Nokia 6234 Startup White Screen Of Death

Hello,
I've been using the Nokia 6234 for quite a while but suddenly it stopped working. when I try to start the phone the screen flashes a couple of times and then it goes back to sleep. The battery icon is visible in the top-left corner. I cannot do anything after it starts. Most interesting is the fact that if i try using a different SIM (other than Vodafone) i get an error message and I'm asked to enter the restriction code . This part works excellent - i can write numbers without the phone shutting down or smth else.
Does anyone have any ideas about the problem?
I've tried entering reset codes - they don't work, Nokia PC Suite does not get in touch with the phone because it's shut down, i do not know anything else to try.
Solved!
Go to Solution.

I've seen this happen to the sister model, the 6233. The cause is usually corrupted firmware or by having several 1000's of messages in the inbox/sent items.
If it won't fully boot (to the main screen) with or without a sim then there is nothing that you can do yourself to fix it.
The only option is to take it to a nokia care point for repair.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.
Message Edited by psychomania on 21-Sep-2009 03:26 PM

Similar Messages

Nokia X3-00 white screen of death !!!

Hello guys.
I own a Nokia X3-00.
When i first purchased it, after 2 days, it failed to switch on.
Instead a white screen appeared and after the nokai logo appears, the screen flashes 3-4 times and than it goes off.
I got a new set in place of it since it was just 3 days old.
now the new phone i got also got the same problem of white screen.
I wanted to ask that what is the reason behind this white screen problem?
I didnt update the firmware and didnt disturbed any settings of the pghone.
Kindly plz assist me.

May be 2 truth's are disclosed:
Hey guys, Never Give Up.
Actually, I faced the same problem on the 27th day of purchasing the phone. I're really very very afraid. But, later I understood that there isn't any problem with my phone. Actually, during the 1st month of purchasing my phone I used it as a Internet Modem. It harms any mobile very much. Whenever I use my phone as a modem for a long time, for 2-3 days it disturbs me this way. But If I let it to take a long rest, it forgets about that. So don't be worry if you like me using your phone as a modem. If you aren't then remember these speeches, actually you may not beleive me on this point even Nokia will also, but I'm telling you from my real experience.
""IF YOU UPDATE YOUR FIRMWARE, YOUR PHONE FOR A SHORT PERIOD WILL DISTURB YOU IN THE WAY YOU MENTIONED ABOVE. DON'T BE WORRY ABOUT IT. LET IT TO TAKE REST. AFTER 5-6 IT'LL WORK AS YOU WISH.""
'I'

White Screen of Death at Startup - Boot Camp Based Problem

I recently received my Intel-based 20" iMac yesterday and this morning I set it up and transfered all of my files from my old Windows XP computer successfully. I then played around with the iLife suite and a few other programs and decided I should probably run Boot Camp and set up Windows for a few Windows-based programs I need and some games that are Windows only.
I started to look up Boot Camp on the Apple website, then realized iMacs that came with Leapord pre-installed should already have Boot Camp on them. I searched in Spotlight for "Boot camp" and found the "Boot Camp Assistant." I thought that was close enough, so I started the application up.
First, it told me I needed to partition my hard drive and create a space for Windows. I figured I would have only a few esential programs on it, so I opted for a partion of about 10-12 GB if I remember correctly. The installer then told me to insert my Windows disc and I then put in my Windows XP SP1 installation CD. It read it, shutdown, then booted back up into what I recognized as the Windows setup screen.
It went through the normal setup steps, until it got to a point where it asked what partition I should install Windows on. There was only one partition listed, so obviously I chose that one, but what was weird was the partition said it was over 100,000 MB, which is not the 10 GB I told it to partition. I got scared when it told me it would have to format the partition since it wasn't suitable for a Windows installation yet. I figured it wouldn't hurt to recheck the amount I partitioned, so I quit out of the Windows installer.
Next, my Mac restarted and went to the infamous white screen of death.
I have tried basically every single way to fix this.
I tried:
Alt - Option - PR (Reset the PRam) And waited for both 2, 3, 4, and 5 dings
Alt
Option
Shift (Safe Mode)
Put in the Mac OS X disc and booted up holding:
D
C
None of these worked. Sorry if my key abbreviations are off, by the way, because I'm writing this on a Windows laptop and I haven't gotten the keys down for Macs yet.
Does anyone have any suggestions? Apple call support is curretly closed, at least in my timezone. I'll probably try calling them tomorrow, but mostly I'm afraid of having to get a whole new harddrive and/or iMac. I haven't backed up my data anywhere yet (this is just my first day with the Mac) so if I lose the data, there goes upwards of a few thousand dollars in music and other data expenses.
Thanks in advance for ideas, I'll try anything you throw at me now, as long it doesn't void the warranty or involve formatting my hard drive. (Though if you know a way to format my hard drive AND save my data, that would be even better)

All the data that you transfered to the iMac should still be on the PC which originally contained the content. Transferring to the Mac is in reality only copying.
A Boot Camp Windows installation requires Windows SP2 only;
To use Boot Camp, you need:
1. An Intel-based Macintosh computer with a built-in or USB keyboard and a built-in trackpad or USB mouse.
2. Mac OS X 10.5 or later
3. The latest firmware updates available for your Intel-based Mac.
4. At least 10 GB of free space on your startup disk (single partition).
5. A full, single-disc version of Windows Vista, Windows XP Home Edition or Professional with Service Pack 2 or later. Boot Camp does not include Windows. You must provide your own properly licensed installation disc.
  Important: A Windows XP installation disc must include Service Pack 2 (SP2). You cannot install an earlier version of Windows and upgrade to Windows XP, nor install an earlier version of Windows XP and update it to SP2. 
6. Boot Camp Assistant (find it installed in /Applications/Utilities/ on Leopard).
Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage

I have a 13 inch MacBook Pro (2009) & the "White Screen of Death" is present. Need help?

I have a 13 inch MacBook Pro (2009). Recently I bought an extended hard drive because I had used up the memory on my iDisk. As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down. Once I hooked up my Pro to the power cord & logged in, the "White Screen of Death" appeared on the home display. Obviously the battery still works, my phone is able to charge along with the extended drive, I am able to adjust the lighting on my keyboard along with adjusting the brightness on my screen, but the "White Screen" remains. I need help in determining the cause of this issue & the steps I'll need to take in order to resolve this. I love my Pro, all my documents, photos & music are on it & the last thing I want to do is kill my wallet by buying a new Pro. So could someone on here please help me? It would be greatly appreciated & I thank you in advance!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

White screen of Death. Reinstalled OSX Maverick but data is missing. HELP!

Help! i had a white screen of death on my iMac. Did a check via disk utility and the hard drive seems to be fine. I have partioned the hard drive into two volumes previously.
However, when I tried to reinstall OSX Maverick on the first partition, where it was originally installed, it was pointed out as being full and I was forced to reinstall it on the second partition. No problem with that.
However, when I start up the iMac, there are no files to be found. And this is really very upsetting to me as they contain memories of my family which I really treasure.
Am I doing anything wrong? When I go in to the set up utility and try to select partition 1, it will still give me the white screen of death and that the disk is full
Kindly advise if there is anyway for me to "force" install it on partiton 1 and regain access to my files.

If you reinstalled onto the second partition and used the same username/password combo for your admin user account, then you can boot into the voluime, open up the original volume, and drag your data from it to the same places on the second volume. To reinstall, you need to remove stuff from the full volume.
The following articles have some good tips:
Freeing space on your Mac OS X startup disk and
Freeing Up Hard Disk Space

White Screen Of Death-Did all the key hold downs

Hello,
After the spinning beach ball of death today, the Imac is now in the White screen of death mode. I did power off, command option , p r keys with two chimes. I did the c key hold down. I tried the tech tool deluxe disc. I tried the power off only. I have unplugged and let it sit. Is there any thing else I can do?
Thank You!

Sorry, Kenichi, your post wasn't there a minute ago:(
+did not work+
Assuming you can get the Install Disc into the optical drive - with it already in the optical drive, then you power-up while holding down and continuing to hold down the c key (it's small case, so cap's lock off) until you see a spinning dial on the white screen (at that point you can release the c key) - how far does it get while trying to accomplish this?
Does it do anything at all? Make any noise? Power light on or flashing? Do you ever get to hear the Mac startup "gong" sound? or see the spinning dial?
The following article provides the startup sequence you might witness:
http://support.apple.com/kb/HT2674?viewlocale=en_US
http://support.apple.com/kb/HT2538?viewlocale=en_US
Message was edited by: myhighway

N97 White screen of death (WSOD) with FW V11.0.21

I have my nokia N97 almost a week now. This morning opera mini froze and I couldn't turn it off so I removed the battery. After reinserting the battery and turned the phone on I got the White screen of death (WSOD), just a white screen with the word nokia on it. I tried to boot it without the simcard and also waiting 30+ minutes before reinserting the battery. But I still have de WSOD...
Do I have to keep it on to drain the battery or are there other methods to fix this problem. I don't feel like sending it to Nokia because I have to wait more than 2 weeks before it's fixed...
The past 2 weeks I have used it intensively, installed a lot of apps. Put 300+ songs on it and and some movies. I had the email widget on the home screen, I heard that's one of the problem on other forums...
Any ideas how I can boot up normally....
Solved!
Go to Solution.

WSOD
Hard Reset
The combination is:
Shift + Space bar + Backspace + Power your phone
Instructions to bypass WSOD:
All you need is: Methodology 1 as posted by some other user
N97
Charger
Follow these steps:
Turn off your phone.
Insert charger.
Remove charger right after screen lights up.
Wait a couple of seconds till screen turns off and just after that press power button.
After standart vibration notification just put your charger in.
VOILA! You can insert your PIN again!
I am using this method for almost a month and it seems that this is only one way to boot up my N97.
It would be nice to hear if this method works for you
Anyway, I have found a solution, that works for me everytime the WSOD comes up. It goes like this when WSOD keeps coming up:
Instructions to bypass WSOD:
All you need is: Methodology 1 as posted by some other user
1. Pull battery and re-insert it.
2. Power up the phone by holding the "Power button + RED key + GREEN key + Camera key" and wait 30 seconds or so.
3. After the wait the phone should come up normally asking for the SIM passcode and everything is fine.
"Power button + RED key + GREEN key + Camera key" is a sort of "soft reset", it keeps all the installations and everything as opposed to the "hard reset".
Hope this helps, and let's all hope that Nokia QA start testing their smartphone software with a little more care. I cannot imagine that normal people would live with such blatant bugs.
My solution to yesterday experience
What I have done:
1. Switch Off Nokia N97 by pulling out the battery
2. Pull out the SIM CARD and Memory Card
3. Switch on The Nokia N97 without SIM AND MEMORY CARD
4. Then do the Factory Settings by going to phone menu options because by this time WSOD will be over.
5. Then Insert the SIM and restart it.
6. Again Switch Off the same and insert Memory Card.
7. Switch on again and restore settings as backedup whether in your PC or memory card to get last settings.

HT1379 White screen of death help!

I have the white screen of death, no word or symbols. I have a DVD in the drive and can't get it out so I can insert my startup disk to fix it. How do I remove it? Wireless keyboard and mouse.

The icon you're seeing means that the Mac can't find your hard disk or read from it.
Insert the first of the two recovery disks that came with your computer and hold C while you turn it on. This will boot from the DVD. From the menubar, choose Disk Utility and see if your hard disk is listed in the left-hand pane. If not, restart the computer and hold D this time. Run the Apple hardware test and see if it passes.
If your hard disk IS listed in Disk Utility, choose "Verify Disk" and if any problems are found, repair it. Try restarting after that.
If the disk is not listed, and the Apple hardware test fails, your hard drive has most likely gone bad and will need to be replaced. You can take the computer to Apple if it's under warranty and they'll do it for free or you can do it yourself by following these directions:
http://manuals.info.apple.com/en/MacBook13inch_HardDriveDIY.pdf

Installed Lion then white screen of death

Hello I just installed Lion based on an email that said I had to switch for the migration from Mobile Me to ICloud. As soon as it downloaded, there was a problem. A screen came up that said, problem loading restart to try again. I did and now I have the white screen of death with a flashing apple, file with a question mark and the no symbol, I.e. circle with a line through it. I've shut down at least twice but when I restart all I get is the white screen and flashing symbols. Everything is backed up via my time machine but this is crazy. Pls help. Thank you. T

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

White Screen of Death Questions [PLEASE HELP!]

If someone actually cares about my issue, they will read all of the following. Let's see how many of you are out here and how many just want to answer simple short questions for reputation.
Okay, so I've ran into my first ever iPod Touch issue. I've never owned an iPhone, but I have had an iPod in the past and know a bit about them. I'm going to be 100% honest and I need a serious answer because I'm upset and angry. If anyone can be bothered to read the following, THANK YOU. If anyone could help me out in any way by giving me suggestions/tips and/or a solution, THANK YOU. But anything that can help is appreciated.
I had my board shorts on when this ocurred. I went to the toilet, doing my own business. I had my iPod Touch in my bank pocket which went to about half way down my thigh. The iPod Touch at the time was facing away from my thigh. Pulling down my pants, the iPod Touch hit the tiled floor. It hardly even hit the floor, all I heard was a little click and I realised it was my iPod. It was flat at the time, I picked it up and pressed the Home button immediately to ensure it was okay. It sort of lit up like a white background, but had a very low opacity. Since it was flat, I assumed it was normal.
Putting my iPod on charge right after my toilet break, I waited and waited for it to charge quickly enough for me to see the screen as I was a little worried not having seen that faded screen before. When the Apple logo was to appear, it gave me a lit up white screen. I was so confused as there were no marks AT ALL on my screen or any other part of the iPod.
NOTE: My iPod is still under warranty.
Did my research and came to the conclusion that it was the infamous 'White Screen of Death'. Where do I go from here? I have no clue!
I have important information such as a To Do list and my Contacts within the iPod. I NEED to retrieve this information. Is there any way I can do this?
I can still use the iPod, as if the screen were showing. Sounds are working, but there is just a blank, lit up white screen. Sometimes when I hold the Home button, On/Off button & the Volume Up buttoon all at the same time for ~10-20 seconds, the Apple logo comes up as if the screen was all fixed. 5 Seconds later, it goes all funny as if there were faded white lines and a faded white background but still being able to see the logo/screen. When the iPod loads, it just goes back to the lit up white screen.
Here's another odd thing to this, when I leave my iPod Touch sitting in a spot remotely, without touching it for a few hours, when I come back to it and hit the Home button, the iPod will begin to work fine as if nothing ever happened. No white screen, no nothing, just simply use it as I wish. I can even sometimes lock it, and then unclock it again with it still showing perfectly. However, when I tend to click the On/Off button after this happens, or if I just continue to use it for ~1 minute, it will eventually do the same as the above paragraph in second last sentence.
This may be important:
The iPod charges fine.
The iPod can be used with my computer and iTunes fine.
To sum it all up, everything can be done, including using the iPod, but with a lit up white screen.
Here are some questions I have for you guys:
Will Apple cover this in my warranty?
If they won't, what should I do?
How much would a replacement screen cost?
Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
What could be the cause and why?
How can I retrieve that important information? (Contacts & To Do List)
Have you got any suggestions/tips for me?
I need this resolved guys. I'm very upset and angry over the whole situation. If a little thump on the tiles like that (it's not like I dropped it or anything) can damage the screen that much, then this devices from Apple can't be very reliable. All I'm asking for is some genuine service/help to resolve my issue. If this can be done, I will be one VERY happy person.
Daniel

Will Apple cover this in my warranty?
As stated above it is not covered by the warranty as it will be deemed accidental damage. You can try explaining what happened to somebody at the Genius Bar and they may cut you some slack and replace it at no cost. They might not though as Apple has started to really come down hard on eliminating replacing accidentally damaged iPods at no cost.
If they won't, what should I do?
Again, bring it into them anyways and explain what happened. You have nothing to lose either way. Otherwise, you really only have 2 other options. Send it to a third party service center to have them take a look at it and possibly repair the iPod, or do some studying online and learn how to open up the device yourself and take a look. There are some excellent step-by-step repair guides at http://www.ifixit.com/.
How much would a replacement screen cost?
This depends on where or how you have it repaired. Here is Apple's repair pricing guide.
http://www.apple.com/support/ipod/service/prices/
Third party repair centers will cost less and they'll actually swap out the bad part rather than just replace the entire iPod as Apple does.
Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
If you have a warranty on it still, I wouldn't quite yet. Take it to your local Apple store as explained above. Otherwise, I would only if you feel comfortable working with small electronics and consider yourself handy with them.
What could be the cause and why?
As stated already, it could be a damaged or loose LCD ribbon cable or the LCD screen itself is damaged. As to what exact component, there is no way to tell.
How can I retrieve that important information? (Contacts & To Do List)
Make a backup of the device in iTunes before taking or sending it in for service or before you decide to open it up (if you do happen to go that route). See here what is included in the backup of the device.
iTunes: About iOS backups
If you get a new or replacement device you can restore it from that backup.
Have you got any suggestions/tips for me?
As I have already stated numerous times, try taking it into your local Apple Store and see if there is anything can do for you such as swap it out. Remember that they are not obligated to do so since the damage is technically accidental. Be kind and polite when explaning what happened. You never know what could happen!
B-rock

White screen of death from game. And a new game not working at all

My iPod touch 4th gen has been getting the white screen of death when I try to play plants vs zombies why does this keep happening and is there a way to stop it from happening again?
And I recently installed fruit ninja and it won`t work at all it opens but it just says loading and then it crashes and I've tried running it in safe mode and it still dies the same thing what can I do to get the game to work?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My iPod touch 4th gen has the white screen of death and won't connect to iTunes to restore.

I was updating from iOS 6 beta 1 to beta 2 when my ipod froze up and started showing the white screen of death. I've tried the trick where you hold the power and home button for ten seconds and tried to put it in DFU mode to restore. None of these tricks work and my screen is still white. Also I plug it into my Windows Vista computer with iTunes 10.6.3 but it wont show up. I really need help. I don't have warranty or money to buy a new one. My grandmother will heartbroken if $200 goes down the drain.

Im not developer and I have ios 6 click this link http://www.youtube.com/watch?v=kHvf6Wty0nk&feature=plcp but anyway try putting it into dfu

My ipod touch 4th gen. is stuck on white screen of death.

I recentally had dropped my ipod touch and when i picked it up it was stuck on the white screen of death. I tried to hard restart by holding down the power and home button at the same time, but the screen would only turn off then come right back on. Then i let the power drain. After it would no longer turn on i put it on the charger to find that the white screen would pop right back up. I didnt want to restore it but because its my only option i put it on my compute but itunes couldnt acess it because i had a passcode on it. is there a differnt way to restore it or fix it? HELLLPPP MEEEE!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod Nano white screen of death - RESURRECTED! :D

Alright, here's the deal...A friend of mine has a new iPod Nano and gave it to me because it had stopped working, and was hoping it was worth something to recover. Sorry about the long story!
It _wouldn't_ turn on. But, when connecting it to the computer via the USB dock cable, it comes on for a few seconds on a grey-whitish screen. Then turns back off, reboots, and tries again. Step 1 step 2. Nothing.
Although, 'Diagnostics mode' or whatnot it is, does work however. It would still be a faint grey screen, but whiter and more vibrant, as if it's saying "Hey, I'm alive! I'm alive!!!" and I can go through settings and make it (sometimes) change colors, and reboot the iPod.
I was thinking since iTunes never recognized it (It was plugged in the whole time) that I would drown in just for the sake of it.
Well, 3 hours later after attempting to kill the poor thing, it... resurrected itself.
I'm serious, it really seems to have unbelievably done it. When turning it on, I get 2 beeps, but no restart loop, the LCD stays on the white screen though, BUT, here's the good thing.
NOW, I hear the system 'click' sounds when using the buttons and such that it's going through the menu, good news so far! It seems like it because after the 'boot' sequence (it appears to boot very fast, strangely).
The good thing is (kinda) https://discussions.apple.com/thread/1517571?start=0&tstart=0 ... So I suspect that somehow, this method of submerging it under water, letting it dry, blowdrying it, and then leaving it in the heat, somehow restored the SD chip inside of it... possibly only for now... I'm going to use this moment to hopefully get all data off the device, and see for one last time if it's fully restorable...
I have the power! Ok, so I hooked it up to the wall charger (just put the wall connector on the USB cord) and it now beeps two times, and after about 30 seconds or so, I get to the main menu, screen still white, but I can certainly hear the click letting me know I'm 'navigating' the iPod. It doesn't appear to have any music on it, or maybe it does, but I need to connect some earphones first. Or, it supposed to be display the 'sad iPod' icon, but I just don't see it, therefor, I'm blind as to the status of it.
I likely guess it's the battery, since every time I disconnect it, it goes dead. Yep, just looked back, still on. Yep, still menu clicking. Yep, I can start it with no problems now. Any clue what I can try to do to resolve this? Obviously it's turning on, and it seems to be doing something, it boots, (apparently) so that's a good sign.
Please, is there any hope at all in this iPod? At all?
AND, IT JUST BEEPED 2 TIMES AGAIN! And I was just typing... why did it do this? (Funny thing is, how it still works!) Is that really the menu button clicking? That would explain it, I mean it only plays the menu clicking sound AFTER about 30 seconds of it 'booting' to the iPod firmware, so it obviously has some sort of life to it. If I hook up my earphones... Holy Mac! I hear music! It's alive!!! It's alive!!! Oh my man!!! Yes!
It has hope, in a way!
Atleast, I hope, but it works! Freaking amazing! Jamming to some awesome beats right now, some cool hip hop, sound quality you ask? Great, actually! I don't know how, don't want to know, but it seems trying to kill this iPod actually resulted in it being resurrected? How? Who knows! This is awesome! iPod truly CAN have 2 lives, I guess!
Cool stuff, I swear on that! My favorite song was on here too!
How to adjust the volume on the iPod Nano? I don't care, it's playing at full volume, and it's awesome!
The sad thing is, it still has the white screen of death, and the battery is apparently fried still (or needs a good 24-hour charging).
This iPod has been sitting dead as a dud in the storage room for a good 1 year or so, unused. And now it came back to life in a flash. Unbelievable.
I love you Apple.

Your problem was moisture. It was wet inside and sitting around for a year let it all dry up.
If you get this kind of thing happening, speed the process up by putting the iPod into a zip lock baggie with a dessicant (you know those little silica pouches) or even some rice to absorb the moisture. Let it sit for a few days and it should dry it all out.
i

How to deal with the "white screen of death"?

My 1 hour old iMac (27 inch i5) just died. I had used it for less than 30 mins when it downloaded an OS update and rebooted. Then it refuses to boot, stuck in a white screen.
After that I slid in the recover disk and used the disk utility to restore the HDD as in the recover manual. It then spent 30 mins recovering,. However, on re-start it is still stuck in the white screen of death.
What do i do now?

Hi anerjee;
With a brand new Mac, personally I would not mess with it. I would take it back to Apple and ask them to fix it.
Allan

Nokia 6234 Startup White Screen Of Death

Similar Messages

Maybe you are looking for