Nokia 6110 and downloading log data to PC

I want to access the phones log data from my PC. eg Menu-
>Log->Recent Calls->Dialled Numbers.
However I cannot work out how to do this using the Nokia PC Suite.
My carrier does not provide me with real time info about how much credit I have used each month. If I had access to this information then I would be able to calculate it.
Anyone got any ideas?
Regards
Dave A

Hey there,
There are several ways you can pull the music off your iPod and onto iTunes. There is a very direct method, which I personally prefer, but there are also numerous third party applications, which will help you accomplish the task as well. The link below provides step-by-step instructions for the direct method as well as a few third party applications if you choose to go that route instead.
Next time, make sure to try and backup your library somewhere where you will know it will be safe. Hope this helps.
Also, remember to authorize your new computer.
http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/
B-rock

Similar Messages

Nokia 6110 and GPS function

I am new to the concept of GPS, and i assumed when i bought this phone that using the GPS was as simple as turning it on and requesting the location you want.
How do I get the GPS to work? I go into the GPS menu and it starts "Getting position...", but i wait and nothing happens. It can never find my position. And I live in Sydney, so it cant be bad reception. Are there any settings I need to instal or download?
Also, what is the Route 66 CD for? I tried to use that and it couldnt detect my phone?

first of all, lets begin with the basics. GPS is a signal that is send by many satellites to locate you. so if you are in a building, you will probably not get any satellite signal. so go outside and wait a few minutes. usually satellites send their position-signal each 30seconds to a few minutes, and your mobile phone has to calculate its place after it got those signals. the update about your position is then easier, it doesnt take 30 seconds to update your position, but it is contionuously.
sometimes it may be possible, that you got problems in cities with huge skyscrapers, that you dont get a signal or just sometimes in those places. that is normal (also no fault of the nokia 6110 navigator). the satellite signals simply dont get through the skyscrapers (you need a last 3 satellites with a good signal to get your GPS working).
the nokia 6110 navigator therefore got A-GPS (that you can also disable). Advantages: the location of yor place is easier and much faster as it gets the information at the beginning from the mobile phone antennas. however it needs therefore a short GPRS-connection (about 5 kb transfer), that might cost depending on your mobile phone provider.
so if you want to try that, enable it in your mobile phone settings (read the manual therefore, network based location method!), and enable it in nokia navigator-program. or disable it in both.
second, about your other problem. route 66 sync software detects your mobile phone, if you use the nokia usb cable provided with the mobile phone (even if other cables also fit, it doesnt work). also you have to install nokia pc suite and isntall the needed usb drivers. and last of all, you have to set your mobile phone to data transfer mode, and not to pc sync mode, to connect it in route 66 sync software!
Message Edited by laxlex on 16-Jan-2008 10:29 PM

Program to download log data from SM35

Hi guru,
I have uploaded some sales order using BDC program.
Now I need to download "the sales order number which are uploaded using BDC for a particular session".
Can you please tell me any program name- which can download that log.
I search 1 program name "RSBDCLOG" from Net.
But in SE38 it is saying that this program does not exist.
Thanks
Rahman

HI,
Why dont you display log to screen and press CTRL+P then
List>Export-> Local File
then select spreadsheet option
Then the file will be saved to you selected directory.
Regards and Best wishes.

Background processing and downloading the data into File

Hi ,
Can you please let me know how to find out the Programname whic is downloadng the data into Excel sheet from application server...
thanks

Hi Ramreddy,
You can use: CG3Y : Transactions for uploading from application server to
                                 Presentation server
                      CG3Z : Transactions for uploading from Presentation server- to
                                 Application server
In both the cases u can put the path to spreadsheet to download to excel...
Reward if found useful....
Message was edited by:
        Susanth Swain

Message stopped processing and not log data

I have an instance of a synchronous scenario (HTTP to RFC) that just stopped this morning before the call adapter step. This scenario ran successfully yesterday and this afternoon. No changes have been made for weeks. The last step to execute in SXMB_MONI was technical routing. I've compared this with a working message and the step looks fine. Rather than a chequered flag next to the message it has a grey circle. When I hold the cursor over the circle the test 'LOG MESSAGE' appears.
I've checked the specific communications channel in 'Comms Channel Monitoring' in RTWB and I can't find the message. The message before and after this message are shown. I've checked the Message Monitoring in RTWB and I can see the Outbound message which has a status of to be delivered.
Obviously the Outbound message cam into XI but doesn't appear to make it as far as the RFC adapter. Is there anywhere else I should be looking to find out why this failed or what caused it not to reach the RFC adapter?

Shabarish,
Thanks but none of the nodes have an error. That is what I find strange. Usually I'll see some problem with mapping or the R/3 system is down but in this case nothing.
When I attempt to restart it via SXMB_MONI it says I can't restart a message of this type.I'm assuming I can't restart synchronous messages.

Extract data from database tables and download in pdf and csv

extract data from database tables and download in pdf and csv
hi how can i re-write my old form procedure in adf java. the procedure used to extract data from diffirent table and dowload the data in pdf and csv.am not downloading image, i what to extract data from diffirent tables in my database and download that data in pdf and csv. i would like to write this in java adf.i just what direction am not asking anyone to do my work this is my learning curve
the form code is
function merge_header3 return varchar2 is
begin
     return '~FACILITY DESCRIPTION~ACCOUNT NO~BRANCH CODE~BANK REF NO.~P/P/ AMOUNT~Postal Address 1~Postal Address 2~Box Postal Code~Dep. Date~Month~BANK NAME~BRANCH NAME~ACCOUNT TYPE~DESCRIPTION~OBJECTIVE DESCRIPTION';
end;
procedure download_file (i_pbat integer) is
dir varchar2(80);
file_name1 varchar2(80);
file_name2 varchar2(80);
appl_code varchar2(80);
fil1 client_text_io.file_type;
fil2 client_text_io.file_type;
dat varchar2(1000);
DATA VARCHAR2(1000);
bvspro varchar2(100);
ssch   varchar2(100);
bvspro_total number(20,2);
ssch_total   number(20,2);
grand_total number(20,2);
cnt    integer;
cursor pbat is
     select *
     from sms_payment_batches
     where id = i_pbat
cursor pay (pb_id integer) is
     select *
     from sms_payment_vw
     where pbat_id = pb_id
     order by subsidy ASC,programme,beneficiary_name
cursor cgref (low varchar2) is
     select *
     from cg_ref_codes
     where rv_domain ='SMS'
     and rv_low_value = low
success boolean;
begin
     set_application_property(cursor_style,'busy');
     appl_code := sms_global.ref_code('SMS','APP_CODE','SMS',0);
    dir       := sms_global.ref_code('SMS','PAY_DIR','c:\sms\batch_payments',0);
         success := webutil_file.create_directory(dir);
     if webutil_file.file_is_directory(dir) then
         null;
--         message ('directory exists');
    else
--                  message ('create directory ');
         success := webutil_file.create_directory(dir);
--         if success then        message ('directory exists');    end if;
    end if;
    for c_pbat in pbat loop
         file_name1 := dir ||'\' || appl_code||c_pbat.batch_number||'-'||to_char(c_pbat.batch_dt,'yyyymmdd')||'pay.txt';
         file_name2 := dir ||'\' || appl_code||c_pbat.batch_number||'-'||to_char(c_pbat.batch_dt,'yyyymmdd')||'merge.txt';
--message('create files ');
--         fil1 := client_text_io.fopen (file_name1,'W');
--         fil2 := client_text_io.fopen (file_name2,'W');
    fil1 := client_text_io.fopen (file_name1,'W','');
    fil2 := client_text_io.fopen (file_name2,'W','');
               dat :=                       'FROM ACCOUNT NUMBER'
                                                            ||'~'||'FROM ACCOUNT DESCRIPTION'
                                                            ||'~'||'MY STATEMENT DESCRIPTION'
                                                            ||'~'||'BENEFICIARY ACCOUNT NUMBER'
                                                            ||'~'||'BENEFICIARY SUB ACCOUNT NUMBER'
                                                            ||'~'||'BENEFICIARY BRANCH CODE'
                                                            ||'~'||'BENEFICIARY NAME'
                                                            ||'~'||'BENEFICIARY STATEMENT DESCRIPTION'
                                                            ||'~'||'AMOUNT';
         --     client_text_io.put_line(fil1,dat);
         bvspro:= null;
         ssch := null;
         cnt := 0;
         dat := '~'||lpad('~',16,'~');
         for c_pay in pay(c_pbat.id) loop
--message('cpay loop ' || cnt);
           if bvspro is null then
                 dat := lpad('~',16,'~');
                 dat := utility.put_field(1,c_pay.programme,dat,'~');
           client_text_io.put_line(fil2,dat);
           dat := utility.put_field(1,c_pay.subsidy,dat,'~');
           client_text_io.put_line(fil2,dat);
           dat := merge_header3;
                 client_text_io.put_line(fil2,dat);
                 bvspro := c_pay.programme;
                 ssch := c_pay.subsidy;
                 grand_total := 0;
                 bvspro_total := 0;
                 ssch_total := 0;
           end if;
           if bvspro <> c_pay.programme then
                 dat := lpad('~',16,'~');
                 dat := utility.put_field(5,ssch_total,dat,'~');
                 dat := lpad('~',16,'~');
                 dat := utility.put_field(5,bvspro_total,dat,'~');
           dat := utility.put_field(1,'Total:' || bvspro,dat,'~');
                 client_text_io.put_line(fil2,dat);
                 dat := lpad('~',16,'~');
           client_text_io.put_line(fil2,dat);
                 dat := utility.put_field(1,c_pay.programme,dat,'~');
           client_text_io.put_line(fil2,dat);
                 bvspro := c_pay.programme;
           dat := utility.put_field(1,c_pay.subsidy,dat,'~');
           client_text_io.put_line(fil2,dat);
           dat := merge_header3;
                 client_text_io.put_line(fil2,dat);
                 bvspro := c_pay.programme;
                 ssch := c_pay.subsidy;
                 bvspro_total := 0;
                 ssch_total := 0;
                 cnt :=0;
         end if;
           if ssch <> c_pay.subsidy then
                 dat := lpad('~',16,'~');
                 dat := utility.put_field(5,ssch_total,dat,'~');
                 dat := lpad('~',16,'~');
           client_text_io.put_line(fil2,dat);
           dat := utility.put_field(1,c_pay.subsidy,dat,'~');
           client_text_io.put_line(fil2,dat);
           dat := merge_header3;
                 client_text_io.put_line(fil2,dat);
                 ssch := c_pay.subsidy;
                 ssch_total := 0;
                 cnt :=0;
         end if;
        bvspro_total := bvspro_total + c_pay.amount;
        ssch_total   := ssch_total   + c_pay.amount;
              grand_total := grand_total + c_pay.amount;
        cnt := cnt +1;
--message('bfore write file 2 ' );
        client_text_io.put_line(fil2
                               ,cnt
                        ||'~'|| c_pay.beneficiary_name
                                                            ||'~'||c_pay.BENEFICIARY_ACCOUNT_NUMBER ||''
                                                            ||'~'||c_pay.BRANCH_CODE             ||''
                                                            ||'~'|| c_pay.BENEFICIARY_STATEMENT_DESC
                                                            ||'~'|| c_pay.AMOUNT
                        ||'~'|| c_pay.address_line1
                        ||'~'|| c_pay.address_line2
                                                ||'~'|| c_pay.postal_code
                                                ||'~'|| TO_CHAR(c_pay.deposit_date,'DD-Mon-YYYY')
                                                ||'~'|| c_pay.month
                                                ||'~'|| c_pay.bank
                                                ||'~'|| c_pay.bank_branch
                                                ||'~'|| c_pay.account_type
                                                ||'~'|| c_pay.subsidy
                                                ||'~'|| c_pay.programme)
              DATA :=                                  c_pay.FROM_ACCOUNT_NUMBER
                                                            ||'~'||c_pay.FROM_ACCOUNT_DESCR
                                                            ||'~'||c_pay.MY_STATEMENT_DESCR
                                                            ||'~'||c_pay.BENEFICIARY_ACCOUNT_NUMBER
                                                            ||'~'
                                                            ||'~'||c_pay.BRANCH_CODE
                                                            ||'~'||c_pay.BENEFICIARY_NAME
                                                            ||'~'||c_pay.BENEFICIARY_STATEMENT_DESC
                                                            ||'~'||c_pay.AMOUNT;
        DATA := REPLACE(DATA, ',' , ' ' );
        DATA := REPLACE(DATA, '~' , ',' );
--message (cnt ||' ' || data);
--message('bfore write file 1 ' );
              client_text_io.put_line(fil1, data);
         end loop;
--message ('end of write');
             dat := lpad('~',16,'~');
             dat := utility.put_field(6,ssch_total,dat,'~');
             dat := lpad('~',16,'~');
       dat := utility.put_field(1,'Total:' || bvspro,dat,'~');
             dat := utility.put_field(5,bvspro_total,dat,'~');
          client_text_io.put_line(fil2,dat);
          dat := lpad('~',16,'~');
       client_text_io.put_line(fil2,dat);
       dat := utility.put_field(1,'Grand Total:' ,dat,'~');
             dat := utility.put_field(5,grand_total,dat,'~');
          client_text_io.put_line(fil2,dat);
         -- close file
for i in 1..50 loop
       if substr(i,-1) = 0 then
             message ('flush ' || i);
       end if;
              client_text_io.put_line(fil1, lpad(' ',2000));
              client_text_io.put_line(fil2, lpad(' ',2000));
              client_text_io.put_line(fil1, lpad(' ',2000));
              client_text_io.put_line(fil2, lpad(' ',2000));
end loop;
         client_text_io.fclose(fil1);
         client_text_io.fclose(fil2);
    end loop;
   set_application_property(cursor_style,'default');
    exception
         when others then
              message(sqlcode ||' ' ||sqlerrm);
   end download_file;    i try this but this code onlydownload image not data from database tables
    public void downloadImage(FacesContext facesContext, OutputStream outputStream)
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
        // get an ADF attributevalue from the ADF page definitions
        AttributeBinding attr = (AttributeBinding) bindings.getControlBinding("DocumentImage");
        if (attr == null)
            return;
        // the value is a BlobDomain data type
        BlobDomain blob = (BlobDomain) attr.getInputValue();
        try
        {   // copy the data from the BlobDomain to the output stream
            IOUtils.copy(blob.getInputStream(), outputStream);
            // cloase the blob to release the recources
            blob.closeInputStream();
            // flush the output stream
            outputStream.flush();
        catch (IOException e)
            // handle errors
            e.printStackTrace();
            FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, e.getMessage(), "");
            FacesContext.getCurrentInstance().addMessage(null, msg);
        }

You should ask your forum in the ADF-forum.

Data missing while downloading the data using GUI_DOWNLOAD

Hi experts,
I'm uploading the Production Order data through excel and in the transaction level it's happening fine.
After running the BDC I'm fetching the Production Order Number(AUFNR) and it's Status from the respective tables and downloading the data along with the Production Order Number(AUFNR) and it's Status using GUI_DOWNLOAD. (Version is 4.6 C)
After downloading some of the Production Order Numbers(AUFNR) and it's Status are missing in the Excel Log sheet . But it's very much there in the SAP tables and also in the transaction screen level.
CALL FUNCTION 'GUI_DOWNLOAD'
       EXPORTING
            bin_filesize            = v_bin_filesize
            filename                = v_name
            filetype                = 'ASC'
            write_field_separator   = 'X'
       TABLES
            data_tab                = it_final
       EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            OTHERS                  = 22.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Kindly give me your suggestions regarding this.
Thanks in advance.
Jessi

Hi,
I am not sure why it is not coming .
But try by uncomment the bin_filesize.
Because generally the size(bin_filesize) specification is for binary files .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*bin_filesize = v_bin_filesize "Comment This
filename = v_name
filetype = 'ASC'
write_field_separator = 'X'
TABLES
data_tab = it_final.
Regards,
Raghava Channooru

Nokia Music purchase/download problem

Guys
Need some help as scratching my head over this
Just purchased a track via music.nokia.com via my mobile as had password problems via my desktop
I've tried to purchase a track via my mobile but it said payment failed so re-added my c/card details to payment options again in case first one I typed in was wrong and attempted payment again - payment failed a second time
Just checked by c/card statement and the 2 purchases have gone through
Ok, so I log back into my music.nokia.com account via desktop to check my purchase history and its says there is none!!!
So basically I need to problems addressing - double payment and the fact that I am unable to download the 1 track I've paid twice for.
Anyone any ideas or can point me in the right direction to get this sorted out?
I've got the Lumia 820 with amber o/s btw
cheers in advance

Hi sairaj318
Thank you for posting and welcome to Nokia Support Discussions!
Nokia Music Unlimited licenses are activated by signing in with a Nokia Account, and once activated personal to the Nokia Account holder. If the same Nokia Account is used to activate a second or third device, the Nokia Music Unlimited licenses are accumulated on that account and only the most recently activated device can be used to access Nokia Music and download music for free. You will be able to play already downloaded music on previously registered devices.
Therefore, if the device is bought second hand, and the license is still in use by the first owner the second owner is not entitled to the Nokia Music license.
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

Schedule job in background and ftp the data to non-sap system

Hello All,
I have a requirement where in i have to write a program(with selection screen) to download 2 files into application server(frequency: end of each day i.e daily at 23:59), and then in turn i need to put those two files into FTP server using FTP script.
i guess my flow of the code should be
1. write the program with selection screen and
2. get the data from corresponding tables and put it into internal tables.
3. then i have download the data into application server
my question is : how i will schedule the job in background to download the data into application server daily? using job_open, job_submit, job_close?
4. then how i need to move the files from application server to FTP server using FTP SCRIPT?
Also my doubt is once i execute the program ONLY, the background job is triigred (because i wrote job_open, job_submit and job_close inside my program). then how will i input the data into screen daily and download the data into application server in background automatically???? i am confused ...
Please help me to solve the above issues
thanks
sangeetha

>
sangeetha s k wrote:
How my data in application server will be transfer to another system using above FM? Because i am not passing application server file path in SAP to that FM. Could you please explain ?
So the path name and the file name are always the same? In that case you could simply create a SM49 entry with hard coded file & path name.
An easy example for the COPY command under WINDOWS OS:
Create a command in SM49 called ZCOPY with following data:
Operating System = Windows NT
OS command: cmd
Parameters for os command: /C copy "C:\tmp\my_file.txt" "z:\tmp\my_file_copy.txt"
Additional parameters allowed: (leave blank)
In this case you would call SXPG_COMMAND_EXECUTE by filling this 2 parameters:
     commandname                  = 'ZCOPY'
     operatingsystem               = 'Windows NT'
In the case that the file name and the path are not fixed you would set the following in the SM49 definition:
Additional parameters allowed: X
In this case you would call SXPG_COMMAND_EXECUTE by filling this 3 parameters:
     commandname                   = 'ZCOPY'
     operatingsystem                = 'Windows NT'
     additional_parameters       = params "<== fill in the path and file name during run time into this variable

Nokia Suite cannot download maps

I just update nokia suite to 3.2.100, then I update maps, of course all maps were gone. Then I download maps, fail.
Right now my GPS there is no maps... Please help.
I use E71.

Hi Taza99,
I have E71, I updated nokia ovi to Suite v.3.2.100. Then I update my maps, of course all my maps will be deleted, and need to dowload the new one. I trying download Malaysia, Indonesia, and Singapore maps, but on trying download there is message "Something's gone wrong". There's a problem with Nokia Suite. Please restart your computer. If the problem won't go away, uninstall Nokia Suite, and download the latest version of the application from www.nokia.com/obisuite"
Then I follow the instruction, but still not succeed.
I attached the error message.
Please your assist.
Thanks.
Attachments:
Nokia_Suite_Cannot_Download_Map_Update.pptx ‏251 KB

Log data types

hi all,
where we used the logdata type in xi.
warm regards.

Hi,
Exchange Fault data will be used in Defining Fault message types and Exchange Log data will be used in logging the data
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
see this help file.
http://help.sap.com/saphelp_nw04/helpdata/en/dd/b7623c6369f454e10000000a114084/content.htm
Regards
Seshagiri

HT203167 My iTunes library on laptop is correct/up to date with recent purchases and downloads; however, our desktop computer does not have any of these when logged into Itunes.... how do I add these so both computers have current info?

The iTunes library on our laptop is correct and up to date with recent purchases and downloads; however, our desktop does not have any of these when using it. Home sharing is turned "ON" with both computers. Why is the desktop not showing the same content and how do I resolve this?

From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
Also see this migrate iTunes library post by turingtest2

NOKIA LUMIA 520: I cannot see my call log date wis...

Dear nokia support team and members,
I cannot view my call log date wise. If i receive call or If I missed a call I need to scroll down to the respective call entry like a treasure hunt in the call log history.
My brother has Lumia 610 which is a old version of wondows i.e.,7.5 mango where in he doesn't have this kind of issue at all. Being a updated model nokia lumia 520 should have this feature and should also expected additional features..But this is really disappointing ..
Please help me to solve this issue..
Thanks !

No, the date and time is correct. Even then the problem is same....

Can I download my data from an iphone to another device, edit it and then upload it back to the iphone?

Can I download my data from an iphone to another device, edit it and then upload it back to the iPhone?
I want to free up memory?

IT depends on what "data" you are asking about.
if you are having storage issues on your phone, I would be happy to make suggestions.
You can store pictures and documents in Dropbox or Google drive. These are cloud storage apps that keep your information stored off the phone, but available any time. You can send pages documents to either app in a different format for editing.
make sure you delete old messages, phone logs, email, as they take up space also.

I get this message when i try to sync and download my iphone: itunes was unable to load data class information from sync services, reconnect or try again later. what does that mean and who do you fix it

I get this message when i try to sync and download my iphone, ITUNES was unable to load data class information from sync services, reconnect or try again later. this has happened twice. i have not downloaded by phone in several months. the first time i got this message i did not understand i and left my phone plug in for 12 hrs and it never did anything. today. when i got the message i just unplugged it.
help

http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US

Nokia 6110 and downloading log data to PC

Similar Messages

Maybe you are looking for