're describing is characteristic of moisture or corrosion inside the connector.
    Take your handset to the nearest Nokia Care Point, they will clean it out for you and you should be right as rain afterwards.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • 6230i and PCsuite connects momentarily then discon...

    Ok I have posted this as reply elsewhere, but had no response so I am starting a new thread in the hope that someone wiser than myself will see this and offer some help.
    So, Im yet another of the gazillion PCsuite users who is suffering from this issue:
    PCSuite6.84.10.3 connects bluetooth momentarily before disconnecting from my 6230i.
    Ive read through many many threads, and cannot find a consistent response which resolves this issue. PLEASE SOMEONE let me know the fix or where I can find it before I upgrade to a SonyErikson!I had my phone stolen and trying to get my contacts back onto my new phone with ZERO success.
    How can so many suffer from this same issue and not a word of advice or at least apology from Nokia!! And if its not fixable please let me know so I can stop wasting my time and simply upgrade to a compatible phone.
    Anyway, enough rant. Thanks for your help in advance
    copic
    PS
    I tried
    Start -> Run -> services.msc, right-click on Bluetooth Service, hit Start.
    it was already active, and repair made no difference.
    so thats not it
    PPS
    service info:
    Operating system:
    Microsoft Windows XP
    Build 2600
    Service Pack 2
    Language: English
    Language for non-Unicode programs: English
    Locale: English
    Input language: English
    Nokia PC Suite:
    Version 6.84.10.3
    Language: English
    Connectivity Cable Drivers:
    Version 6.84.4.0
    PC Connectivity Solution:
    Version 7.22.7.1
    Bluetooth stacks:
    WIDCOMM Bluetooth stack
    Version 3.0.1
    Build 803
    Microsoft Bluetooth stack
    Version 5.1.2600
    Build 2180
    ...............anyone?

    ok, so spoke to Nokia (moody support), who also suggested the problem may be with WIDCOMM stack, then also spoke to DELL support (as always amazingly helpful).
    So yes I have unistalled WIDCOMM and my PC automatically activated Microsoft BT stack. AND WADDYAKNOW it WORKS! Brilliant! I have succesfully updated my contacts, havent tried anything else. But that is all I care about. Thankyou for your help and advice.
    Interestingly when I had the same problem a year ago, DELL suggested I updated and reinstall WIDCOMM BT. WHich I did, and for a while this resolved the issue. Now it seems that MICROSOFT BT stack resolves the issue. Go figure.
    Perhaps this is to do with the current versions of firmware and PCsuite?
    Anyway just happy to have contacts sorted. thanks again.
    copic

  • NOKIA 6070 MODEM DRIVER

    Hi!
    I need to download nokia 6070 modem driver. and i want to know if nokia pc suite come with it?
    tank for your help.Message Edited by mercurius on 27-Jun-2007 03:13 PM

    Hi salihou
    Modem driver is available with version 6.83 rel_14.1 of PC Suite or available seperately from:
    http://europe.nokia.com/A4162169
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Need help for nokia 6070

    Hello!
    I have had my nokia 6070 for several years, never been a problem with it, ecept i changed the screen once, but yesterday the main switch broke off its contacts:/ and the battery has flatted out, so even after i have charged it, i cant manage to start it. one of the pins on the switch has broken off entirly, so even after i soldered it on, there is no functuin:/ does anyone have the printcard diagram that shows how the power cercuit goes? so i can jump start it??
    the reason i do this much work for it, is because i have so many contacts on the phone!! i need to have them out somehow! if any one know other ways of extracting contacts without starting the phone(it has som cind of standby power when the charger is plugged in) please tell!!
    also intrested in where I can get a new switch for it. so i might get it to work again.
    best regards, nokia enthusiast Tistlo in norway.

    Unfortunately upon this manufacturer's sponsored forum discussion concerning disassembly of devices or posting of schematics is forbidden.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Issues with Ovi store in Nokia N8 and the OS is ha...

    Hi,
    I have taken Nokia N8 in the month of March. It was all working fine and all of sudden I am noticing that the Ovi store is not opening tried resetting to factory settings, It did not help. Tried reinstalling the Ovi It also did not help. I went to Nokia Care and they said that they need to upgrade the software, They did but after that also the Ovi store is not opening they were also not able to install the ovi. they said that they need to check and if they cant then they need to send it to Delhi, I asked them for a Back up phone but they say that they cant give. what is this we take a Branded mobile paying such huge amount and when we have to give it service they say it will take a week to 10 days and for a time untill they confirm when they would give the mobile they cant provide a back up phone. Its really bad on Nokia. Its damaging the reputation of Nokia. Can this be looked into. Well I went to nokia care expecting a good hospitality but I felt like I went an Open market where if you want leave it else please keep moving....

    Hi smartboy4u,
    You may try to check this link for further resolutions:
    http://discussions.europe.nokia.com/t5/Ovi-com-Ovi-Store-Ovi-Share-and/Ovi-Store-Problems-After-Upda...

  • Nokia 5030 and GSM 850/1900

    Hi,
    My brother bought a Nokia 5030 phone for his trip to the USA, on the Nokia website at http://europe.nokia.com/find-products/devices/nokia-5030/specifications Nokia 5030 according to specifications it support the following frequencies: EGSM 900/1800
    GSM 850/1900 
    The phone worked fine on the EGSM 900/1800 Frequency. 
    Before buying we checked with Nokia support and they told him that the phone should work in the USA. Now he is there and his Nokia 5030 couldn't detect any operator either by auto or manual search, he tried putting his SIM card in another phone and it detected a network, so its not the SIM.
    I have tried contacting Nokia support in my country, and they still told me that the phone should work in the USA.
    They told to try and perform a factory reset, but it didn't help.
    Also the box says "made in Romania" and it has only EGSM 900/1800 written on it.
    Also in the manual there is in mention of GSM 850/1900 frequency.
    (http://nds1.nokia.com/phones/files/guides/Nokia_5030_UG_en.pdf)
    My brother had to buy another phone (a Nokia) to communicate with me.
    Is there something wrong with that particular Nokia 5030 phone,
    or it does not support GSM 850/1900 frequencies,
    in that case why Nokia support tells me that it should work and the Nokia website lists that frequency in the specifications.
    Thanks.
    Message Edited by sergy1 on 01-Oct-2009 09:04 AM

    Hi,
    I see I’m not the only one that encountered that issue.
    I think that unless you have a manual or box that says that the device supports GSM 850/1900 frequencies, it will unfortunately not work and I think that software update won’t solve it as it appears to be a hardware issue.
    Its looks like that they’ve listed this phone as a quadband in their internal documentation so that the tech support and sales thinks that this phone is a quadband while its not.
    (I called twice before buying and spoke with two different customer service representatives that assured me that the phone supports the US frequencies, and that it must have been a mistake that the manual does not list it as such.)
    I hope that Nokia will notice and finally update the Nokia 5030 online specifications page, so that it would explicitly state that Nokia 5030 is not a quadband phone, like they did with their other phones.
    Here is a little update:
    After escalating my support request, and speaking to the customer support manager (and repeatedly asking for them to verify it with global Nokia), Nokia Israel (It’s actually represented in Israel by a company called Eurocom) acknowledged my request to return the phone for a full refund to the retailer, and offered me a small compensation (which I guess is better that no compensation at all).
    Today I should return it to the retailer, and I hope there won’t be additional problems with that.
    One thing I liked about the phone, (I guess this feature is available on most new Nokia’s phones) is its alarm clock feature that pronounces the current time as it tells you to wake up…
    One more thing,
    Notice the fine print that appears on the nokia 5030 specs page:
    “The availability of particular products, services and features may vary by region. Please check with the Nokia dealer nearest you. These specifications are subject to change without notice”
    I hope that you will be able to solve the problem like I did.

  • Nokia Map and Drive+ Beta on Lumina 920 Feedback

    So I took my new phone down to MD/DC area in the last few days and here are a few things that I would like to post as my feedback on what would be nice to have, fixes, etc.  [I used both my new Lumia 920 and my wife's Samsung Galaxy Note 2 as comparsion).
    1. Highest priority for me is that the routes from Here.net need to be able to sync down to the phone.  Nothing more is more important then this because when you have a custom route that you want to use (for example, to route around high traffic or potential high traffic areas).
    2. Extremely disappointed that a new road in MD (MD 200) was not used by the Drive+ and didn't even show up on the map on my Lumia 920 while it was used and did show up on Google map.  This road is a toll road and is over a year old already.  [And yes, I have enabled toll road in the navigation as well as selected 'faster route' as the routing to use under smart routing].  I cannot stressed how disappointed I am to not see Nokia Map have this route at all.
    3. Allow route changes on the Nokia Drive+ app.  As good as pre-planned trip and using Here.net, there are just tmes that it's much better to allow us to change the route based on latest condition.
    4. Never once did I see ANY traffic updates at all on both the Map and Drive+ Beta.  When it does shows on my wife's Google's Map/Navigation.
    5. I love that under Drive+, it tells you which lane to get into ahead of when you need to make a turn or merge onto another way. However, the flip side of that is that there's no way to know which road you're currently on.  This is probably more important for when you're in an area with a lot of highway/local way intersections.  Also, it would be great if it also will display the next major 'road' that you will be getting onto.
    So far I'm happy with some of the functionality and disappointed in some of Nokia Map and Drive+ and I have about a week left to decide to either stay with WP9 and Nokia or do I want to switch back to Android and Google Map.

    hi there,
    As this is a user to user forum only, if you wish to leave feedback with Nokia regarding their products and services, you can do so directly by clicking the Nokia Support link at the bottom of this page.

  • Nokia 6205 and PC Suite

    I can get my phone to connect and be recognized by PC Suite but, it will not authenticate. Does anyone know if there is a solution for this? I contacted Nokia tech support and they said my service provider (Verizon) was not allowing this functonality. However, PC Suite worked fine on my previous Verizon Nokia phone and when I contacted Verizon - they said there was no reason it should not work. Verizon has not done anything to limit such functionality in the phone.

    Have you tried another USB port in your PC ?
    or
    PC - desktop - my computer -right click with mouse - manage - device managre - see how th ephone is visible in list. If question marks etc. highlight- right click- uninstall
    Boot PC and try again.
    You should have the USB mode question popiing up in phone screen everytime you connect. Select dafault

Maybe you are looking for