Nokia 6133 connect..disconnect..conect..disconnect...

MY Nokia 6133 does not stay connected! I plug it into the recommended ca-53 usb cable to the nokia suite and it loads driver and shows up as connected then all of a sudden it disconnects and connects over and over again!
Can someone help me with figuring what the problem may be?
Thanks alot............... Olstoro

well the obvious seems to be that the physical connectio between the phone and cable or pc and cable seems to be somehow loose

Similar Messages

  • Bluetooth connection - Keeps connecting / disconnecting in car.

    Hi, 
    I've recently got a Z2 phone and i love it all apart from when I get in my car.
    It connects, disconnect, connects, disconnnect, and so on and so on for as long as Im driving.
    I've done all I can think of.
    Reset the phone, unpair the devices etc.
    does anyone have any idea? is this a known issue?

    I guess nobody has this issue?
    The car is a 2014 Vauxhall Insignia
    I've had the garage look into it but they have no problem getting other phones to connect to the vehicle, even my old Nokia 920 works fine.

  • Connecting & Disconnecting Bluetooth Hangs Lumia92...

    I've begun to notice that when my Lumia920 connects & disconnects multiple times with my vehicle's Bluetooth, the phone hangs & requires a restart. (It happens when I have to make multiple stops while grocery shopping)
    This was not the case when I was using my simple NokiaC300. There was no problems doing the exact same tasks.
    Any suggestions?

    CanadaLumia920, sounds a like a bug. You should report this to the head-unit manafucturer of your car. He is able to debug this because he has your head-unit. Nokia or Microsoft might not have your head-unit. Then, your manufacturer tests your device and with his professional tools is able to debug this. Then, your manufacturer is able to determine if it is his bug, a Nokia bug or one of Microsoft (because of Windows Phone). Then, your manufacturer is able to file a qualified bug report to the one causing this. And if you have luck, it will get fixed through an software update.
    The bottom line of this story: You cannot do much. Bugs happen. Rather go back to your old mobile phone. Some network operators offer to buy an additional SIM with the same number, so you can use your old and new phone in parallel.

  • Phone connected/disconnected notification

    I'm using Nokia PC Suite 7.1.40.6 on XP sp3. Can I turn off the pop-up balloon in the system tray that notifies you of a phone connection/disconnection?

    Yes, you can exit the program from the system tray and the phone will still be connected.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • IPod touch 4th gen stuck in connect/disconnect loop, will not charge on desktop PC, but is recognized fine by older laptop?

    I have an iPod 4th gen that up until the week before was connecting and charging fine on my desktop computer (running Windows 7(64-bit)).  Now, when connected to the USB ports on my desktop, it goes into this rapid and unending connect/disconnect loop, never staying connected long enough to even be recognized by the computer.  There is an error message that also says that charging is not supported by the computer, when before, things were fine.  Despite all the problems on the desktop, the iPod is recognized fine by my 5 year old laptop, which is running a simplified version Windows XP.  Halp.  I've tried everything on the iPod support pages regarding this issue, and would really like to avoid calling Apple about this.  Any suggestions?

    Try putting it is DFU mode:
    http://www.ijailbreak.com/apple_news/using-dfu-mode-to-fix-ipod-touch-and-iphone -errors/

  • Applications move between spaces when connecting/disconnecting second display

    During the day I'm constantly connecting/disconnecting/reconnecting my 2nd display to my Mac. When I do that a lot I see a few things happen:
    - Applications move to different spaces
    - One or two of my spaces dissappear
    Has anyone come across this issue before and is there any solutions or options I can try out.
    Many thanks!

    I just ran a hardware test (on ML you must hold down Option-D so it can access the hardware test bits via the 'net) and the test completed without finding any issues. I wonder if the issue has to do with switching between the integrated and discreet graphics.

  • Ipod just keeps connecting/disconnecting. any thoughts?

    here's the story. my ipod died. i upgraded to itunes 7. still was not working, i go to apple and get a refurbished one. the new one keeps connecting/disconnecting. when i open my computer, it shows it just blinking like its there, then its not. does not show in itunes, but half the time says do not disconnect.
    here's where it gets weird. the USB port runs other devices fine. i plugged my ipod into a friends PC and could put music on it. i plugged my friends ipod into my PC and it shows up fine. i've swapped the ipod USB cord with my friend and it still does the same thing. so its not the ipod, its not my comp. and its not my itunes. anyone even want to attempt? i'm at my wits end here.

    Try forcing the iPod into Disk Mode using the instructions in this Apple support document.
    Putting iPod into Disk Mode
    If you can successfully do that, it should keep the iPod mounted on your PC long enough for you to perform a restore of it via iTunes.
    Restoring iPod to factory settings
    B-rock

  • Dial-up connection disconnects when importing CDs into iTunes

    When importing a CD, my dial-up Internet connection disconnects after each song has finished importing. The importing doesn't seem to be affected, but I keep having to reconnect. This is very annoying!
    Has anyone else had this problem, and how can I fix it?

    This is also a known phenomenon on Macs with a dial-up connection.
    For Macs there is a workaround, but no solution yet.
    By using an Applescript, the firewall settings will be toggled on CD insert, preventing iTunes to contact Gracenote (to get track information).
    I don't know something similar for Windows.
    Maybe you can write some code yourself.
    The URL to block (temporary) is "http://service.gracenote.com"
    You can always get the track information later by selecting all tracks of an imported CD and choosing 'Get CD Track Names' from the Advanced menu in iTunes.
    M
    17' iMac fp 800 MHz 768 MB RAM   Mac OS X (10.4.6)   Several ext. HD (backup and data)

  • Dial-up connection disconnecting

    When importing a CD, my dial-up Internet connection disconnects after each song has finished importing. The importing doesn't seem to be affected, but I keep having to reconnect.
    Does anyone have any idea why this occurs?

    hi Michelle!
    where do I begin trying to find the culprit?
    actually, i just remembered seeing somewhere (i've lost the thread, though) someone reporting a problem with their internet connection that went away after they updated their
    b sound card drivers
    (of all things).
    so let's try working through this document on sound problems in itunes. let's try/check-on
    b everything
    there, and see if a sort of "audio spring clean" fixes both problems for you.
    (thinking here that since neither of us know
    b precisely
    what's going on, this can at least provide us with a structured place to start our investigations.)
    love, b

  • Dial-up connection disconnects

    dial-up connection disconnects after awhile

    Upgraded to Firefox 8.0 . . . dail-up lasting a bit longer, but still disconnects.
    It seems like nobody is able to help me.
    Perhaps the Firefox developers don't care about dial-up users.

  • Connectivity of nokia 6133

    I have 2 nokia 6133 phones one connects via usb cable the other connects then the phone shuts off and the connection is lost.  I noticed on the one that shuts off, when I go to select default ok it only gives me 3 choices --nokia, being one of them so I selected that one. Any suggestions? 

    Call you tell us all choices that both phones give you exactly as they appear on screen (in English please).

  • Firmware bug? No Connect/Disconnect button on "Manual" PPPoE option

    Hi,
    To the best of my knowledge this is a firmware bug.
    There is no Connect/Disconnect option when choosing "Manual" from the PPPoE settings.
    There are two related (unanswered) posts:
    http://discussions.apple.com/thread.jspa?messageID=8166971&#8166971
    http://discussions.apple.com/thread.jspa?messageID=8137893&#8137893
    Is there an official way to report such a bug?
    Does anybody have another solution?
    Thanks,
    Omri

    I reported the bug and got this response:
    This is a follow up to Bug ID# 6286922. After further investigation it has been determined that this is a known issue, which is currently being investigated by engineering. This issue has been filed in our bug database under the original Bug ID# 5847755. The original bug number being used to track this duplicate issue can be found in the State column, in this format: Duplicate/OrigBug#.

  • My Passport Essential constant connect disconnect on some windows 8.1 machines

    Hi All, I have a 500 GB My Passport Essential, it works fine on my win 7 laptop, and my win 8.1 laptop, but on my win 8.1 pc that I recently built it constantly connect and disconnects. I have tried disabling the hard drive sleep mode settings in power settings, tried using WD Drive Utilities on Win 7 but it wouldnt recognise the drive. Turning off the sleep mode settings did make it show up for a very short while, but after that it was back to connecting and disconnecting. The hdd light turns on, I can hear the drive spinning, and I can hear the connect/disconnect sounds from windows. Any ideas?

    Hi, welcome to the community.
    It seems might be a power issue or the USB port in the board. Have you tried using another port and another cable? Also making sure in the power settings that the USB are not set to be turned off.

  • Correct way to cleanup lccs state for Connect/Disconnect functionality

    I am trying to implement connect/disconnect functionality but I got some errors - when user connects to another room after disconnect different objects(for example AudioPublisher) may end up in incorrect state. Currently I perform following sequence of actions on disconnect: call stop method on  AudioPublisher, call close method on AudioPublisher, and then call close method on ConnectionSession. When I reconnect again AudioPublisher object in wrong states and throws different exceptions("Stream not found", "Stream already exists"). Can you recommend some approach to avoid these errors?
    Best Regards, Aleksey

    Hi Aleksey,
    Seems like using multiple connectsession (connecting to different rooms) is messing your app. We handle most of the clean up in the close & stop methods for AudioPublisher. If you are still facing issues can you share your code.
    Thanks
    Arun

  • How can i connect/disconnect PPPoe via Ethernet connected time capsule??

    I connected the time capsule with Ethernet.
    I set connect to PPPoe with "Manual" option.
    I could easily control "Connect/disconnect" pppoe using AIRPORT (in the menu bar). But I could not find a way to "Connect/disconnect" via ETHERNET. (No ETHERNET icon on menu bar anyway...)
    Could somebody help? THanks a lot.

    Have you consulted the printer's user manual for setting it up as an Ethernet printer? You will also need to delete your current printer in Print & Fax and when you Add the printer you will need to do so as an Ethernet printer. This means you will add it either as an IP printer using either LPR or IPP protocol - depends on what the printer supports. An Ethernet device requires an IP address that is either manually configured on the device or derived if the device supports DHCP. If the former then the IP address you configure for the printer must be within the range of IP addresses used by your router (typically 10.0.1.2-10.0.1.199 for an AEBS/TC.) This should be covered in the printer's user manual.

Maybe you are looking for

  • New ipod nano not recognized by itunes

    hi, okay today i got a new ipod nano, i plugged it into the computer and the computer recognized it but itunes didn't. I tried troubleshoot and reinstalling itunes and nothing. My ipod says connected but thats it and it freezes when i reconnected to

  • Cost center is not updating in IT 0001

    Dear Mates, I've uploaded two sets of data using PP02 T-code where one is Historical data & the other is Current data. Here for Current data I'm facing a Issue  where Cost center & org unit's data aren't getting updated in IT 0001 & its still showing

  • Error report from validation

    Hi, I used validation in the transformation and pointed to PASS and FAIL. The fail should generate an error report, but where will i find the error report? Is it in the management console? Appreciate your help. Thanks, Arun

  • Thunderbolt Software Update 1.2 update problem

    system hang after updating and after power off and on back. kernel panic and need to reinstall.

  • I want to scan a document to an e-mail how do I do this?

    I want to scan a document to an e-mail how do I do this?