Nokia 6233 - Sitecom Bleutooth 2.0 USB adapter

Cann't get connected using PC Suite. Using Bleutooth Information Manager delivered with adaptor or Windows I can see my telephone en transfer files. PC Suite does not seem to see my telephone. However, my telephone does seem to be connected with the PC. How come?

Go to Music Manager - Options - Settings and check there under you phone tab that where the music is saved as deafult and change it if needed

Similar Messages

Nokia 6233 does not notice any USB-cable

I'm trying to upload some files from my phone to my computer. The problem is that when I connect USB-cable (ca-53, should be suitable with 6233) nothing appears on my phone screen. When I click the settings > connections > usb-cable, it only tells me "first connect the usb-datacable".
So what should I do? The problem isn't in my computer, I've tested it with another usb connection.

In that case, uninstall all Nokia related software and drivers with Revo, clean the registry with Ccleaner. Reinstall the latest PC Suite, turn off antivirus during install. Reboot the PC. Start PC Suite and then connect the phone in PC Suite mode.
http://www.revouninstaller.com/revo_uninstaller_free_download.html
http://www.filehippo.com/download_ccleaner/
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Nokia C7 not charging over micro-USB?

Hi,
Just wanted to check if this was a feature of the phone in that you can only charge the Nokia C7 using the micro-usb socket when it is connected to a PC / Laptop? If you connect it to a USB adapter / car usb socket then it will not charge using this method.......even though my other non Nokia phones charge using this method?
Is this a hardware limitation or can they enable it with a software fix?

I don't think it has anything to do with cable length. I do not use the small usb cable that came with Nokia C7. I'm using a compatible usb cable that came with my Kodak camera. Its also is nearly two feet long but am able to charge my phone with it. Am able to say that its charging because the battery indicator cycles as it does with a charger.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

Since upgrading to Leopard I cannot iSync to my Nokia 6233

Since upgrading to Leopard I cannot iSync to my Nokia 6233 via bluetooth (I never did it by USB). The devices are paired and I can transfer files via Bluetooth so the basic setup is there. I have installed the Nova Media phone plugins for isync and my 6233 appears on my isynch bar and allows me to chose what to sync but when I click sync it cannot connect. (I have also been unable to use launchtonet from Nova Media since the upgrade. When I try to use it I get a message that no devices were found within reach.) Something is out of kilter - anyone got a suggestion? thanks a lot, JJ

Hello,
I have the same Nokia 6233 and the following way solved the problem.
1. Go to /Applications -> iSync.app -> Contents -> PlugIns -> ApplePhoneConduit.syncdevice -> Contents -> PlugIns -> PhoneModelsSync.phoneplugin -> Contents -> Resources. (From Finder, use Shift-Command-G, for Go to Folder; or Control-click iSync in Applications.)
2. Open MetaClasses.plist in a text editor.
3. Search for <key>com.nokia.6230</key>. Then find the end of the script for the 6230 phone - the </dict> tag just before the next phone's <key> tag.
4. Copy the following script and paste it between the </dict> tag for the 6230 and the next phone's <key> tag:
<key>com.nokia.6234</key>
<dict>
<key>Identification</key>
<dict>
<key>com.apple.cgmi+cgmm</key>
<string>Nokia+Nokia 6234</string>
</dict>
<key>InheritsFrom</key>
<array>
<string>family.com.nokia.series40.3rdEd.bus.bt</string>
</array>
<key>Services</key>
<array>
<dict>
<key>ServiceName</key>
<string>com.apple.model</string>
<key>ServiceProperties</key>
<dict>
<key>ModelIcon</key>
<string>NOK6234.tiff</string>
<key>ModelName</key>
<string>6234</string>
</dict>
</dict>
</array>
</dict>
5. If you have a Nokia 6233, change all the references to 6233 to 6234.
6. Save and close the MetaClasses.plist file.
7. In the same folder, duplicate the file NOK6230.tiff. Change the filename to NOK6234.tiff (or NOK6233.tiff if that is your phone). This file is the image of your phone which appears in iSync - if you want an accurate pic of the 6233/6234, find one and save it as a 60x60 transparent .tiff file).
8. Open Bluetooth Preferences. Delete any existing pairing for your Nokia 6233 or 6234 phone.
9. Create a new pairing for your phone.
10. Open iSync and you should now be able to sync your phone:)
If it works just copy the MetaClasses.plist file and save it anywhere. For the next updates You just have to copy it into the folder in iSync. This helps You saving time.
If You want to use my MetaClasses.plist, You may send me Your Email-adress. Then I will send it to You.
Good luck

Nokia 6233 - Music track list no longer shows char...

My phone has stopped showing the track names in the track list. They names are only represented by small empty boxes. The track names appear to have downloaded OK as they are clearly visible if you browse the memory card. Can anyone help? I'm using Win XP SP2, PC Suite 6.82.22, Nokia 6233 connected by USB cable CA-53

No - it was even easier than that! Apparently it was to do with the format that the track was saved in. Somehow my settings had changed from m4a to aac - resetting theis to m4a cured the problem.

Nokia 6233 music files transferring issue

I tried transferring some mp3 files into my nokia 6233 using Nokia PC suite's Audio manager. But after selecting all the files I need to transfer and clicking transfer to phone button, the files get listed in the bottom pane where the status is displayed.After that the transferring status is automatically becoming "cancelled". What may be the problem??? I am using a Nokia DKU-2 USB cable... there is no problem while transferring images ets from the phone to PC.. The only problem is with transferring music files from my PC to the phone (BTW I dont have a SIM as of now... is it necessary to have a sim for transferring files into the phone???)
Deepak Krishnan
Proud to be an Indian

You do not need a SIM card.
Try copying the music accros with the windows explorer while your phone is connect to the PC in Data Storage mode.

Nokia 6233 - PC Suit Cable Connection & Music

I have recently purchased the Nokia 6233 and would appreciate any advice on the following (in laymans terms would be great as I am not very tech minded) 1. PC suit will not recognise my phone (USB connection) At first the connection was intermittent e.g. sometimes it will recognise it and at other times it wont. Now after telling me to update to the new PC Suite, which I did (and it didn't work at all so I uninstalled it and re-loaded the old version )it will not recognise my phone. 2. When it did connect I managed to transfer some music from CD to PC Suit and then from the PC Suite to my phone. However I kept getting a message that there wasn't enough memory on the phone to download the music (even when I tried up to 3 songs) so I bought a memory card. This was good as I can now download quite a lot of songs. But they will on only play one at a time. How do I get the tracks to play continuously? Yours frustrated Nokia 6233 owner

Hi frustrated nokia 6233 owner,
I also have a 6233, with cable. I had the same problem where the pc suite would not recognise my phone when it was connected. I tried this solution from another post:
Go to Control Program, Add Or Remove Programs, select PC Nokai Suite, select Support Information, and select Repair. Select PC Connectivity. Select PC Connectivity Solution, select Change, and Select Repair.
The pc suite recognised my phone after that. However, there may be a downside, though it recognises my phone the pc suite functions no longer work. I dont know if that is a seperate problem. Give it a go. I hope it works.
As for music, i'm not sure, sorry. Mine plays all tracks automatically.You may need to check the settings in music player. What format are your music files?
hope i've been of some assitance to you.

Problems with software the update with Nokia 6233

Problems with software the update with Nokia 6233
Hello,
I have so far some-paints tries my software to update.
Each time the update procedure begins, sometime stands then on the telephone “test mode”.
On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
If I change my profile attitudes since that for example, then after a telephone restart again deleted.
What there can I make?
GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
You need to take it to a nokia care point for repair under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Connection constantly dropping with edimax ew-7612uan USB adapter

Hi there,
I have just installed a newly purchased edimax ew-7612uan USB wireless adapter, the problem that I'm getting is that the connection works fine on boot however it keeps dropping very frequently.
This can be reset by running netctl restart my-network. which is a temporary fix but I can't keep on doing this every 5 minutes or so when the connection drops.
I don't think there is a problem with the USB adapter as it appears to work fine in windows (I don't work fine with windows though!).
The same problem has happened on both of my Arch computers... I don't use any other distributions so I don't know if this is an arch specific problem or a general Linux problem. It also happens when using the live disk.
The old adapter is still installed in the box but once I can get this one working properly it will be removed.
The output of dmesg is as follows
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Apr 1 12:19:51 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=104c8e28-5731-4470-8911-313aca8c0d0f rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fedf7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fedf800-0x000000007fedffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fee3000-0x000000007feeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: HP-Pavilion GB394AA-ABU a6030.uk/LEONITE, BIOS 5.17 04/20/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7fedf max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5f40-0x000f5f4f] mapped at [ffff8800000f5f40]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7fedefff]
[ 0.000000] [mem 0x7fe00000-0x7fedefff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x379ea000-0x37cecfff]
[ 0.000000] ACPI: RSDP 00000000000f8310 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000007fee30c0 000054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000007fee7a80 0000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000007fee3280 004798 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000007fee0000 000040
[ 0.000000] ACPI: SLIC 000000007fee7cc0 000176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: HPET 000000007fee7e80 000038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 000000007fee7f00 00003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 000000007fee7bc0 000084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 000000007fee8460 000304 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fedefff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fedefff]
[ 0.000000] NODE_DATA [mem 0x7feda000-0x7fedefff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7fedefff]
[ 0.000000] On node 0 totalpages: 523901
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8124 pages used for memmap
[ 0.000000] DMA32 zone: 519903 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x7ff00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s86336 r8192 d24256 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515692
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=104c8e28-5731-4470-8911-313aca8c0d0f rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2047396K/2095604K available (5271K kernel code, 836K rwdata, 1676K rodata, 1124K init, 1324K bss, 48208K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2133.881 MHz processor
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 4269.58 BogoMIPS (lpj=7112936)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003383] Security Framework initialized
[ 0.003400] AppArmor: AppArmor disabled by boot time parameter
[ 0.003402] Yama: becoming mindful.
[ 0.003637] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004945] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005645] Mount-cache hash table entries: 256
[ 0.005953] Initializing cgroup subsys memory
[ 0.005966] Initializing cgroup subsys devices
[ 0.005969] Initializing cgroup subsys freezer
[ 0.005972] Initializing cgroup subsys net_cls
[ 0.005975] Initializing cgroup subsys blkio
[ 0.006006] CPU: Physical Processor ID: 0
[ 0.006008] CPU: Processor Core ID: 0
[ 0.006011] mce: CPU supports 6 MCE banks
[ 0.006021] CPU0: Thermal monitoring enabled (TM2)
[ 0.006030] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.006122] Freeing SMP alternatives memory: 20K (ffffffff819ec000 - ffffffff819f1000)
[ 0.007776] ACPI: Core revision 20131115
[ 0.010162] ACPI: All ACPI Tables successfully acquired
[ 0.013362] ftrace: allocating 21068 entries in 83 pages
[ 0.023793] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057912] smpboot: CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz (fam: 06, model: 0f, stepping: 06)
[ 0.059999] APIC calibration not consistent with PM-Timer: 4652ms instead of 100ms
[ 0.059999] APIC delta adjusted to PM-Timer: 3346453 (155709996)
[ 0.059999] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.059999] perf_event_intel: PEBS disabled due to CPU errata
[ 0.059999] ... version: 2
[ 0.059999] ... bit width: 40
[ 0.059999] ... generic registers: 2
[ 0.059999] ... value mask: 000000ffffffffff
[ 0.059999] ... max period: 000000007fffffff
[ 0.059999] ... fixed-purpose events: 3
[ 0.059999] ... event mask: 0000000700000003
[ 0.083418] x86: Booting SMP configuration:
[ 0.089999] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083422] .... node #0, CPUs: #1
[ 0.089999] x86: Booted up 1 node, 2 CPUs
[ 0.089999] smpboot: Total of 2 processors activated (8538.17 BogoMIPS)
[ 0.090131] devtmpfs: initialized
[ 0.093350] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes)
[ 0.094547] RTC time: 8:54:04, date: 04/02/14
[ 0.094607] NET: Registered protocol family 16
[ 0.094741] cpuidle: using governor ladder
[ 0.094743] cpuidle: using governor menu
[ 0.094771] ACPI: bus type PCI registered
[ 0.094774] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.094845] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.094848] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.094848] PCI: Using configuration type 1 for base access
[ 0.094952] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.094954] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.094955] mtrr: probably your BIOS does not setup all CPUs.
[ 0.094956] mtrr: corrected configuration.
[ 0.096731] bio: create slab <bio-0> at 0
[ 0.096745] ACPI: Added _OSI(Module Device)
[ 0.096745] ACPI: Added _OSI(Processor Device)
[ 0.096745] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.096745] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.100165] ACPI: SSDT 000000007fee7f80 000175 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.100379] ACPI: Dynamic OEM Table Load:
[ 0.100382] ACPI: SSDT (null) 000175 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.100470] ACPI: SSDT 000000007fee8390 0000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.100675] ACPI: Dynamic OEM Table Load:
[ 0.100678] ACPI: SSDT (null) 0000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.100813] ACPI: Interpreter enabled
[ 0.100824] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.100840] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.100842] ACPI: Using IOAPIC for interrupt routing
[ 0.100873] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.100967] ACPI: No dock devices found.
[ 0.103333] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.103333] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.103333] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.103333] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.103333] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.103333] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.103333] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.103333] acpi PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored)
[ 0.103333] PCI: root bus 00: using default resources
[ 0.103333] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.103333] PCI host bridge to bus 0000:00
[ 0.103333] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.103333] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.103333] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.103333] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[ 0.103333] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[ 0.103333] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.103333] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.103333] pci 0000:00:1d.0: reg 0x20: [io 0xff00-0xff1f]
[ 0.103333] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.103333] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.103333] pci 0000:00:1d.1: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.103333] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.103333] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.103333] pci 0000:00:1d.2: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.103333] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.103333] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.103333] pci 0000:00:1d.3: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.103333] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.103333] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.103333] pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.103333] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.103379] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.103420] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.103511] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.103555] pci 0000:00:1f.0: [8086:27b0] type 00 class 0x060100
[ 0.103727] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.103741] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.103750] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.103760] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.103769] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.103778] pci 0000:00:1f.1: reg 0x20: [io 0xf900-0xf90f]
[ 0.103876] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.103890] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
[ 0.103899] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
[ 0.103907] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
[ 0.103915] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
[ 0.103923] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf40f]
[ 0.103932] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffc000-0xfdffc3ff]
[ 0.103961] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.104042] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.104093] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.104236] pci 0000:01:00.0: [1002:7181] type 00 class 0x030000
[ 0.104251] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.104262] pci 0000:01:00.0: reg 0x18: [mem 0xfddf0000-0xfddfffff 64bit]
[ 0.104270] pci 0000:01:00.0: reg 0x20: [io 0xce00-0xceff]
[ 0.104283] pci 0000:01:00.0: reg 0x30: [mem 0xfddc0000-0xfdddffff pref]
[ 0.104314] pci 0000:01:00.0: supports D1 D2
[ 0.104362] pci 0000:01:00.1: [1002:71a1] type 00 class 0x038000
[ 0.104373] pci 0000:01:00.1: reg 0x10: [mem 0xfdde0000-0xfddeffff 64bit]
[ 0.104417] pci 0000:01:00.1: supports D1 D2
[ 0.104457] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.104466] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.104470] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.104473] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.104477] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.104526] pci 0000:02:01.0: [11c1:5811] type 00 class 0x0c0010
[ 0.104543] pci 0000:02:01.0: reg 0x10: [mem 0xfdeff000-0xfdefffff]
[ 0.104616] pci 0000:02:01.0: supports D1 D2
[ 0.104619] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.104672] pci 0000:02:04.0: [1102:0002] type 00 class 0x040100
[ 0.104690] pci 0000:02:04.0: reg 0x10: [io 0xdf00-0xdf1f]
[ 0.104763] pci 0000:02:04.0: supports D1 D2
[ 0.104806] pci 0000:02:04.1: [1102:7002] type 00 class 0x098000
[ 0.104822] pci 0000:02:04.1: reg 0x10: [io 0xde00-0xde07]
[ 0.104895] pci 0000:02:04.1: supports D1 D2
[ 0.104946] pci 0000:02:05.0: [168c:0013] type 00 class 0x020000
[ 0.104964] pci 0000:02:05.0: reg 0x10: [mem 0xfdee0000-0xfdeeffff]
[ 0.105084] pci 0000:02:08.0: [8086:27dc] type 00 class 0x020000
[ 0.105101] pci 0000:02:08.0: reg 0x10: [mem 0xfdefe000-0xfdefefff]
[ 0.105112] pci 0000:02:08.0: reg 0x14: [io 0xdd00-0xdd3f]
[ 0.105176] pci 0000:02:08.0: supports D1 D2
[ 0.105178] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105247] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.105252] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.105256] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.105262] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.105264] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.105612] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.105678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.105743] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.105807] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.105870] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.105934] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.105998] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.106063] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.106250] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.106258] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.106290] Found 1 acpi root devices
[ 0.106365] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.106365] vgaarb: loaded
[ 0.106365] vgaarb: bridge control possible 0000:01:00.0
[ 0.106365] PCI: Using ACPI for IRQ routing
[ 0.106365] PCI: pci_cache_line_size set to 64 bytes
[ 0.106365] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.106365] e820: reserve RAM buffer [mem 0x7fedf800-0x7fffffff]
[ 0.106365] NetLabel: Initializing
[ 0.106365] NetLabel: domain hash size = 128
[ 0.106365] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.106365] NetLabel: unlabeled traffic allowed by default
[ 0.106365] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.106365] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.106365] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.106689] Switched to clocksource hpet
[ 0.109999] pnp: PnP ACPI init
[ 0.109999] ACPI: bus type PNP registered
[ 0.113399] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.113403] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.113406] system 00:00: [io 0x0294-0x0297] has been reserved
[ 0.113408] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.113413] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.113426] pnp 00:01: [dma 4]
[ 0.113459] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.113547] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.113597] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.113626] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.113664] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.113790] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.113848] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.113911] system 00:08: [io 0x0400-0x04bf] has been reserved
[ 0.113915] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.113958] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.114177] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.114182] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.114356] system 00:0b: [mem 0x000cf400-0x000cffff] has been reserved
[ 0.114359] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.114362] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.114365] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.114368] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.114371] system 00:0b: [mem 0x7fee0000-0x7fefffff] could not be reserved
[ 0.114374] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.114377] system 00:0b: [mem 0x00100000-0x7fedffff] could not be reserved
[ 0.114380] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.114382] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.114385] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.114388] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.114390] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[ 0.114394] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.114404] pnp: PnP ACPI: found 12 devices
[ 0.114405] ACPI: bus type PNP unregistered
[ 0.120198] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.120198] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.120198] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.120198] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.120198] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.120198] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.120198] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.120198] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.120198] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.120198] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.120198] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.120198] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.120198] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.120198] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.120198] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.120198] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.120198] NET: Registered protocol family 2
[ 0.120198] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.120198] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.120198] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.120198] TCP: reno registered
[ 0.120198] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.120198] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.120198] NET: Registered protocol family 1
[ 0.120198] pci 0000:01:00.0: Boot video device
[ 0.120198] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.120198] PCI: CLS 32 bytes, default 64
[ 0.120198] Unpacking initramfs...
[ 0.191296] Freeing initrd memory: 3084K (ffff8800379ea000 - ffff880037ced000)
[ 0.191480] Scanning for low memory corruption every 60 seconds
[ 0.191882] audit: initializing netlink socket (disabled)
[ 0.191902] type=2000 audit(1396428835.189:1): initialized
[ 0.206560] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.208164] zbud: loaded
[ 0.208353] VFS: Disk quotas dquot_6.5.2
[ 0.208404] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.208606] msgmni has been set to 4004
[ 0.208673] Key type big_key registered
[ 0.208929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.208971] io scheduler noop registered
[ 0.208973] io scheduler deadline registered
[ 0.209007] io scheduler cfq registered (default)
[ 0.209208] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.209282] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.209302] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.209360] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.209362] vesafb: scrolling: redraw
[ 0.209364] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.209895] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004400000, using 5824k, total 5824k
[ 0.265490] Console: switching to colour frame buffer device 175x65
[ 0.320013] fb0: VESA VGA frame buffer device
[ 0.320013] intel_idle: does not run on family 6 model 15
[ 0.320013] GHES: HEST is not enabled!
[ 0.320771] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.321201] Linux agpgart interface v0.103
[ 0.321270] rtc_cmos 00:03: RTC can wake from S4
[ 0.321402] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.321430] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.321540] drop_monitor: Initializing network drop monitor service
[ 0.321607] TCP: cubic registered
[ 0.321718] NET: Registered protocol family 10
[ 0.321912] NET: Registered protocol family 17
[ 0.321924] Key type dns_resolver registered
[ 0.322165] registered taskstats version 1
[ 0.322582] Magic number: 10:872:926
[ 0.322659] rtc_cmos 00:03: setting system clock to 2014-04-02 08:54:05 UTC (1396428845)
[ 0.322694] PM: Hibernation image not present or could not be loaded.
[ 0.324137] Freeing unused kernel memory: 1124K (ffffffff818d3000 - ffffffff819ec000)
[ 0.324139] Write protecting the kernel read-only data: 8192k
[ 0.326967] Freeing unused kernel memory: 860K (ffff880001529000 - ffff880001600000)
[ 0.327354] Freeing unused kernel memory: 372K (ffff8800017a3000 - ffff880001800000)
[ 0.335950] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.337560] systemd-udevd[46]: starting version 212
[ 0.357062] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.360689] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.360743] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.364815] ACPI: bus type USB registered
[ 0.364858] usbcore: registered new interface driver usbfs
[ 0.364871] usbcore: registered new interface driver hub
[ 0.367300] usbcore: registered new device driver usb
[ 0.367497] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.367497] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.367497] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.369227] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.369272] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 0.370097] hub 1-0:1.0: USB hub found
[ 0.370108] hub 1-0:1.0: 2 ports detected
[ 0.370356] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.370364] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 0.370398] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 0.370561] hub 2-0:1.0: USB hub found
[ 0.370570] hub 2-0:1.0: 2 ports detected
[ 0.370923] ehci-pci: EHCI PCI platform driver
[ 0.371254] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.371263] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 0.371299] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 0.371479] hub 3-0:1.0: USB hub found
[ 0.371489] hub 3-0:1.0: 2 ports detected
[ 0.371685] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.371695] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 0.371731] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 0.371759] SCSI subsystem initialized
[ 0.372294] hub 4-0:1.0: USB hub found
[ 0.372721] hub 4-0:1.0: 2 ports detected
[ 0.373567] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.373575] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 0.380063] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.380074] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 0.380372] libata version 3.00 loaded.
[ 0.392071] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.392288] hub 5-0:1.0: USB hub found
[ 0.392298] hub 5-0:1.0: 8 ports detected
[ 0.413670] hub 1-0:1.0: USB hub found
[ 0.413685] hub 1-0:1.0: 2 ports detected
[ 0.418065] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.428408] firewire_ohci 0000:02:01.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 0.444932] hub 2-0:1.0: USB hub found
[ 0.444946] hub 2-0:1.0: 2 ports detected
[ 0.475276] hub 3-0:1.0: USB hub found
[ 0.475295] hub 3-0:1.0: 2 ports detected
[ 0.498283] hub 4-0:1.0: USB hub found
[ 0.498296] hub 4-0:1.0: 2 ports detected
[ 0.498418] ata_piix 0000:00:1f.1: version 2.13
[ 0.499273] scsi0 : ata_piix
[ 0.499357] scsi1 : ata_piix
[ 0.499402] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 0.499404] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 0.499515] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.499556] ata2: port disabled--ignoring
[ 0.500252] scsi2 : ata_piix
[ 0.500325] scsi3 : ata_piix
[ 0.500368] ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[ 0.500371] ata4: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[ 0.699056] ata4.01: NODEV after polling detection
[ 0.705789] ata4.00: ATAPI: HL-DT-STDVDRRW GSA-H30L, S755, max UDMA/33
[ 0.705879] ata1.00: ATA-7: Hitachi HDT725032VLAT80, V54OA42A, max UDMA/133
[ 0.705882] ata1.00: 625142448 sectors, multi 16: LBA48
[ 0.705886] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 0.718854] ata4.00: configured for UDMA/33
[ 0.721647] ata1.00: configured for UDMA/33
[ 0.721797] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 0.725607] ata3.00: ATA-8: SAMSUNG HD320KJ, CP100-10, max UDMA7
[ 0.725612] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.734331] ata3.00: configured for UDMA/133
[ 0.734447] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD320KJ CP10 PQ: 0 ANSI: 5
[ 0.736470] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-H30L S755 PQ: 0 ANSI: 5
[ 0.739885] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.739947] sd 0:0:0:0: [sda] Write Protect is off
[ 0.739950] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.739977] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.740339] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.740397] sd 2:0:0:0: [sdb] Write Protect is off
[ 0.740400] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.740426] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.743908] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.743912] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.744145] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 0.748725] sdb: sdb1 sdb2
[ 0.749036] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 0.752217] usb 5-6: new high-speed USB device number 2 using ehci-pci
[ 0.778689] sda: sda1 sda2 sda3 sda4
[ 0.779129] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.929217] firewire_core 0000:02:01.0: created device fw0: GUID 0011d800013adf24, S400
[ 1.006684] usb 5-7: new high-speed USB device number 3 using ehci-pci
[ 1.173252] usb-storage 5-7:1.0: USB Mass Storage device detected
[ 1.173332] scsi4 : usb-storage 5-7:1.0
[ 1.173427] usbcore: registered new interface driver usb-storage
[ 1.197356] tsc: Refined TSC clocksource calibration: 2133.939 MHz
[ 1.616813] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[ 1.624951] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.920203] random: nonblocking pool is initialized
[ 2.247183] Switched to clocksource tsc
[ 2.253827] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 2.260322] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 2.266946] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 2.273571] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 2.280559] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 2.281310] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 2.282059] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 2.282809] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 2.498874] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 2.499029] systemd[1]: Detected architecture 'x86-64'.
[ 2.499095] systemd[1]: No hostname configured.
[ 2.499100] systemd[1]: Set hostname to <localhost>.
[ 3.019084] systemd[1]: Configuration file /etc/systemd/system/netctl@ethernet\x2dstatic.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.052564] systemd[1]: Configuration file /etc/systemd/system/netctl@my\x2dnetwork.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.168175] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 3.168523] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.168587] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.168600] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s8.device...
[ 3.168617] systemd[1]: Starting Remote File Systems.
[ 3.168629] systemd[1]: Reached target Remote File Systems.
[ 3.168639] systemd[1]: Expecting device sys-subsystem-net-devices-wlp2s5.device...
[ 3.168655] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.168691] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.168701] systemd[1]: Starting Paths.
[ 3.168712] systemd[1]: Reached target Paths.
[ 3.168722] systemd[1]: Starting Encrypted Volumes.
[ 3.168732] systemd[1]: Reached target Encrypted Volumes.
[ 3.168756] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.168851] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.168865] systemd[1]: Expecting device dev-sda4.device...
[ 3.168877] systemd[1]: Expecting device dev-disk-by\x2duuid-8e743759\x2dc6f4\x2d4e8f\x2dae25\x2d2c24a8cba618.device...
[ 3.168890] systemd[1]: Expecting device dev-disk-by\x2duuid-c96171f5\x2d9704\x2d4abf\x2d84ae\x2d2c4f78252a60.device...
[ 3.168900] systemd[1]: Expecting device dev-disk-by\x2duuid-12EC23D6EC23B341.device...
[ 3.168911] systemd[1]: Starting Root Slice.
[ 3.175997] systemd[1]: Created slice Root Slice.
[ 3.176010] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.176047] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.176058] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.176087] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.176098] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.176119] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.176133] systemd[1]: Starting udev Kernel Socket.
[ 3.176155] systemd[1]: Listening on udev Kernel Socket.
[ 3.176169] systemd[1]: Starting udev Control Socket.
[ 3.176193] systemd[1]: Listening on udev Control Socket.
[ 3.176203] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.176232] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.176243] systemd[1]: Starting User and Session Slice.
[ 3.176438] systemd[1]: Created slice User and Session Slice.
[ 3.176452] systemd[1]: Starting Journal Socket.
[ 3.176501] systemd[1]: Listening on Journal Socket.
[ 3.176518] systemd[1]: Starting System Slice.
[ 3.176712] systemd[1]: Created slice System Slice.
[ 3.176728] systemd[1]: Started File System Check on Root Device.
[ 3.176738] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.176940] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.176954] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.212380] systemd[1]: Started Load Kernel Modules.
[ 3.252481] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.253015] systemd[1]: Starting udev Coldplug all Devices...
[ 3.253553] systemd[1]: Mounted FUSE Control File System.
[ 3.253577] systemd[1]: Mounting Configuration File System...
[ 3.254197] systemd[1]: Starting Setup Virtual Console...
[ 3.254782] systemd[1]: Mounting Debug File System...
[ 3.255307] systemd[1]: Mounting Huge Pages File System...
[ 3.285128] systemd[1]: Starting Apply Kernel Variables...
[ 3.285663] systemd[1]: Starting system-netctl.slice.
[ 3.285916] systemd[1]: Created slice system-netctl.slice.
[ 3.285940] systemd[1]: Starting system-getty.slice.
[ 3.286240] systemd[1]: Created slice system-getty.slice.
[ 3.286797] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.286822] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.287292] systemd[1]: Starting Journal Service...
[ 3.287880] systemd[1]: Started Journal Service.
[ 4.510133] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 4.568872] systemd-udevd[136]: starting version 212
[ 5.479614] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.479621] ACPI: Power Button [PWRB]
[ 5.479693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.479697] ACPI: Power Button [PWRF]
[ 5.490126] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.490129] ACPI: Thermal Zone [THRM] (19 C)
[ 5.629665] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM2S 1 (20131115/utaddress-251)
[ 5.629673] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM1K 2 (20131115/utaddress-251)
[ 5.629677] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE1 3 (20131115/utaddress-251)
[ 5.629682] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629685] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
[ 5.629689] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629691] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIV 1 (20131115/utaddress-251)
[ 5.629695] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPO_ 2 (20131115/utaddress-251)
[ 5.629699] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \PALD 3 (20131115/utaddress-251)
[ 5.629703] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629705] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.639853] leds_ss4200: no LED devices found
[ 5.687416] ACPI: Fan [FAN] (on)
[ 5.708079] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.931908] cfg80211: Calling CRDA to update world regulatory domain
[ 6.109750] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 6.109754] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.133562] e100 0000:02:08.0 eth0: addr 0xfdefe000, irq 20, MAC addr 00:1a:92:de:71:43
[ 6.410441] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.599698] gameport gameport0: EMU10K1 is pci0000:02:04.1/gameport0, io 0xde00, speed 980kHz
[ 6.659464] [drm] Initialized drm 1.1.0 20060810
[ 6.722900] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.926377] iTCO_vendor_support: vendor-support=0
[ 6.963443] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.963473] iTCO_wdt: Found a ICH7DH TCO device (Version=2, TCOBASE=0x0460)
[ 6.963581] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.184227] Adding 4286784k swap on /dev/sda4. Priority:-1 extents:1 across:4286784k FS
[ 7.195727] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
[ 7.263090] rtl8192cu: Chip version 0x11
[ 7.334816] ath5k 0000:02:05.0: registered as 'phy1'
[ 7.352471] rtl8192cu: MAC address: 80:1f:02:af:89:eb
[ 7.352477] rtl8192cu: Board Type 0
[ 7.352718] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 7.352752] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 7.352808] usbcore: registered new interface driver rtl8192cu
[ 7.445824] [drm] radeon kernel modesetting enabled.
[ 7.445878] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[ 7.445880] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 7.316873] systemd-udevd[150]: renamed network interface eth0 to enp2s8
[ 7.445900] Console: switching
[ 7.445902] to colour dummy device 80x25
[ 7.446670] [drm] initializing kernel modesetting (RV515 0x1002:0x7181 0x1462:0x0400).
[ 7.446689] [drm] register mmio base: 0xFDDF0000
[ 7.446691] [drm] register mmio size: 65536
[ 7.446807] ATOM BIOS: 113
[ 7.446821] [drm] Generation 2 PCI interface, using max accessible memory
[ 7.446827] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 7.446830] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 7.446845] [drm] Detected VRAM RAM=512M, BAR=256M
[ 7.446847] [drm] RAM width 128bits DDR
[ 7.446916] [TTM] Zone kernel: Available graphics memory: 1026428 kiB
[ 7.446918] [TTM] Initializing pool allocator
[ 7.446923] [TTM] Initializing DMA pool allocator
[ 7.446942] [drm] radeon: 512M of VRAM memory ready
[ 7.446944] [drm] radeon: 512M of GTT memory ready.
[ 7.446965] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.458262] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 7.459147] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 7.459171] radeon 0000:01:00.0: WB enabled
[ 7.459176] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000000 and cpu addr 0xffff88007bb31000
[ 7.459179] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.459180] [drm] Driver supports precise vblank timestamp query.
[ 7.459192] [drm] radeon: irq initialized.
[ 7.459208] [drm] Loading R500 Microcode
[ 7.476935] platform microcode: Direct firmware load failed with error -2
[ 7.476939] platform microcode: Falling back to user helper
[ 7.477387] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
[ 7.477402] platform microcode: Direct firmware load failed with error -2
[ 7.477405] platform microcode: Falling back to user helper
[ 7.477982] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 7.503453] [drm] radeon: ring at 0x0000000020001000
[ 7.503490] [drm] ring test succeeded in 6 usecs
[ 7.503671] [drm] ib test succeeded in 0 usecs
[ 7.503948] [drm] Radeon Display Connectors
[ 7.503950] [drm] Connector 0:
[ 7.503951] [drm] DVI-I-1
[ 7.503953] [drm] HPD2
[ 7.503955] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 7.503957] [drm] Encoders:
[ 7.503958] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.503960] [drm] DFP3: INTERNAL_LVTM1
[ 7.503961] [drm] Connector 1:
[ 7.503963] [drm] SVIDEO-1
[ 7.503964] [drm] Encoders:
[ 7.503965] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 7.503967] [drm] Connector 2:
[ 7.503968] [drm] DVI-I-2
[ 7.503969] [drm] HPD1
[ 7.503971] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 7.503973] [drm] Encoders:
[ 7.503974] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.503976] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 7.583351] [drm] fb mappable at 0xE00C0000
[ 7.583351] [drm] vram apper at 0xE0000000
[ 7.583351] [drm] size 7258112
[ 7.583351] [drm] fb depth is 24
[ 7.583351] [drm] pitch is 6912
[ 7.583719] fbcon: radeondrmfb (fb0) is primary device
[ 7.600235] Console: switching to colour frame buffer device 210x65
[ 7.605874] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 7.605877] radeon 0000:01:00.0: registered panic notifier
[ 7.605883] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[ 7.625781] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 7.626479] rtlwifi: wireless switch is on
[ 7.642639] fuse init (API version 7.22)
[ 7.647140] ath: EEPROM regdomain: 0x0
[ 7.647144] ath: EEPROM indicates default country code should be used
[ 7.647146] ath: doing EEPROM country->regdmn map search
[ 7.647149] ath: country maps to regdmn code: 0x3a
[ 7.647151] ath: Country alpha2 being used: US
[ 7.647153] ath: Regpair used: 0x3a
[ 7.647274] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 7.647537] ath5k: phy1: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
[ 7.647540] ath5k: phy1: RF5111 5GHz radio found (0x17)
[ 7.647543] ath5k: phy1: RF2111 2GHz radio found (0x23)
[ 7.709874] systemd-udevd[143]: renamed network interface wlan1 to wlp2s5
[ 8.136233] systemd-udevd[141]: renamed network interface wlan0 to wlp0s29f7u6
[ 8.322562] coretemp coretemp.0: Using relative temperature scale!
[ 8.322706] coretemp coretemp.0: Using relative temperature scale!
[ 8.594743] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 8.638575] mousedev: PS/2 mouse device common for all mice
[ 9.284691] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 9.328865] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 10.357627] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[ 10.363499] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
[ 10.363772] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
[ 10.865860] systemd-journald[119]: Received request to flush runtime journal from PID 1
[ 11.002834] rtl8192cu: MAC auto ON okay!
[ 11.035475] rtl8192cu: Tx queue select: 0x05
[ 11.407281] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 12.592937] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 12.617024] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 12.654273] wlp0s29f7u6: authenticated
[ 12.659239] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 12.663526] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 12.663558] wlp0s29f7u6: associated
[ 12.663598] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 216.768500] perf samples too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
[ 295.526133] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 295.538508] cfg80211: Calling CRDA for country: US
[ 295.779488] rtl8192cu: MAC auto ON okay!
[ 295.813132] rtl8192cu: Tx queue select: 0x05
[ 296.188680] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 297.158587] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 297.171430] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 297.181575] wlp0s29f7u6: authenticated
[ 297.185043] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 297.198798] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 297.198839] wlp0s29f7u6: associated
[ 297.198885] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 466.957760] perf samples too long (4993 > 4990), lowering kernel.perf_event_max_sample_rate to 25200
[ 653.237523] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 653.252189] cfg80211: Calling CRDA for country: GB
[ 653.492515] rtl8192cu: MAC auto ON okay!
[ 653.526155] rtl8192cu: Tx queue select: 0x05
[ 653.902071] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 654.830321] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 654.843456] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 654.863972] wlp0s29f7u6: authenticated
[ 654.867473] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 654.879214] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 654.879258] wlp0s29f7u6: associated
[ 654.879319] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 845.720733] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 845.733072] cfg80211: Calling CRDA to update world regulatory domain
[ 845.972288] rtl8192cu: MAC auto ON okay!
[ 846.005180] rtl8192cu: Tx queue select: 0x05
[ 846.376969] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 847.303644] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 847.316223] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 847.341107] wlp0s29f7u6: authenticated
[ 847.345443] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 847.369345] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 847.369380] wlp0s29f7u6: associated
[ 847.369422] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 1165.243225] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 1165.255458] cfg80211: Calling CRDA for country: GB
[ 1165.501950] rtl8192cu: MAC auto ON okay!
[ 1165.534590] rtl8192cu: Tx queue select: 0x05
[ 1165.906506] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 1166.922571] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 1166.935133] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 1166.962884] wlp0s29f7u6: authenticated
[ 1166.963550] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 1166.969384] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 1166.969418] wlp0s29f7u6: associated
[ 1166.969455] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 1317.334883] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 1317.347568] cfg80211: Calling CRDA to update world regulatory domain
[ 1317.593153] rtl8192cu: MAC auto ON okay!
[ 1317.625922] rtl8192cu: Tx queue select: 0x05
[ 1318.002339] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 1318.943694] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 1318.959587] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 1318.961335] wlp0s29f7u6: authenticated
[ 1318.965144] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 1318.988340] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 1318.988376] wlp0s29f7u6: associated
[ 1318.988421] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 1469.086853] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 1469.099248] cfg80211: Calling CRDA to update world regulatory domain
[ 1469.337346] rtl8192cu: MAC auto ON okay!
[ 1469.370119] rtl8192cu: Tx queue select: 0x05
[ 1469.742158] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 1470.673984] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 1470.686540] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 1470.691410] wlp0s29f7u6: authenticated
[ 1470.693241] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 1470.702651] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 1470.702687] wlp0s29f7u6: associated
[ 1470.702728] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 1680.753182] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 1680.765752] cfg80211: Calling CRDA for country: GB
[ 1680.998495] rtl8192cu: MAC auto ON okay!
[ 1681.031255] rtl8192cu: Tx queue select: 0x05
[ 1681.406799] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 1682.318347] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 1682.330930] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 1682.342673] wlp0s29f7u6: authenticated
[ 1682.343689] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 1682.350924] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 1682.350956] wlp0s29f7u6: associated
[ 1682.350994] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 2206.980860] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 2206.993170] cfg80211: Calling CRDA to update world regulatory domain
[ 2207.227511] rtl8192cu: MAC auto ON okay!
[ 2207.260157] rtl8192cu: Tx queue select: 0x05
[ 2207.631823] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 2208.565086] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 2208.577695] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 2208.585581] wlp0s29f7u6: authenticated
[ 2208.587355] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 2208.616071] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 2208.616112] wlp0s29f7u6: associated
[ 2208.616155] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 2504.014135] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 2504.026462] cfg80211: Calling CRDA to update world regulatory domain
[ 2504.273688] rtl8192cu: MAC auto ON okay!
[ 2504.309828] rtl8192cu: Tx queue select: 0x05
[ 2504.702760] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 2505.627571] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 2505.640510] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 2505.649754] wlp0s29f7u6: authenticated
[ 2505.650508] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 2505.680782] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 2505.680831] wlp0s29f7u6: associated
[ 2505.680887] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 2948.553142] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 2948.565823] cfg80211: Calling CRDA for country: GB
[ 2948.814051] rtl8192cu: MAC auto ON okay!
[ 2948.846690] rtl8192cu: Tx queue select: 0x05
[ 2949.220485] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 2950.173570] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 2950.186113] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 2950.190241] wlp0s29f7u6: authenticated
If there is anything else I can provide that may help please ask, this has been driving me mad for days now!

Looks like a driver bug. You could try multiple things, as a start:
- switch channel
- toggle encryption
- different usb port

I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices.

My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.

My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.

Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter?
If you can find such a thing. I really doubt that exists since USB is a data connector not a video connector.
would allow me to run the audio through my stereo.
That would depend on this adapter.

I recently purchased an Onkyo stereo receiver with a wireless USB adapter, UWF-1, and want to stream audio from my MacBook Pro through my stereo system. The receiver tells me it is connected to my wireless LAN, but I cannot get music to play?

New to the community here, thanks for your patience. I recently purchased an Onkyo TX-8050 Network Stereo Receiver with the UWF-1 USB adapter with the intent to stream audio from my MacBook Pro to the stereo. I have gone through the setup instructions for the adapter and the receiver gives me a message saying that it is connected to the password protected network, but that is as far as I can get.
I have gone into iTunes and clicked on the "Open Stream" option, but I just get a pop up box labeled "URL" that is empty. I have Home Sharing turned on and File Sharing turned on, but I am not seeing the receiver in my Finder window or as a iTunes device.
I would appreciate any and all advice and assistance.
Thanks so much.
Dan

So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

Nokia 6233 v05.10 odd behaviour

Hello!
After thoroughly searching not only this board but the entire Internet, I found no answer to my question so I decided to register and ASK.
I need to know if any of you owners of a Nokia 6233 observed this odd behaviour of your phone - so please keep reading.
I purchased the phone 16 days ago. Being my first Nokia, I took time to exploit its every feature, therefore draining the battery quite quickly. I discharged and fully charged the battery at least 3 times in the first 3 days, without leaving it plugged-in overnight (as far as I know this is no longer necessary). The battery life time increased progressively until a maximum of three days of normal use, meaning moderate talking (under 20 minutes per day), little or no use of Java apps, camera, media players or GPRS/EDGE connection. The screen savers are off, power saver is on, sleep mode is on. Packet data connection - when needed and network mode is GSM only because I do not use 3G. All these should get me the best stand-by time possible, right? Well, they did, until...
I bought a new microSD card, 2.0 GB storage, made by SanDisk. The card works fine, I put my favorite music and video clips on it - all the stuff you do when you have enough space. Since then, the battery life decreased SUBSTANTIALLY to LESS THAN 24 HOURS. And there's more. The battery drains even if the phone is turned off, in roughly the same amount of time. I have never ever seen anything like this. Sometimes the battery is so low that the phone takes a few minutes before displaying the battery charging icon and, when started, it asks for hour/date settings.
So, I need to know if anybody else noticed battery life decrease with bigger memory card capacity, and what's to be done.

Have you tried using the in-box memory card(That came with the phone) again? There's something wrong with your phone and battery if the problem still occurs..
GooD LucKMessage Edited by nj15 on 15-Aug-200704:10 PM

Problem Printing to HP laserjet 4 plus via a parallel-usb adapter

This generic parallel-usb adapter cable worked fine on a Sony laptop printing to HP laserjet 4 plus, but when I tried to do the same with the Mac book pro (2.4 ghz mac 10.4.10), the printer is recognized and it prints but only in a faded fashion (as if it is draft printing). I looked in the control panel on the printer and tried to make a couple adjustments, but that didn't help. The cable's page said it had mac 8.2 or whatever support. It did come with some drivers disc but it is too small to work in the mac (not a standard size cd).
I would apreciate some help in this matter.
Moorty

Hi Moorty
Hi wm300
I have connected a HP LaserJet 4L to Mac OS X 10.3.9 using a Keyspan parallel to USB adaptor cable. You will require the same hardware setup. It is more than a connector, the cable it has a small converter card in it.
Keyspan parallel USB printer adaptor
You already have such a similar cable.
Your problem seems to be the right driver.
remove the printer then Add it again and decide which driver you want to use.
Your model HP will work with the drivers available in OS X, HP LaserJet 4MP, or the old driver downloaded from the HP website for the LJ4/4M will also work.
A new driver for it will also work available here
http://buymelunch.org/printing/usbtb/
So once connected to a USB port, your Mac will see it, load the right driver, and the printer should work.
regards roam

Will it work with R500? Amped Wireless High Power Wireless-300N 600mW USB Adapter.

Hi all, new to this site and also to owning a laptop. Bought what I believe to be 2009 Thinkpad R500. It works well with windows 7 installed. I bought it so that I could stream music in my shop connected to my stereo. I sometimes think I should have maybe save up a little more and bought a new laptop. Paid $200 for it. Anyway I was wondering if anyone could tell if the item below will work with my laptop? My thoughts are to some time in the near future to also install an outdoor wifi antenna on my house. One thing I did notice in my shop which confused me a little was when I had my laptop and my wife's laptop down in my shop, her signal strength was around 20 mbps and mine only showed 13 mbps. Any ideas to why?
Add Long Range Wi-Fi to your Computer: Whether you're using a Mac or Windows laptop or desktop PC, the UA600 attaches to an available USB port (2 USB ports for maximum performance) on your computer and provides long range Wi-Fi connectivity for connecting to your home Wi-Fi network or a Wi-Fi hotspot.
Maximum Wi-Fi Range: The internal High Power 600mW Amplifier (12x the power of standard adapters) is optimally paired with a High Power 5dBi Wi-Fi antenna to provide maximum wireless range and performance.
Simple Setup: Setup is quick and simple: Insert the installation CD, install the software and plug in the High Power USB Adapter.
Great for Power Users: The High Power USB Adapter is designed for Wi-Fi users that demand the most from their Wi-Fi networks. The UA600 features wireless data reception speeds of up to 300Mbps for streaming video, transferring large data files and other high traffic Wi-Fi activities.
Upgradable Antenna for More Wi-Fi Range: The High Power USB Adapter features a detachable antenna that can be replaced with an indoor or outdoor high gain antenna for even more Wi-Fi range or for special installation applications.
Universal Compatibility: The High Power USB Adapter works great with all 2.4GHz 802.11b/g or n wireless routers, Wi-Fi networks and manufacturers.

Your machine as it left the factory:
P8600(2.4GHz), 2GB RAM, 160GB 5400rpm HD, 15.4in 1280x800 LCD, Intel 4500MHD, CDRW/DVDRW, Intel 802.11agn wireless, Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint Reader, 6c Li-Ion, WinXP Pro
I'm going to take a stab in the dak that the card is Intel 5100AGN, which *should* support both bands. That's what my own R500 came with.
Depending on the amount of $$ that you want to spend on a router, there are many possible options. I'd suggest checking out the recommendations from various broadband forums.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Nokia 6233 - Sitecom Bleutooth 2.0 USB adapter

Similar Messages

Maybe you are looking for