Nokia 6280 Voice Dialing

Hi Wong here,
Can any one help me on Nokia 6280.
How to make a voice dialing call.
I try it by pressing the right button, it show me Voice system Error.

Sometimes it helps to change the phone language to non-english and then back to english.

Similar Messages

  • Nokia 6280 Voice Dialing Problem...Help

    Can anyone tell me how to make a voice call?
    I try to press the right button and show me Voice System Error.

    Hi,
    My 6280 is a V 03.81 firmware, used in French language.
    I did not experience your own problem, but I have another one.
    When the phone voice repeats my command, the volume of this voice is very low and almost unaudible.
    I did not find the solution to fix this prolem.
    Has someone an idea ?
    Thank you for help.

  • Nokia 6280 and dial-up

    Hi all, I'm trying to configure my MBPro and 6280 so I can dial my ISP. When I try and connect (using varies settings ie modem script, ignore dial tone etc) I get the error 'No carrier detected. Please check phone line connection and try again.'
    The phone is paired and syncs ok via iSync. The phone works ok in the Address Book and I can connect via GPRS ok.
    Any help is appreciated.
    Shannon

    I'm having the same problem.
    I found one program that can solve it, but it costs about 90 euros. Launch2net. I tried the demo version and it works fine, all though via Bluetooth, which slows it down to 480kB/s.
    I'm still looking for a free solution, or at least a lot cheaper, but maybe it helps you.
    Julius
    MB 2.0   Mac OS X (10.4.8)   Nokia 6280

  • Best Nokia for Voice Dialing?

    I have the 6300 and find the voice dialling all but useless. Neither do I need a voice tag for every contact. Assuming that Nokia do not intend, by means of a F/W update, to allow users to either disable the VD or record their own tags then can anybody suggest a suitable replacement for the 6300?...preferably one where I can record my own tags for about ten contacts or less. Or perhaps if I could erase the tags on all but the contacts I want...that might help.

    The older phones such as the 6230i uses tags. Nokia for their own reasons switched the newer phones from using tags to SIND. Hence, I don't think they will be switching back to using tags. It is more likely that they will continue improving SIND.
    It was a little messy at the start but within a couple of days I was getting reasonable results. 

  • Disable voice dial on Nokia 6263.

    I have an Australian accent, so the voice dial feature is about as useful to me as a cardboard umbrella. Unfortunately it seems that even after turning off every voice-related option I can, if I nudge, knock, brush, or even press the button on my headset to turn it off for to short a time it will decide "oh, that's a tap, he wants to voice dial".
    It's worse than having a 5 year old who's just discovered how to speed dial.
    I want to gut, eviscerate, eliminate, disintegrate, annihilate, and disable with extreme prejudice every jot, tittle, pinch, hint, or skerrick of support for "voice dial" in my Nokia 6263.
    Am I SOL?

    atti wrote:
    Well, i have a nokia 5310, i had the same problem, call some of my contacts couple of time a day.
    But my voice dialing activation key is not the volume but the clip button on the wired headphone, or the one on the top right.
    I did lots of research on this, I don't how to diable this, and find it work(stop random calling my contacts) by myself if I lock the phone with a security key activated. Once the keyboard is locked, you can not dial unless you insert the security key.
    <how to activate the security key>---main menu---->setting---->phones setting ----->security keyguard on------->setup your security keyguard. If you don't want to activate your security keyguard, you can turn it off any time. Also, change your security code by going to  main menu---->settting---->security---->access code---->change security code.
    Cheers!
    I also have a Nokia 5310 and was having the same problem.  I found that after I reset the phone settings (menu>settings>Rest.factory sett.>Restore settings only), when voice dialing is activated, the phone activates the "train voice recognition" feature instead of actually doing any voice recognition/voice dialing.  The phone just sits there and waits for user input.  I'm not sure if the 6263 has a "train voice recognition" feature, but if it does, this may work for you.

  • Nokia N96, Bluetooth, and voice-dialing....

    Hi,
    I upgraded from my N80 to an N96 and, being a rep and frequently on the road, Im finding the voice-dialing to be a real PITA.
    The N80 would work just about anywhere. Car, street, pub, shops, wherever, it understood who I wanted to call. Not perfect, but close.
    The N96 doesnt even PRETEND to understand me, throwing up any name at random it seems.
    Worse, it is all very haphazard to use.
    You press the top right function button and hold it down. On the N96, you could hold it for a very long time before it responds. Since the processor in this phone is way underpowered, it a second or two before your hear the Speak Now confirmatory beeps.
    Couple that with the problem that many Bluetooth headsets power-down momentarily, it means that when youre driving along in the car and hold the button down on your BT headset, you dont actually hear the beeps. So you have to look down at the phone to see what its doing. While driving, this can be dangerous.
    Now, because you ARE driving, the N96 is not likely to understand you anyway.
    Nokia!! You need to go back to the drawing board here!!
    1) Fix the voice-dial activation - pressing the top-right button for two seconds is plenty.
    2) Play the bleeps WHEN the Speak Now screen comes up, not before! My N96 can take anywhere between 1 and 5 seconds between the bleeps and the Speak Now screen appearing!
    3) Play the bleeps a bit longer when the Bluetooth headset is activated. Most Bluetooth headsets take a second or two to wake up - the sound is over by then and you miss it.
    4) Go back to the N80 and read the code for what you did in that phone. It worked fine there!
    Ian Nicholson
    Poor Sod/N96 Owner
    Nokia: Connecting People... with iPhones.

    Still here is no improvement with voice dialing with ver 12 soft and training sessions to n96.
    It handles well with some names, but not with most. My old N95 did it much better from beginning (no training need!).
    And extra case is with bluetooth HF - I stopped for waiting now for this stupid "beep" that is coming or before or after or in the middle the time, when voice detection screen is there. Now I just try to say the name about 2 sec after pressing BT button.
    So, I hope some good Nokia engineer happens to read those voice dialing posts and in soft ver 13 we get better dialing (and finally somehow faster phone). Or do we, all who don't like extra slow processor should go in same day to service/operator and give in protest about the speed..

  • Nokia N95 - reset after activating voice dialing

    firmware 11.0.026 for EURO-3
    Every time I press and hold the right selection key to activate voice dialing, a short tone is played, Speak now is displayed, ... and unfortunately phone reset is executed.
    Does anybody have similar experience?Message Edited by slawmilcz on 25-May-200705:58 PM

    I understand that nobody else reports such a problem.
    I don't know what`s wrong, as I never succeeded in this operation.
    When "Speak now" is displayed and progress appears, phone reset is executed every time I try to activate this function.
    I'm not sure if it worked on the previous firmware version of my phone.
    It may only fail in firmware 11.0.026 with product code 0536074 (EURO3).
    Maybe I would have to try firmware 11.0.026 with product code 0534852 (EURO3).
    Is it completely the same firmware?
    I have found information that the product code is different for various colors of phone. Is it really the only difference?

  • Voice Dialing and navigating in the following drop...

    My new 6600 fold drives me mad! How can I navigate through the diiferent numbers/contacts when I use voice dialing via headset? The idea is: press the button on my headset, then talk a contacts name e.g. "Peter" (with or without thumbs in the nose). The phone recognizes my speech as "Peter" (with luck) and shows:
    1. a list with contacts who has "Peter" as name/first name (depending on what list format i use - why can the pone not shows both like in my "old" Nokia 9300?) and THEN?
    or
    2. a single contact and dial his number. But WHAT if this contact has more numbers?
    Solution: Take the phone out of the pocket, unfold it and navigate with the keys through the contacts/numbers? THAT I did not have in mind when I want to call somebody via headset. Is there an undocumented set of voice commands to navigate throug the menu? The manual is not really helpful for that.
    As workaround you can for case 1 say the complete name e.g. "Peter Tschaikowski" and talk a little bit more in a robotic voice for a better understanding (like i read in other posts here).. OK, this might work.
    In case number 2 I start to select one number as "standard" number who will select when the name is clear. But that is nit really helpfull if you want to talk to your mum/boss/girlfriend with a different number when driving a car. in my country it is not allowed to use the phone without headset in the car. For me it will be a expensive pleasure to use my 6600 fold while driving.....
    Message Edited by gurkenhals on 05-Feb-2009 03:28 AM

    I can't believe that I'm the only one with this problem. Nobody with an solution for this? :womansad:

  • Voice dialing and talking caller ID

    I bought the nokia n9 and while I am very happy of how it looks and feels and greatly disappointed for the lack of many necessary apps and features. The upmost important of which are the voice dialing and talking caller id.
    Will we ever see these features available to nokia n9? Maybe a better question would be: will nokia ever going to update this device to pack missing features or not?

    not at the moment.
    not too sure about what is coming in pr1.3 though...couldnt say if it will include voice operation...not that it is necessary.
    if nokia does indeed kill using the meego/harmattan os, the community will surely keep it alive somehow for a while.

  • N73 Firmware upgrade--- bad working Voice dialing

    I updated the firmware of my Nokia N73 from 268.0.0.3 to 368.0.0.1. With the older version delivered by the phone voice dialing worked. In the 268.0.0.3 I only could given voice command for the profiles not for the contacts. It didn't recognise any contact. Because of thos I decided to do the next firmware upgrade to 368.0.0.1 and now the voice dialing doesn't work at all. Each time I put the button to activate it tells me "fualty voicesystem"in dutch "fout spraaksysteem. Now it became even worser. Is there anyone who helps me out?
    regards

    16-Dec-2006
    03:34 PM
    conradus wrote:
    Thank you for your reaction. I put the firmware for the second time to my phone. Now it seems working again. When I touch the button for voice dialing it works untill then. But I may ask for every contact in my contactlist but nothing happens. When I touch the button again it is not reacting then but only the second time. When i asked for an other profile it sometimes works. In my contactlist it is possible to hear the contactname. But via voice dialing none of the contacts to choose.
    best regards
    Voice Dialling seems to be a bit choppy on most of the N-series models, because they use speech synthesis. Whereas this works for profile names, it's a different tackle for contact names. This is because contact names are assigned by assigned by you, the user. If you select Play Voice Tag for any given contact in your phone, it will output this name using speech synthesis. You will have to EXACTLY copy this output. And, if the name of a certain user is "John Doe Geralds", it wouldn't suffice to simply say "John Doe". You'd HAVE to put Geralds behind that, and in the EXACT same way as the device says it.
    The only way to change a voice label for any given name is to change the name itself. The same goes for profile names and commands, but I wouldn't change these as the defaults work fine.
    A reason because of which voice dialling may not work can also be found in the user's voice details having become useless for the phone. To correct this, go to Tools> Voice commands > Options > Settings and choose: Reset Voice Adaptations. Note that carrying this out means that ALL data collected about your voice shall be lost; you might have a bit of difficulty using voice features the first couple of times after performing this instruction. Beware to EXACTLY copy whatever the phone says, even though you know real-world pronunciation to be different. Until now, I haven't had to actually adjust the pitch of my voice to the synthesizer's pitch, but I know this would improve recognition accuracy.
    Oh yeah... Sorry for my late reaction!
    Best regards,
    V3.0704.1.0.1
    19-01-2007
    RM-133 Nokia N73(57.01) Product Code:0539338

  • Nokia 6280 failure restoring contact list using pc...

    Hello,
    I own a Nokia 6280. Firmware - v3.81
    OS: Win XP.
    I took the phone to my local phone provider(partner orange, from which I bought the device) to update the phones version. This action has deleted my entire contact list.
    Beforehand I made a backup using the pc suite back up feature, and the backup went smoothly. Now, when I try to restore my info using the restore function in the backup(content copier),it restores everything except the contact list. Somewhat in the middle of the resotration of the contact list, an error jumps saying the connection to the phone has been list. A few seconds later the connection restores automatically.
    I tried solving the problem using this thread:
    http://discussions.europe.nokia.com/discussions/board/message?board.id=pcsuite&message.id=7746&view=...
    But it didnt quite work
    What can I do to solve this problem? How can I restore my contacts?
    And if not, Is there a way to convert the Backup NBU file into Outlook VCF format?
    Best regards,
    Uri

    09-Oct-2006
    06:07 AM
    manta wrote:
    Make sureyour contacts are in the backup file )by opening the file with notepad and searching for a string you know will be in your contacts (like a friends name or a part of phone number etc.)
    I've got my entire contact list on the backup file.
    except notepad can't disipher the the names into english, and so cant hexedit's of their sort.
    Example from the notepad of the backup file:
    BEGIN:VCARD
    VERSION:3.0 /*jibrish should be the nemes*/
    N;ENCODING=QUOTED-PRINTABLE;CHARSET=UTF-8:׳’׳ ׳¢׳“;׳¨׳‘׳™׳ ׳ ;;;
    TEL;VOICE:*phone number*
    TEL;HOME:*phone number*
    TEL;HOME:*phone number*
    TEL;HOME:*phone number*
    TEL;WORK:*phone number*
    END:VCARD
    note. *phone number* replaced by me for confidentiallity.
    09-Oct-2006
    06:07 AM
    manta wrote:
    Then restore your phone with selecting restore factory settings in settings menu of the phone.
    Then try restoring again.
    I tried to recover the phone as soon as I recieved it from the phone provider with the new v3.81. That is , the manufacturer's settings were the default. Unfortunantly that didn't work.

  • Voice Dialing in Background

    Hi,
    Is it possible to use voice dialing to initiate a call in background? i.e. i'm driving along happily using nokia maps on my multitasking nokia smartphone. I decided to make a call while i am being directed to my location. The action of making the call via my headset pushes the maps app into background and the call into foreground. I then have to manually bring maps back as active forground app. This is a pain! Can I initiate the call in such a way that it loads in background or at best puts maps back in forground! hope u understand.
    Cheers

    Send feedback - http://apple.com/feedback

  • Voice dialing in different languages

    In my contacts, there are people from many different countries - their names are therefore pronounced in completely different ways. My E71 however pronounces (and recognizes) all the names according to just one language that is set up. Is it possible to somehow assign the language of voice recognition to each name separately?
    Thanks

    23-Sep-2008 12:09 PM
    nanagriel wrote:
    In my contacts, there are people from many different countries - their names are therefore pronounced in completely different ways. My E71 however pronounces (and recognizes) all the names according to just one language that is set up. Is it possible to somehow assign the language of voice recognition to each name separately?
    Thanks
    Hi,
    I believe this is not possible. Your phone will only work on the assigned "language" that you selected. But there are many different "Language Packages" that your phone can use which might help you in your Language and might help you with the voice tag as well. You can get them here-> Text To Speech Language Packages
    I might be able to help you with the "Voice Tag" name dialling though, here are some key points you can use with regards to Speaker Independent Name Dialing (SIND) that Nokia uses for all its phone. This is somewhat base on my experience.
    1) LET THE PHONE TEACH YOU
    listen as to how your phone's voice is pronouncing the built-in voice tag and try to mimic it, do this with the contacts the you always call, say from 3 to 5, or more depending on how much free time you have, the more the better (
    2) TEACH THE PHONE
    do the voice dial, as much as you can, the more that you do it, the more that your phone will also adapt yo your voice.
    3) BE CAREFUL HOW YOU WRITE THE NAMES
    if you have not noticed it, if you type the names is all capitals, like "ABN-AMRO" your phone will pronounce this contacts by letter, as in "A", "B", and so forth. Hence, you can actually experiment on how you are writing the names but still the key is how the phone says it, and you must mimic it as must as you can.
    hope this helps, it might not be perfect, but once you got the hang of it, it will work!

  • E65 voice dialing problem

    I realized that not all the contacts has a voice tag. Is this normal?

    Dear François,
    We should shout all together : ANY BODY FROM NOKIA THERE!!!
    I had this problem once again after having discussed with you. I am in Turkey. I experienced the problem completely the same as you described in your post both with English and Turkish languages on the phone.
    I think this is a problem of comptability of any of the following combinations; Phone Software / PC suite / Windows Vista / and, maybe, the silly Toshiba bluetooth stack I am bedly experiencing since I have changed my laptop for about 15 days ago. Before, it was a heaven with XP + Vidcomm bluetooth drivers.
    I will try to describe my environment parameters and what happens when, just expecting that somebody from Nokia may read and bring a solution to this problem as soon as possible.
    The voice dialing is dieing when you synchronize is with PC suite and try to reach text messages and calender on the phone through PC suite. The way I found to solve the problem is to turn off the synthesiser. Swicth the phone off and then swicth it on again and finally turn the synthisiser on. Here you are. It works and also with contacts. This feature is very important for me because I use this feature with my car kit since a while and I was really happy until I had this problem. It was a big comfort.
    My environment, if anybody from Nokia will be interested in:
    I synchronize my E65 with one Vista laptop, one XP laptop, one car kit (Parrot CK 3000) and one GPS device.
    E65 software version is 3.0633.69.00 06.02.2008 RM208
    PC suite versions I keep using 6.86.9.0 and 6.86.9.3.tur
    NOKIA PLEASE BRING A SOLUTION TO THAT PROBLEM !!!!!
    BR
    Yilmaz

  • N73 Voice Dialing - Poor pronunciation and volume

    The N73 is fantastic. However, the pronunciation of contact names is not clear English. "T's" Cell sounds like the beginning of chinese "thank you" i.e. "ts"ia tsia, rather than "tees" or "teas" cell. And, the command "General" is hardly recognizable since the r is very weak. Also, when I try to use voice dial with the Motorola IHF-1000, the sound is very, very weak ...and, mispronounced. The limited instruction in the handbook really don't cover how I can "retrain" the pronunciation. Please, any help fixing this issue would be appreciated. Cheers! David (1Sensei)

    The only thing I can think to suggest is that the voice recognition adapts to your voice, so keep trying it, and try the 'next' option, if it gets it wrong.
    I found it a nightmare to begin with on my N70, but it soon learns to recognise you
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Maybe you are looking for

  • A few issues with my new BB Bold 9700

    Hey, i have a few questions, i thought best to keep it to one thread. FYI i updated my blackberry software today using my computer so it all should be on latest versions 1: GPS never ever works, simple, ive run diagnostics, they time out, and i can n

  • Error - Balancing Line Item Profit Center not filled in Line Item 007

    Hi I am trying to do a transfer posting from one vendor account to another. However, system is giving an error - Balancing Line Item Profit Center not filled in line Item 001. Pls suggest. Regards Vaibhav

  • Report:Setting the line-count in the output automatically

    i want to set the line-count in the report automatically irrespective of screen resolution.could you please explain.

  • Adding multiple states in state machine

    Hi all, I have a state machine with many states.  I am using an enum to select state.  I didn't add all the state in the enum at the beginning, so I am adding more statess to the enum and to the state machine as I go.  I found the following pretty tr

  • Outlook pop3 email receiving problem

    Dear Sir, I am using Office 365 Home Plus and my Outlook stopped receiving emails a week ago. Before that it was working fine. Safe mode does not help, new profile does not help. I can Access my pop3 email on webmail but when I try to receive emails