NOKIA 6230 ,DKU-2 ,running on windows 98SE says no...

Hello ,i am running on HP ,windows 98SE ,i have a 6230 phone and i have a PC suite CD ROM that came with the phone.
It says on the disc ( supports 98SE ) but when i try to install the PC suite it give err message :
this operating system is not supported ,installation will not continue ,please refer to nokia PC suite quick guide for supported operating systems.
I looked on nokia site for anything that says 98SE supported but cannot find anything less than 2000 as a supporting system.
Any idea's or answers ? i am confused by the contradicting info.

Hi jago25_98
Are you using PC Suite 5.8 available from:
http://europe.nokia.com/A4144016
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

What is the minimum version of Windows supported by Firefox 3.0 or 4.0? I am running Windows 98SE.

I don't want to try installing Firefox 3.17 or 4.01 if they don't support Windows 98SE. I can't seem to find any minimum system requirements for these newer versions.

* http://www.mozilla.com/firefox/4.0/system-requirements/
* http://www.mozilla.com/firefox/3.6/system-requirements/
* http://www.mozilla.com/firefox/3.5/system-requirements/
* http://www.mozilla.com/firefox/2.0/system-requirements/

Why don't I have enough memory on Nokia 6230?

Hi: I have a Nokia 6230 and sync it regularly with my computer. I have about 700 contacts and sync a relatively full calendar from one week ago to two weeks in advance. A to-do list also synchronizes. I regularly get the following error on my computer: [Nokia 6230] The phone calendar is full. Please delete some calendar events on your phone or change the filtering options and synchronize again. And, I regularly get a "to-do memory full" error on my phone. However, the memory status on my phone says: Phone: Free memory 6.1 MB Used memory 1.2 MB Memory card: Free memory 24.5 MB Used memory 5.9 MB Size 30.2 MB As you can see, both memories are only partially used yet I get constant errors regarding lack of memory. Contacts settings are set to use "Phone and SIM". Memory Status for Contacts reads Phone: 30% free, 70% used, SIM Card 250 free, 0 in use. How can I use the phone's memory more efficiently? Thanks,

Yes, Charlie is right. With any OS, the listed minimum RAM is always enough to just barely run it. In practice, this is rarely ever enough, because as soon as you add the demands of software etc it can't keep up. I am impressed you can manage at all, quite honestly. (Smiles)
What really impresses me, however, is that someone was actually selling computers with 1G of RAM 2 years ago. Four years ago I bought a cheapish Windows laptop, and the choice was btwn 2 or 4G. I have since worn it out (did I mention cheap?), and have inherited a four year old MacBook Pro. It came stock with 2G, so I upped it to 4G. It walks like my grannie, and I do all my 'real' work on an iMAC with 16G. Most people these days buy 8G.
The problem you may have with upgrading is that your board is probably old, too. If you do purchase a new one, ask around in here regarding specs.. and don't buy one from the person who sold you that one! (chuckles)
~The other, cuter Charlie.. Chuckles

PC Suite 6.85.12.0 with a Nokia 6230 Doesn't Sync ...

My phone is a Nokia 6230.
My computer is an IBM/Lenovo Thinkpad T42 running Windows XP Professional SP2.
I'm using a Bluetooth connection to synchronize the phone with Outlook.
The system info is:
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.84.10.3
Language: English
Connectivity Cable Drivers:
Version 6.84.4.0
PC Connectivity Solution:
Version 7.22.7.1
Microsoft Outlook:
Version 11.0
Build 8169
Bluetooth stack:
Microsoft Bluetooth stack
Version 5.1.2600
Build 2180
Yesterday I received the message informing me that there was an upgrade available to PC Suite 6.85.12.0. I've had no real problems with 6.84.10.3 but it has a few quirks:
When I synchronize PCS 6.84 with Outlook I have to do it twice. The first time I get a message "Connected to (computer)" on the phone display. The synchronization then ends with a warning message in the last report
PC Sync information.
The mobile phone has not responded.
Possible Solution
Please ensure your phone is in the standby mode, then restart the Synchronization.
If I sync again within a minute the synchronization succeeds. After a minute of no activity the phone displays a message "Disconnected from (computer)" and I am back in the original state.
I can live with this. I just have to hit "Synchronize now" twice about five seconds apart.
The second problem I had was with transferring a largish music file (6 Mbytes) to the phone. I tried several times and it got truncated but I got enough of it (a minute's worth) to be a useful ringtone so I left it at that.
I thought I'd give PCS 6.85 a try and see if a release that promises stability fixes would clear up these quirks. What I ended up with is a release that wouldn't synchronize at all. Every time I tried to synchronize it failed. I would get the "Connected to (computer)" message on the phone follwed about one second later by "Disconnected from (computer)" and the same warning as shown above in the report log.
I then tried to back out to PCS 6.84.10.3. This version, and an older one as well wouldn't work now either. It took me many hours of hair pulling, head scratching, Googling, and experimentation to get back to the version and behavior I had started out with.
Since I didn't see this procedure stated explicitly anywhere let me describe the steps it took.
1) From the control panel remove PC Suite.
2) From the Control Panel remove Cable Connectivity Drivers.
At this point I thought I could just install an older version but the older versions didn't work now either. I then read about PCS Cleaner. So I downloaded that (version 3.6) and tried to run it and got the rather confusing message:
"PC Suite Cleaner does not support this version of Nokia PC Connectivity Solution (version number). Please contact Nokia support."
I then tried manually cleaning PCS files and registry but I only made things worse. Finally after many futile attempts it dawned on me that the above message meant "First remove PC Connectivity Solution" so:
3) From the control panel remove PC Connectivity solution.
4) Now PCS Cleaner 3.6 agreed to launch and I was able to scrub the machine.
5) Finally I could reinstall PC Suite. Reinstalling PC Suite 6.85.12.0 gave me the same no synchronization problem. Repeating the whole procedure with PCS 6.84.10.3 brought my system back to its original state.
I have since again received theadvisory message that a new version of PC Suite is available. Needless to say I am now studiously ignoring it. I do not have the time or patience to work on this again until someone offers a workaround/fix for this problem.
Any ideas?
Sam Gamoran
NDS Technologies Israel

SOLUTION AT LAST!! (as dumb as it may be)
-- This posts refers to an older version of PC Suite than mine, but I suspect the situation (and the problem) is very similar.
Hey everyone!
It's been hours of forum searching and reading million of suggestions how to make my 6230 sync with the *several* latest versions of Nokia PC Suite (HELLO! NOKIA ARCHITECHTS! You have some serious recurring problem here! Don't abandon the veterans in your client base, it reflects really bad on you service-wise! At least post an official message that you acknowledge the problem and that you're working on it!)
Seems that tons of people encountered my exact problem:
Connection works, pairing works, file copying works, synchronisation doesn't work.
Well, the forums mentioned that the older older versions of PC Suite had a very quick timeout problem, so one had to synchronise twice, fast, in order for sync to succeed.
Now, it seemed like the timeout was reduced to almost "0", and disconnection immediately followed connection.
So, even though I did not see any second confirmation message (normally the phone shows a request to "connect" and then a second request to "transfer data" ) - I thought maybe it was there only disappearing very fast. So I decided to simply click twice fast, and I mean REALLY FAST, on the main button to accept, hoping that the connection will be kept. And VOILA! The connection was kept, and the sync was successful.
I know it's not a permanent solution, but for me, for now, considering how hard (why is it hard, Nokia??) and annoying it is to revert to a much older version of PC Suite - it's at least a temporary solution that works. And the only one I've found so far.
================================
Specifications:
Phone: Nokia 6230
Firmware: 04.44, 21-09-04
PC Suite: 6.86.9.0
MS Windows: XP SP2
MS Outlook: 2003 SP3
================================
I wonder if that would work for everyone.
If so please spread the word, seems that lots of people would like to know that. At least until a decent fix will be released for the PC Suite, that is.
Cheers,
Ohad

6230 DKU-2 - "No phone connected"

I'm using Nokia PC Suite 5 for the first time but my PC doesn't seem to connect to the phone.
Here's my setup:
Nokia 6230
Windows XP Home
DKU-2 cable
I downloaded and installed the cable driver [nokia_connectivity_cable_driver_rel_6_81_1_eng.msi], then installed the Nokia PC Suite as supplied on CD. I now have a Nokia Phone Browser on my Desktop, a Nokia PC Suite icon in the System Tray and lots of shortcuts in my Programs folder.
Plugging in the DKU-2 cable to a USB port, then attaching my 6230 caused a 'new hardware detected' icon to appear in the System Tray. After a minute or so the messages stopped, one of which seemed to indicate that it had found a generic Nokia USB driver. Plugging in the USB cable results in the usual 'bing-bong' and the 6230 screen says, "Data enhancement connected". So far, so good.
Double-clicking the PC Suite Icon reveals a Nokia Connection Manager wizard, with four buttons. I click the 4th button (USB connection) and wait, but nothing happens. The message says, "No phone connected".
What have I done wrong/do I do to fix this please?

06-Apr-200712:52 PM
my_6131 wrote:
Can you post the link to the software update please?
Try this link for Version 6.83 of the PC Suite:
http://europe.nokia.com/A4144903

How can i transfer files and applications from an old windows 98SE OS?

Recently, i was surprised with a brand spanking new 15.4" 2.2 GHZ intel core 2 macbook pro. before this awesome new notebook, i was using a very old, arthritic windows 98SE OS and everything in my whole computing life is stored on that old win98SE antique! i would like to know how i can transfer all my music, movies, pictures and applications, including windows 98se itself so i can possibly run them using parallels or bootcamp (ie: my paintshop pro 7 & 9, animation shop, icewindale games, plus other windows based programs i already have.) i have a male to b male usb cable, if that might help me transfer, i do not know. i also have many many cd-r's, if is this the only way to transfer my files, i am going to be burning disks forever & ever! :P can anyone help me out and suggest a way i can have all my stuff on this awesome new macbook pro? Thanks so much! ^_^

Since its running 98se, i'd say it would have USB 1.1.. which is slow. so if you have a spare ethernet cable which i think is a lot faster than USB, you can set up a network via ethernet and send to the mac that way. If you turn all your sharing preferences on windows 98 (i forgot how to, because its such a long time since i used it) you can access every folder from your mac. But yeah there isnt a lot of ways to transfer quickly on something that old.

Best way to migrate existing XP SP3 partition to a virtual machine to run via Windows 8.1 as physical partition and not a vhd?

Hi I have a current XP SP3 setup have been using in a dual boot with Windows 8.1(on separate partitions on different hard drives - I think these are SATA drives) but now am thinking of migrating my XP partition preferably as a live virtual machine
to be run as a guest via Windows 8.1 as host so I don't have to do the rebooting. Also prefer this to making a VHD of my XP so can use the existing partition allocated for it rather than taking up extra space as VHD on my windows 8 (and don't want yet
to replace my xp dual boot in case it does not work so well as vhd, as I have a lot of old educational programs my kids still use on it that I don't really want to put onto my W8.1). Will also save time if I don't have to convert it to VHD first. I
also do not want to reinstall a new XP Sp3 virtual machine from scratch for same reason - will take too long to resetup -just use existing as is.
I have used VMWare player and Virtual Box in past with an old 98SE system as a virtual VHD/VPC file but VMWare workstation is paid which may be the one I need to use a physical partition but I prefer to try freeware options first.
Will Hyper-V in Windows 8.1 (I have retail PRO version of both my XP and Windows 8.1) be able to do the same as VMWare workstation? OR is there another option to run the physical XP?
The other thing with my XP setup is that the user profiles that people login with are located on a different partition E (80GB) to my XP which is on J (100GB) and most of the programs for it run from partition D (over 120GB) and the XP boot loader resides
on a partition C (2GB) (which is not the Windows8.1 partition which becomes C only when it boots, but this C drive for XP may also be having the Windows 8 boot loader and files for that -using EasyBCD to handle boot menu of W7 type boot loader).
So I need a system that can mount these other physical partitions also alongside with my XP partition when it boots up.
So what are my options for running this XP SP3 setup via Windows 8 as a guest operating system?
Also will doing this be likely to require reactivation of my existing windows XP (retail) which means I cannot then use it again if I go back to the XP dual boot at times or in case the VM setup does not work?
Also do I need to change my XP first so that it boots off its own drive rather than the C partition - and how do I set this up then using EasyBCD or windows boot repair?

HI I found I had to make physical disk offline to use in Hyper-V which I cannot do and do not want to do with all partitions - cannot choose just ones want.
So now am trying to make VM of my physical XP -and other partitions neeeded but D partition is over 127Gb so cannot use Disk2VHD.
Here is what am trying now - any other suggestions for alternate software to vmware convertor/disk2VHD maybe to do partitions over 127GB? I have posted also at VMware forums but no answer as yet.
Advice on doing a physical XPSP3 conversion to a VM for Virtual box and hyper-v ultimately
Hi I need advice as to best way to convert an existing XP Sp3 install on a physical hard drive along with other related partitions to a Virtual box VM image with aim to convert that VM image to a Hyper-V VM for use with Windows 8.1 host.
I have several C (boot ini partition), D programs, E Data, etc partitions and a current dual boot with an extra XP install I use as a backup system.
My main XP is on J drive and other XP on I drive with C drive boot ini that switches btw 2 with J set as default.
I have a D partition that is over 127 Gb so cannot use Disk2VHD which would have been easier, and it seems there is not a way to make a direct Hyper-V VM from converter but only Vmware VM?
I do not have or want to purchase as yet VMware Workstation as have W8.1 Pro that can use Hyper-V to run my XP SP3.
I seem to also have an issue with COM+ corrupted on my machine XP J drive ( It tried to reinstall the COM+ but my es.dll file won't register and I did get a failed conversion with converter when tried earlier at 94% saying VSS snapshots have
reached their limit). I think this is related to my COM+ issue which I am not sure now how to fix apart from repair install of my Xp (as I have tried repairing COM with various articles searched on google to no avail) which I may do first before
retry conversion. However my ALT XP on I drive seems to be fine with being able to browse the COM+ applications ok. SO maybe I can use that instead but it is the J drive XP I want the most (not sure if will work at reboot if I do not
hot clone it?)
I have read also the manual for converter 5.5.1 ver standalone and am not sure of a few things so if someone can guide me it would be very much appreciated.
First of all which version VM should I make image of if I later want to convert it to a Hyper-V VM image (I only have free Virtual Box latest ver, VMware Player and Hyper-V on Windows 8.1 PRo) ie: VMware workstation 10 or Vmware Player 6 or lower
ver or other? OR is there another software I should install for the conversion or later conversion to Hyper-V? I prefer to use Hyper-V over Virtual Box and Vmware Player if possible, but should these others work just as well for my Xp Sp3 existing
system as a VM in Windows 8.1? Please advise which you think is best of these?
Should I leave all configuration options off while converting and even XP licence, workgroup etc or is it most likely that I will have to reactivate my XP (retail ver) once I reboot in the VM although I am putting to run on Windows 8.1 host on exact same
hardware as my current XP in dual boot (replacing my physical copies which I don't intend to use after conversion)? Can I enter licence etc later as well?
I currently have 8 GB ram total -should I leave Xp one at max it suggests of around 3Gb ram?
I have Quad core processor -but should I make Xp Vm one dual core for when it runs on W8.1 host to allow the host some processors so can run at same time or leaving my Xp at quad core will be ok?
Network - I want to use host one as I read it is safer for obsolete XP so do I set that at start or is it better to change this later too -allowing xp to have own internet access (maybe as may need to reactivate also - don't want to call Microsoft
if can avoid it)?
If I just want to convert resulting VM to Hyper-V VM -which software to use after for this that is freeware (Virtual Box or VMware Player or Hyper-V -not sure which can do it) and do I not then install Vmware tools?
SYSPprep should I do anyway regardless of what target VM will be when configuring later, even if on same hardware machine? OR can I just boot Vm and see if boots ok first?
Anything else I should set specifically for this future use of the VM image in hyper-v?
AU

Nokia software updater does not recognize Windows ...

I tried to install nokia software updater to my pc,WIN7 ultimate,and installation cannot begin,because its does not recognize OS.

Taugis,
If the method as described by Rider5512 does not prove to be the solution you require, Microsoft does have an official Windows 7 Support Forum located here http://tinyurl.com/9fhdl5 . It is supported by product specialists as well as engineers and support teams. You may want to also check the threads available there for additional assistance and feedback.
Also to get your questions answered on the most common challenges around application compatibility when coming from a legacy operating system, why changes were made along the way, compatibility technologies inside the OS and methods for getting incompatible applications to run on Windows 7, please go here: http://tinyurl.com/yfa2yyz
Jessica
Microsoft Windows Client Team

Connect ibook to nokia 6230

I can connect my mobile phone (Nokia 6230) to my computer but when somebody calls me, the window doesn't appears. Why? What can I do?
Thank you.

Accept the phone call on your mobile phone just kidding.
I am unsure if the Nokia 6230 is supported by the Apple Address Book. Either try another user for which it works, patch the Apple Address Book yourself or go for BluePhoneElite.

PC Suite 6.8 - Nokia 6230 - Connects ok but no Syn...

Hi.
Finally got 6.8 to install on my Windows Xp SP2 machine.
Had the previous version installed and working ok. Had to uninstall/reinstall several times and use many of the fixes listed on this site to finally get 6.8 installed.
Phone connects via bluetooth ok and I can see files on the phone and transfer them back and forth.
PC Suite main window shows Nokia 6230 connected via Bluetooth.
Select synchronize. PC Sync window opens with Not Connected shown at the top of the form. The Synchronise Now and Settings buttons are greyed out. If I push Select Phone nothing happens.
Anyone any idea what the problem is ?

02-May-2006
04:44 AM
manta wrote:
If you open File Manager in PC Suite and locate your phone at the left panel (you must have folders view in Windows Explorer), scroll to contacts folder under the phone, select update button phone with arrow in the upper area of the file manager window, do you get your contacts updated to PC from the phone ?
Just asking this question to narrow down the problem causes, if you get the contact to File Manager/Nokia Phone Browser, your syncronisation with the phone is propably OK, but the PC Sync application is stuck.
Another thing that may help PC Sync to realise the phone is connected is to open manage connections and untick the bluetooth option and then tick it back.
The is also a separate exit option in PC Sync, if you locate the jingjang symbol from Windows tray(bottom right of your screen)right click the icon you can see exit. Choose that and then reopen PC Sync from PC Suite main view.
OK, opend file manager from PC Suite.
The folder structure I see is
My Bluetooth places->Entire Blutooth Neighborhood->Nokia 6230->
The only subfolder from this level is OBEX file transfer and below that are graphics,Images,Memory Card, Music files,Recordings,Tones,Video Clips
I don't see any contacts folder.
I can go into the memory card folder, see my music tracks and transfer them back and forth.
Tried unticking/ticking. Makes no difference
Tried closing/reopening PC Sync, no difference.
If I click on the phone icon Nokia 6230 just below Entire bluetooth neighborhood then the right hand panel shows
Audio Gateway on Nokia 6230 (not connected)
COM1 on Nokia 6230 (not connected)
Dial Up Networking on Nokia 6230
Nokia PC Suite on Nokia 6230 (not connected)
OBEX file transfer on Nokia 6230
OBEX Object Push on Nokia 6230
If I double click Nokia PC Suite on Nokia 6230 it changes to show connected. If I right click on the icon and select status the signal strength shows GOOD, but after a minute or two the phone beeps and the icon changes back to not connected.
I noticed that after open/close PC Synch the first time I am no longer able to select Manage Connections. I have to reboot the machine before Manage connections will work again.
Throughout all of this, the icon in the system tray is saying that the Nokia 6230 is connected via Bluetooth.
Why is this so god damn difficult ??

Nokia 6230 Power On

Hi,
I have a Nokia 6230 which does not power on. The phone has previously worked and after it running flat due to not charging, the next time i have some to power the phone on nothing happens (obviously i have charged it).
When i plug the phone in - the charging indicator lights up on the display (so there is power to the phone)...
When i come to press the power on switch nothing happens.
Am i going to need to take this into a Nokia shop, or is there something i can do from home/work.
Regards.
James

If the charging section works (and you can see this on the display) then its likely that a trip to a service centre will solve the problem. The power switch itself is a common failure on 6230/i's. It may well be still under warranty in which case it wont cost you a penny providing they don't find cutomer abuse.

Connecting Guest PC virtual windows 98SE to Internet

I am running Windows 98SE on Guest PC 1.0 virtual and trying to connect to the Internet on dsl through my airport wireless connection. File sharing is open, and I thought I had both computers configured correctly, but I cannot get an internet connection. I'm looking for a walkthrough to see if I have missed anything. I do get warnings when I boot Windows that the hard disk has a different IP, and that there is a networking error. Looking for the genius who can help me with this. Thank you.

Hi Johnathan,
this is help for "Virtual PC" maybe it will help you, I would simply download the files on the Mac and transfer them to the "Guest PC" desktop
VPC Internet Help
kind regards,
Peter.

Nokia 6230 bluetooth

i use windows xp home with service pack 2
nokia pc suite 6.70.22
nokia 6230
trendnet tbw-101ub usb bluetooth adapter.
Bluetooth stacks:
Microsoft Bluetooth stack
Version 5.1.2600.2180
WIDCOMM Bluetooth stack
Version 1.4.3
Build 4
when trying to connect my phone i get the cannout authenticate phone message.. what can i do to stop this.
when i use the bluesoiele softeware that came with my adapter i can access my phone and its files. but i want to be bale to use pc suite so that i can back up my phone..
sumbody help me...

Hello
I am pretty new at this bluetooth game and I am trying to connect 2 mobiles to my PC. A Nokia 6230 and a Nokia 6310i. The 6310i was working via PC Suite 4 (all set up by a friend) but when I tried to connect the 6230 it would not work. I downloaded PC suite 6 and now neither of them will work. When I use the "Get Connected" function and ask the package to find either of the two mobiles all I get is a message saying "Cannot use the connection type. Check that all the needed hardware, software and drivers are available".
I have looked at the PC Suite system info (in Help) and it shows up as Connectivity Cable Driver 6.85.10.0 within which it lists the Microsoft Bluetooth stack version 5.1.2600, build 2180.
At this point I grind to a halt. Can someone help me please? What am I missing and what do I need to do to get my 2 mobiles talking to my PC (Toshiba) so that I can use the PC as my contact backup device?
Many thanks in advance
Revill

Nokia 6230 Error: allocateNewRecordStorage()

Hi,
when I try to add record to RecordStore I get "javax.microedition.rms.RecordStoreException: error writing new record data"
My simple code is byte[] menuData = new byte[]{1,2,3};;
RecordStore kozaza = RecordStore.openRecordStore("kozaza",true);
kozaza.addRecord(menuData,0,menuData.length);
kozaza.closeRecordStore();and the stackTrace I get is javax.microedition.rms.RecordStoreException: error writing new record data
     at javax.microedition.rms.RecordStore.allocateNewRecordStorage(+137)
     at javax.microedition.rms.RecordStore.addRecord(+66)
     at cz.uturn.vz.database.DBManager.saveTempRecord(+29)
     at cz.uturn.vz.database.PersistedDataInputStream.<init>(+159)
     at cz.uturn.vz.updater.Updater.executeUpdate(+300)
     at cz.uturn.vz.gui.MIDletLauncher.tryToGetMenu(+47)
     at cz.uturn.vz.gui.MIDletLauncher.acquireMenu(+33)
     at cz.uturn.vz.gui.MIDletLauncher.run(+14)
     at cz.uturn.vz.gui.Videozone.startApp(+28)
     at javax.microedition.midlet.MIDletProxy.startApp(+7)
     at com.nokia.mid.impl.isa.ui.MIDletManager.callStartApp(+4)
     at com.nokia.mid.impl.isa.ui.MIDletManager.activateMIDlet(+10)
     at com.nokia.mid.impl.isa.ui.MIDletManager.launchMIDlet(+15)
     at com.nokia.mid.impl.isa.ui.MIDletManager.init(+22)
     at com.nokia.mid.impl.isa.ui.MIDletManager.main(+86)What's the problem ? i write couple of records to different RecordStores before executing this snippet. Can it be that there is limited number of RecordStores on Nokia 6230 ?
Michal

And one more comment. I got the same kind of exception, but with different text "error reading record data" when reading records from RS.
To get around that I close RecordStore and open it again. I don't know what's cause of this exception, but I know that this dirty workaround works.
      String rsName=rs.getName();
      try{
        recordData = rs.getRecord(recID);
      catch (RecordStoreException ex){ // Hack for Nokia 6230
        if (ex.getMessage()!=null && ex.getMessage().equals("error reading record data")){
          boolean closed = false;
          while (!closed) {
            try {
              rs.closeRecordStore(); // it may need to be closed couple of times
            catch (RecordStoreNotOpenException e) {
              closed = true;
          rs = RecordStore.openRecordStore(rsName, true);
          recordData=rs.getRecord(recID);
        else {
          throw ex;
      }It's ugly, but it works.
Michal

Nokia music manager problems with Nokia 6230 model...

Hello. Recently I installed the newer version of nokia PC-Suite, the version 6.8.22. I have a nokia 6230 model HS-12 with HS-3 handsFree attached. Make the connection via Bluetooth (SMC USB Bluetooth) over a Windows XP SP2 system. The connection works fine.
The problem arrives with the new MusicManager software.
First, the playlists that this program creates, generates a error in mi phone. It says "Invalid tracklist". Surfing the web, the problem was that MusicManager generates the playlist entries (in the phone) refers to C:\ and D:\ (this for the MMC), when the phone internally works with unities A:\ and B:\. Changing "manually" the playlist it works, so if any people with design responsabilities read this, please take note.
Second, when convert my .MP3 files into .AAC files, the program converts the files into a .AAC but in MONO !! The music only sound in one channel, when the .MP3 is full stereo. Really, the conversion is in Stereo, but only converts one channel. The other remains muted. I have no idea of this problem. I listen the "mono" files in any Windows player, even at the phone.
If any people can help me, or have similar problems, or need more information please make a reply.
Thanks.

Hi
The tracklist stuff with 6230 (Ive owned a 6230 before) is a very difficult procedure, because it is not a drag and drop process from PC to phone. You have to giggle and dive onto the Audio Manager app in PC Suite where you have to find the Playlist folder in your phone memory and place all playlists there to be able to be recognized by the phone. Simple drag and drop will not work (like the m3u is in the MMC).
About your mono problem, I haven't checked out this feature of Music Manager because I still think its purely buggy even of the newer features and new face it has now. Better use other music software to transcode your MP3's such as dbpoweramp's Music Converter software (its free trial for 30 days, after that the MP3 encoding and Power Pack features are useless, if you download other codecs, you can use them after the trial.)
cheers.
The world might be a better place if you were I.

NOKIA 6230 ,DKU-2 ,running on windows 98SE says no...

Similar Messages

Maybe you are looking for