Nokia 6124 classic wont work with the USB Data Cab...
Hi all,
I'm trying to connett Nokia 6124 classic but its not working with the USB Data Cable. Is there a way to fixing it yourself?
Thanks
Jonathan 'Jonnie'
You should install the drivers first before connecting your phone. Drivers are bundled in with pcsuite/ovi suite which can be downloaded from here.
Similar Messages
-
My iPod stopped working with the USB in my car but still works on it's own. Any suggestions?
My iPod stopped working with the USB in my car but still works on it's own. Any suggestions?
Read the car user manual and/or contact the car dealership.
-
Help : Not able to connect IdeaPad Tablet K1 to PC with the USB data cable
Dear All,
Appreciate very much your help on this.
I am not able to connect my IdeaPadTablet K1 to PC with the USB data cable.
Anyone facing the same problem?
Appreciate your kind advise on the solution.
thanks in advance,
LL.Hi all,
Can you try the steps outlined in the following link? It had help resolve the issue for some users.
http://consumersupport.lenovo.com/au/en/HintsandTips/hints_show_13180405354336.html
Do feedback.
thanks!
lak_sg
WW Social Media
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
My G2 iPod that I use as an external drive to archive memory cards on the go cannot link with my new 13" Macbook Pro cause it uses a firewire 400 lead. It will not work with a USB lead. Is there a firewire 800 ipod lead or converter available? Can any one shed some light on this please?
As far as I know, if a harddrive works with a Macpro, it should work with the Macbook: if your Macbook is low on power, plug in the AC adapter
If your Macbook has a firewire port, then it should be fine. BUt i would do somemore research first. -
Ipod classic wont work with Itunes
This is my first ipod purchase and I am not pleased, its 2 days old and still isn't working. I did exactly how the instructions set out how to set it up. I plugged the ipod in, it charged for a few minutes, and a menu popped up on the screen for my language, I selected it and then it went to the connected screen, and continued to charge, I loaded itunes, nothing appeared, so I decided to let it charge to full, after it had been fully charged, still nothing, I have done everything apple have suggested, reset ipod, unistalled itunes, reinstalled, turned off the ipod service and turned it back on again, used a different USB port, itunes just will not find my ipod, therefore I cannot set it up to add files to it. I am extremely disheartened by how incredibley difficult this has been as this is my first apple product
When connecting to your Mac, make sure it is a high power USB2.0 port on the CPU body, do not use the USN port on the keyboard or any USB Hub.
If you are connecting to a MacBook Pro, only one USB port can provide enough resource for the high Drain device like the iPod. The other USB port is shared internally with other IO devices.
Given the huge amount of iPod Classic sync issues, I would recommend, that you dont use any USB port with other devices, when you are syncing or Restoring any iPod Classic.
So with the above info
Reset you iPod while connected to the High power USB port.
When iTunes comes up and prompt you to Restore, please do so (this will fix any hardisk filesystem corruption)
Good Luck! -
On the new Ipad 4G (Verizon) - I am unable to Hotspot it with the USB Cable. I can do it with Wi-Fi and Blue Tooth just fine - but not directly connected from the iPad3 to a Windows 7 PC. It detects, it even opens up the Folder os that I can see the DCIM but no internet on the PC (but works fine using Wi-Fi or Blue Tooth hotspot). Any ideas ?
Attach the cable to your iPad and then to the USB, than go to settings chose the third option "personal hot spot" turn it on, a notification will pop up asking you if you want to use wifi or Bluetooth just select no and automatically work.
-
Has anyone Worked with the Essbase Data Mining Module?
I'd appreicate if you could post a message if you have worked with the Predictor and Target Range Expressions, and data mining models in general? I am looking for some insights into what Essbase Data Mining can do...<BR><BR>Thanks.<BR><BR>- Sherwin
Yeah, unfortunately I am coming to the same conclusion.
This is the entire response I received for "instructions"
There are two projects: "fire_text_project" and "fire_text_project_plugin". The first once does not require any plugin because one particle effect is pre-rendred. If you have trapcode particular then you can use the second project and modify it.
Finally you can create a realistic fire text in after effects!
It took me a week to do the 3d fire simulation and render out all the 26 letters on fire. This is a very realistic fire thats simulated using advanced 3d software. The video is 621 x 720 px and it is 7 seconds long. All the letters has the color video and the black and white (alpha) video. You can use the alpha matte to create a tranpsarent background for the colored video. That's is how it is done in the two example comps included in the project. You will have to understand that the letters are video so it is not as easy as typing the letters using text tool to edit the text. Open the "1st text Example comp 1" comp and it has marker that explains in detail on how to edit it.
The two included comps are "Example_comp 1" and "Example_comp 2". These are great examples of what you can do with fire text but the possiblity is endless.You can create many interesting comps with these text on fire. Just to let you know the text that is rendered in 3d app is Arial Black.
Think I am going to have no choice but to simply cancel the sale and look for something else.
Thanks for all the input.
Mike -
If i buy a Unlocked iphone 4s and use it in another country, will it work with the countrys Local data Services
hi guys,
i recently bought a new iphone 4s factory unlocked. in order to avoid sim failures and invalid sim errors or No service errors, Each phone has to be unlocked by connecting it to the Itunes.
Kindly follow the below steps to avoid any SIM card conflicts
iPhone FULL Unlock - How it Works:
-Connect your iphone to itunes without any network sim inside and when connected click on the iphones name.
- Click Restore install latest version of iTunes on your Pc or Mac or click check for updates
- Let itunes Backup your phone and then Flash to the Latest Version.
- Now disconnect phone and reconnect after 10 seconds.
- Now Enter another network simcard that's not the same network its locked on to
- Connect phone to iTunes with not accepted (not valid) simcard
- Wait until iTunes detects the phone
- iTunes will display (Congratulations, Your iPhone is now unlocked)
- Phone Unlocked
- just follow the instructions about activating the Iphone.
and iphone is unlocked
NOTE : This is the only FULL LIFE TIME UNLOCK solution for Apple iPhone as the IMEI is registered as UNLOCKED in Apple database.
This solution should be used ONLY THOSE WHO BOUGHT FACTORY UNLOCKED iPHONE 4S.
Your phone will always be unlocked even after each new update of your phone firmware !
All reasons given like bad IMEI series, manufacturing defects etc blah blah are not logical as everything was tested before every sale. -
Screen wont work with the nokia 5530
I basically turn on my phone and then screen is not touchable anymore and message comes up with ' 2 new messages' and i try to show it but i cant because the touch screen is not working. It just happened randomly and i only got this phone at Christmas. I dont know why it has started doing this and the only app that works is camera and the middle button that looks like a dash at the bottom of the phone with the red and green button thats all that is working. i was trying to see if there is a way i can fix this problem or can i take it back to carphone warehouse and get a new one?
NOKIA PLEASE RESPOND AS I AM VERY ANGRY AT THIS PROBLEM.first turn off your phone and pull out the battery for at least 5 minutes. Put it together and turn it on. Does it work?
if not - try to boot it without the memory card and see if it works...
It might be a software issue, or it could might be a hardware issue with some loose connection. - If that's the case only a Nokia care point can fix this. - I dont think CPW will give you a new phone the first time. - I would guess they would send it in to repair, or firstly the would probably try to reset it... -
Ipod wont work with my usb ready cd player
I just bought an insignia cd player that has a USB port for MP3 players and flash drives - they told me at best buy that it would work - they know for sure from trying that the shuffle and video ipod works but it doesn't seem to work with my nano. I am trying to find out if I am doing something wrong (when I plug it in it recognizes that I have plugged it in and the ipod begins charging and then says do not disconnect like it is updating only it doens't stop saying it and wont let me access anything on it) and I also want to know if maybe there is any kind of adapter that will let me use the nano - best buy said it might be to new since the other kinds work. Does anyobe have any suggestions!?!
In your iPod options there is a check box to "enable disk use". You have to turn that one and then it will appear as a drive on your computer. You have to drag songs to it just like you drag any other type of file to copy them. The problem with this method is that you can't control the playback from the iPod, and it will take double the amountof space because the iPod won't play the songs if they are stored in the disk portion. So you would have to have one copy for iPod and one copy for CD player. But why do you want to do that in the first place? The iPod will already play back all the songs, and with a lot more control than the CD player has.
-
Help my Mac mini wont work with the airpot
I have got the Mac mini Intel Core Solo G5 model and ive got a ibook G4 my G4 works great and fine but my mac mini does not. I connect to the base station fine useing the drop down bit on the taskbar in finder and enter the password and it connects. But when i do network assistant and it asks for me to eneter the password again it just basicly frezzes for a min then says invalid password when i know that it is the write base station password. It did work once but froze again and said could not connect. and when i go into the airport utlity it can't descover the base station even though it says it is connected with a full signal, im doing the excatly same things i did with my ibook but it just wont work. Please can someone help me and tell me what i have to do or give me some support this is my last hope as apple aren't intrested. I will be very gratful!
The software update was for Intel based Mac computers and does not specify Core Duo or Core 2 Duo:
AirPort Extreme Update 2007-001
This update is recommended for all Intel-based Macintosh computers and provides compatibility with AirPort Extreme base stations and networks.
This is the update that generated a fix at www.macfixit.com because some folks have been having issues with connection with their internet provider and some people have had issue with their airport systems just shutting down.
It was part of an auto update that was received. One of my Macs is a MacBook Pro Core Duo (not Core 2 Duo) and this upgrade (download) was part of the update check that is automatically performed. -
My ipod classic, (that I've previously used on another mac), is not working on my new Macbook Pro?? I've had all my music transered to my new Macbook, but can't upload anything onto my ipod :-(
When I tried the headsets again, they all work. I didn't have one of them plugged in far enough. I guess didn't want to breakanything. Thanks for your reply. All fixed!!
-
Plug-ins were disabled
There usually is a delay of a few weeks before Kaspersky updates its Firefox add-ons for a new version.
Have you installed patch "I" which added support for Firefox 12 (released May 4th)? Not sure whether that helps with Firefox 13. More information: [http://support.kaspersky.com/kis2012/tech?qid=208286519 Kaspersky Internet Security 2012: patch I for version 12.0.0.374]. -
Can I charge my iphone4s in the cpu with the usb cable?
I've been trying to charge my phone at my work with the USB cable and the cpu but I can't. are there any settings on this since when ever I get home and charge my phone there is no other problems.
Why don't you contact your IT department?
-
My iPod classic wont connect to the computer. The light comes on but it doesn't even come up with 'connected' screen on the ipod. Have tried different computers, usb cables and ports, as well as restarting computer, updating itunes, and rebooting ipod. Still works in Logitech iPod player, however it has just wiped itself of all songs so at the moment I'm stuck with a useless iPod. Any suggestions please???
If you happen to have a USB docking cable that is new (or close to being new), try using that one. If the cause is the dock connector on the iPod becoming worn, if you try it with a cable that is not worn, it's possible that it may connect for data.
I believe the dock connector is internally part of the logic board, so it may not be economical to have a repair shop (including Apple Store Genius Bar) do the repair. You'll need to ask for pricing.
If you are good at such things, this web site has DIY repair guides
http://www.ifixit.com/Device/iPod_Original
If it's the most recent iPod classic, it appears to be quite difficult to pry open. I have an older 4th gen (and 3rd gen) "classic" iPod, and those are fairly eash to pry open, using the plastic tools.
Maybe you are looking for
-
Is Adobe Premiere Elements 10 compatible with OS X Yosemite?
I have Adobe Premiere Elements 10 that I use on my IMAC. I recently updated my operating system to OS X Yosemite and when I go to use the add menus portion of the the program it consistently crashes. I have uninstalled and reinstalled Adobe Premier
-
I have a T5 and am using Vista. Recently, I discovered that the handheld and my PC are not exhanging data in the calendar and contact sections. The hotsync mgr. states that the sync was successful. I checked it with DbFixIt and it did not detect p
-
Noise coming out from the top of iMac
Noise keeps coming from the top of the machine.
-
Closing Production Order error
Dear All I am hoping someone can point me in the right direction. When we try to close some Production Orders we get a message "There is still a Purchase Requistion Commitment for Ord XXXXXXX" where XXXXXXX is the produstion order number. We get this
-
When trying to import movies from my Panasonic camera into iMovie I get the message "No storage location set". What to do?