Nokia 6085 - My screen flashes every 5 seconds aft...

hi! i have updated my nokia 6085 from v5.03 to v6.00 and the screen flashes every 5 seconds.
can i get back to the previous version or do something to stop this?

Also wanted to add its a... 600-1005xt
Thanks

Similar Messages

  • Qosmio G50 - HDD light flashes every second

    Okay, So here it is,
    I have a Qosmio G50. I have installed WindowXP Pro 64-bit.
    I have noticed that the hard drive light flashes every second. I have spent a bit of time looking on the net for a soultion. This led me to download a utility called 'process explorer' from microsoft.
    This utility show me that the active process is services.exe. The properties of this service suggest that it handles 'eventlog' and 'plugplay'
    I realise that I cannot switch of the event log, nor would I want to.
    Can anyone help?
    Thanks in advance.

    Hi
    The HDD led flashes always if there any data would be read from or written on the HDD.
    The service.exe (Service Control Manager) belongs to the Windows OS and its Microsoft background process which is needed and from my knowledge it cannot be disabled.
    Bye

  • IPod doesn't turn on, doesn't respond, its screen flashes every ten seconds

    Hello. Yesterday, my iPod's battery was discharged. I charged it for about 10 minutes. After that, I listened to some music until the battery discharged again. I didn't connect the iPod again to my PC. Several hours later, I noticed something strange: the screen was, every ten seconds, giving a fast flash of light that only lasted like half a second. I tried every button (I checked that the iPod wasn't in Hold mode) but it didn't do anything and the flash of light continued. Then, I connected the iPod many times to the PC, each time in a different USB slot. Nothing happened. No message of recognition from the PC or from the iPod. It's like I didn't connect it. I tried in another PC, but the result was the same. I tried to reset it, but it didn't do anything. It simply doesn't work. Can you help me? Why does the screen of the iPod turns on and off for so little time every ten seconds without me doing anything for that to happen? Why doesn't the iPod work? Thanks

    I'm having this exact same problem, except that occasionally I'll get "please wait, very low battery."
    Otherwise, the Apple logo comes up and the screen brightens up, and at the same time I can HEAR the drive inside whirring up, but then it just quits... Only to try again!

  • Nokia 6085 Software to Flash erase

    Hi,
    I need the software to flash erase the Nokia 6085, which has got locked by the security code of the keypad lock. The security code doesn't accept any of the keys and hence is locked. I need to format it and re-install, i.e to flash erase the phone of its previous data.
    I'm in India, and the software for the phone is not available here in India. Can anyone help me out?

    As pyscho says, that is just not possible.
    You will need to visit a Care Point and get them to remove it.
    This will cost you money though as its not a warranty fault and more of a customer fault.
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

  • Erratic Magic Mouse (jumps accross screen precisely every second)

    The title sums it up really. Every second (on the second) the cursor will jump very slightly on the screen. Probably only about 2 or 3 millimeters. It's annoying, but it's not a huge deal.
    What IS a huge deal is when the mouse decides to jump the cursor to a random point on either of my two screens. Extremely annoying especially if the second screen isn't even turned on and it jumps over there.
    What I've noticed is that it seems to do it more frequently when there is a higher load on the system. With a 'normal' workload (internet browsing, skype, listening to music etc) it will do this big jump approximately every minute. But when there is a high load, like when I'm trying to play a game it will happen every couple of seconds, rendering most games totally unplayable! (The number of times my character has ran off the edge of a cliff because of this is maddening).
    Now here's the thing, I took my iMac and Magic Mouse to my local Apple Store and wouldn't you know it, nothing happened. It behaved itself perfectly. But they were very good and swapped my old Magic Mouse for a brand new one out of a retail package anyway. Happy, I bring it home and immediately it's doing it again exactly as before with the brand new mouse!
    My iMac is the 2010 27" Core i5 version upgraded with 12gb of ram, in case any of that is relevant at all.

    I don't believe this. I've just spotted this post by user Ratzelda. He says that it's an issue with having dual (or multiple) monitors connected but powered down. I hadn't noticed any change in the mouse's behaviour when using the second monitor, but out of curiosity I just switched it on and sure enough the mouse is behaving normally now!
    That explains why the mouse didn't respond erratically when I took the iMac to the Apple Store, because I didn't take my second display with me.
    It seems like this is a known issue, and yet no patch has been released by Apple to fix it? Having to continuously run both monitors when it's not needed seems very energy inefficient to me. What is Apple playing at?

  • I have noticed my iMac's screen flashes every so often.  Any ideas?, I have noticed my iMac's screen flashes every so often.  Any ideas?

    My iMac seems to be running just fine, but every so often my screen flashes.  I have not noted any regular intervals for when it happens nor have I tied it to an particular activity I am doing at the time.  Anyone else notice this happening?

    Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

  • FM2-A85XA-G43 issues, no USB boot, screen flashing every 30 sec.

    I've build an MSI project after a long hiatus. Been using the G-board but their QC seems to of gone down hill.
    The build:
    mobo    FM2-A85XA-G43  Bios 2.4
    These items Work fine, ran it in a giga mobo for a test.
    A6-5400K  cpu- 
    CORSAIR Vengeance 4GB 240-Pin DDR3 SDRAM DDR3
    Seasonic 550W
    Segate 1Tb  Tried two of them, seen in bios
    Problem is my win7 starter is on a usb and the mobo won't recognize any USB in bios or on the F11 menu. 'I've tested the usb.'
    As a possible work around I toss in an old XP install disk and it loaded till the ''starting windows'' and then it bsod with an A7 error.  I was getting that error just trying to load xp in ACHI so I switched to IDE. Everything is default   After a reboot xp continues till the ending reboot and then it bsod with an 0A error.  All this time the screen goes black for a second every 30 seconds or so.
    I'm at a loss and need ideas.  I've clear cmos lots of times.
    I need a dummies guide to that text interface that pops up on some boots. Nothing I've typed in is recognized. ?(startup.nsg)????

    Thanks, yep tried that too. Even different SATA ports.
    I did find out why my USB was not being recognized. The USB had actually physically broke and was being retracted upon insertion.  Nothing a little hotglue couldn't fix.
    So I'll clean the hhd of the partial xp install and try the Win7 starter again.
    I'm still expecting a bsod so I'll find a quality psu and see how it goes. I'm leaning more toward a psu issue because any change in dram settings and it boot cycles. I've run this ram solid at 1866 but anything off 1300 on this board and it dies. I'm running a $50 Frys 500W unit that runs all these parts on a Giga board fine but I've seen stranger things.   
    I'm not used to the thin and flexible mobo material used on this MSI unit. I may mount some non conductive material behind the 24 pin connector so I can make sure it's seated.

  • Screen flashes every 3 secs and the finder resets

    im on a late 2011 imac and the problem started when i was opening a dmg, before the dmg had finish the finder reset and i cant have acces to the folder with the file that i think is making all this flashing and reseting of the finder, i've even had tried to reset the size of the resolution of the screen and it just flashed and got back to the state it was when the problem started.

    I did a "Repair Disk permissions" and that stoped the flashing(there was no sound with the flashing) but i still can not enter to the Applications folder, where the half installed app is, i've even tryed with the
    rm -rf ./filename
    comand on the terminal and that does not do the trick, reading more i saw some post that said starting the machine in "safe mode" i get the screen with the loading bar but i still cant get to the applications folder. and thats the status right now, ty for the sugestion but i think i need more help!

  • Black screen flashing constantly recent upgrade to Yosemite

    I upgraded to Yosemite yesterday on my brand new macbook pro with retina display and this morning i had some issues with my fonts so as i was looking in the library folder to try and find the font problem all of a sudden my screen went black and then started flashing every second to the normal screen and back to black. Now i can't even log in with out it constantly flashing black - can anyone help as i've no idea what i've done to it or how to resolve the issue because i can't get onto it!

    I managed to solve mine by rebooting my mac in recovery mode (hold down cmd + R when you turn on) then reformatting and re-installing OX S Yosemite. Unfortunately it means loosing all your stuff but it's stopped the problem for me! Hope this helps.

  • Screen Flashing Problems HELP ME!!!!

    Hi, Im having problems with my machine.
    My screen animation stops and then when I click on anything, the screen flashes every few minutes for no real reason.
    I'm running
    MSI KT6 Delta (newest flash update)
    AMD Athlon XP 2000+
    1 x 512mb DDR333
    40 gig IBM deskstar Hdd
    and a new Inno3d Geforce 4 5900FX 128mb 256bit 8x agp vid card
    I have had the problem since I put my previous Inno3d Geforce 4 5900XT 128mb 256bit 8x agp vid card.
    I thought this was the problem but swaped it for my new one on a temp basis.
    Its still the same. I have latest nvidea drivers but it doesn't seem to make any difference at all.
    Can anyone help..
    please
    please, please, please

    Just some more system info. (hope theres enough)  
    Processor:          AMD Athlon(tm) XP 2000+ 1.7 GHz
        Math Support:       Present
        BIOS:               AMIINT - 10 Version 07.00T Version 1.00, 02/10/04
        Bus Type:           PCI, ISA, USB
        Ports:              1 Parallel, 3 Serial
        Memory:             kingston 1 x 512 MB  (26% Utilized) DDR333
        Memory Utilization: 26%
               Total Physical Memory: 512 MB (536870912 Bytes)
              Available Physical Memory: 321 MB (336707584 Bytes)
               Page File Capacity: 867 MB (908607488 Bytes)
               Available Page File capacity: 725 MB (760700928 Bytes)
        Floppy Disks:                        Sony 1.44 MB
        Hard Disks:                           Fujitsu 16.11 GB, and IBM deskstar 38.34 GB
        Multimedia:                           Sound, CD-ROM
        Video:                   800 x 600 in 64K Colors, NVIDIA GeForce FX 5900 Ver. 6.14
        Video Chipset:                       NVIDIA GeForce FX 5900 Ver. 6.14
                                                    Resolution: 800 x 600 in 64K Colors
        Monitor                      Samsung Syncmaster 750s (17")
        Cdrw/CD/DVD      Aopen 52x32x52 cdrw IDE (CRW5232)
        Modem         Conexant 56k pci v.90
        USB Items      Logitech USB wireless keyboard and mouse
             HP Deskjet 940c
             Sony Clie Usb cradle (not in use, but connected)
        OS         Windows:  XP Pro 5.1 (Build 2600)
        Running Software                   Nvidia Desktop manager 6.14
             MSN Messenger (not logged in)
             Norton Antivirus 2003 Pro (+latest updates)
             Roxio Easy Cd & DVD Creator 6

  • TS3274 My ipad screen is flashing about once every second when plugged in, it wont boot, no logo

    I have an ipad first generation. it wont turn on when press the power button. When i plug it into the wall, the screen blinks about once every second. It does not display any logo.
    it doesnt seem like i can reset it or put it into recovery mode.
    Any suggestions? do you think it has a hardware problem?

    Hello oilyragfun, I am having the exact same problem. Did you ever get this resolved?
    No history of drops or abuse. When I plug it in the screen just dimly flashes or pulses about once every second. No logo, just the entire screen dimly backlit for a half of a second the blank again. I can't get it to respond with any combination of buttons or reset proceadures.

  • Nokia 6085 Screen Malfunction

    The Screen on my Nokia 6085 has started to flash blue and then return to normal. It does this approximately ever 5 seconds. Does anyone know why this is occuring and how it can be stopped.
    Thank-you.

    04-Jul-2008 03:29 PM
    fariefaye wrote:
    Nokia discontinued the model btw, they say it's just because they developed a new model but really it's because they realized this model is defective...
    No. Not this time. It's still being rolled out of the factory. It seems some batches of this phone have this kind of fault.
    This tip below might be a little useful.
    Try updating your phone's firmware by clicking to this link below:
    http://europe.nokia.com/A4579163
    Make sure you meet the system requirements before proceeding and backup some of your important contents.
    If the phone still does not show any improvements, I suggest you to send the phone to the Nokia Care Centre near you.

  • When I turn on or restart my Macbook Pro Retina 15", my entire screen flashes completely bright yellow for a few seconds and then it goes to the normal Welcome screen.  How do I fix this??

    Hi Everyone,
    This problem just started today.  When I turn on or restart my Macbook Pro Retina 15" (Mid 2012 version), my screen is light gray like normal, and then after a few seconds my entire screen flashes completely bright yellow for a few seconds, and then it goes to the normal Welcome screen (where I choose to login as myself or a guest user).  This suddenly started today and has not stopped since.  This keeps happening every single time I turn on or restart my computer.
    Yesterday I installed all the Mavericks and other updates that were available in the App Store, so I'm wondering if this is related to that since this never happened prior to my doing those updates yesterday.  When I first installed the new OS X Mavericks (10.9.3) update, it went through the whole installation process (took about 10 minutes), and then during the installation I got an error message saying that it couldn't verify my iTunes application that was on my laptop, and then my laptop finished installing the updates.  Then once my laptop restarted, the App Store "Updates" section said that I had to do the whole OS X Mavericks (10.9.3) and iTunes (Version 11.2) updates all over again.  So my laptop did the whole installation again (took about 10 minutes, but this time I didn't get that "iTunes error message" during the installation process). 
    Now, when I go to the App Store "Updates" section, it says the following under "Updates Installed in the Last 30 days":
    -Digital Camera RAW Compatibility Update (Version 5.05) installed May 15, 2014
    -OS X Update (Version 10.9.3) installed May 15, 2014
    -iTunes (Version 11.2) installed May 15, 2014
    -OS X Update (Version 10.9.3) installed May 15, 2014
    -iTunes (Version 11.2) installed May 15, 2014
    -Security Update 2014-002 (Version 1.0) installed April 22, 2014
    I'm wondering if this flashing bright yellow screen upon bootup is related to the fact that my laptop installed the OS X Update and the iTunes Update two times each?  Or is this new problem totally unrelated?  It's just that this problem started a day after these 2 updates were installed twice.
    My Macbook Pro Retina 15" (Mid 2012 version) is otherwise working fine at least as of now.  The only issue so far is this flashing bright yellow screen every time I turn on or restart my computer.
    If anyone could please help me fix this so that my bootup screen doesn't flash completely bright yellow anymore, I would be forever grateful! 
    Thank you so much for reading this and for any help you can provide. 
    hope everyone is well,
    Elaine

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • Screen flashing/black screen for 1-2 seconds - 7850 power edition 2gb/OC

    I recently bought the MSI R7850 Power Edition 2GD5/OC. I have installed amd catalyst 12.10. I have no issues while playing games...the only game i have played since i bought the card is prototype 2 (all settings set to high). The problem is while browsing or when not playing my screen flashes (just once - screen becomes black) for about 1-2 seconds. This does not happen regularly, but quite a few times.. i have uninstalled and re-installed the same catalyst version twice (downloaded from different sources - one from msi and the other from amd). The problem still persists.
    Board: ASUS P8-H67-M PRO
    VGA:   MSI R7850 Power Edition 2GB DDR5/OC
    PSU:   Cooler Master GX550 550W (44a 12v rail)
    Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W
    MEM: Corsair 1333 8gb (2x4gb)
    HDD: Seagate 500 GB 7200 rpm
    Thanks.
    OS: Windows 7 64bit ultimate.

    I've experienced the same issue exactly as described, with the R7850 Twin Frozr OC Edition. However, I've also experienced a crash or 2 in which the screen goes black and the monitor goes to sleep. The computer doesn't wake up and I'm forced to do a hard reset. One such event was severe enough that I was unable to restore Windows 8 and had to do a full reinstall...!)
    Everything is clocked at factory default, passes Memtest 86+, Prime95 overnight run, even FurMark successfully...
    Board: ASUS P8Z77-M
    Bios:   American Megatrends Inc., v1708
    VGA:   MSI R7850 Twin Frozr III 2GD5/OC
    PSU:   Seasonic X-750 (+12V@62A)
    CPU:   Intel Core i5-3750K
    MEM:   Samsung DDR3 PC1600 8GB (2x4GB)
    HDD:   WD 500 GB 7200rpm
    COOLER: GPU: Stock. CPU: Xigmatek SD1283 Gaia w/Scythe 120mm Slipstream PWM
    Sound card: Creative SoundBlaster X-Fi XtremeGamer
    OC:     No overclocking, factory default.
    OS:     Windows 8 Pro, 64-bit
    When I tried to save the GPU-Z BIOS settings to a file, my computer crashed my computer (!)... Hopefully this is sufficient to indicate if I should follow the same steps or if this is a different issue / hardware issue / ???
    TechPowerUp GPU-Z 0.6.7
    Driver Version: atiumdag 9.2.0.0 (Catalyst 12.10) / Win8 64
    BIOS Version: 015.017.000.000.000861 (113-C4030400-100)
    edit:
    S/N: 602-V273-010B1210251006
    Also updated format of table above
    (Perhaps worth noting that the box didn't include any driver CD for some reason)
    Thanks for the help.
    -DH

  • My Nokia SuperNova 7510 is flashing a white screen...

    Yesterday, my phone ran out of battery so I plugged it onto the charger and left it that way overnight like I normally do. When I tried to turn it on in the morning, a white screen flashed on the screen and it kept going from a black screen to white about 5 times and then shut off again. It keeps doing this, I've tried taking out the battery and SIM card and waiting for a while and nothing has happened. I've also tried the deep reset thing where you hold down the 3, green key, and * and the flashing still happens when I press the key to turn it on. Please help.

    if you have done reset etc and the problem remains you need to take it to a nokia care centre im afraid you can try updating the firmware 1st though if nothing changes nokia care centre is your last resort
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

Maybe you are looking for

  • Gvfs-mtp doesn't work

    Hi guys, I'm getting mad cause I can't have two android devices working properly. My devices are: * Sony Xperia Sola (MT27i) phone: recognized in Nautilus but the folder is empty. If unmounted and remounted it shows me correctly folders and files and

  • No low battery alarm when on the call. (Nokia 700)

    There must be some bug with the low battery alarm on Nokia 700. When the phone is on a long call, it just shuts down without any alarm at all. I had this issue several times. My battery shows that it's full for about 30% or something. Then I call and

  • Problem in saving the outline.

    Hi i'm running with a problem. i have deleted the members of a dimension in my outline and now i'm loading it again by build files. when i am trying to save my outline it displays "Unable to complete reading from outline. Out of memory". can anyone t

  • X-FI and BF2 doesn't work like it sho

    After many hours of trial and error, i drop this post here: I can't switch in BF2 to "Creative X-FI" in the sound settings. "Your sound hardware is not compatible, blabla...". I deinstalled BF2, installed it again. I deinstalled the X-FI-drivers and

  • No disc menu templates

    I'm new to video editing and have just installed premiere elements 7, and I have no menu templates in the disc menu section.  Should they be there? Where can I get them?  Thanks