Nokia 6111 Problem (HELP NEEDED BADLY)

hi, i just ordered and recieved this phone, and i put in the sim card at everything seems to be working just right. but i notced that no matter were i am i dont get any cell phone reception? im in a good area that has great cell phone reception. Is their any way for me to fix this? ohh and my cell phone provider is Cellone wich was bought out by AT&T

as mentioned most ebay phones from far east end up being fake, but as it's a 6111 it may jst be a damaged antenna problem, best thing to do is take it up with the seller, if you have no luck with them, then log a dispute.
if you dont mind can you post the ebay link to the listing for this phone or the sellers name?
Blackberry Bold

Similar Messages

NOKIA 6111 PROBLEMS HELP PLEASE!!!!

RECENTLY BOUGHT AN UNLOCKED NOKIA 6111, IT WORKS GREAT AND I CHANGED THE SETTINGS TO 02 AS I'M ON THAT NETWORK BUT I CANNOT GET ON THE WAP INTERNET AS IT KEEPS SAYING SUBSCRIBE TO PACKET DATA AND I DONT KNOW HOW TO DO THIS AT ALL ? CAN ANY ONE HELP ?
ALSO IS THERE ANYWAY TO GET THE THEMES OFF THE PHONE OR DO YOU HAVE TO HAVE ONE ?

You have to contact O2 and get them to send you the configuration settings as a configuration message which you can then save onto your phone.

Nokia X3 Problem n need Solution

Nokia X3 Problem n need Solution :
the problem is,my nokia X3 ringtone sound so slow/soft...
n the keypad button sound more strong then ringtone sound,n two of them at the full volume...
but,i already put the volume to higher posible ( full volume )..

Some devices may need to have their software reset in order to see the latest benefits, or to resolve other potential problems. - Ensure you have the latest version of Nokia PC Suite. - Backup your device memory to your PC using Nokia PC Suite - Copy your files (music, videos, documents, images etc) from the Nokia N91 hard drive to your PC (use of USB mass storage recommended). - Copy any original SISX, Java, etc. installation files for your applications, themes, etc. from your Nokia N91 hard drive or memory card to your PC. (Do not simply copy over the installed directories/files.) - If your device has an internal hard drive, format your Nokia device’s hard drive by selecting Tools > Hard drive > Options > Format hard drive > Quick format (instructions are also in user the guide). - After the device has completely started up again, reset your device memory by selecting Menu > Tools > Settings > Phone > General > Orig. Phone Settings and entering 12345. - Restore your device memory from your PC using Nokia PC Suite by selecting Backup from the PC Suite menu and then selecting Restore. - Copy any hard drive or memory card contents from your memory card or PC back to your clean hard drive or memory card. - Re-install your applications/themes. If you find my post helpful please click the green star on the left under the avatar. Thanks.

K430 Bad streaming problem - help needed

Hello everyone,
I wonder if any of you can help me or have had a similar problem.
I bought a Lenovo Ideacentre K430 Desktop PC (Intel Core i7 3770 3.4GHz Processor, 16GB RAM, 2TB HDD, DVD, LAN, WLAN, Nvidia Graphics, Windows 8) two months ago via Amazon and on the whole have been very pleased with it.
However I have had a major problem when it comes to streaming video. For example, when watching TV programmes via BBC iPlayer it will stop after about 45 secs and say that there is insufficient bandwith. Yet, when I run the BBC diagnostic it says the streaming speed is 3621 kbps and is sufficient. (I have two laptops in the house and both of these stream video without any problems). I also have the same problem when streaming video from other websites. When using websites generally they seem to load quickly and also when downloading items it seems to do these jobs at a good speed: it is just when streaming it seems to have a problem and stops.
I have even switched the K430 desktop to an ethernet cable to see if that helps - but the problem still persists. All the other devices in the house, i.e. iPhone, Wii, laptop all stream via the wi-fi without any problems.
I'm not that technical , so any advice and suggestions would be greatly appreciated.
many thanks,
Matt

hi Pikemonster,
Welcome to the Forums.
Just to verify, do you get the same issue if you stream via flash player using i.E., Chrome, or Firefox?
http://www.bbc.co.uk/iplayer/tv
Also, have you tried to adjust the video quality (i.e. medium, low, etcl)
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Nokia E7-00 Help Needed

Problem 1: I got a Nokia E7-00 from a friend a week ago. The day I got it, I filled it with lots and lots of applications including games. Now, often it gives an error: "Memory Full: Close some applications and try again". I read the following on another support website:
In order to free memory, you could also remove or move the following:
Messages from Inbox, Drafts and Sent folders in Messaging.
Retrieved e-mail messages from the phone memory.
Saved Web pages. Clear the web browser cache to free some memory (select Options > Clear privacy data > Cache).
Saved images, videos, or sound files.
Contact information.
Calendar notes.
Downloaded application packages.
If there are applications which are not needed any more, uninstall them (select Menu > Settings > Data mgr. > App.mgr. > Installed apps.).
Any other data that you no longer need
I have done this but still not working. On another website I read about deleting files from C:/resources/help but these files cannot be deleted.
Please guide me to solve this problem.
Problem 2: Wifi not working. I have a Wifi connection in my room and in my high school. Wifi was working fine until yesterday. Now, it searches for the connection but says connection unavailable. I am using the same wifi on my laptop, and Nokia 5630XM and its working fine on them. Please help me with this problem
Problem 3: It is not actually a problem but more of a query. When will Symbian Belle be available for Nokia E7?
Keenly waiting for the answers. Thank you

I will suggest you a quick and easy fix for you mate.
1. Back up you important stuff on the nokia suite
2. Hard reset , wipe everything off your nokia e7
3. Run it a few days without any third party apps and see how it goes.
4. Symbian belle is available now, you should check with your latest nokia suite. If its not then maybe your country is not ready for the update.
HOPE THIS HELPS
Join my movement to bring a change in NOKIA for good by supporting my FORUM
http://discussions.europe.nokia.com/t5/Eseries-and-Communicators/NOKIA-MODERATORS-ONLY/td-p/1318965

Linked lists problem -- help needed

Hello again. I've got yet another problem in my C++ course that stems from my use of a Mac instead of Windows. I'm going to install Parallels so I can get Windows on my MacBook and install Visual Studio this week so that I don't have to deal with these discrepancies anymore, but in the meanwhile, I'm having a problem here that I don't know how to resolve. To be clear, I've spent a lot of time trying to work this out myself, so I'm not just throwing this up here to have you guys do the work for me -- I'm really stuck here, and am coming here as a last resort, so I'll be very, very appreciative for any help that anyone can offer.
In my C++ course, we are on a chapter about linked lists, and the professor has given us a template to make the linked lists work. It comes in three files (a header, a source file, and a main source file). I've made some adjustments -- the original files the professor provided brought up 36 errors and a handful of warnings, but I altered the #include directives and got it down to 2 errors. The problematic part of the code (the part that contains the two errors) is in one of the function definitions, print_list(), in the source file. That function definition is shown below, and I've marked the two statements that have the errors using comments that say exactly what the errors say in my Xcode window under those two statements. If you want to see the entire template, I've pasted the full code from all three files at the bottom of this post, but for now, here is the function definition (in the source file) that contains the part of the code with the errors:
void LinkedList::printlist( )
// good for only a few nodes in a list
if(isEmpty() == 1)
cout << "No nodes to display" << endl;
return;
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->name; } cout << endl; // error: 'setw' was not declared in this scope
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->test_grade; } cout << endl; // error: 'setw' was not declared in this scope
As you can see, the problem is with the two statements that contain the 'setw' function. Can anyone help me figure out how to get this template working and get by these two errors? I don't know enough about linked lists to know what I can and can't mess with here to get it working. The professor recommended that I try using 'printf' instead of 'cout' for those two statements, but I don't know how to achieve the same effect (how to do whatever 'setw' does) using 'printf'. Can anyone please help me get this template working? Thank you very, very much.
For reference, here is the full code from all three files that make up the template:
linkedlist.h (header file):
#ifndef LINKED_LINKED_H
#define LINKED_LINKED_H
struct NODE
string name;
int test_grade;
NODE * link;
class Linked_List
public:
Linked_List();
void insert(string n, int score);
void remove(string target);
void print_list();
private:
bool isEmpty();
NODE *FRONT_ptr, *REAR_ptr, *CURSOR, *INSERT, *PREVIOUS_ptr;
#endif
linkedlist.cpp (source file):
#include <iostream>
using namespace std;
#include "linkedlist.h"
LinkedList::LinkedList()
FRONT_ptr = NULL;
REAR_ptr = NULL;
PREVIOUS_ptr = NULL;
CURSOR = NULL;
void Linked_List::insert(string n, int score)
INSERT = new NODE;
if(isEmpty()) // first item in List
// collect information into INSERT NODE
INSERT-> name = n;
// must use strcpy to assign strings
INSERT -> test_grade = score;
INSERT -> link = NULL;
FRONT_ptr = INSERT;
REAR_ptr = INSERT;
else // else what?? When would this happen??
// collect information into INSERT NODE
INSERT-> name = n; // must use strcpy to assign strings
INSERT -> test_grade = score;
REAR_ptr -> link = INSERT;
INSERT -> link = NULL;
REAR_ptr = INSERT;
void LinkedList::printlist( )
// good for only a few nodes in a list
if(isEmpty() == 1)
cout << "No nodes to display" << endl;
return;
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->name; } cout << endl; // error: 'setw' was not declared in this scope
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->test_grade; } cout << endl; // error: 'setw' was not declared in this scope
void Linked_List::remove(string target)
// 3 possible places that NODES can be removed from in the Linked List
// FRONT
// MIDDLE
// REAR
// all 3 condition need to be covered and coded
// use Trasversing to find TARGET
PREVIOUS_ptr = NULL;
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
if(CURSOR->name == target) // match
{ break; } // function will still continue, CURSOR will
// mark NODE to be removed
else
{ PREVIOUS_ptr = CURSOR; } // PREVIOUS marks what NODE CURSOR is marking
// JUST before CURSOR is about to move to the next NODE
if(CURSOR == NULL) // never found a match
{ return; }
else
// check each condition FRONT, REAR and MIDDLE
if(CURSOR == FRONT_ptr)
// TARGET node was the first in the list
FRONT_ptr = FRONT_ptr -> link; // moves FRONT_ptr up one node
delete CURSOR; // deletes and return NODE back to free memory!!!
return;
}// why no need for PREVIOUS??
else if (CURSOR == REAR_ptr) // TARGET node was the last in the list
{ // will need PREVIOUS for this one
PREVIOUS_ptr -> link = NULL; // since this node will become the last in the list
REAR_ptr = PREVIOUS_ptr; // = REAR_ptr; // moves REAR_ptr into correct position in list
delete CURSOR; // deletes and return NODE back to free memory!!!
return;
else // TARGET node was the middle of the list
{ // will need PREVIOUS also for this one
PREVIOUS_ptr -> link = CURSOR-> link; // moves PREV nodes' link to point where CURSOR nodes' points
delete CURSOR; // deletes and return NODE back to free memory!!!
return;
bool Linked_List::isEmpty()
if ((FRONT_ptr == NULL) && (REAR_ptr == NULL))
{ return true; }
else
{ return false;}
llmain.cpp (main source file):
#include <iostream>
#include <string>
#include <iomanip>
using namespace std;
#include "linkedlist.h"
int main()
Linked_List one;
one.insert("Angela", 261);
one.insert("Jack", 20);
one.insert("Peter", 120);
one.insert("Chris", 270);
one.print_list();
one.remove("Jack");
one.print_list();
one.remove("Angela");
one.print_list();
one.remove("Chris");
one.print_list();
return 0;

setw is the equivalent of the field width value in printf. In your code, the printf version would look like:
printf("%8s", CURSOR->name.c_str());
I much prefer printf over any I/O formatting in C++. See the printf man page for more information. I recommend using Bwana: http://www.bruji.com/bwana/
I do think it is a good idea to verify your code on the platform it will be tested against. That means Visual Studio. However, you don't want to use Visual Studio. As you have found out, it gets people into too many bad habits. Linux is much the same way. Both development platforms are designed to build anything, whether or not it is syntactically correct. Both GNU and Microsoft have a long history of changing the language standards just to suit themselves.
I don't know what level you are in the class, but I have a few tips for you. I'll phrase them so that they answers are a good exercise for the student
* Look into const-correctness.
* You don't need to compare a bool to 1. You can just use bool. Plus, any integer or pointer type has an implicit cast to bool.
* Don't reuse your CURSOR pointer as a temporary index. Create a new pointer inside the for loop.
* In C++, a struct is the same thing as a class, with all of its members public by default. You can create constructors and member functions in a struct.
* Optimize your function arguments. Pass by const reference instead of by copy. You will need to use pass by copy at a later date, but don't worry about that now.
* Look into initializer lists.
* In C++ NULL and 0 are always the same.
* Return the result of an expression instead of true or false. Technically this isn't officially Return Value Optimization, but it is a good habit.
Of course, get it running first, then make it fancy.

Urgent Help needed - BADI's in Infospoke

Hi,
My Scenario:
I am pulling data from master data using infospoke into Application server. I need some kind of easy transformations during this stage.
I got ZSTATE field in my data and I need to restrict my output to only certain states(Ex: NJ,CA, TX , MNetc). Since I can't give those selection conditions in infospoke I need to try BADI. I created a BADI and have target and source structure. Can anyone write me small code for this to eliminate other states and allow NJ , CA, MN, TX etc.
Source structure: /BIC/CYZZTEST
target Structure: /BIC/CZZZTEST
infospoke: ZZTEST
Field: Zstate
Class:ZCL_IM_ZZTEST
Method:IF_EX_OPENHUB_TRANSFORM~TRANSFORM
Full points to helpful answer!!
Anil.

The problem is cross user too - I have two user files on the machine and the same thing happens regardless of which user file I'm working in.
That points to s 'system-wide' issue.
Try resetting your SMC.
Resetting the System Management Controller >>
Also, you could try booting from your install DVD and see if it does it there. If it does not, it's more than likely a software issue and an Archive and Install should fix it.
Mac OS X: About the Archive and Install feature >>
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

SQL problem - help needed ASAP!!

Hey guys,
Doing a college project... would really appreciate some help. I am trying to use a variable in the where clause of a select cursor in PL/SQL. The code is this:
procedure results(p_search_entry varchar2, p_search_field varchar2) is
cursor c_results is
select * from physics_b where p_search_field = p_search_entry;
begin
for cv_results in c_results
loop
-- loop through actions
end loop;
The problem is that I don't know how to get the where clause to accept the variable passed into the procedure as the field name. Does anyone know the syntax for this?
Thanks very much!
Niall

This isn't the correct forum for this kind of question. The SQL and PL/SQL forum PL/SQL is probably best.
That said, you can't do what you want that way.
You can do
procedure results (p_search_entry in varchar2)
cursor c_result is
select * fro physics_b where subject=p_search_entry;(assuming subject is a column in physics_b)
You can't use a variable to represent a column directly. You need to build the statement as a string and then use execute immediate.
statement:='select * fro physics_b where '||p_search_field||' = :1';
-- this bit is probably bad syntax.
execute immediate statement using p_search_entry;Look up execute immediate and bind variables

Audio Console Problem - Help Need

Hey everyone.
I'm having a problem here with my creative audio console. I have a Soundblaster Audigy 2 Value series. I've been using this card for about month now and everything has been working great. I've been using the latest beta drivers since i got the card and i've had no problems. I'm using the latest audio console too and it's great. I need the console for the Advanced EQ settings.
The problem is: I went into the console to change the EQ to 'rock' but when i accessed the 'EAX' tab, it was all blank, no settings, nothing. If i go to the 'speakers' tab, there is nothing to choose from also. Anyone got any idea what the problem is?
Audio works fine, just not these features.
I have had this problem occasionally before, but after a restart of windows, everything re-appears again. This time nothing is coming back after a restart.
I've tried re-installing the drivers and console, but nothing works.
Any help would be very greatly appreciated. I do love my Advanced EQ.
Here is a few screenshots of what the console looks like:
http://www.serenityindarkness.com/images/creativescrn.JPG
http://www.serenityindarkness.com/images/creativescrn2.JPG

I am thinking, the beta read me states, some audio console apps may not fuction. The only last resort thing I can think of is a 00% clean sweap. Unistall drivers and ALL media source ap
ps.
Also make sure to delete install sheild and delete C:\Program Files\Creative folder .
Use driver cleaner after you uninstall drivers also, this is to remove all reg keys.
In C:\Program Files folder you should have an installshield folder (hidden) in there are GUID named folders.
Go through them all and any that have a reference to creative, delete the folder.
Install your drivers and apps from the CD. Then update all the media source ap
ps.
Then update you driver. Do not uninstall the drivers though, just over right them and make sure to say yes to over right shared driver files.
NOTE: When you update media source apps, use the auto updater.
Before you do this though, as a test go to windows control panel and you should have audio HQ in here, open it and see if you can change EAX settings in here. If you can, then its just a bad install of media source ap
ps.
Hope this hel
ps.

N97 Problems - Help Needed

Hi. I was hoping someone could shed some light on the problems I am having with the N97. So far I have had 3 of these handsets since my contract with Vodafone started on 1st July and quite frankly, Vodafone customer service is appalling. All 3 handsets I have had have had the faults listed below but I seem to be getting nowhere with Vodafone about them so it seems Im going to have to fix them myself. Here goes with the faults......
*   Key lock slider is slow to respond.
*   Phone in general works very slowly
*   Applications take 20-30 seconds to open, even standard ones that come inbuilt on the handset
*   When typing text messages, I can tap the keys on the screen to type the words, then put the phone down and watch the letters appear ever so slowly on the screen about 20-30 seconds after I have tapped them in.
*   Calls are dropped mid conversation, even with minimum half signal
*   Phone freezes, then resets itself. On restarting, all messages are deleted and email settings wiped. I have tried looking back to c: (I store my SMS on e: and don't have f: which is the memory card slot) and they are not there either. They are just totally wiped from the handset.
I have read about firmware v12 being available but when doing software updates, either over the air or using software updater on the PC, I am told that I am on v11 and that is the most up to date.
If anyone can help with any of these problems, then I would love to hear from you. Maybe you could also tell Vodafone too because they openly admitted to me just this afternoon that they knew nothing about the software versions applied to the phone. So much for "technical support"!
TIA

Blimey, it must be bad if you are getting worse signal on Vadofone than you did with T-Mobile! Ive had 2 contract on T-Mobile and their signal is pretty poor where I am.
Good to hear Im not the only one who is having problems with an N97. I think I will pay a visit to the nearest Vodafone store soon and set up camp in the shop until they sort out my problems. Im absolutely against them repairing my phone though, purely because the one I have now (my 3rd) is a reconditioned phone that has apparently been through all the tests and checks to make sure its working, and it obviously isnt. I dont want to waste time and be without a phone for however long, only to get a phone back that has all the same problems I sent it off with.
Im really pinning my hopes on the v12 update fixing my troubles but to be fair, if it doesnt, then having 3 phones all with the same faults suggests that Nokia have made yet another lemon.  I will never have another Nokia, and will definitely not take another contract out with Vodafone.

Help Needed Badly. Troubles with exporting video...

Hello, I created this account pretty much just for this problem, and I'm running under a very tight timeline so please if someone could give me an answer it would be very much appreciated. I have spent 8 hours over the past two nights as well as 4 hours today reworking, trying different things and combing the online community for any others experiencing these problems and/or solutions, so I am extremely stressed and tired if you could bare with me. So here it is:
I am editing and compiling a theatre production into a movie. I shot the show three times using a Canon HV30, imported the footage on a school computer (iMac, using iMovie '06), exported it in quicktime onto an external HD, brought it onto my computer (which, stupidly, has no firewire). The total file size was 7 hours of footage (85GB), and as a result my HD has about 300MB left on it, and has been excruciatingly slow. I have finished editing the movie, and I am now attempting to share it. All of the sources I have read tell me to share it in Media Browser, which will be accessible from iDVD. I attempted this many times, however I received multiple different error messages, only after watching it 'working' for 4 hours. Some have said that there was no virtual memory left (even after emptying the cache), some said that there wasn't enough HD space left, the exporting had encountered an error, error messages -50, -49, -48, and -47, and the most prominent one that I have been receiving told me that there had been a "parameter error" or something.
After researching online, I found that the '-50' error messages had to do with exporting to a MSDOS HD, which made sense because I was attempting to export to my iPod (formatted in Windows). My latest efforts have been trying to export it onto my HD, which is formatted for OSX, and has 350GB left on it. And yet, all of the problems persist (including error -50...?) any help would be greatly, greatly appreciated, as the DVD was due two days ago.
-Sean

+"Alright, so I moved over the footage and deleted it off the internal..."+
Did you move the Events using iMovie? If not, the project pointers become invalid, and you would get the error you did. While moving the event using iMovie, you don't need to "delete" anything!
Couple of options for you to recover from this.
A> (Slower) Move the Events back to the internal HD, and use iM to move the Event to the Ext HD.
B> (Faster, but convoluted) Create an alias for the specific Event folder (now on your ext HD/iMovie Events folder) under your local HD's iM Events folder. IM will now be able to "see" the files on the internal HD, even though they're stored on the Ext HD.
From the Help File: "To keep an item at its original location and put an alias for it in a new folder, hold down the Command and Option keys while you drag the item."
Sorry you're having to jump through hoops to get this working...

Nokia 7370 Urgent help needed

Hi,
My nokia is having some serious issues and i dont know how to fix it.
it freezes to a white screen with just the battery sign on top i have to turn it off then on to unfreeze it, when it does unfreeze on its own it comes up with a message saying "check connection settings" i have tried clearing my messages and deleting pictures and music off it to try to resolve the problem this has not worked.
Sumone please help!!!.
Thanks in advance

if at all possible back up all your data and take it to nokia care point for assistance.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Linked excel file problem - Help needed

I have 2 excel files in the same directory in Content Services. The "destination" file has a link in one of its cells to a cell in the "source" file. I want to be able to open the "destination" file and update the data if any changes have been made to the "source" file.
My problem is when I try to do this i get an error that says "This workbook contains one or more links that cannot be updated" and two options.
1) To change the source of links, or attempt to update values again, click Edit Links.
2) To open the workbook as is, click Continue.
If I click Edit Links I am then presented with a screen where I can open the "source" file. When I try to do this though I am given a login screen. Supplying a valid Content Services username and password doesn't work and I cannot open the file.
Can anyone tell me how I can open the "destination" file without having to open every "source" file? I don't want to open the "source" files because there could be dozens of "source" files for one "destination" file.

setw is the equivalent of the field width value in printf. In your code, the printf version would look like:
printf("%8s", CURSOR->name.c_str());
I much prefer printf over any I/O formatting in C++. See the printf man page for more information. I recommend using Bwana: http://www.bruji.com/bwana/
I do think it is a good idea to verify your code on the platform it will be tested against. That means Visual Studio. However, you don't want to use Visual Studio. As you have found out, it gets people into too many bad habits. Linux is much the same way. Both development platforms are designed to build anything, whether or not it is syntactically correct. Both GNU and Microsoft have a long history of changing the language standards just to suit themselves.
I don't know what level you are in the class, but I have a few tips for you. I'll phrase them so that they answers are a good exercise for the student
* Look into const-correctness.
* You don't need to compare a bool to 1. You can just use bool. Plus, any integer or pointer type has an implicit cast to bool.
* Don't reuse your CURSOR pointer as a temporary index. Create a new pointer inside the for loop.
* In C++, a struct is the same thing as a class, with all of its members public by default. You can create constructors and member functions in a struct.
* Optimize your function arguments. Pass by const reference instead of by copy. You will need to use pass by copy at a later date, but don't worry about that now.
* Look into initializer lists.
* In C++ NULL and 0 are always the same.
* Return the result of an expression instead of true or false. Technically this isn't officially Return Value Optimization, but it is a good habit.
Of course, get it running first, then make it fancy.

Layout Problem, Help Need

I developed one custom Report, which will print on pre print stationary. Really Problem here is when i send to printer it will printer properly on 8/12 By 11 Page, but i don't what is the reason it is not printing on Page after 7 Inch, even i thought i increase layout width it dos't Print after 7 Inch on Page, can i know why it is doing like these, any clue, please let me know.
Report Verions : 6i
Main Section : Width => 8.5
Height => 12.5
Orientation => Portrait
Report Width => 80
Report Height => 90
Your Help Rally appreicate in advance.
Thanks,
Praveen

You may need to contact support and actually show them the report to really solve the problem, but here are a few things to check first:
a) Check the report margins, make sure that they will allow the report body to display past 7".
b) Check that the frames and repeating frames are set to horizontally variable, or expand so that they can grow if required.
Hope this helps,
Danny

9i Developer suite login problem. help needed ASAP

i installed oracle 9i developer suite, my problem is i can't login. this is the error ora12560: TNS: oracle adapter error.
or
if i put the hostname it displays a no listener error and closes. i tried to create a listener in net configuration assistant, but i can't see it in services.
i'm using windows XP. and not conneted to any machine.
do i need any changes on my window settings?
please help...
thanks
here is my listener.ora
ABC =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\OraHome)
(PROGRAM = extproc)
tnsnames.ora
TEST.ABC =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABC)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = test.ABC)
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle)

check your operating system network protocole is TCP/IP is installed if so check is there any problem with these protocoles. this error is encounter generally due operating system network protocoles it is not an oracle error. here is discription.
TNS-12560 TNS:protocol adapter error
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification. Before reporting this error, look at the error stack and check for lower level transport errors.For further details, turn on tracing and re-execute the operation. Turn off tracing when the operation is complete.

Nokia 6111 Problem (HELP NEEDED BADLY)

Similar Messages

Maybe you are looking for