Nokia 6220c-1 V 5.15 Tv-out (Audio + Video) no sig...

Nokia 6220c-1 V 5.15 Tv-out (Audio + Video) no signal
Help me!

If you are not editing HD, so S-Video is good enough, you can use the DVI to video adapter
<http://store.apple.com/us/product/M9267G/A?fnode=home/shopmac/macaccessories/displays&mco=MTI1NzE>
The ATI graphics card has two DVI ports, but the adapter will only work on one of them. If it doesn't work, try the other DVI port.

Similar Messages

Nokia 6220c firmware v5.15

I have a nokia 6220c and a su-33w tv receiver,since i updated my firmware to v5.15 ,i am unable to watch mobile tv on my tv screen via tv out cable. If i reinstall the firmware,will it fix it? I have formatted,hard resset and factory default and still same problem. A key with a slash in front of my tv but it stil shows well on phone.pls help

to know if there's updates for your phone or not , u must know your product code
The code is printed on the white label beneath the battery (e.g. CODE: 0520001).
you can check for it at :
http://mea.nokia.com/support/download-software/device-software-update/can-i-update
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Nokia 6220c power button not responding

Hi,
I have a Nokia 6220c that i have used for abuot 6 months, since then i have upgraded to a newer n82. However having a look back at the 6220c before giving it to my brother, i realised that the power button does not respond.
I know there has been a history with this phone and a stiff power button, so i removed the silver outlining and attempting to press the button with my fingernail and still no success.
The phone charges fine and the screen goes on when the charger is plugged and when any button is pressed (except the power button), however it's just the plainwhite screen with the battery in the top right.
Anyways is there any way i can get the phone on or any other methods i should try, has this happened to anyone or is there a way i could change firmware to maybe the red button? If theres no solution I will have to send this back to Nokia which will be a massive hassle.
Any help will be appreciated. Thanks

Not sure but try this before going to Nokia Care.
.After taking a backup of all you images & videos (i'm assuming you've turned the sync on with skydrive for settings & other data) & keeping a list of all your apps, Reset he phone. If this does not work then only solution will be Nokia Care Centre.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Windows live fail to install in nokia 6220c

Dear experts! I'm really facing problem in installing windows live on my nokia 6220c as it keeps appear error saying installation fail. Even i've restore to factory setting and reset the phone, the problem still persist. Have been searching through the net for solution still can't find solution to it. Pls reply. Thanks

Hi,
to see the cause of Windows 8 update failures, we must look for error messages in the following log files:
Please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files to your document folder, also copy the setupapi.dev.log from the folder C:\Windows\Inf, the "C:\Windows\WindowsUpdate.log" and the file "C:\Windows\winsxs\poqexec.log"
to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to your SkyDrive [1] and post a link here.
André
[1] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
"A programmer is just a tool which converts caffeine into code"

Problem with nokia 6220c

Greetings to all! I from Russia. Therefore at me bad English. I have nokia 6220c. At it buttons "1,4,7, *,>, <badly function, ok", in other words work when will want, when I have removed buttons and have started to press a straight line they have earned!!! And after a while... 5 minutes or 5 hours (has not found dependence) they do not work again

Please make sure that you have the latest software version.
If so, try to back up you data and try a master reset on you phone by doing *#7370#. If problem presists, have you phone check by your nearest nokia center.
I hope this works. Please click the green star if you find this reply helpful.

Nokia 6220c (classic) PROBLEM - up/down/select but...

Hello - I have a Nokia 6220c.
The up/down/centre select buttons have become non functional. The phone was fine, but the problem came gradually over time. Push it now and nothing happens.
The buttons do seem to work occasionally when I concurrently hold down the very bottom edge of the keypad, but otherwise the phone is useless.
Unfortunately this (expensive) phone was purchased more than a year ago so the warranty no longer applies. Nokia told me that I will have to send it off to the repair centre at my cost and have them evaluate the phone and only then can I get an estimate for repairing the phone.
I came across some posts online saying people experienced this. Has anyone else? Will simply getting a new keypad fix the problem?
Thanks!
Message Edited by robarakira on 29-May-2009 08:20 AM

I have my Nokia 6220c for more than a year now and I'm not experiencing any problem with it aside from the quality of the material it was made, since the external silver ligning is kind of loose from the day I got it but I didn't really mind that for I know I can make use of the phone for a lot. And believe me fellas, I've been using it for extreme texting in the outdoor plus almost 24hours of internet usage within less than a year before.
About your problem, you may do *#7370# to do a master reset on the phone. If that won't work, you may always go to your nearest Nokia Care center and have checked for there might be water corrosion inside.
I really love the phone, much more if it has wifi =)

Nokia 6220c does not go on standby

Hi folks,
i just upgraded the firmware on my nokia 6220c from ver. 3.23 to ver. 5.15. However, after this upgrade, the phone no longer goes on active standby.
Solved!
Go to Solution.

You mean active standby screen (with all the shortcuts) is not onscreen anymore? try reactivating it. Its somewhere in the Tools>Settings menu. AFAIk the default settings is that its turned off, and the update may have reverted you to default settings.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

GPS Nokia 6220c

Hi
I'm Vietnamese, I'm using Nokia 6220c which was bought last month.
When I buy it, its ver is 4.13, but I upgraded to 5.15 arcoding to recommend of Nokia Software Update in CD. When updating is completed and using GPS, the icon Satelline (in the right-up corner of display) doesn't appear however the GPS light in left edge still works and GPS program operates normally. How can I solver this problem?

Check your 6220c settings. You should have checked as on "use A-GPS or Assisted GPS". You should find this settings from somewhere settings and under locating or location or something similar like that. If not check also Connections part. Hope this was helpfull
Me, Mac and my misengineered N97

Nokia 6220c keypad

hi i have an nokia 6220c and the buttons on the phone are fallin off is it under warrenty for that it is a shame it is a good phone

Hi Sohaib_awan,
Have you updated your phone to the latest firmware available for your device? To do so, check for updates in either Nokia Suite or on your phone itself. Also try restoring the phone to factory settings after performing the update. If either of these still do not work, then it may be a hardware problem, and you will need to take your phone to your local Nokia Care point for them to investigate.
latest version of Nokia Suite: http://nokia.com/nokiasuite
to locate your nearest Nokia Care: http://nokia.com/support
Let us know how you get on.

Confirm on - Scratch-resistant glass, oleophobic coating,Adobe Flash HTML,Radio Stereo FM,Java MIDP emulator,Scratch-resistant glass back panel,Audio/video player and editor,TV Out,Document editor (Word, Excel, PowerPoint, PDF)

Kindly confirm on the following features of Iphone 4s..and advice me accordingly.
Confirm on - Scratch-resistant glass, oleophobic coating,Adobe Flash HTML,Radio Stereo FM,Java MIDP emulator,Scratch-resistant glass back panel,Audio/video player and editor,TV Out,Document editor (Word, Excel, PowerPoint, PDF)

You can easily compare any Nokia devices using the web sites, here is a comparison of the N8 from the Nokia UK site:
http://www.nokia.co.uk/gb-en/products/compare/?action=productcompareaction&site=64060&products=23301...
And similar from Nokia Developer:
http://www.developer.nokia.com/Devices/Device_specifications/Comparison.xhtml?dev=Lumia_800,N8-00
Some information may be incomplete at present, since some device details were kept secret until the final moment of the launch so the pages have been prepared withoug all of the data.
Nokia Maps is available for Windows Phone at launch.
Multi-Touch(TM) is the registered trademark of another company, however Windows Phone does feature the common touch features such as swiping, pinch-zooming and so on.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Delete partially copied movie file from iPhone. Shows grayed out in Videos on the iPhone but it doesn't show up in iTunes.

Hello.
I have synced my iPhone 4S with iTunes and I got an error while copying one movie. Now this movie shows up grayed out in videos on the iPhone but NOT in iTunes. Hence, I cannot delete this partially copied movie from my iPhone. And since it is grayed out, the right-to-left swipe does not work. I have resynced with "no movies" option so that every movie would be deleted and indeed every movie was deleted except for the problematic one. I rebooted the iPhone several times in case it was a glitch. No success. I even tried tools like iExplorer and DiskAid but I cannot find this **** file. Is there any way to delete this partially copied file from the iPhone without having to restore it?
Regards,
HawkeyeQ

Hi adtsalmon,
You can only watch the movie on the device you rented it on. Here's a snippet from the Apple Support site (italics mine):
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
Here's the link to the Movie Rentals FAQs site FYI:
http://support.apple.com/kb/HT1657
Hope this helps!
Cheers,
GB

How do I fade out audio in Premiere Elements 13?

HOW DO I FADE OUT AUDIO IN PREMIERE ELEMENTS 13?

ATR
Thanks for answering,
im moving slowely forward in speeding up making presentations by using the new discovered smart tricks or functions.
So you understand my level of expertise:
This step by step production methode im using now give's me controle without the (full) knowledge of all the (smart)functions in this program.and slowely learning the way arround.
starting a project: a mix of photo's and avi's, starting with manual time line filling with the selected files then the timesaving "Standard crosover on all selected".
second: placing a header with the titel at the front and a ending a the end. (cut al the wrong or bad pieces and extend some photo viewingtime if needed.)
And then adding subtitels/tekst and use some other crosovers to highlight the change of subject or stills to movie.
And at last: placing the background music on "soundtrack": after some fiddeling around ive choose to cut the musictrack between the avi's instead of let the music play all the time and adjust the volume down to zero when a avi is playing.
this have two advantages:
1) the songs can be streched by by cut and jumping to the end of the avi soundtrack. (no loss of music through fading out and still let it play so need less musicsongs.)
2) And the rightclick fade function with the standaard fadingtime => "fade out" and "fade in" is easly to use because of the end track avi and begin track music timeline. (And if needed lowering the fading slope/ extend the fading time by moving the "points" on the audio line)
But; its a lot of work and after the first run through the presentation(or watching on TV) and there is a adjustment needed (fadingtime, volume-changes) you have to adjust every bit of the soundtrack. (keeping the volume "feeling" the same is the difficult part.)
I will read about the Smart Mix function and test it on a other project. see of its fits my kind of using and expertise. (every automatic (smart) function needs understanding of its purpes and limitations and there are a lot of them in premiere
What is in your opinion the most effective way of adjusting volume of audio parts across the hole project so its merged in to one audio/soundlevel?
(and offcourse in the hole way of building the presentation.)

Greyed out audio and no battery detected

I have had a problem with my mabook pro since the last set of updates, I can't remeber which ones, however I now have greyed out audio and no battery dected.
I am pretty sure its a firmware problem, however any firmware I attempt to install I Recieve the follow error "This software is not compatable with your system" - I am at a total loss. All I need to do is force a firmware install on this thing and then I will be happy?
Any suggestions???

I would first try resetting the SMC http://support.apple.com/kb/ht3964
If no change and you are convinced it is Firmare I would advise taking it in for Genius support over the counter.
Genius reservation http://www.apple.com/retail/geniusbar/
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

Unlink Audio & Video greyed out in Premeire Elements 13 (Windows 8.1) [new user]

I posted (or at least I thought the post worked) this question Mar.27th but I can't find it or any replies I may have gotten so if anyone knows its whereabouts I'd appreciate you're telling me how to see it so I won't have 2 threads running for the same question. My question is: why is the option to unlink the audio and video tracks greyed out when I'm trying to substitute part of an audio clip (without ruining the synchronization between the existing audio and video). I'm working with a saved "projectX.prel" file. I noticed when I opened a new project that the UNLINK option is active. This seems contrary to logic i.e wouldn't the unlink action be more likely to be needed when working on an existing file as opposed to when working on a brand new file? How can I separate the 2 components (audio & video) so I can edit just the audio clip without the UNLINK procedure working? Would really appreciate any help anyone can offer with any of the foregoing. Thanks.

garryw
Thanks for the reply. Glad that suggestion C worked for you.
Is there any remote possibility that the video and audio are really unlinked to start.
Let us take suggestion A, you say that Link Audio and Video is active choice for what you believe to a linked video audio on the Timeline.
You have your clip in the Expert workspace and the clip is not selected as represented in screenshot 1.
If you click on the Video 1 portion of the clip, does the video portion and audio portion highlight to look like what you see in screenshot 2
where the video and audio portion both look highlighted.
Or, if you click on the Video 1 portion of the clip, is it just the video portion that looks highlighted and the audio part
continues to look unhighlighted? As seen in the next screenshot 3?
Depending on your answers, we may next delete the Adobe Premiere Elements Prefs file which can be found
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
13.0
and in the 13.0 Folder is the Adobe Premiere Elements Prefs file which you delete. If that does not work, then delete the whole 13.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives enabled so that you can see the complete path given.
As your schedule permits, looking forward to learning of your progress.
Thanks.
ATR

Playing out to video monitor

Hi. I'm running FCP 4.5HD, and currently using dual Apple Cinema Displays. I use 2 Sony HDV decks, which connect to a Panasonic HDTV as my video monitor. When I capture or when I mix down to video or tape, the video plays on both the HDTV and on my displays. However, I am not getting a signal through the deck to the HDTV when playing clips or sequences within FCP. I have my video out set to Apple Firewire.
How can I get the video to playout to the deck and monitor all the time?
Thanks,
Cesare

If it is all DV, then...
#8 External Monitor Viewing.
Shane's Stock Answer #8: External Monitor Viewing
If you are working with DV, this is simple. First connect your computer to a camera or deck via firewire, Then connect the camera/deck to your TV/monitor via RCA or S-Video.
Then start up your camera and TV, then open FCP.
Go to the View Menu, choose > External Video > All Frames
VIEW>Video Playback should be “Apple Firewire NTSC” (If you are using an NTSC set)
VIEW>Audio playback should be “Audio follows Video”
Technically, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the A/V DEVICES tab.
If you are working with HDV footage, FCP 6 allows you to view this via firewire, but ONLY as downconverted DV. It won't look the best, but you can see it. To do this,
If you need to view any format other than DV at full resolution, then you need to look into capture cards. Several standard definition and high definition models are available from www.aja.com and www.decklink.com. With these options you'll need a proper monitor to view full broadcast colors, but all models allow for realtime standard definition downconvert, allowing you to view HD on an SD monitor.
The Matrox MXO is another option that is output only, but allows you to view your footage on an Apple Cinema Display at full broadcast quality.
Shane

Nokia 6220c-1 V 5.15 Tv-out (Audio + Video) no sig...

Similar Messages

Maybe you are looking for