Nokia 6110 keypad light won't turn off

Last night I noticed that on the font keypad of my 6110 the light under the Red hang up key, C and navigator key would not turn off even when I turn the phone off.
I did a software update today but that didn't fix it.
What could be causing it?
I'll probably send it of to get fixed but it will take 3 weeks.
Any help would be much appreciated.

Phone is fried, phone is fried
Bring it, and $199 to Apple for out of warranty replacement.  Bring it, and $199 to Apple for out of warranty replacement.

Similar Messages

  • HP Color Laserjet 3550 - the "attention" light won't turn off

    I've tried everything I can think of for weeks but I can't get the "attention" light on my HP Color Laserjet 3550 to turn off.  It originally came on when a page on from the manual input tray got stuck maybe 20% of the way in.  It was a real easy fix,  I pulled the page out and now the "attention" light won't turn off.  So I can use the printer at all.  I've had this printer about a year. I purchased it used.  I've always had the manual feed tray as the default because I use this printer mostly for envelopes and less than 81/2 x11 printing as I have an old workhorse HP 4+ for all my straight 81/2 x 11 printing. I've rebooted. I've unhooked cables and the router.  I've opened up the printer and removed the casing (the plastic apparatus on the door)  and replaced it. The router is a 2Wire HomePortal 1800HG.  I'm just baffled here I've printed so much with the manual feed tray and I've had allot worse things happen that I've had to fix.  Now a simple stick like this and the light just wont' go off.

    ShlomiL wrote:
    HI Vern,
    Where did you bought the printer? may you bought it from a different region than your current one?
    What is the exact cartridge number of both the black and the tri-color ink cartridge, as well as their product number?
    I bought the printyer in the US and the cartridges also came from the US,  probably no the same state.  Cartdridge # 97,  black # 96.  I don't see a product number.  This is the same # that was in the printer before and the same one I always used.   As soon as I pull it out the light goes out,  and on again as soon as I install it.  This is before the printer even cycles through it's "new cartdridge" routine,  if you know what I mean.
    thanks for the reply

  • N95 light won't turn off when slide open

    I just find this, in rare occasions the backlight won't turn off and auto keylock not fuction(s/w) when the slide is open, but the phone is too shy to do it again after reboot, this is definitely a bug to me. It is a N95-1 with V21.0.016 f/w.
    Message Edited by lotech on 14-Oct-2008 12:38 PM

    I'm having this problem too :/ Help.
    Mine is n95 8gb with the most recent firmware.
    Message Edited by pyradev on 12-Jul-2009 02:31 PM
    Message Edited by pyradev on 12-Jul-2009 02:32 PM

  • H8-1260t Bluetooth Light Won't turn off

    When I first got my h8-1260t you could turn off the Bluetooth light by turning off the adapter.  Now with the adapter off the Bluetooth light on the front stays blue.  How can I get this light to go off when the adapter is turned off?
    Kind of disconcerning to see the light on when you know the Bluetooth adapter is off. 
    Any help would be most appreiciated.

    Original HP Bluetooth Driver - Windows 7
    If you are running Windows 8, it may be included in the Windows Update.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • HT1688 What should I do after my iphone 4s' LED light won't turn off and the camera shutter won't open after it was dropped in salt seawater?

    How can I TURN OFF the LED light and TURN ON my camera shutter on my iphone 4s after it was accidentally submerged in seawater?

    Welcome to Apple Communities
    Water damaged the device, and you can't solve it. Take it to an Apple Store

  • I accidentally dropped macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!

    I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
    I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
    Please help me..

    Accidental damage is not covered under Apple warranty.  And it seems there is much accidental damage.  Only a Genius Bar tech looking at it can tell how much it will cost to repair.
    Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
    There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs.

  • The light next to my camera won't turn off , how do I get it off ?

    The flash for my camera won't turn off and stays on all the time , how do I turn it off?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • My green webcam light will not turn off, when I go into photo booth, it says my webcam isn't connected

    My webcam light will not turn off. It's been on for days, even when I restart and shut down my computer. It also will not allow me to use the webcam, it says that it is not connected.

    I have a similar problem. The caps lock light stays lit. If I accidentally hit it, I won't be able to type anything for a few seconds, like the keyboard is frozen.
    Strangely it doesn't seem to cause me to type in all caps. The light's on, but it doesn't cap lock.
    Also strange is that this started happening recently, after upgrading to 10.5.7.
    Any answers welcome - thanks. I think these may be related issues.

  • HT6114 Camera Won't Turn Off

    Just downloaded the OS X Mavericks v10.9.2 update and now the camera won't turn off!  (green light is on constantly) and FaceTime still doesn't not connect. FaceTime says camera is not available, even though now the green light is on all the time. Any Suggestions?  Have restarted twice with no luck.

    This procedure may show which program is using the camera. It makes no changes, and therefore will not, in itself, solve your problem.
    If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
    Please triple-click anywhere in the line below on this page to select it:
    sudo lsof -Fc +D /L*/Cor*/*/*/AppleCamera.plugin | sed '2!d' | cut -c2- | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • E72 WiFi Icon Won't Turn Off

    Eversince I installed Whatsapp on my E72, the WiFi icon won't turn off. I've tried uninstalling Whatsapp to no avail. I've also installed NetQin to use it to manage resident apps. I've disable all non-core apps and the icon still appears.
    Does anyone have a solution to this problem? I'm hoping that this won't drain my batteries excessingly.
    Many thanks.

    This is not a solution...this is just closing your eyes to a problem...
    When you set Show Wifi Connection to Never..it just stop displaying the icon...
    After setting value to Never, just go and connect to WIFI...now the wifi icon will not be visible...
    So if you are connected to WIFI then you will not get notified.
    I would suggest dont install whatapp unless you are sure as it does some internal setting in Nokia so that wifi remains connected even after you remove whatapp...

  • Switched from DSL to cable modem. My Airport light won't turn green. Keeps blinking orange. No wireless now and can't connect to more than one computer! ?????

    Switched from DSL to cable modem. My Airport light won't turn green. Keeps blinking orange. No wireless now and can't connect to more than one computer! ?????

    Hmmmm.
    If you reset the AirPort Extreme by holding in the reset button for 9-10 seconds and then releasing, the AirPort should be back in default settings which would allow mutliple computers to connect to the LAN ports on the AirPort.
    Power off the cable modem for now and leave it off at least 15 minutes.
    With the AirPort Extreme still powered on, hold in the rest button on the back for 9-10 seconds and release. Allow a full minute for the AirPort Extreme to restart to a slow, blinking abmer light.
    Then, power off the AirPort Extreme.
    Check to make sure that the Ethernet cable from the modem is connected to the WAN "O" port on the AirPort Extreme.
    After the modem has been powered off for at least 15 minutes, power it up and let it run for 5 minutes by itself.
    Now, power up the AirPort Exteme and let it run for 2-3 minutes
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Connect an Ethernet cable from your Mac to one of the LAN <-> ports on the AirPort Express
    Click on the AirPort Exteme, then click Continue to follow the guided setup tp configure the AirPort Extreme.  You can use the same wireless network name, password, etc that you used before, or set up a new name and password, etc.

  • Installed Yosemite...Mac won't turn off.

    Installed yosemite, now my mac won’t turn off completely. All apps are off.  After choosing shut down, It doesn’t shut the white light. It looks like it’s in power down mode. But nothing will turn it back on except having to hold down the power button to completely turn it off in Yosemite. then pressing it again to turn it back on. Help!!!!

    LRD777 wrote:
    Installed yosemite, now my mac won’t turn off completely. All apps are off.  After choosing shut down, It doesn’t shut the white light. It looks like it’s in power down mode. But nothing will turn it back on except having to hold down the power button to completely turn it off in Yosemite. then pressing it again to turn it back on. Help!!!!

  • CAPS LOCK lit, won't turn off

    CAPS LOCK stays lit and won't turn off, keyboard caps remain on. I'm able to hold the SHIFT key and the computer will go into lower case. When typing a sentence with the CAPS LOCK lit, the computer CAPS LOCK light goes off and I'm able to type in lower case. The minute I stop typing, the CAPS LOCK lights and remains on.

    Sometimes electrical components needs to have all power sources removed and reintroduced to work properly.  Try performing a hard reset first, if it doesn't work then we'll move to the next step.
    To Perform A Hard Reset
    Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for  5 seconds); (if the computer doesn't power on, move to the next step)
    Disconnect the AC Adapter from the notebook.
    Remove the battery from the bottom of the notebook.  There will be a switch/button to eject the battery.
    Wait at least 1 minute with all power sources disconnected.
    Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

  • My camera light will not turn off

    My camera light will not turn off.  How do I get it to turn off?

    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • K7N2 Delta ILSR won't turn off, just restarts

    K7N2 Delta ILSR won't turn off, just restarts.  Every time I click on "Turn off computer" in Windows XP, it shuts down, but restarts again. Could this be OS related, or perhaps Bios related. My other machine, almost identical to this one, except that the other machine has BIOS rev 7.6 and this one 7.2.

    PSUs seem to be yr favorite subject, but I'm afraid this time it's software. I experimented some more as the problem only occured after installing the Nvidia drivers. Comparing the system settings in the device manager before installing drivers and after installing them, reveils that the problem shows up when AGP HOST TO PCI BRIDGE is installed. When killing this item the PC shuts off properly. Unfortunately when turning back on, Windows automatically reinstalls the PCI bridge and I have the problem again. LOOKS LIKE A MSI SOFTWARE PROBLEM !
    By the way I have a PCI graphics board and not AGP in the failing PC (the good one has AGP graphics).
    Now what?
    R.

Maybe you are looking for

  • How to (successfully) change Mail Downloads folder?

    Hi, I've been trying to wrestle with my Mail Downloads folder location without success, so I thought I would ask. I dislike having a separate "Mail Downloads" folder because stuff accumulates endlessly there. The default Mail Downloads is at ~/Librar

  • How to transfer GOS attachment to my work item

    Hi Friends,   I have the following requirement. The user while creating a Appropriation request in tcode IMA1N will create an attachment using Generic Object Services(GOS). once he saves my workflow will trigger and it will go to approval. I need to

  • IVR Gateway is receiving "False Calls"

    We are implementing a IVR system across our network, and have over 30 sites converted and in Production. One office is giving us problems in the fact that after they close for the day, their IVR gateway starts receiving calls that appear to have a re

  • What is the best strategy to purge a set of database tables.

    Hi, I have 6 tables I would require to purge data from. 1 parent table - All of the data that needs to be purged are from a partition created on this table 5 child table - Using the parent record identifier, these records needs to be purged as well.

  • Business Process of GL,AR,AP and Asset Accounting

    hi i would like to know what is the business process of GL, AR, AP and Asset accounting  for the following 1) Manufacturing Industries 2) Service Organisation 3) Others if any please help thanks in advance