Nokia 6280 and errors with iSync

I have purchased a nokia 6280 and paired the phone to my mac. I am wanting to sync my address book and calendars from my mac to my phone.
I can send individual cards from Address Book by selecting the card and then going to CARDS>>SEND THIS CARD. When I try to sync using iSync 2.3. I receive the message
[Nokia 6280] Connection to the phone failed.
Please make sure that your phone is turned on. If this error occurs again, please restart your phone.
Device "Nokia 6280" synchronization failed
My phone does not promtp me to accept a connection. Any suggestions?

Hi hobitton,
I have had this problem before and i took it to a nokia service centre, i told them to clean it and also i told them if it was common, they said it was very common and the man said it happens to all the 6280's (mostly), then he cleaned it for me, i think i know how to clean it but i have NEVER cleaned it myself because i don't want to void my precious 24 months warranty but i'll give you some advice, NEVER try to clean this phone even if you had a solution NEVER clean it.
Nokia N95
V 20.0.015
0546553

Similar Messages

I'm new to iPad mini and uv I'm trying to get a movie I purchased to where I can watch it offline but when I click the option to download and watch offline it keeps giving me and error with download try again later I have a good wifi connection ??

I'm new to iPad mini and uv I'm trying to get a movie I purchased to where I can watch it offline but when I click the option to download and watch offline it keeps giving me and error with download try again later I have a good wifi connection ??

You have a "good WiFi connection". What does that mean exactly? Can you send and receive email and are other internet related activities working OK for you? Have you tried restarting or rebooting your iPad? Sometimes that helps. If nothing else, it's a good place to start.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Nokia 6280 wont pair or isync

Ok I am trying to set up my new nokia 6280 with bluetooth and isync. When I go to bluetooth and select "Set up new device..." It says looking for device, find it then goes to "Gathering infomation about this phone.." and just hangs there.
Normaly I would then get prompted on screen with a pair code and asked to put it into my mobile but it never gets that far.
Anyone got any ideas?
I'm running isync 2.2 the mobile is RM v3.65 the latest from Nokia. I should accouding to the isync page be able to do calendar and address book with the phone as I have been about to with my Nokia 6230 for over a year now.
Any help would be great!
Thank you in advance!
..Raven..
PS. I have also tryed to pair the computer from the phone and it find the mac but then says passcode but I have not set one up? HELP!
G4 Quicksilver Mac OS X (10.4.6) Dlink bluetooth adapter

Okay got the answer. It turns out it's the bluetooth adapter on your mac that's causing the problem. I had a dodgy USB bluetooth dongle from Indonesia that worked fine with my old Nokia 6600 but didn't work at all with the 6280.
But now I've plugged in a different model bluetooth dongle it works. I found the reasoning behind it here from this discussion here: http://discussions.apple.com/thread.jspa?threadID=454430&tstart=15
Apparently it's some sort of standards conflict.
Good luck getting yours to work Raven!

Nokia 6280 and NSU support: the final request

I've decided to write this because it's extremely shameful that still now, more than 2 years after its introduction on the market, the 6280 hasn't an official update support, only due to the damned problem with the update from firmware version 3.40.
Is it so difficult to implement into NSU a system of firmware version recognition, and, in case, to block updates for phones with that version installed?
I continue not to understand this strange policy towards certain phone models, that obliges users to apply to unofficial, and illegal, upgrade methods (that work perfectly, if correctly used!)
I hope that, with the release of the next firmware package 6.60 (if it'll be EFFECTIVELY released, instead of inserting false version numbers in the section "Can I update" of the upgrade page - see this /discussions/board/message?board.id=swupdate&thread.id=29440&view=by_date_ascending&page=1 ) you're going to correct this lack of availability.

Ok so we cant help him but sometimes its good to let off steam, especially as his Nokia fone has been such a disgrace. I hope he reflects on his previous Nokia purchases , and when it comes time to upgrade he chooses a Nokia product. Its also good to keep in touch with customer service elements of Nokia, as this is just, if not more important than the actual product. If customer service is lacking then where is the confidence in buying with confidence !!
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

Cannot sign - get and error with "Sign with Certificate"

I am trying to sign a document using "Sign with Certificate". I have created an electronic signature. I click the button that says "sign with certificate". I then drag and draw the signature box. The pop up the appears with a place to "save" the signed document. I navigate to the proper folder and then I name the document. When I click OK, I get and error that reads "there was an error when attempting to commit this signature. the document was not saved. the file may be read-only, or another user may have it open. Please save this document with a different name or in a different folder." I then tried to re-name the original document. No luck. I then printed the original document to a new pdf and tried again, no luck. I tried to save it to a different folder, no luck. I tried to save it with a different name, nl luck. I restarted the computer and tried again, no luck. what should i do?

No. I am solo and doing this on my stand alone PC, I do not have any of those platforms that you mentioned. BTW, because of another technical glitch, I only recently – within the last month - re-installed Adobe on my local machine
jcc
John C Carrozzella, MD
Phone: (813) 659-2897
Fax: (888) 552-7536
Email: <mailto:[email protected]> [email protected]
Web: <http://www.hormonesandwellness.com/> www.HormonesAndWellness.com

Nokia 6280 and dial-up

Hi all, I'm trying to configure my MBPro and 6280 so I can dial my ISP. When I try and connect (using varies settings ie modem script, ignore dial tone etc) I get the error 'No carrier detected. Please check phone line connection and try again.'
The phone is paired and syncs ok via iSync. The phone works ok in the Address Book and I can connect via GPRS ok.
Any help is appreciated.
Shannon

I'm having the same problem.
I found one program that can solve it, but it costs about 90 euros. Launch2net. I tried the demo version and it works fine, all though via Bluetooth, which slows it down to 480kB/s.
I'm still looking for a free solution, or at least a lot cheaper, but maybe it helps you.
Julius
MB 2.0 Mac OS X (10.4.8) Nokia 6280

I am getting and error with a panel in CS6 with configurator

I get the zxp file to load into CS6 but I keep getting this error when I try to use anything IOError, "File or folder does not exist"
I have built tons of panels in the other versions of configurator, but I am inporting one I did in version two and converting it. This is driving me nuts.
Can anyone tell me where I am going wrong with this.

You email is blocked. Just find it.
1. The gpc file in you zip archive is not valid. It is not a text file, but a binary file.
2. For the error "File or folder does not exist", I think it is because the jsx file cannot be found. There is a global variable "assetsPath", which points to the assets folder. You can evaluate a file by
$.evalFile(assetsPath + "/LTS_Select Folder Of Images.jsx");
If the panel is exported as "CS Extension" by "File->Export Panel As CS Extension", the jsx file does not locate at app.path.toString() + "/Plug-ins/Panels/Touch Flow/content/Touch Flow.assets/". Therefore, the jsx file cannot be found after click the Script button.
The variable "assetsPath" works when the panel is exported as panel or exported as CS extension.

Post upgrade to Mountain Lion - no access and error with IPhoto

Hi, I work on MacBook Pro 17 inch with operating system OSX 10.8.1. Since I have upgraded to Mountain Lion, I am unable to access IPhoto. Whenever I enter the programme through the icon, I receive start up message stating 'updating thumbnails'. After about 2 of minutes, it crashes and I receive error message as below. What do I need to do fully operational IPhoto?

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp980#DriversAndSoftware.

Nokia E71 plugin incompatible with iSync 3.1.0 / Snow Leopard (OSX 10.6.1)

After upgrading to Snow Leopard the calendar sync has stopped working towards my Nokia E71.
However, when disabling the calendar sync option , the contacts are syncing just fine.
I wonder if there'll be a fix for this in the near future? When contacting Nokia support, they tell me to contact Apple, because Apple are making the E71 plugins for iSync.... (is this really true?)
Have tried "everything" in the Apple support site. The only result from that was that after resetting the sync preferences via Sync Diagnostics, the whole sync process crashes midway.

It's more than likely some corruption has occurred in one or more of your calendars. iSync Plugins that worked in Leopard should continue to work in Snow Leopard.
Only sync individual calendars until you find the one that causes the sync to fail. Then export that calendar from iCal (File > Export), delete it from iCal and re-import (double click the exported .ics file). This often fixes corrupt calendars.
Apple are making the E71 plugins for iSync.... (is this really true?)
No. Nokia make the plugins that they provide from their site. Apple make the iSync application.

Nokia E6 and difficulties with 2G and 3G connectio...

Hi,
I have Nokia E6 with Nokia Belle Refresh newest version 111.140.0058
I live in Helsinki. My summer cottage is in Mikkeli. Both my house and my summer cottage are in an area where phone network connection changes between 3G and 2G regularly. This is problem with E6. Always when network connection changes from 3G to 2G and I have an open phone discussion my phone either stops the connection totally or I can hear the one who I am speaking with but that person cannot hear me. This is discusting. And what is even more problematic, in my summer cottage where 3G is weak, the connection always changes to 2G after I start calling to someone. I.e it is very difficult to call there.
It did took me a long while to identify the problem why my calls are ending but now I am convinced this is the reason. I think this is bug in software. I hope Nokia could still do something with the bug when there still are working someone who know symbian.

In settings, connectivity, network, change the network mode to either gsm or 3G, look for better signal one, don't select dual mode.
Hope this helps.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Nokia 306 and problems with Nokia Store

I used to download apps from Nokia Store via SMS, but as you know that has now been cancelled, so I have tried to connect via my cable link through my PC, but although Nokia Suite recognises the phone, the Store acts as though it's not there and the buttons to "Download Via PC" and "Download Via Phone" are just grey and inoperable, does anyone know what I'm doing wrong, am I just having a thick moment or is there something I need contact Nokia about
Thanks in advance

Which browser are you using? The Nokia Suite needs to install a plugin to your browser to push the app to the Nokia Suite. Try using firefox.

Installing Oracle 10g and error with DISPLAY value

Hello, I am instaling Oracle 10g and when I run:
. /runInstaller
this error apear:
Can't connect to X11 window server using :0.0 as the value of DISPLAY variable.
how must I set de DISPLAY variable if I have instaling in a local system?
Thanks

Can't connect to X11 window server using :0.0 as the value of DISPLAY variable.you apparently set the display correctly (:0:0) if you are installing locally.
You could do a xhost + as user531326 if you did not start your X session as oracle
Message was edited by:
Laurent Schneider
note that xhost + is not a good security practice, have a look at
http://amath.colorado.edu/computing/unix/x/

NOKIA C5 and problems with OVI and Windows 7 64Bit

The phone does not recognize OVI (latest version).
The S.O. and 64-bit Windows 7!
I read on the Internet that several have the problem and find it shameful that Nokia has not been involved for months!
Riccardo
Solved!
Go to Solution.

problem solved by downloading from the internet utime 'Update SW'!
But 'those who have no internet on your mobile phone as OVI discharge that you can not' connect?
Greetings
Richard

Combined Billing Frustration and Errors with no help from AT&T

I recently had combined billing for my home phone, dsl, and wireless. I upgraded to U-verse and did not know that my old account would be cancelled and everything would be seperated out to individual bills once again. So here I am with three bills, my old combined billing, U-verse and wireless account. I paid my all three of the bills the first time. The second time the combined billing was just for a few days but I noticed that the previous payment that I had made for my wireless account had not been posted which I paid through my combined billing account. A few days after that, they shut my mobile phones off. I had to pay the bill twice to get my bill turned on. I stayed on the phone with AT&T for about two or three days. I am so frustrated with them and when I call all they do is transfer me back and forth from department to department when all I want them to do is transfer my payment to the right account so that I won't be out of an addiitional $300.00. I wish that I could cancel service with them but they are the local phone company in my area. Has anyone else had any problems like this with AT&T if so please advice me on what I need to do?

Hi there! @desireaw83 thanks for posting your concerns. I’m so sorry to hear you’re having issues with your billing. We’ll be happy to get you in touch with the group that can handle this. please private message me by clicking here and provide your name and a good contact number.
We will follow up with you within two business days.
Thanks!
Charise

Error in sync between macbook pro and nokia 6280

hello, i just bought my first mac, and I am trying to sync with isync between my phone nokia 6280 and the mac wihout any success.
my mac is empty and most of the information is on my phone.
i try to reset sync history and to restart my phone and many things from the support site but it didnt help.
when I start the sync for the first time, in the beginning it looks good but than close to the end there is a massage problem with "inconsistencies in your sync information for.... and have been repaired.... the next sync...... may take longer..."
and than when i try the second time i get the error "synchronization failed... an unexpected error occured"
please help me
thanks alot Ohad

I dont really understand the way I suppose to do it, and the thing is I want something I can do once in a while. there is no change to work with isync and my nokia 6280.
thanks for your time

Nokia 6280 and errors with iSync

Similar Messages

Maybe you are looking for