Nokia 6151 Auto Off

I did update my nokia6151 to the latest version and still auto off. Do anybody could provide or help me to solve this problem....
Sincerely,
Christopher Cheah

17-Jul-200704:20 AM
chrischeah wrote:
Thanx for ur reply.
I don't what had happen to my NK6151 phone coz when I'm listening to music or whatever even check sms and etc.. it will automatically turn off. The phone was updated to newer flash version and the prob still happen. I send it to repair but they all don't know what's the prob too.. Hopefully u could help me to solve the prob.. Thanx again..
Sincerely,
Christopher Cheah
If is still happens after a firmware update and you haven't put any software back on the phone then this indicates a hardware fault and you should visit your local Nokia Service Centre for further assistance.
Regards,
Edward

Similar Messages

Nokia N900 auto off after 15 minutes

Nokia N900 auto off after 15 minutes. I am also reflash my mobile but problem is not solve please help me

More information..
Does it happen when it is plugged into a charger?
What is the battery level?
Are you using the battery that came with the phone?
Are you using a different battery?
Have you "over clocked"?
Does it power off when you are actively using the phone?
Does it power off only when the phone is idle and untouched?
What happens if you run this command in the terminal application?
cat /proc/bootreason

NOKIA N97 AUTO OFF ANG ON PROBLEM.

MY FONE AUTO OFF ANG ON I HAVE DONE ALL KIND OF REST BUT STILL SO PLZ HELP ME.
Solved!
Go to Solution.

First thing to try is a NEW SIM ..
Also check without the Memory Card to isolate the issue, if its due to some corrupted data. If you find MC to be the problem, back-up data for it onto your PC and Format the card ..

Problem with nokia 6151:help me!!!

hello,
i have a nokia 6151 and i have any problem....
-when the mobilephone is starting is very slow and the screen si light on only for five seconds and after is light off. this phone haven't OS and i don't know because it have need more time for to start;
-when i use phone in a call suddenly switch off...i don't know why...i buyed this phone only 5 mounths ago, and i don't use it more...
-when i find files in the gallery,i wait many time for to show this...i haven't many files in my gallery...
i change old software with new but the problems is the same.
Please, can someone help me?
tnx so much,
Simo

Please try using the phone without a Memory Card instered. If this solves the problem then you have got a bad memory card. I have had similar problem with a Nokia 6230i with a defective MMC card.
Experience and persistence are second to none just ask user one.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question...

Nokia 500 auto navigation will not work

I have a nokia 500 auto navigation and it will not show maps or it start to boot and freezup and will not work Help!

I had the same problem a couple of months after activating the gps.
I think my problem came up after I had loaded some songs and video onto the SD card.
I used the DVD to restore the maps etc. Be careful with that. The software to run the video/music is not included on the restore DVD.
I had to do the restore multiple times. Finally, I found an update on the Nokia website and did the update. DON'T DO THAT = my bluetooth has now stopped working. Bluetooth says it's on and you can turn it off, however, there's no change. It says on, but no devices can connect to the gps anymore.
Frustrated with Nokia? YES. I have had it sent back, but since I bought it on ebay, forget about that.

HP LaserJet M175nw - is "Auto-Off" *actually* compatible with wifi?

So my new printer was advertised as promised that I could "Achieve up to 50% energy savings, using an HP LaserJet with HP Auto-Off Technology which automatically senses your printing activity, turning your printer off when you don’t need it."
This sounds ideal - I print maybe once every 2-3 days at most. The printer could be in sleep mode for most of the time and surely save me loads of energy. Sadly, after a few days my printer stops accepting print jobs. It's still "on" (green power light) and the control panel on the unit can be accessed, however once going into this sleep mode wifi access is lost and nothing I can do will re-instate the wireless connection (i.e. it should show a steady blue light on the front and the IP address in the LCD screen). All I can do is turn the printer off and back on again then everything works as before.
I have:
Set a static IP address on the printer (and reserved this allocation via the router)
Updated to the latest firmware
Confirmed that wireless signal strength is healthy (not too weak, not too near the router)
Now upon reading a few troubleshooting tips (including here on the HP support site stickies) I read the suggestion of "Check that the printer’s “Auto-off” feature is disabled. If this feature is enabled, the printer will power OFF after some period of non-use."
This suggestion seems to indicate that infrequent wireless access and power-saving are mutually exclusive - is this true? Even if the print does indeed "power OFF after some period of non-use", surely waking it from this state (as distinct from completely rebooting the printer) should be sufficient to wake the printer?!
Can anyone confirm just how "supported"/compatible the power-saving and wifi features are on this model? What I'm asking it to do doesn't seem unreasonable - I'd expected some sort of "wake on LAN"-style behaviour...

Hi,
Please follow these given steps
press the tool icon on the display > System setup>Energy settings>Wake/Auto On Events>LAN Job> ON
or
press the tool icon on the display > System setup>Energy settings>Auto Power Down>Wake Event>LAN Job(put a check or select this)
Hope this helps
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Canon 6D display language resets to chinese after auto off and indicates card full

Just assembled my new 6D with 24-105 mm and display comes in urecognizable language, after changing into english it reminds me that unused new memory card is full, so I reformat and seems ok... BUT when starting after auto off again the same unrecognizable language and full card !
I have taken battery out and put in again, reset to default, changed card, and keeps doing the same.
Any suggestions ?

It could be the GPS in your camera IF you have been secretly kidnapped in your sleep, and placed somewhere in China, inside a cleverly detailed re-creation of your normal surroundings. The persons responsible thought of everything BUT the GPS in your camera sensing your true location and resetting the default menu language to Mandarin.
Investigate this, but very, very carefully.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!
Thank you very much for your help if any!!
This question was solved.
View Solution.

Quite a few questions there, Sends, but I will do what I can to answer them.
I would first recommend buying a router, even if it is one that you won't connect to the internet and network this with your other PCs and the printer. This will give you the best functionality and results for what you are attempting to do.
Additionally, the Auto Off feature of the printer can be disabled, and is not affected by the connection type. You can usually go through the Setup Menu and select Tools to change the options there on the energy saving features.
Lastly, the auto off feature on your computer is a Windows question, but an easy one to answer. If you are on a laptop you can right-click on the battery in the service tray (bottom right hand corner) and change the energy conservation settings.
You might be better off installing the printer through the USB cord and alternating that based on when you are using it, but that would be optimal only if you are printing only a few documents on an irregular basis. A networked connection is the easiest to manage over several computers, honesty, but you do have some requirements for that connection and limitations as well.
I hope this information is useful!

My nokia 6230 turns off without cause!?

my nokia keeps turning off,
i am reasonably sure it is not the battery as this problem occours while charging aswell as without charging. Also occasisonally, it doesn't turn off completely, just goes onto a white screen and can only be stopped my the removal of the battery.
Has anyone else had encountered a similar problem and can help me?
Thankyou

29-Aug-2008 07:31 AM
mccbleue wrote:
This is usually a software error that can be fixed by reinstalling the OS. You can't do this you_rself as this model is too old to be supported by the software updater, so you have to take it to a service point.
Definitely agree with this. Sometimes a slightly corrupt firmware might compromise the performance of the phone as a whole. But there is also a possibility that it's a hardware problem.
Good luck

Print jobs stuck in queue after printer goes auto off

Hi all!We have an HP LaserJet M125NW printer in the office, which is connected directly to the network (wired). The problem is, once the printer goes to "auto off" mode, the print jobs get stuck in the queue, and we need to restart the printer every time. After the restart, it works fine, until it goes auto off again. The device has a fix ip, and it can be seen on the network, everything sems okay, but it still doesn't print. I tried different computers, different operating systems, nothing works. Could anyone help me with this annoying situation?

, Welcome to the forums I read about the printing issue you're having with your LaserJet M125NW, that will not seem to wake up when you send the print job to be printed out. Below is what I would first suggest trying. Select Setup, System Setup, Energy Settings, Wake/Auto On Events, and in that menu, select "LAN Job" to see if this will help wake the printer up when you send it a print command. Also ensure you have the power to the unit plugged in directly to a wall outlet. Avoid power bars and surge protectors, which ensures the printer is receiving the full power it needs. Let me know what happens, good luck

Nokia 5530 Turns off when making a call

I have a real problem, my Nokia 5530 turns off if I try to make a call or receive one, the only way it will work is if the headset is pluggeed in, I have tried everything, Restoring Factory settings, Hard reset etc...
Anyone else have this problem? Help...
Cheers
Rob

I have exactly the same problem. I Went to a Nokia Care Point in Lisbon and they upgraded the firmware to the New one ( 11.0.054 ), but with no success.
I tried old SIM Cards, Newest SIM Cards, With / Without Memory Card, Factory Settings, nothing Worked. I Guess it´s probably hardware, maybe a faulty battery.
I ´ll have to send it to repairment..it´s really upsetting.
Message Edited by purex on 07-Oct-2009 11:26 PM

Connection problem of Nokia 6151 with Nokia Music

Hi,
I have a Nokia 6151 (RM-200), Firmwareversion 4.1.0 (which is the latest available), and the Nokia Music program (v. 1.3.20722.01). The USB connection cable type for connecting to my PC (Windows XP Home SP 2) is CA-53. In the past, when the music manager was integrated into the Nokia PC Suite, I had no problem with connecting the phone to the PC, and copying music to and from the mobile device. But since Nokia Music is a separate program, I am unable to connect the phone to it (note: this only refers to Nokia Music; the connection to Nokia PC Suite works fine). Whenever I try to connect, I get the error message that the device is connected in the wrong mode, and that I should select either "Media-Player", or "Printing & Media", or "Media-Data-Transfer" mode. But none of these modes is availableon my device. The modes actually available there are rather "Default Mode", "Printing", or "Data Storage".
Just as a further note: I have already un-installed the connectivity cable drivers, and re-installed the latest modules. To no avail. Can anything be done here? Is my device model (6151) at all suitable to be connected to Nokia Music?
Cheers
blueray
Solved!
Go to Solution.

I have contacted Nokia support directly, and I have been told than indeed the 6151 does not work with the newest version of Nokia Music. Only thing what helps is to re-install an older version of Nokia PC Suite, where Nokia Music is still integrated.
blueray

My iPhone 4 is going auto off and auto on. Could you please help on this please

my iPhone 4 is going auto off and auto on. Could you please help on this please

iOS 8.1.3 is the latest version. There's nothing to download.

Middle east maps for nokia 500 auto navigation

Dear Sir/Madam,
Thank you very much for your support, i would like if somebody can help me in my Device ( nokia 500 auto navigation ) i installed the Maps in my SD Card but once i put the SD card in my Device and checking the Mas its showing me the Maps is Locked ,
i would like to knowhow can i Unlock it .
Kindly if there is anybody can help me please Emails me
Thank you very much
Cheers .
Moderator note: Email address removed
Message Edited by prodigy on 01-Jan-2009 02:55 AM

I fully agree with your assessment. And I don't like to be treated like a monkey.
Nokia is showing such a low respect and care to their customers, especially in the Middle East. They became maybe too big to care for their customers. Apparently they have forgotten that what made them so big is precisely those customers they are ignoring today. It is a pity.
I am looking for a solution for the same problem since 9 month ow: updating middle east maps on my Nokia 500 Auto Navigation. thout any positive result.
What is making this case looking even worst is the promises I got from my Nokia reseller that maps WILL be updated on a regula basis!!! But till today, total blackout from our friends at Nokia.
And the funny thing : while typing this note, a popup appeared on my screen about Customer Feedback on the qualiity of Nokia support. They are really incredible those guys.

Z220 SCREEN/DISPLAY auto off

Good Day to all, I have already filed a ticket or issue to acer regarding this, but as much as possible I need an easy access response. The issue is about the phone automatically shut down, not the system/phone more like just the screen/display. And using power button to wake it up cannot solve the issue, so what I did was that I removed and re-insert the battery to restart it. However, it took me several times before i was able to make it stop and I could not even make it to home screen to settings. When I was able to make it through the settings, I hastely factory resetted it. But it did not fix the issue since I was able to experience it again and again. Another one, is that it seems the display can't be viewed in every sides or angles coz it seems the color or the screen itself changes like it was struck by sunlight or by a bright light that I could not clearly see the display, in every case or situation, daytime and nighttime. I dont know if this is a hardware error or if this is normal based on the priced that I paid for it. Because I haven't experienced it ever in my years of using and observing my phones and my friend's phone. This Z220, lollipop 5.0, price is just less than the $100 or to be exact, PHP 2990.00 and this made me decide to buy this one, and it's been only a week since I bought it last July 26, 2015. Maybe this is what they say, "you get what you paid for. " I hope I could get a response as soon as possible. And I will be able to pull this one off. Thanks and Godspeed!

Update! Good day to all, One of the support agent called me earlier again regarding my issue and suggested to go back and check for a replacement in the store where I bought this one. And that, I was able to received a new one and to see if it has the same issue regarding the view angle, and to my expectations, it still has the same view angle issue because of the material used for this cheap Z220. Which is TFT capacitive touch, a display specs or hardware part. Though it was not indicated that it is a TFT but based on what I have read about different kinds/types of display, it is more likely a TFT display issue, wherein it has a view angle issue or limited view angle but a cheap one that is widely use for budget phones. Regarding the first issue, I do hope with this new replacement, I will not be able to experience it again. Since this could not be fix by some techies for now. And I hope I will be able to continue using this for years to come as I'm the type of person who values everything even if it is a cheap one. Hence, the auto off of the screen/display is still unsolved but I think I could not expect more response regarding this. Thanks IronFly for the response. Godbless to all.

Nokia 6151 Auto Off

Similar Messages

Maybe you are looking for