Nokia 6120c problem after FirmWare update

Hallo!
I've found a serious bug in new firmware v4.21 for my phone 6120 classic. Adapter AD-44, which has been working normally before phone update, doesn't respond when I took an incoming call - phone doesn't response for microphone signals and buttons; a caller listen sizzle only.
The Russian T9 has bugs too.
Message Edited by anychall on 19-May-2008 09:48 PM

i upgrade the phone software it run and install on the cell its shutdown and start again, the first time message on screan is [local mode] and then it shutdown again
when i press the power again, screen become white no logo shows on screen and it turn off again i use the 3 finger button solution Green, * and 3 then press power to reset it but it not work white screen comes up and shutdown again.
please help me
Nokia 6120 clasics
RM-243

Similar Messages

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

C3-01 Problems After Firmware Update

After updating the firmware from v5.65 to v6.0 the phone lost some features -namely:
Chat
Media Player
Ovi Store
"Favorite Contacts" on homescreen
default wallpapers
Solved!
Go to Solution.

Finally, I've fixed the problem!
Going back, I updated the phone from 5.65 to 6.0 via OTA(over-the-air) update -in other words, I updated the firmware using the phone while connected to my home wi-fi network.
In desperation to find a solution, I hesitantly re-updated the phone... But this time via PC.
I opened Ovi Suite and updated the phone -again, expecting it would reinstall version 6.0 .
After the update, all the apps that I've lost came back.
I then checked to confirm if it was indeed version 6.0 -alas, it was not... It was version 6.05.
Now, everything is working as it should be; mail, chat, ovistore, calculator, favorite contacts on homescreen -everything!
It feels good to figure it out all by myself. Hehehehe!!

Audio in problem after firmware update

hey all,
I've recently started using garageband to record and play around with my music, and I love it. Unfortunately, after installing the recent firmware update, my computer's audio in jack doesn't work anymore. It recognizes that there's something plugged in, but instead of having an signal, I get this clicking that clips the audio input at almost any input volume. I have tried it both with my bass and just the cable, and I have also just plugged some headphones into the jack- same results for everything. Is there anything i can do about it or do I just have to wait for another firmware update before I can use garageband again?
2.2Ghz Macbook Pro Mac OS X (10.4.10)

well what happened was I was updating iTunes (7.3.1) and the updater said a quicktime update and a firmware update were both available so I downloaded and installed and now the problem. It's like a really fast click track when I plug in and it's not just in garageband, I'm getting it in the audio-in option in the system preferences menu. Do you think doing a system restore would solve this problem?
PS- I believe the update was something along the lines of a "kmbp firmware update" I think that's what it was called... :/

Overheating problem after firmware update

Hi,
A friend of mine noticed a CPU temperature increase in between 10 and 15 per cent, after the MacBook EFI Firmware Update 1.1. Has anyone else noticed a similar behavior? Any ideas or suggestions?
Thanks in advance,
Gonzalo

Originally Posted by ketter
HP DL380 G7
OES 11 SP1 / SLES 11 SP2
patched up to March 29, 2013
HP LTO-5 Ultrium 3000 tape drive
Arkeia backup software
Everything was running fine. I updated the server firmware using the
HP Proliant Service Pack on Apr 10, 2013 and haven't been able to get
a good backup since. Arkeia support says problem with the hardware.
But testing with the HP diagnostics says the hardware is fine. I
checked with HP support and they agree that the hardware is fine but
there are some communication issues. They recommended that I upgrade
the driver. They sent me here:
HP Smart Array P212 Controller*-* * RECOMMENDED * HP ProLiant Smart Array Controller (x86/AMD32) Driver for SUSE LINUX Enterprise Server 11 (x86) - HP Business Support Center
I attempted to install that, but it failed due to dependencies. So
before I go any further and risk messing something up. Does anyone
have suggestions for this? If I do need to update the driver, is
there another way I am supposed to do it vs using the driver from the
HP website? Or how do I deal with the dependency issues...the only
patching I have done with SLES so far is through the channel.
Ken
may i ask what kind of dependency issues you're facing? i've installed the SP2 (kernel 3.0.x) based package last weekend without any issues on a default kernel. are you sure that you've grabbed the rpm matching your kernel version?

N78 problems after firmware update

I have recently updated my N78 (RM235) firmware to 13.052.231.6.
Before the update the internal GPS worked very well, finding satellites quickly and holding a strong lock. After the update the GPS is very poor, taking a long time to find satellites and loosing signal very easily.
Can anyone help with this problem or tell me how to re-install the previous firmware?

Has everything else stayed the same and only the GPS antenna reception got worse?
If that is the case you are right, but maybe the update made other improvements and for some reason one of them worsened the GPS antenna...just guessing...
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Problems after Firmware update

I have a big problem with my ipod nano, @ the firmware update it disconnects from pc and now it didn't work anymore because of a mistake in the firmware what can i do? please help me

If you have symptons stated on this thread, try the steps there.
http://discussions.apple.com/thread.jspa?threadID=544840&tstart=0

E3000 problems after firmware update

It seems internet browsing doesn't work after the firmware update. Everything else works , aim steam msn, bittorent but anything http related will not work.

on both computers i have run some tests
ping 127.0.0.1 -fine
ping 192.168.2.1 - fine (gateway)
ping 192.168.2.3 (another computer) fine
ping 192.168.2.254 dsl modem (fine)
ping www.comcast.net fail
I have thought it could be the DSL modem but it works just fine when i use my Belkin pre-n router and the Belkin never needs a power cycle.
I can get HTTP functions when i reboot the router.
I have also set up a DYNDNS to see if a friend could ping me and connect to a server for me thru my IP address and it was successful its just websites and this is happening on all the computers and playstations (theres 2)

Sony SBH50 Multipoint problem after firmware update

I recently updated the firmware on Sony SBH50 bluetooth headset and now, I cannot use Multipoint anymore. I have to switch off and pair individual devices while Multipoint was working well before the firmware update. Please advise what to do

I just purchase it and I cannot connect to my Z3 in same time as my Z3 tablet compact. it is last version of soft and on firmware

Nokia 5800 Screen Problems After Firmware Update V...

Hi all,
I have the Nokia 5800 navigation edition. I just updated the firmwareon it from V40. to the latest available 51.2.007. Doing so has turned the phone's screen into a huge mess - the lower half of the screen is all white and the upper half has some weired flickering and the icons(the ones that are visible) are all messed up too and some of them are not responding at all.
Heres what I've done to resolve the problem:
- remove the battery, memory and sim cards for a few hours.
- reboot the phone without the memory card(eliminating any corrupt setup files).
- reinstalled the V51.2.007 update several times using bothe the Ovi Suite and the older Nokia PC Suite updater.
- tried running the updates on all XP, Vista and Windows 7.
Can you please advise me of any other possible solutions I can try. Is there any way to revert back to the older firmware. The phone was working just fine before the update.
Thank you all for your help.

There is another way to hard reset your phone and it is as follows.
With your phone powered off, press and hold Green + Red + Camera Keys. Then power on phone using the on/off button whilst keeping the three keys depressed until you see the Nokia Shaking Hands Logo.
Always remember to backup your phone before performing resets as your data may be lost.
This reset will revert the phone to its out of the box state, so it will revert back to the original version of Maps that came with the phone. However, this should be an issue as you can easily redownload and reinstall the latest again.

Nokia N82 wifi problem after firmware update

Phone is restarting while connecting with WAP
and invalid server name while putting wep key

23-Nov-2006
03:11 PM
mobile_maniac wrote:
Ishvin, I'm sure I've read somewhere that the firmware on your phone can't be downgraded.
One question though... if the old 100% used to hurt your ears, do you really need the old volume levels back?! That may even be the reason it has changed if Nokia thought the same thing... I'm sure they wouldn't want you sending them a bill to get your hearing fixed! :-)
yes this is true but stil i want it loud enough so i can't hear it outside. i just hope they put the volume back up on the next firmware

Nokia Maps lost after firmware update

I had Nokia Maps installed on my N73 some time ago, it worked without problems. Now when I updated the phone software to v4.735.3.0.2 it is included in the base software. But the new version (1.2) does not show any map data - only a blank screen (and the globe).
I use only the free parts - no network, no GPS, no guides. The maps I downloaded with Map Loader. It has a new version too, so I installed it, deleted the old maps and re-downloaded some of them. But they still do not show onscreen.
There is also a downloadable version of Nokia Maps 1.2, but it cannot install on the phone - some error appears. Neither can I uninstall the version on the phone - it says "Cannot delete file".
What is the problem? Is it that the phone language is Bulgarian, while the maps are in English (there are no maps in Bulgarian)? It was not a problem before, and the UI still appears in Buglarian.
Or, maybe there are some trays of the older version which I can delete manually. In fact, it was first installed in phone memory (so were the maps). Then, I moved the maps to the memory card, and after a previous phone software update, I installed the application on the memory card too.
Please help me find the maps. Thanks!

I managed to view the maps somehow:
1. Connect the USB in card reader mode
2. Download the maps using MapLoader
3. While the memory card is connected, copy and paste the \private\20001f63\diskcache folder to \cities\diskcache in Windows Explorer
4. Disconnect only from the tray icon on the desktop
5. The maps are now visible.
This is obviously not a perfect solution. The maps use double space on the memory card. The network cannot be used to update them, only Map Loader. After any download the steps above must be reapplied.
The application cannot be uninstalled/reinstalled. It seems all the problems appeared when Nokia Maps was included in the firmware and concern users which had installed it before on phone memory. I hope they will be resolved in next software update from Nokia.

5800 problem after firmware update

hi!
I updated my nokia 5800 yesterday to the new firmware v50. But today the whole touchscreen does not work at all. Only the three physical buttons and the unlock button on the side works. I have tried to turn it of but it did not help. I took out the battery and the memory card but i have still the same problem. Does anyone of you know what is wrong?

/t5/Nseries-and-S60-Smartphones/5800XM-hard-reset-after-upgrade/m-p/462564#M137151
So.. might have to go for a Hard Reset.. but Take a Back-up before doing...
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

N78 GPS problems after firmware update

I have just updated my N78 firmware to 13.052. Before the upgrade the GPS worked really well but after it struggles to lock on and hold position. It took an hour to find satellites earlier and as soon as i picked the phone up it lost its position.
Has anyone else had a similar problem?
Is it possible to reload the previous firmware?

I had the same experience.
Yesterday roaming across forums I saw a post suggesting a phone reset as simple as tooking out the battery for ten seconds and restarting the phone.
Well, I opened the back cover, took out the battery for around ten seconds and closed the phone being careful to align the pins of the internal GPS antenna to the back cover GPS antenna.
Then I restarted the phone and after two minutes it sees four satellites, and after five minutes nine satellites, completing the fix in less than five minutes.
Today, the GPS is still working (I tried the fix ten minutes ago with the same times).
Therefore, I consider the problem solved.
Moreover, the internal GPS now works also with Google Maps, and this according to my opinion demonstrates that probably the problem is not Nokia Maps 3.0 , because I am using Nokia Maps 3.0 and Map Loader 3.0 .

5800 problems after firmware update

Hi!
I've just updated my the firmware of my phone to v50. At firs everything seemed OK, but every time I unlock it and try to enter the applications folder nothing happens. I can still enter it by selecting options-> open and after a couple of minutes it suddenly starts to work again but as soon as I lock the phone (or it locks by itself) and unlock it again the problem returns. What the hell am I supposed to do? Can I go back to firmware v40 - it was working just fine, and the new kinetic scroll is **bleep** anyway... Please, please, please help... I'm starting to lose my patience with this piece of junk...

Try to reinstall current firmware (v50.x.x).
"Can I go back to firmware v40"
Sorry you can't.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Nokia 6120c problem after FirmWare update

Similar Messages

Maybe you are looking for