NOKIA 6070 MODEM DRIVER

Hi!
I need to download nokia 6070 modem driver. and i want to know if nokia pc suite come with it?
tank for your help.Message Edited by mercurius on 27-Jun-2007 03:13 PM

Hi salihou
Modem driver is available with version 6.83 rel_14.1 of PC Suite or available seperately from:
http://europe.nokia.com/A4162169
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Nokia 6020 modem driver for vista

have installed pc suite 6.83 but it stills cannot connect to phone via usb cable as it shows no modem driver
found is there a separate driver for the 6020
regards
mat

04-Jul-200706:23 PM
devtron wrote:
have installed pc suite 6.83 but it stills cannot connect to phone via usb cable as it shows no modem driver
found is there a separate driver for the 6020
regards
mat
Nokia 6020 Modem is not find My Computer?
Phone Problem are Computer Problem?
I am go for Control Panal and select modem option but he is not fount the 6020 modem and donlode the *.inf file and add the modem but he is not respons
my Computer Status
Proceser : 2.66
Ram : 512MB
Opreting softwere Windows Xp-2
Nokia PC Suite 6.80 softwere
Cable DKU - 5
why i am not find the modem
Please Rply to me very soon
and send the Phone setting also

Nokia 6020 Modem Driver Download

I dowloaded the modem driver for 6020 as directed at http://www.nokia.ie/A4144316 but the file downloaded seems to be an information file - opens in Notepad. Is this a modem driver? File given for download is : Cable Modem driver for Windows 98SE,ME, 2000 and XP Users Download now Nokia6020Cable_98SE_ME_2000_XP.inf 28-Jan-05 | 6.00 KB | English

this .inf file you dowloaded is not meant to be installed directly but all you have to is to select that file when you are insalling the modem ..go to control pane>phone& modems>modem tab then add new modem then check the option "do not detect my modem let me choose from a list " from this click "have disk" then browse to the loaction of the (Nokia6020Cable_98SE_ME_2000_XP.inf ) that modem driver you have downloaded ...this is the only way to install the file ..configure the rest

Nokia 2626 modem driver

Plz tell me to download modem(Driver) for nokia 2626 so that I can use internet on my computer

There isn't a modem driver because the 2626 cannot be used as a modem.
You need a more advanced model for that feature.

Unable to connect to NOKIA 6070

I have bought a USB cable for the NOKIA 6070. I connected phone with computer and can access contents of the phone. It works so slow and USB device recognized as Serial device?
What is that compatible mode?? When I connect phone to the PC I didn’t get any message in phone…
NOKIA 6070 modem also not working…. Or not installed…????

Hai.. friend
Buy cable DKU_5 to your nokia 6070,first you must instal pc_suite and than conect to phone,I Think it work(can acces tranfer file and message.
For Modem you can chouse Standard 33600 bps Modem and go to internet.
Don't acces internet from pc_suite it doen't work for nokia 6070.

Nokia 5233 cable modem driver file

Hi guys. Can anyone give me the link to nokia 5233 cable modem driver file (.inf) I just need to use the modem functionality hence no pc suite or ovi suite. Please

Hi harshpranami,
Drivers for cables can be found here, just choose the relevant cable that you use to connect your Nokia 5233 to your PC.
Hope this helps and let us know how it works out.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Nokia 1506 CDMA modem driver

Does anybody know where to find Nokia 1506 CDMA modem driver? I tried to use the pc suite for 1506 but it seems not working...
have tried to use Nokia 1508 CDMA modem driver, but apparently the two devices' hardware ID are not the same... so the modem driver is incompatible.
I don't intend to use Nokia PC Suite functions.. i just need the modem driver...
thanks... your help is very much appreciated.

any solutions..? anybody..? Nokia....?
btw, the hardware id is USB\VID_0421&PID_0327\

Nokia 5800XM Bluetooth Modem Driver Standard Seria...

Nokia 5800 Xpress Music v31.0.0.8
The Nokia 5800 Bluetooth Modem Driver
and the
Standard Serial over Bluetooth link (e.g. COM Port over serial usbser.sys)
Doesn't install Properly on Windows 7 x64 Bit Edition.
Ive testet anything cleaning with the 7.1.1 Cleaner from nokia reinstall of
PC Suite
C:\Program Files (x86)\Nokia\Nokia PC Suite 7
and
PC Connectivity Cable Driver
C:\Program Files (x86)\Nokia\Connectivity Cable Driver
and
PC Connectivity Solution
C:\Program Files (x86)\PC Connectivity Solution
2x CDC Comms Interface also doesnt find a Driver.
On a second PC with ASUS maximus formula Mainboard Windows7 x64 Bit Edition Final
and AVM BlueFritzUSB Stick same Version one of these two sticks it works installed with the BtModem Driver why i don't know.
I dont know what the Faliure ist but the Bluetooth Modem for the 5800 and the Serial COM Port doesnt Install.
so Far i searched the registry on the working computer to locate the Inf File that are need also a manual linking to the corresponding INF File doesnt work.
ive also used
C:\Program Files (x86)\Nokia\Nokia PC Suite 7\Inf\nokbtmdm.inf
C:\Windows\inf\mdmbtmdm.inf
C:\Windows\inf\oem43.inf
; Nokia Bluetooth modem for Windows XP Home, XP Pro, XP X64
; Copyright (c) 2007-2009 Nokia 7.1.0.3 01-June-2009
[Version]
Signature = "$Windows NT$"
Class = Modem
ClassGUID = {4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider = %Nokia%
DriverVer = 06/01/2009,7.01.0.3
CatalogFile = nokbtmdm.cat
; Modem settings for Nokia5800XpressMusic
[Nokia5800XpressMusicModem.NT]
include=mdmbtmdm.inf
needs=mdmbtmdm.BTHMODEM.CopyFiles
AddReg=All, GenericAddReg, EXTERNAL
[Nokia5800XpressMusicModem.NT.Services]
include=mdmbtmdm.inf
needs=mdmbtmdm.BTHMODEM.AddService
[Nokia5800XpressMusicModem.NT.HW]
include=mdmbtmdm.inf
needs=mdmbtmdm.BTHMODEM.LowerFilterAddReg
Nokia5800 = "Nokia 5800 Bluetooth Modem"
So if the Modem doesnt install the Standard Serial over Bluetooth link for the COM port redirection also doesnt install.
C:\Windows\inf\bthspp.inf
Provider=%MSFT%
DriverVer=06/21/2006,6.1.7600.16385
Standard_serial = "Standard Serial over Bluetooth link"
I cant use Currently Applications that are Communicating from the PC over the needed Serial COM Port>Bluetooth with the Phone so it doesnt works without this Modem Connection ?
I hope someone can help me ive compared the Registry Entries on the Working Computer but i found i got no clue what i have do do. Ive found only the entries to the INF Files which i also want to use for Install but not acceptet.
Message Edited by janlehmann123 on 03-Oct-2009 02:05 PM
Message Edited by janlehmann123 on 03-Oct-2009 02:06 PM
Message Edited by janlehmann123 on 03-Oct-2009 02:09 PM

same problem here bro... I ran out of internet how much I searched... I tried even to change the operating system from vista to XP... same problem. What is weired it's that on my girlfriend laptop it works proper.

Problems with Nokia 6070 and CA-42 cable

Hi I have Nokia 6070, CA-42 cable, downloaded newest Nokia PC Suite (6.82), but I still have problems with connection. When I plug cable into the phone, it say : Data enhancement connected, and then Enhancement not supported. I properly installed Nokia PC Suite, but I still don´t have connection, because PC can´t recognise my phone. I tried many advices written here on discussion, like repairing cable drivers, re-installing PC Suite, restarting PC, but nothing works. Could you give me advice ?. Further informations in attached screenshot. http://img250.imageshack.us/img250/1193/nokia3in.jpg regards Viliam Tomaníček, Slovakia

12th Jan, 2010
Ok guys let's see if this helps... the problem is NOT Nokia PC Suite, the USB to Nokia Enhancement connector ie; the CA-42 data cable, your cell phone or your computer.
It's in your computer' settings... The answer to this problem with this particular cable is actually in the Nokia PC Suite "Help". It's under "Configuring connection types" They refer to it by name.
Unfortunately, (1) you kinda have to stumble into it... thank goodness I did and,   (2) you kinda have to be a bit of a computer geek to understand what they are trying to say...
The point is that they are basically tricking the computer to "see" the USB cable as a 9 or 25 pin serial DIN cable connection that would normally go into the COM1 or COM2 ports, which are still on the back of some PCs, but not available on modern laptops anymore.
My PC is Windows XP Service Pack 3. I will describe what I had to do to get the cable to work. Vista and Windows 7 users… just follow the principle.
You need to (1) configure Nokia PC Suite as well as (2) your PC/Laptop (in Control Panel) to "see" the USB connection as - COM3... here's how I did it for my PC.
Step - 1: Install the CA-42 Cable Drivers first using the install CD that was provided with the cable using "Found New Hardware" remember this is the XP experience...
Some preamble - I thought that installing the Nokia PC Suite does all the cable driver bits as well, but it looks like you actually have to install the cable drivers (Note – cable drivers first) and then the Nokia PC Suite app software separately. I got a “file not found error - ser2pl.sys” installing Nokia PC Suite. You don’t get that when you let the “Found New Hardware” wizard install it from the install CD. Don't restart your computer until the end of this rather lengthy two-step process... just click "Restart later"... I'll tell you when to restart...
START POINT (Still Step 1) - Ok, so now we are starting....
Shut down your system...
Plug in the CA-42 USB cable into a USB port. Important here… if you have a PC, decide on which USB port you are going to use ie; front or back USB ports. If you successfully install the cable drivers on one USB port, you cannot go taking out the USB cable and sticking it into another USB port on the same computer. You will lose the cable driver install completely. However if you plug the USB cable back into the original USB port used to install the cable driver software, it will re-appear in “Device Manager”. Maybe it does the same with laptops as well, I do not know..
Turn on your system... do not connect your phone to the CA-42 cable yet.
On restarting, Windows will find new device (CA-42 USB to Serial), try to install it automatically and come back and say... it was not installed properly (probably because of COM port conflicts)... let that finish, close it off and ....
While that was happening a "Found New Hardware" wizard will appear...let it happen.. do not close this.. let it sit and wait, we want to use this.... it is going to ask for the install CD, but guess what... when you insert the install CD (at least, if it's the same as the on I got) it’s going to kick off yet another install process.
Put the supplier's install CD in your player, that is going to kick off the CD's automatic install (autorun.inf), cancel it off.. do not run the automatic CD's install, it will not work !. Continue with Found New Hardware and let Windows find the CA-42 cable drivers on the install CD (from your drive D: or whatever) and install… do not restart your computer yet.
At the end of this, if you check Settings - Control Panel - System - Hardware - Device Manager - Ports (COM & LPT), you should see an entry for - "CA-42 USB (COM something). That COM something will probably be COM1 or COM2. Highlight this and right click.. go Properties, Port Settings, Advanced – In XP, there is a box to select “COM Port No.” Set this to COM3. The driver should say that the “device is working properly”. Click Apply, OK and exit Control Panel…. Do not restart yet..
So now we have XP set… let’s set the app…. Nokia PC Suite
STEP 2 – Setting Nokia PC Suite.
Some preamble - In July 2009, I bought version 6.4.8 of Nokia PC Suite with the CA-42 cable. I installed it and I was unable to get the cell phone to see “Nokia PC Suite”. After much trial and error, I flung it aside.
Well this past weekend , I decided to have another go at it.
I uninstalled it and downloaded and installed a more recent version from Nokia’s support site… version 7.1.40.1 … cell phone still giving “Enhancement not supported” message. Could not believe that I was that unlucky…
Again after much trial and error, I got it to work – a classic case of the simplest thing being so darn difficult…. So here goes..
Download the latest version of “Nokia PC Suite”, if the version you get is the one I got (7.1.40.1), , then you need to -
Do not connect the CA-42 cable to your phone yet. It should be connected to your computer on the USB end in it’s original install USB port !!
Start up Nokia PC Suite - Go Settings, Manage Connections
Tick off only “Serial Cable (CA-42), this should be in the list assuming you installed it correctly in Step 1
Highlight it and the little spanner (Configure) at the bottom should now be enabled
Click on Configure.. the little spanner
If it is saying “COM1” click on the little down arrow to the right. COM3 should come up in the list
Click on COM3… stop right here, do nothing
NOW…. you plug in the Enhancement end of the cable into your phone. If it still gives the “Enhancement not Supported” error, don’t panic. Make sure the cable is into the phone nice and secure. By the way, this cable tends to get “Disconnected” with the slightest movement of my almost 4yr old Nokia 6101. Make sure you are not using the phone and the phone is in standby mode. The phone MUST NOT be in “Contacts” or some other menu available in the phone otherwise it will not connect to Nokia PC Suite… STANDBY MODE please… I am sure I frustrated myself unintentionally by not paying attention to this detail.
Right, NOW you click on OK (the green check mark) … assuming everything else was done properly, after about 10 seconds, the model no. of your phone should appear in Nokia PC Suite. If you get this, you are going to have a blast with this software.
So cool – using my PC….. I have since been able to delete off a lot of junk (from inbox, outbox, images etc) and free up valuable memory, amend Contacts info, do a full backup of my phone onto my PC, load in a truncated MP3 file of Doobie Brothers, "China Grove" as my ringtone (...made it myself with a free MP3 editor - 1st 30 seconds – 433Kb… yeah huge… but worth it) etc…
Still getting the hang of this software…. The only digital camera I have is the one on my phone, so now that I can take pics and get them into my PC so easily, I am going to have a lot of fun with this software as well as with other aspects of it that I am not aware of yet.. I still have to install some kind of “Modem” drivers from the CD, and there is something about upgrading your phone software…..
It has only been three days since I got it to work but, folks.. This Nokia PC Suite is outraaaaaageous. !!!!!!!!
Oh I forgot…. Now you can restart your computer.
PS.. Whenever I restart/shutdown my system, I have to go and do the COM1 to COM3 part again in Nokia PC Suite when I turn it back on. I have not found a way to save the setting. Will try to attach a pic (yep…. taken with my phone, and downloaded into my PC !!!) of the CA-42 cable and CD that I got.
Hope this helps..
The "Add Attachments" button below is not giving me any feedback.... some help please ?

Nokia Connectivity Cable driver problem (Nokia 311...

I have an unlocked Nokia 3110 Classic with 2 GB MicroSD Nokia MU-37 memory card. On my PC operating system is Windows XP Service Pack 3. For connection with PC I use an original Nokia DKE-2 USB 2.0 data cable. My problem is when I install any version (from 6.5 to the latest 7.0) of Nokia PC Suite with Nokia Connectivity Cable driver or separatly this driver first and then Nokia PC Suite I got a problem under Device Manager with two devices that have yellow exclamation (saying: The drivers for this device are not installed.(Code 28).To reinstall the drivers for this device, click Reinstall Driver). They are under Modems: Nokia 3110 Classic USB modem, and under Ports (COM & LPT): Unknown device. This unknown device and also Nokia 3110 Classic USB modem (with yellow !) is present when I connect my phone and PC with USB cable and when I choose Standard Nokia mode. I tried to solve this problem on many ways (unsuccesful) following NOKIA instalation instructions and troubleshooter. When I try to install (or reinstall) a driver for this two problematic devices with Hardware Update Wizard choosing Windows Update or any other way (automatic - recommended or another) at the end I got this message: 1. Windows can't install modem with two answers: YES or NO, if I click YES, there is a new message: A service installation section in this INF is invalid. If I click NO at the first message the window of Hardware Update Wizard is just closed with no other messages !
So please if anyone here knows (or had this problem before and solve it) how to solve this problem, help me, because I am desperate.
I'll be grateful for any help !
Message Edited by ratnik_pakla on 29-Sep-2008 11:17 PM
Message Edited by ratnik_pakla on 29-Sep-2008 11:23 PM

In this attachments are pictures (screenshots) of my problems (in .bmp format): screenshot of Device Manager on my PC, Unknown device in Device Manager,Nokia 3110 Classic USB Modem in Device Manager and Windows XP Professional SP3.
You'll see that I use on my Windows XP Professional Service Pack 3 some Vista themes. So, don't think that this is some "fake Service Pack 3", this is the real Microsoft Windows XP Service Pack 3 (last and official, not release candidate) downloaded from Microsoft Web site, but I use some Vista Customization Desktop Tools or something like that, I don't know exactly the name of this program, but that program install Vista themes that I like.
P.S. This attachments are pictures in .bmp format but I added a .txt extension because this forum only except files with .log, .txt, .bat, and .xml extensions, so if you are going to save and open it on your PC please remove .txt extension. If not, just click on it.
Message Edited by ratnik_pakla on 30-Sep-2008 03:10 AM
Message Edited by ratnik_pakla on 30-Sep-2008 03:13 AM
Attachments:
USB modem.bmp.txt ‏538 KB
Unknown device.bmp.txt ‏538 KB
Device Manager.bmp.txt ‏846 KB
sp3.bmp.txt ‏108 KB

E70: cannot load IR modem driver

I upgraded the FW to the latest version, I have the latest PC Suite installed and still I cannotuse the E70 with my laptop for dialup GPSR connections. It seems PC suite does not automaticly install the correct drivers for IR modems. I now use the standard one, but I get the message 'cannot connect to the network'. If I go to the option, I only can pick the 'standard modem over IR link'.
On the Nokia site there's a special IR-driver ( an inf.file) for the E70. I downloaded this but it will not install. Even if I try all the basic windows setup install procedures this file is refused. It is seen OK if I go the the option where you select your own drivers, only it will not install. A totally mysterious thing. Is the file corrupt? Is something wrong with my W2K-version.
I remember I had this thing before with other drivers, but one way or the other I always managed to get around this. Now I can't find a solution. Trouble is I cannot use the E70 to connect my PC to the web while I'm traveling.
Anyone with a brilliant solution??
(PS. I don't want to use a cable and I don't want to use bluetooth. I want to get the IR-link working on the E70.)Message Edited by rusco on 25-Oct-2006
05:22 PM
Owner Nokia 520 (experiment: serious problems connecting pop accounts).
History: Siemens S4, Sony Z1, Ericsson SH888, Siemens s40, Nokia 6230, Nokia E70. Nokia E71-1, E72-1, HTC Wildfire (good stuff), HTC One V (also nice).
(And sometimes I still miss my Psion Revo! ;-)

Took a while, but I tried the USB cable and with this connection I have no problem making contact with T-mobile.
So I still don't understand. How can I actually change the standard IR-modem driver thatis included in the Nokia Suite with the special E70 modem driver that I already downloaded? I hope some Nokia E70-W2K specialist has a good tip!Message Edited by rusco on 22-Nov-2006
06:15 PM
Owner Nokia 520 (experiment: serious problems connecting pop accounts).
History: Siemens S4, Sony Z1, Ericsson SH888, Siemens s40, Nokia 6230, Nokia E70. Nokia E71-1, E72-1, HTC Wildfire (good stuff), HTC One V (also nice).
(And sometimes I still miss my Psion Revo! ;-)

Nokia 6070 and pcsuite

hi i wanted to connect my new 6070 to a pc using the nokia pc suite, without any luck.. i both tried the localized, hungarian version, and (after uninstalling the previous) the european (english) (v6.81.13), but non of them worked. i would like to use IR connection, and it seems to be working, as windows recognizes my phone, and if i let it connect to the net, it even downloads a (non-signed) driver for nokia 6070 (the pc suite gave the same error before and after installing the windows driver) the pc suite scans for the phone for a long time, then gives the error shown on this picture. if you have any ideas, please let me know thanks adam

Hi radarbailey,
Seeing as the phone has got wet this could be a varierty of problems here.
Try a different battery, i have seen a couple of times where a water damaged battery puts the phone into these modes.
Although the above is unlikely it might offer a quick and cheap result.
If that does not work, you can be fairly confident that the phone is not worth getting fixed as the cost of repairing that handset would out weigh the cost of the handset.
Message Edited by adamf on 10-Sep-2008 02:20 PM
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Nokia 6020 modem

How to use Nokia 6020 Phone as a modem?

04-Jul-200706:23 PM
devtron wrote:
have installed pc suite 6.83 but it stills cannot connect to phone via usb cable as it shows no modem driver
found is there a separate driver for the 6020
regards
mat
Nokia 6020 Modem is not find My Computer?
Phone Problem are Computer Problem?
I am go for Control Panal and select modem option but he is not fount the 6020 modem and donlode the *.inf file and add the modem but he is not respons
my Computer Status
Proceser : 2.66
Ram : 512MB
Opreting softwere Windows Xp-2
Nokia PC Suite 6.80 softwere
Cable DKU - 5
why i am not find the modem
Please Rply to me very soon
and send the Phone setting also

Nokia 6233, BT driver

Have problem installing the bluetooth modem driver. 1. No required driver in PC suite. Neither on CD or from nokia web (6.81). 2. The driver downloaded from www.nokia.com does not have digital signature and windws XP SP2 block instalation. Waiting for your proposition.

Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (United Kingdom)
Input language: English (United States)
Nokia PC Suite:
Version 6.81.13.0
Language: English
Connectivity Cable Drivers:
Version 6.81.1.2
Microsoft Outlook:
Version 10.0
Build 6626
Bluetooth stacks:
Microsoft Bluetooth stack
Version 5.1.2600.2180
WIDCOMM Bluetooth stack
Version 4.0.1
Build 600

[qtek 2020] Phone modem driver

I'm aware of problems in synchronizing Pocket PC PDA and Ibook, but I have to resolve my problem. I can "see" my PDA through bluetooth connection just for synchronize contacts and mail - can't see wireless modem. How can i do? Is there a MAC bluetooth modem driver for my qtek? Using Win XP, driver's name is HTC USB Modem, but i couldn't find the same for Mac OS. Can you help me? It would be important for my job.
Thanks in advance.
m.

I have paired Qtek and Ibook many times, but never have been asked about Internet connection, simply because Ibook sees the PDA as "computer", not as "phone". In Bluetooth service, i just can find: Service Discovery, Voice Gateway, SSA. In Nokia Bluetooth service i can find: OBEX Object Push, OBEX File Transfer, Dial-up networking, Nokia PC Suite, COM 1, Voice Gateway, Audio Gateway, Client SYNCML, SIM ACCESS.
Using a PC, i could easily find the way to log on internet and use BT modem. Since i have to use ZTerm software (like an Hyper Terminal for Win platform), i have to "see" my BT modem...
m.

NOKIA 6070 MODEM DRIVER

Similar Messages

Maybe you are looking for