Nokia 6230 loses connection with PcSuite using DKU...

I got tired of trying to solve connectivity problems
with the bluetooth device and bought a new cable.
It seems that neither the Bluetooth or the Cable can transfer more than a few MegaBytes in one shot ("Connection to mobile phone lost").
I have also upgraded to Pc Suite 6.83, still no luck.
I'm Running Windows XP Home Edition SP2.
Suggestions?

I'm transferring the files via File Manager (PcSuite) or
using the Nokia driver itself. I'm transferring mp3 files, around 12-13 each time (a full disc). The mp3 files are usually around 2-3mb each...
Thanks.

Similar Messages

  • MacbookPro loses connection with Logitech V270 periodically during use

    My MacbookPro loses connection with Logitech V270 periodically during use. THis happens about every 5 to 10 minutes. I get the pic on the screen showing that the computer has lost the connection with the mouse and then after a few seconds it reconnects and works again. I've tested it out with my Powerbook and it works fine so I think it must be related to the MacbookPro. Anyone else experiencing this issue?

    Hi, Jeffrey!
    Yes, there have been a few such problems discussed here, and in the MacBook Pro Bluetooth, USB... forum; the Other Bluetooth devices forum; and elsewhere in Apple Discussions related to Logitech V270 performance issues with both PPC and Intel-based Macs, &/or to Bluetooth performance in Intel-based Macs specifically. But, given an assumption or two about the number of participants who are not posting about such problems, my guess is that both Bluetooth and the V270 are working for many users. (By which I mean: let's presume the problem is amenable to troubleshooting...)
    As an example, here's a link to a thread specifically about connection problems with the Logitech V270 — including various posts, apparently all by PPC users. But don't let "nay-sayers" get you down... By the way, the fact that the V270 works more reliably with your PowerBook is not, imo, definite proof that there's some inherent problem related to the MacBook Pro — various factors such as software, "pairing" and connection, differerent peripherals configuration, etc. may differ between the two Macs and affect the V270's functionality.
    I'm not aware of single, straightforward underlying cause for what you're experiencing; some troubleshooting and trial-and-error may be required to resolve it. So, if I may, here are a few thoughts/suggestions; perhaps some may be relevant &/or helpful:
      (1) Although Logitech says here that the V270 doesn't require a driver for Mac OS X functionality, they did recently update the Logitech Control Center software to v.2.0.0 (download page + VersionTracker reviews) for Universal compatibility — so why not at least try it?  (Keep in mind that Logitech recommends uninstalling all of their outdated software before installing anew — and, thus, this would probably also be a good idea if LCC 2.0.0 doesn't work for you after giving it a solid "test drive.")
      (2) "3rd-party" drivers (like SteerMouse — also a Universal Binary — often improve functionality of Bluetooth-enabled mice. Although dropped connections are probably due to another factor, this is shareware and offers a trial period — so, again, no harm in checking it out.
      (3) There are various troubleshooting steps worth trying for lost Bluetooth connections. Some that you may come across aren't applicable to your MacBook Pro — because, for example, its Bluetooth firmware and software should be current after application of the Mac OS X 10.4.6 Combo for Intel Update. Some other things worth considering include those listed below. Hopefully, one will work and you won't need to try them all:
        (a) The best first step to try usually involves simply deleting your mouse's "pairing" and using the Bluetooth Setup Assistant (BSA) to reconfigure it just as you did initially after purchase.
        (b) Sometimes a variation of "power-cyling" (of the internal Bluetooth module and the mouse) helps with a problem like this. With a laptop, this would involve two basic steps. Shut down the MacBook Pro normally (not restart), and leave it off for several minutes before rebooting. Remove the mouse's batteries for at least 1 minute, then replace them (preferably with new) — taking care of their polarity and that they are seated properly. Check that the internal metal contacts/springs, etc. are clean, unbent, and free from corrosion. Some users have reported ~high sensitivity to the in-place voltage of batteries for the Bluetooth connection process to succeed. Leave the V270's "on/off switch" in the "off" position while starting-up the MacBook Pro, then turn it "on" and re-pair if necessary.
    Some users have also reported success with Bluetooth-related problems by resetting PRAM and NVRAM. Others have tried resetting the Power Management Unit (PMU), although my personal virew is that (as described in the article just linked) this should always be considered a "last resort."  Article 303234 also lists both of these options.
        (c) Non-compliant USB device(s) and other USB-related issues (such as a device acting as a "traffic hog" through your controller) can cause this kind of problem. Most can be identified using the tried-and-true method of a process of elimination. (See, e.g., KnowledgeBase articles 58033 and 25243.)
        (d) Make a careful inventory of potential sources of 2.4 GHz RF interference in the environment(s) where the problems occur — and taking any appropriate steps to isolate and resolve any issues you may identify.
        (e) If nothing else has helped, perhaps further exploration is warranted.  Do you see anything in Activity Monitor or your system.log or console.log closely correlated to the times of "dropped connections" that may provide a clue about what's happening?
        (f) If the behavior began recently, re-applying the Mac OS X 10.4.6 Combo for Intel updater may be a step worth trying: several Bluetooth improvements were incorporated in this release, and reapplying the Combo updater has reportedly helped others with Bluetooth-related problems.
        (g) Although I don't recall an example of corrupt preferences causing this particular behavior, you may want to try removing ~/Library/Preferences/com.apple.Bluetooth.plist  and restarting (or logging-out and -in again), if nothing else has worked. As with any such preferences "refreshing," you'd need to reset things the way you like in System Preferences »» Bluetooth after this return to default preferences.
    I hope something here is useful to you in troubleshooting and solving the intermittent "dropped-connections" problem.
    Please post back to share your progress — it may help others.
    Regards,
    Dean
    [2,309 ⊥ 3,700]

  • I lose connection with network whenever put MacBook Pro to sleep or reboot. Lost network configuration. Have to use diagnostics to relocate and reconnect. What is the fix?

    I lose connection with network (router: Airport Extreme, latest firmware) whenever MacBook Pro put to sleep. Have to use diagnostics to reconnect. Tells me network configurations have changed, then reconnects me to network. What is the fix?

    Try the following, in order, until (hopefully) resolved:
    1a. Delete Preferred Network(s)
    System Preferences > Network > AirPort > Advanced > AirPort tab
    Under "Preferred Networks," delete the network(s) you regularly use from the list.
    1b. Delete AirPort Keychain Entries
    Launch the "Keychain Access" application located in Applications/Utilties.
    Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    1c. Add Preferred Network(s)
    System Preferences > Network > AirPort > Advanced > AirPort tab
    Add the preferred network(s) using the "+" button.
    Restart or log out then back in.
    2. Move System Configuration Files
    (Note: You will have to reestablish your network connections settings.)
    Go to /Library/Preferences
    Move the SystemConfiguration folder to the desktop.
    Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

  • Airport loses connection with MR814 V2

    I have an iBook G4. My Airport loses connection with my Netgear MR814 V2 router. The only way to get it back is to unplug / plugin the router. The connection is ok as long as I'm on the iBook. The problem seems to occur after I've shut the iBook down for the day and then the next day the connection is gone.
    I also have my Windows based Dell laptop using the router (wirelessly) and never have this problem.
    This is really frustrating. Any ideas would be greatly appreciated!!
    Mark
    iBook G4   Mac OS X (10.4.6)  

    I do not have the answer for you, but I am suffering the same thing with my macBook Pro. After about 15 minutes, I loses the connection, and the airport icon in the menu bar goes transparent. Nothing works to renew the connection except to unplug and re-plug my router. If you hear of any remedy, please post.
    Jeff

  • MacBook Pro loses connection with Bluetooth Headphones

    Hi,
    Every time I turn off my bluetooth headphones and then turn them back on, my mid-2009 MBP loses connection with them and forces me to re-pair them. It comes up with an error where the only option is "Stop using headphones" - does anyone know a solution to this?
    My headphone are Sony DR-BT101.
    Jamie

    Same problem here... With Mac OS Lion. Any solution to this?

  • My mac mini loses connection with my receiver after turning off the receiver then back on

    My Mac Mini loses connection with my Onkyo receiver NR-609 after turning off the receiver then back on.  The only way to reistablish the connection is to unplug then replug the HDMI cable to the Mac Mini.  There's no effect if I unplug then replug the HDMI to the receiver.  Any help or suggestions would be appreciated.  I've searched a lot but haven't found much of anything so if this is covered elsewhere I would greatly appreciate a link.
    Thanks in advance

    Hi and thanks.  I don't know about the audio prefs.  When it happens I am not able to see or hear anything from the computer until I un/re-plug the HDMI to the Mini.  I'm not sure it's changing to something else because there's nothing else connected for it to change to.  I could see that perhaps the audio will change to the Mac Mini's internal speaker. 
    I found out last night that if, after I lose the signal,  I use my ipad to play a video on the Mac Mini using the Remote app and home sharing the signal gets righted and I can see/hear the computer again.  It's quite an inconvenient fix though and I wish and hope someone here can help me.

  • Losing connection with safari using airport base station

    Airport base station. Frequently loses connection with safari, even though the station shows green. Same problem with all our devices, IMac, MacBook Pro, IPads, Iphone etc. However, disconnect not at the same time, some devices works, others don't.

    Hello sjobizz,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628?viewlocale=en_US
    Wi-Fi and Bluetooth: Potential sources of wireless interference
    http://support.apple.com/kb/ht1365
    Best of luck,
    Mario

  • I can no longer connect with others using FaceTime after the mandatory update

    I updated my iPad software and now when I try to connect with someone using FaceTime I can never fully connect.
    Can anyone help me or seen this issue?

    Unable to make or receive FaceTime calls after April 16, 2014
    http://support.apple.com/kb/TS5419
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Set Up Alert Sounds
    http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
    http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457#19087457
    How to watch FaceTime calls on the big screen with Apple TV
    http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • I have a ipad 2 and it does not connect with safari using 3G

    I have a ipad 2 and it does not connect with safari using 3G

    Sorry to hear you are having issues, but there are 2 ways you can print from that device.
    The first one is to simply email photos or documents to your printers email address by attaching them to a new message.
    The other option is to download the HP ePrint Home and Biz app from Google Play. The app is free and should allow you to print pictures and documents to the printer with ease. I have added a link below on how to get started with this app.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • Can I connect with Database using Session Bean

    Hi,
    I am new to EJB. I have small doubt.
    can I connect with Database using Session Bean.
    Regards,
    Murali.

    Double post of http://forum.java.sun.com/thread.jspa?threadID=687239&tstart=0

  • Is there any way to connect an ipad to a ethernet  cord or connection with out using wi fi

    Is there any way to connect an ipad to a ethernet  cord or connect with out using wi fi?  Thank  you

    The closest you can come, without having a 3G iPad is to have a cellular mobile hotspot like the Mifi or such device, use that to get to wifi, or to tether it to a cell phone.

  • Why does my macbook pro often lose connection with the canon mx922?

    why does my macbook pro often lose connection with the canon mx922? This happened with the HP printer as well.

    This may answer your Bonjour questions:
    http://support.apple.com/kb/PH11449
    https://www.apple.com/support/bonjour/
    Ciao.

  • Airport Extreme intermittently loses connection with Internet?

    I have an Airport Extreme connected to a router that is connected to our cable modem. Internet connection is fine, but the Airport Extreme will intermittently lose connection with the Internet and shows a solid amber light. Turning the Airport Extreme off and then on again will resolve the issue, however, this happens about once per week (at different days/times) and would like to ensure a consistent connection even when I'm not at home. (We are thinking of installing a lighting control system that depends upon a consistent wireless connection to work properly, even when we aren't home to restart the Airport Extreme). Please advise on what the trouble might be and how we can get a permanent resolution to the issue.

    Is your Extreme an 802.11g (domed-shape) or 802.11n (squarish) model? Do you have the Extreme connected to the other router by Ethernet? Finally, is the Extreme configured as a bridge, i.e., Connection Sharing = Off (Bridge Mode)?

  • Ethernet connection with labview using Modbus

    I want to communicate via  Ehternet connection with LabVIEW using modbus protocol, Just as RS232 (COM) coomunication wiht Modbus in Labview.
    mini

    See these threads.
    http://forums.ni.com/ni/board/message?board.id=170​&message.id=151337&view=by_date_ascending&page=1
    http://sine.ni.com/apps/we/niepd_web_display.displ​ay_epd4?p_guid=F1582737BACF5CA8E0340003BA7CCD71&p_​...

  • WiFi phones lose connection with AEBS, unable to reconnect

    I have 2 WiFi phones with T-Mobile Hot Spot at Home, a Blackberry 8900 and a Nokia 6086. Had a Linksys router that got so it required rebooting several times a day. Got AEBS, worked flawlessly for a while. Now having a similar problem. Seems to be worse on cold nights. The WiFi connection drops and the cell phones switch to the cell towers (which is a poor connection). Attempts to reconnect using the phone results in the message "Incorrect Passcode Security Key" or something similar to that. The only solution so far is to reboot the AEBS. Both my Macs use Tiger, no Leopard as they are PPC's. Had to borrow a Leopard Mac to set the AEBS using the utility, but do not have it always a available. As far as I can tell, when the phones lose connection, so does the lap top, but the hardwired iMac seems to still work. Can you help me out on this?

    Thanks for the suggestion - it's a good idea. Unfortunately it wasn't possible at the time as my husband was mid-game using the router! The problem didn't happen last night - all very odd! If it happens again I'll certainly try your suggestion. Many thanks.

Maybe you are looking for

  • In my ip 5s lte is not working please he me out from this problem

    lte is not working in my iPhone 5s . Tell me some good idea for solving out from this problem

  • Form - entry without data collection

    I've got the form, I want to use it in my organization as a fill-in form that the user will print and then it will clear and wait for the next user to fill-in the fields. I DON'T want or need to collect any data, I DON'T want any verbage at the top o

  • Generating a formatted table of contents

    I'm trying to generate a formatted TOC in Frame 8. When I generate it, it's in Times New Roman and not in the format I want. I've tried importing the formats I want from another TOC and manually making the changes, but when I need to update the TOC,

  • Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED

    Hi, Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED This load is getting failed every day. It is a full load and records are getting transferered and added. when we check in details tab i

  • Double-clicking topic checks it out and does not open

    Hi all, I'm experiencing a strange, vexing problem with both of our source-controlled help projects that no one else on my team is experiencing. This appears to be a problem with my computer/installation of RoboHelp. Today, I went into our help proje