Nokia 6288 not detected on the software updater

Greetings,
I'm wanting to update my firmware on my phone but not getting this right. I can get my phone connected to the pc to do the backup and all that but when I open the updater it does not detect what phone I'm using... :roll:
Any ideas why this is happening?
Regards

Yeah, the same here! What the hell is going on with Nokia? First I've had Nokia 6280, nothing, couldn't update it, only 6288, and now? Even 6288 doesn't work!!! Why? Do you, Nokia team want to really get rid of all of your clients? I always loved Nokia phones but since few months I'm starting to hate you...I'm sorry...Message Edited by adi2012 on 23-Nov-200701:58 AM

Similar Messages

  • My Canon MX310 Series Printer failed as the software "is currently not available from the Software Update Server"? What is the matter with Apple OSX Mountain Lion?

    Mountain Lion stopped working with our Canon MX310 Printer? Why is the software not available from the Software Update Server?

    The printer and ICA scanner driver is available from Apple. There is probably some other reason why you cannot get the drivers.
    You can also get the drivers from Canon.
    But reading your post it sounds like you were printing to the MX310 and recently it has stopped printing. Is this the case?

  • Nokia XL not detected by pc after update 1.2.3.1

    I recently updated my nokia xl to software version to 1.2.3.1. But now it is not detected by the PC. It was working fine before the update. I tried reinstalling the usb driver according to the instructions available at http://developer.nokia.com/resources/library/nokia​-x/getting-started/device-setup.html. But now the mesage shown in the following picture comes up. After doing some search I found few cases where the same problem exists. Buy none of the solutions worked out for me. please help me
    ps: I'm using windows 8 OS
    Attachments:
    Capture.JPG ‏33 KB

    Hi.. have you tried removing the PCS & NSU and then updating your XP to SP3?
    Try that and then reinstall the PCS & NSU and it should work fine.. I had this issue a few times on the 5310 I had also under the USB option in settings try setting the option to PC suite and then turn ask on connect to off this tells the phone only to connect in PC suite mode and will not prompt you on connecting the CA-101 Cable
    Hope this helps
    Jonas
    Current Device; Nokia E71-1 F/W v200.21.118
    Past Devices; Nokia 6220 Classic.. Nokia 6500 Slide.. Nokia 5310 Xpress Music.. Nokia E65.. Nokia 6230i & Many Many More!

  • My MacBook pro did not restart after the software update

    My MacBook pro did not restart after the software update

    Kappy wrote:
    Now, were I a mindreader this wouldn't be an issue, but unfortunately, I'm not.
    WHAT??? Now that's a disappointment! I was sure the all-seeing, all-knowing Prof. Kappy would instantly discover the problem thru time and space.... 
    Ok, back to the issue at hand, the Prof. is right. In none of the OP's participation, nor in any of his choir of followers save mommy power is there the least hint of what Apple product is failing. While y'all get a move on and disgorge the details, may want to try a Safe Boot. Hold down the Shift key prior to the startup chime and wait awhile. IF it starts, then it means you have some third-party software that's causing the problem. Else there's a strong probability a complete reinstall will occur in your near future.
    In the future and in spite of what some purists may say, be sure to service the system disk BEFORE patching. By "service" I mean booting up the Mac using your Install DVD (Snow Leopard or priors) or booting in Recovery Mode (Command R, in the Lions and successors), running the Disk Utility found in that mode and doing a Repair Disk and Repair Disk Permissions. Until NO errors show up. Cause patching up an already damaged system will only make things worse.

  • TS1398 Wifi not responding after the software update. restored the system but still no luck.

    After I updated the software, the wi-fi has stopped working. I have already restored the system but the problem remains. Wifi is working fine otherwise.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iPhone 4 is not showing me the ¨software update¨

    I have an iPhone 4 and i wanna update to iOS 7 but neither my phone nor itunes is showing me that i have an update, everytime i check it says "your software is up to date". Anyone can help me? iOS 7 is supposed to be available to the public today, however it doesnt seem to me. Thanks for any help

    It's not out yet, wait.

  • HT3180 My Apple TV is not starting after the software updates

    I have tried to use menu and down on remote , disconnected power supply etc but nothing is working to restart the Apple TV

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • I tried to upload i.o.s 6.0 to my i phone 4 but it said i need to connect to i tunes.....when i do it keeps on saying i tunes could not contact the software update??? help!

    tried to upload i.o.s 6.0 to my i phone 4 but it said i need to connect to i tunes.....when i do it keeps on saying i tunes could not contact the software update??? help!

    Ouch! If it didn't break you are very lucky.
    Follow the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Select the iPod in iTunes and choose "restore from backup".
    If you still can't get it to work, you have done all you can and only Apple will be able to help.

  • My iOS 7 is not the settings anymore? It went back to iOS 6.13 in the software update place , why is that ?

    My iOS 7 is not the settings anymore? It went back to iOS 6.13 in the software update place , why is that ?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • Software for HP Color LaserJet CM1312nfi MFP is not currently available from the Software Update server.

    I recently upgraded to Mountain Lion, and found that I could no longer print to  my HP CM1312nfi.
    This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
    My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
    When I try to download the driver by bonjour or IP, I get the following error message:
    Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
    Is this truly a Software Update server error, and if so, any clue when it will be resolved?
    I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog  lists no devices.
    Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
    Thanks for your time and attention.

    Of course, once I posted this, I tried again and downloaded the driver without issue.
    My second question still stands, however:
    Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

  • Can't install printer driver: HP Color LaserJet 2605dn drivers "not currently available from the Software Update server"

    I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it.  When I try add the printer I get this message:
    Software for this printer is available from Apple. Would you like to download and install it?
    After clicking Download & Install (the only option other than Cancel), I get this:
    Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
    What's the workaround when Mountain Lion can't find the driver?
    Thanks!

    Sean L. wrote:
    I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it.  When I try add the printer I get this message:
    Software for this printer is available from Apple. Would you like to download and install it?
    After clicking Download & Install (the only option other than Cancel), I get this:
    Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
    What's the workaround when Mountain Lion can't find the driver?
    Thanks!
    The 2605dn has dual Network and USB connectivity. Which are you attempting to configure: Network or attached USB?
    Printer on, and if networked, use a static IP address
    Print & Scan
    IP
    Provide printer static IP address
    Select Printer Software ... HP Color LaserJet 2605dn driver (not sure about that 2600 driver)
    Add
    Configure Driver under Options and Supplies
    I have a 1994 HP Laserjet 4m Plus set up using these steps and the appropriate driver. I just added another network printer, using the same IP address, but using the above 2605dn driver without any issue other than complaint about a redundant IP address.
    Hopefully, you have already sorted this out.

  • Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Download the Brother Mountain Lion drivers here.

  • Purchased books do not show up on my Kindle app since the software update.  how can I fix?

    purchased books do not show up on my Kindle app since the software update.  how can I fix?

        I love reading books on my phone, nubi. So I understasnd your desire to get this resolved in a timely manner. Unfortuantely, this is not something that Verizon supports. I would suggest reaching out to application developer. They should be able to provide you with some insight. Have a great day.
    ChaunceyM_VZW
    Follow us on twitter @VZWSupport

  • Since the software update my photo from LinkedIn now is attached to all of my text messages and I DO NOT WANT THAT.  How do I remove my photo from my test messages?

    Anyone know how to remove your own picture that is now attached to all text messages?  Since the software update (assume KitKat) my LinkedIn photo is now attached to all my text messages and I never set that up, nor can I figure out how to remove it!
    How do I remove my photo from my text messages?  Android RazrM.
    Help!  It is driving me crazy.  Thank you.

    Thanks, but this information was not useful.  First it was outdated (2012 and the software is 2013/2104)  in the Settings/Apps/All section there was no "Text Messaging" icon.  Under "Phone/Messaging" the clear cache was not possible, it was not available, an active option.
    VERIZON/GOOGLE -  I am still hoping to learn how to remove my photo from my text messages - why is this so difficult?  Why is something like this added without my permission or at my request?   May be a reason to jump ship to iOS.

  • HT4623 hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....

    hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....

    Connect it to iTunes on a computer and update it from there.
    (73609)

Maybe you are looking for

  • Internal server error while connecting to Tandem NonStop SQL database

    Hi - We are trying to connect to the Tandem NonStop SQL database through JDeveloper. We are using Type4 JDBC driver provided by Tandem NonStop and everything works fine from Database connection to testing the AppModule through the BC4J tester. The VO

  • My number is not showing for iMessage only my email why?

    IiMessage is sending from my email? How do switch it back to my number? in the settings>message>send and receive it's not showing my number...so any other solutions?

  • HELP! No utilities folder on my mac

    Hi. I can´t understand how the utilities folder in my G5 PCC is probably deleted.... I´m triying to reinstall but since there is not installer or disc utilities the computer says always "restart to begin the installation". What can I do ?

  • Default Column Name in Module

    Hi all In Designer 10.1.2.0.1 i have the following problem: If i create a Table-Usage in a Module-Component i define the source table. After this i choose the columns on the "items"-tab. In the "available columns"-section the columns are displayed co

  • Use of Item Category Group

    Hello All can any one explain the functional use of Item category group maintained in CRM material master under basic data tab and also under sales and distribution tab. what is the difference between two views and what happens if dont have value at