Nokia 6085 Blank Display screen now after start up...

Phone is two months old. Worked fine. Now all of a sudden, for no apparent reason,
the display screen, is lit up, but, blank. Can't get Nokia greeting, nothing. Can call out,
can receive calls, but, can't view screen. Removed battery, for whole night, put back in. Sim card is
fine...still...blank screen.
Need help...any suggestions., or is the phone just useless now?
Thanks in advance to anyone for your time.
Very disappointed.

w0nderw0man, the 3-finger reset will not work for S40 phones like yours. It's only for Symbian phones like the N-series, E-series, 5800, etc.
If there's a blank screen, it's best taken care of by a Nokia Care Point.
I would suggest that you get a new phone instead of repairing the 6085, because the repair costs in most cases as much as a new phone of similar or better features. Just my two cents.
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Similar Messages

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Try to reset the PRAM first then go from there.
http://support.apple.com/kb/HT1379

Mac Pro display remains black after start up.

My 2008 Mac Pro display remains black after start up. It is plugged in properly and the light comes on, but the screen stays black. It first started doing this about a week ago, but after a manual restart or two, it would start up properly with the display working. Today the display has remained black every time I've tried to start up. Any suggestions for troubleshooting would be greatly appreciated! Thanks!

Safe Mode uses a very simple way of talking to the screen -- it does not even load the screen driver, and it uses a very common low resolution.
If it does not work that way, it simply does not work. You need a replacement graphics card.
User Tip: Mac Pro silver tower (2006-2012) Replacement Graphics cards

And now after starting over 2 minutes it's stuck!

I used my Ibook 1 yaer. And now after starting over 2 minutes it's stuck! Servece company told me that the problem is in video card and it's need to replacing motherboard and it cost $800. This making useless my Ibook.
Maybe there is anothe way to help me?

Hello, and welcome to Apple Discussions.
Enough dual USB G3 iBooks suffered from this problem that Apple began the iBook Logic Board Repair Extension Program in January of 2004. Check out the FAQ page and if the symptoms look familiar, give Apple a call. If your iBook qualifies, it's a free fix.
If you are past the three-year time limit, try calling and asking for Customer Relations and ask them to please make an exception to the three-year limit in your case.
Good luck!

Cant access my #2 display screen right after i installed verson 10

For some reason i cant access my #2 display screen right after i installed verson 10.the cable was checked out ok....please advise.

, Hello and thanks for posting on the HP support forums. First thing you may want to try is the Windows Update Troubleshooter. If that fails then what you will want to try is rolling back the operating system to the previous operating system until drivers are released for Windows 10 on the HP support site for your system. Thanks again for the post and have a great day.

Why do I have a grey logon screen now after downloading Yosemite ?

Hi, sorry if this sounds daft but please could anyone tell me why I no longer have my regular login/start up screen when I turn my macbook pro on ? I used to get a small flower icon with my name underneath it that I just had to enter my password into, now, after installing Yosemite, I am presented with a grey/white screen with a torso silhouette and then my name underneath and then space to enter my password. If I enter my password it oddly starts a bar system loading with an apple icon above it, it then mostly goes to my desktop ( eventually ) but sometimes goes to the original logon screen where I have to enter my password again ???
I am not certain that Yosemite has installed correctly? if I click the apple logo and "about this mac" - it says I am running OS X Yosemite 10.10 but in my app store account, the download is not listing as done or even waiting to be done ?
Does anyone have any ideas please ?
Many thanks

Hello Armando
Check out the article below for troubleshooting your issue with the display. There are a few things that can be done, like changing the resolution of the display and also to reset the NVRAM to see if that resolves that for you.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
-Norm G.

Blank White Screen Appears after deploying the form on server

Hi Experts,
We have one strange issue with the interactive form developed.
One of our end user is seeing a Blank White Screen with Red cross at corner when he opens the form in portal.
The form Layout type is ZCI and Display type in Web Dynpro is Native. THe user has Adobe 9 version and working on Internet explorer 6.0.
Kindly let me know how to solve this problem.
Thanks & Regards,
Phani.

Hello,
this happens when the activeX component is not installed for ACF forms. You say you have ZCI so that should not be the issue. I would recommend to try to open other PDF forms on the internet or offline using this users browser. I would re-install the Reader (well, I would use 8.1, because I´ve heard 9 has problems sometimes). And maybe try to install that activeX component. And... now it reminds me of... check his browser security properties, maybe he is so "secure" that he cannot see the form.
Otto

1100 Blank green screen - won't start up

I have a nokia 1100. When I turn it on the screen just goes to a blank green screen with a faint flickering black box.
It remains like this until turned off. The only way to turn it off is to pull the battery out, since none of the buttons work.
anyone got any ideas?

Think the ONLY hope of revival is thru' Nokia Care ..that too somewhat doubtful for this very old device ...Try your luck ...

Display colors change after start up

Hi, I recently tried to open a Power Point file which was too heavy and I got so desperate that I hit the keyboards as if they were a piano... Final result is that now everytime I start up the computer the display colors are all a mess, like if the "negative" part of the picture shows up instead of the true colors. I know the display is ok, for when the computer is started, the initial screen colors show up well.
I would not like having to reload the operating system to fix the problem.
Any suggestions?

Open the Universal Access pane of System Preferences, click on the Seeing tab, turn off the White on Black option, move the Contrast slider all the way to the left, and deactivate the remaining options except for the one which controls access to assistive devices.
(23938)

Grey screen only after start up tone

Have a 2008 Mac Pro, when I start it up, I get the start up tone, then it just goes to a gray screen. A few times yesterday, the Apple logo would show up with the spinning wheel...even once got the "No Entry" sign. Is this a power supply issue or a drive issue or something else? Is there any way to get the info of the drives?

The chime is generated in software after millions of instructions have been executed. It indicates that if an appropriate Boot device can be found, booting is likely.
The gray screen can only occur after the software initializes the display.
The Gray Apple is loaded off a Boot device -- it is not present in the ROM code available at Startup.
In summary, you have progressed far beyond fundamental problems like power supplies. This article address the "No entry" sign:
Mac OS X: Gray screen appears during startup

20" display screen now has black border

My screen suddenly has about a 2" border of black on each side and a 1" black border on top and bottom. Toolbar, desktop picture, etc. all show up as normal. However, I am only able to use about 60% of the screen. In some apps such as Quicken, I can't reach the sizer because the bottom of checkbook register is now in the black part. May not even be a prob. w/the display, because altho the screen of the PC itself has no black border, the images in some apps are cropped as described above. I have tried changing display preferences and black border remains. Ideas/solutions will be v. much appreciated.

Sounds like you'll have to take it in to the Apple store for service. This happened to my wife's iPhone and they just replaced it.

Blank display screen Zen micro photo

Does anyone know what to do about a blank screen display on creative zen microphoto 8gb? The player it self works and can use it through the pc but apart from that it is pretty useless as cannot see anything to navigate through it.
Also is there a way to back up all the tracks etc from the MP3 to PC and/or DVD disc so i can transfer the tracks to a new player if need to without have to sit for hours ripping cds!
If anyone has had theres repaired roughly how much does it cost.

Link to service that repair Creative? players. http://www.aerozbooks.com/index.php?act=viewCat&catId=5

TS2634 iphone 4s display darkens immediately after starting. has been updated, reset, restored to factory settings, etc. problem remains

caption says it all. we have tried everything. the screen goes out moments after being turned on. there is plenty of battery, it connects to itunes without problem, we have reset, we have restored to faculty settings, we have restored content, firmware has been upgraded.

Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device. Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

HT201263 My ipad will not show the recovery mode, it goes into DFU mode just fine, but whenever I put it in recovery mode I get nothing but a blank white screen. After doing a restore or update itunes gives me error 37. This all happened due to a failed u

I updated from ios 5.0.1 to 5.1. Midway through the update itunes crashed. I got it all working again and ever since I have been stuck in a recovery loop. DFU mode works fine, but when I go into recovery mode (yes I am doing it right, yes I have tried pwning, tinyumbrella, etc.) it still just gives me a white screen (I am not getting the plug arrow and itunes icon screen that shows up when you are in recovery mode). I am a huge fan of hacking, mods, and jbs, BUT have never done any on the iPad, (found it pointless).. nevertheless, I am stuck thanks to apple in a white screen and a nonworking iPad. If anyone has any ideas that does not include jbs, updating, restoring, restoring with internet off, restoring in DFU, I would gladly appreciate it. I would take it to the apple store but it was a friends and I didn't purchase it. My friend had the issue formerly and they had no idea what to do at apple (they usually try DFU, restore, and then have nothing else to tell you.

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

XPERIA RAY BLANK DISPLAY AFTER ICS UPDATED

i upgrade xperia ray from GB to ICS, the phone after being locked does not come out of sleep but just shows a blank display screen and unable to access menus.
even when attending a call, the motion sensor detects the face and the phone display shuts off and continues to show a blank display screen for a long time, unable to access phone menus thereafter.
Is anyone facing similar issues.
Pls help!!!

repair it with SUS
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Nokia 6085 Blank Display screen now after start up...

Similar Messages

Maybe you are looking for