Nokia 6280 and NSU support: the final request

I've decided to write this because it's extremely shameful that still now, more than 2 years after its introduction on the market, the 6280 hasn't an official update support, only due to the damned problem with the update from firmware version 3.40.
Is it so difficult to implement into NSU a system of firmware version recognition, and, in case, to block updates for phones with that version installed?
I continue not to understand this strange policy towards certain phone models, that obliges users to apply to unofficial, and illegal, upgrade methods (that work perfectly, if correctly used!)
I hope that, with the release of the next firmware package 6.60 (if it'll be EFFECTIVELY released, instead of inserting false version numbers in the section "Can I update" of the upgrade page - see this /discussions/board/message?board.id=swupdate&thread.id=29440&view=by_date_ascending&page=1 ) you're going to correct this lack of availability.

Ok so we cant help him but sometimes its good to let off steam, especially as his Nokia fone has been such a disgrace. I hope he reflects on his previous Nokia purchases , and when it comes time to upgrade he chooses a Nokia product. Its also good to keep in touch with customer service elements of Nokia, as this is just, if not more important than the actual product. If customer service is lacking then where is the confidence in buying with confidence !!
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

Similar Messages

  • Nokia 6280 and errors with iSync

    I have purchased a nokia 6280 and paired the phone to my mac. I am wanting to sync my address book and calendars from my mac to my phone.
    I can send individual cards from Address Book by selecting the card and then going to CARDS>>SEND THIS CARD. When I try to sync using iSync 2.3. I receive the message
    [Nokia 6280] Connection to the phone failed.
    Please make sure that your phone is turned on. If this error occurs again, please restart your phone.
    Device "Nokia 6280" synchronization failed
    My phone does not promtp me to accept a connection. Any suggestions?

    Hi hobitton,
    I have had this problem before and i took it to a nokia service centre, i told them to clean it and also i told them if it was common, they said it was very common and the man said it happens to all the 6280's (mostly), then he cleaned it for me, i think i know how to clean it but i have NEVER cleaned it myself because i don't want to void my precious 24 months warranty but i'll give you some advice, NEVER try to clean this phone even if you had a solution NEVER clean it.
    Nokia N95
    V 20.0.015
    0546553

  • When will Lightroom and Elements support the Nikon D600?

    When will Lightroom and Elements support the Nikon D600?  In the meantime is there a workaround so the D600 raw files can be exported to Lightroom or am I simply out of business until Adobe develops the needed patch?
    As best as I have been able to figure out I may as well rebox the 600 and go back to my older, supported camera, until whenever.

    A: What were you using before your precious D600 showed up today.
    A D90 with good glass.
    Nikon 70-200 f2.8, Nikon 24-70 f2.8, Voigtlander 58 f1.4, Tokina 11-16 f2.8.
    Now I need to get a good FF wide solution for the D600.
    Trigger on the D600 is much more stiff than my D90 so I'm having to press down a bit harder to get the AF confirmation. Just need to get used to that I guess.
    FYI, JPG files right out of the camera are looking good.
    B: Don’t you think Adobe wants to sell you the next generation product/upgrade to accommodate all of our insatiable photographic pursuits???
    I had been using Apple's Aperture and switched to Lightroom a couple of months ago. I thought the price was actually quite fair for the power of the LR software. I did have to updgrade my computer's RAM....
    C: Have a nice glass of wine tonight and enjoy your $2K investment. I’m personally looking forward to savoring a next generation photographic paradigm.
    We did enjoy some vino last night! I was thinking I would possibly jump ship to Sony A99 and just switch to all Zeiss glass with autofocus, but I'm not convinced that the EVF is for me, and I'm really not a video shooter, mostly just landscape and real estate. Also, I the Sony turned out to be priced a bit too high for me personally in comparision to the D600.
    Buenos Dias!
    EB

  • TS3694 I just received the unknown software error (6) do you have a resolution for this issue?  Occurred after install of software and firmware in the final validation phase. I have a 4S

    I just received the unknown software error (6) do you have a resolution for this issue?  Occurred after install of software and firmware in the final validation phase. I have a 4S

    http://lmgtfy.com/?q=iPhone+error+code+6

  • Is there a solution to open the network locked iphone 6 Ali Sprint I've purchased iphone 6 from ebay and upon arrival I have to drag the device is locked and not supporting the network in Saudi Arabia

    Is there a solution to open the network locked iphone 6 Ali Sprint
    I've purchased iphone 6 from ebay and upon arrival I have to drag the device is locked and not supporting the network in Saudi Arabia

    There is no solution other than to contact Sprint and ask them if they will unlock it.

  • How do you erase and reinstall a hard drive without a disc? I bought this mac book pro under a year ago and am pretty sure i downloaded mountain lion from the app store. Basically Im having startup issues and this is the final step Ive reached

    when I start my laptop it loads a third of the way and shuts down automaticallyI've tried to safe boot, repairing discs and clearing RAM but nothing has worked. basically I've come to the final step of having to a erase my hard drive and reinstall mountain lion however Apple support suggest that I install from a disc however I installed mountain lion from the App Store. can anyone help me go about this?

    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Cannot view the detailed Email date and time about the meeting request

    Hi,I am unable to view the detailed message and Date and time of a meeting request in the default Email app in my Sony Xperia P mobile. Even when i select the calender it does not defaultly go to the meeting date. I need to manually select the date to see the meeting. I cannot see the meeting details without accepting it.I have seen the better behaviors on HTC One V and Galaxy Nexus where full meeting details including message, Date, time, venue appears in the meeting request message.Is there any setting which needs to be changes or is it the limitation of the phone app.Regards,Pratik Ranjan

    Hi Johan,Im also seeing this on my xperia s, ICS.  Here's some additional info i have after some testing:Work have Exchange 2010, I have sent calendar invites from outlook 2007 and 2010 clients and it works for the 2007 clients as it automatically adds the meeting details into the body of the request, something it doesn’t do in 2010, so it may be the way the calendar form has changed in 2010.   It also works fine when i get an invite from an external person.This however is just adding the text into the body, I too have tested with the HTC One S and Samsung Galxay S3, bith use the stock email and both display the time as part ofthe invite no tin the body of the invite,
    In doing the testing I have also found another issue. I have found that it doesn’t inform you of a calendar conflict.ThanksMike

  • How do I downgrade to Firefox 5.0 I run trend Micro and that supports the toolbar for trend micro

    trend micro support told me they only support version 5.0 with there toolbar

    Firefox 5 isn't supported any longer, it is 3 versions behind the latest release. Tell Trend Micro to wake up and get with the Firefox Fast Release schedule or just stop providing extensions for Firefox.

  • I am trying to download the iTunes 10.7 update so that i can update my ipod and just before the final part of the download starts the program stops and says, 'The installer enountered problems before iTunes could be configured'    What a i doing wrong?!

    I am trying to download the iTunes 10.7 so that i can update my ipod. Just before the final part f the download starts the program stops and says, 'The installer encountered problems before iTunes could be configured'
    What am I doing wrong?!

    I am trying to download the iTunes 10.7 so that i can update my ipod. Just before the final part f the download starts the program stops and says, 'The installer encountered problems before iTunes could be configured'
    What am I doing wrong?!

  • SCSM 2012 - Portal - Is it possible to exclude Closed Requests and Incidents from the My Requests view

    Some users have complained that they see to many in the My requests view and there isn't a requirement to see closed requests.
    Ideally I would like them to be Listed by Status as default rather than Type and then be able to order the status as I wish - i.e. I want active alerts first, In Progress next, then resolved and lastly closed.

    As far as I know this is not possible with the built-in SCSM portal. Neither the Silverlight webpart can be modified nor are there any settings to configure the webpart for requirements like you described. 
    Andreas Baumgarten | H&D International Group

  • Why do I get a loss of quality video when placing titels or grading in FCE. Even after rendering and saving to the final product? The video starts to get shaky

    Whenever I place a title in my video in FCE, the part where I placed it losses its quality. Its getting shaky and blurred.
    Even afther rendering and saving it to the final end product. The same problem occurs when I'm collor grading. I use the internal tools for titels and grading of FCE.

    and some more specs;
    My systsem >>
    IMac 3.06 GHz Intel Core 2 Duo
    8 GB 1067 MHz DDR3
    clips and master on Imac
    Scratchdisk on  external disk with  firewire 0.8
    On both disks I have more tehn 0,5 TB geheugen left
    Videocamera HF 100
    Imported clips >>
    - FXP 17 Mbps
    For RT I use >>
    - RT Unlimited
    - Playback Video Quality high
    - Playback framerate high
    Videoclip =
    - videorate 25 fps
    - framesize 1920 x 1080
    - compressor apple intermediate codec
    - pixel aspect square

  • Nokia 6280 that restarts all the time

    Hi i have a nokia 6280 with firmware v 03.60 (10-02-06) but the phone restarts alot.
    Do anyone also have this problem ?
    know how to fix it ?
    Anyone know where to get software to update the firmware on a phone ?

    go to your nearest nokia service centre they will update the firmware for you
    Nokia N95
    V 20.0.015
    0546553

  • Issue with cisco prime adding aceess point in the map and move in the final position

    I have an Cisco Prime infrastructure with a 2.1.1 version, I created a new campus, a new building, a new floor after that i want to add access point in one floor i can add 4 access ponit but in other one floor I add first 3 access points successful bunt when i try to add a new access point in the same floor tha access point it is added but I can not move it to the final possition on the map.
    the cisco prime shows the followging message
    Cannot find feature by (Mac/Name/ID) null
    how can I move the access point into the last possiton ?

    Duplicate post. 
    Go HERE.

  • Nokia 6280 and dial-up

    Hi all, I'm trying to configure my MBPro and 6280 so I can dial my ISP. When I try and connect (using varies settings ie modem script, ignore dial tone etc) I get the error 'No carrier detected. Please check phone line connection and try again.'
    The phone is paired and syncs ok via iSync. The phone works ok in the Address Book and I can connect via GPRS ok.
    Any help is appreciated.
    Shannon

    I'm having the same problem.
    I found one program that can solve it, but it costs about 90 euros. Launch2net. I tried the demo version and it works fine, all though via Bluetooth, which slows it down to 480kB/s.
    I'm still looking for a free solution, or at least a lot cheaper, but maybe it helps you.
    Julius
    MB 2.0   Mac OS X (10.4.8)   Nokia 6280

  • Nokia e72 and where did the memory go????

    New Nokia e72, after the disappointing Nokia E75 i really didn`t expect Nokia to release another unfinished phone!
    Dont get me wrong, great Phone the E72, solid hardware, but it has the same memory problem found in other nokia devices. 42 M at start up. Tried to go on the internet with the build in browser, 2 big flash sites like CNN and sadly the memory was down to between 356 K to 1 M, and the phone didn´t react anymore. After shuting down the browser, the E72 had 42 M in free memory again. It's the same story when using Spotify or Youtube. 
    Is there any one else with the same problem?  What will/can Nokia do about it?
    Best regards

    I am using the program PhoNetInfo to check for available RAM.  Find it at http://www.patrickfrei.ch/phonetinfo/index.html.  Not sure if there's an easier solution?  You will need to follow the instructions to have it signed at http://symbiansigned.com for it to work.
    As for the main thread, I am using an E73, which is basically the same as an E72.  Memory was one of the shortcomings I knew about when buying the phone, but so far I have hit only one browser "Out of memory" error.  Guess the sites I use either have a mobile version or simply aren't so memory intensive?  But I might look at this problem from the other perspective.  Unless they're loaded with pictures, web sites that trigger "Out of memory" are probably obscenely FAT!  I marvel at the design of certain modern web sites.  It's as if the programmers get paid by line of code, or are in competition to win this year's Rube Goldberg prize, for the most unnecessarily complicated invention.  Try downloading such a web site over a dial-up connection.  In this case, the problem is totally different, but the resulting frustration is the same.  And IMHO, the cause is the same: BAD DESIGN.  Simpler is better for visitors and both cheaper and easier to maintain.
    Has anybody tried the Skyfire?  While it likely has some problems of its own, I assume it will work around a straightforward "Out of memory" error...because it's not a real web browser?

Maybe you are looking for