Nokia 6288 - white screen with battery icon

I've had problems with my Nokia 6288 since very soon after I bought it.
I turn my phone on and it just has a white screen with the battery icon. I can punch numbers into the keypad to call out, but I cannot do anything else.
Any idea how to reset the phone or anything that might help me be able to use my phone again?

does it say "phone restricted"? if it does, it is a matter of either updating to the latest firmware via Nokia Software Updater, or just take out your battery and reinsert it and turn the phone back on. i too had similar problem as to what you are describing.

Similar Messages

  • STUCK on white screen with battery icon in the middle with RED LIGHT

    I have BB curve 8900 and my BB shutdown by itself yesterday and it wont start on again ! 
    so i charged it the red LED start to show and white screen with battery icon in the middle it looks like empty battery, and stuck on it and sometimes it keeps spinning over and over again until it bcome black screen then it starts the same begining !
    I tried the hard boot by taking the battery out for sometime and reinstalled it but it didn't work. I even try putting a different battery (friends battery) but still no joy.. 
    and the main catch is if i try taking out the battery and plug the charger or connects it to the laptop it does the same thing without even any battery in it.
    So is it really a Battery problem or the OS problem.?? (If its a OS problem, can u install it myself at home.?
    Waiting for the reply
    Thanks
    Jasdeep Jolly

    jasdeep_jolly wrote:
    if it does not boot then..??
    Well, you need to do as suggested first.
    Then, if not: If your BlackBerry stays powered off with a black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I dropped my iphone 3gs and the screen has gone blank now showing a white screen with no icons can anyone advise me how to fix it?

    I dropped my iphone 3gs and the screen has gone blank now showing a white screen with no icons can anyone advise me how to fix it?

    Tim is correct.
    But, first step with 3GS white screen and most iPhone problems is Reset, hold both home and power buttons until iPhone begins to restart itself, usually about 10 seconds of holding both buttons. If still white screen.
    Next step would be Restore the iPhone Firmware with iTunes on your computer. If still white screen.
    Next step would be to follow Tim's advice, if you had not already.

  • Power Mac G5 on start up it repetedly has white screen with circling icon then just switches off

    Power Mac G5... Pleas Help!!! i'm not sure if my hard drive is broken but on start up it repetedly has white screen with the circling (doing somthing) icon then just switches off. If i press alt when switching on i get a grey screen with 3 icons, 1st is like a refresh arrow button & last is a straight arrow button on pressing either of these mac just starts the white screen thing again, the middle icon is a picture of a hard drive with a blue cross in the corner & written under neath it says macintosh HD. Does this mean my hard drive has gone?

    Been there, done that.  Try a Safe Boot (holding down the shift key at boot) and see if it boots.  If it boots, then you may be having problems with either the power supply or the video card.  What video card is in the machine?
    If it does a safe boot OK, then we can troubleshoot using a verbose boot.  Verbose boot puts up a Unix Console screen and displays text output during the boot process.  When I had these symptoms, verbose boot showed me that the power supply was clicking off right after the kext to drive the GeForce 6800 card loaded.  I replaced the power supply and the problem went away.
    To initiate a verbose boot, hold down the  cmd-V combination until you see the console screen come up.  Watch the output and pay attention, because you need to remember what is being said when the machine shuts down.  You may need to repeat this two or three times.
    As an aside, often times power supplies exhibit this behavior when they have become choked with dust.  This is pretty universal after five or six years, requiring that the power supply be removed and the dust blown out with clean shop air.

  • White screen with file icon and Question mark after a kernel panic???

    I'm using my girlfriends 20" iMac and her computer keeps having kernel panics. And then at times when we restart the computer, we get a white screen with a file icon and a question mark inside. Any ideas on what to do???? Her graduation project is on that computer and she is stressed like you wouldn't believe. Safe to say, I'm taking the brunt of it. Please help!!!

    It sounds like you might be having a hard drive problem. The folder icon with question mark means the computer can't find a startup drive/system folder. I suggest that you back up all important data, especially her project. Before bringing it in for service, run the Apple Hardware Test - put in your original system restore DVD and restart the computer, holdng down the "D" key. Run the extended diagnositics (it will take over an hour (depending on how much RAM you have) and will tell you if there is anything wrong with your hardware. If it dinds a problem then you can take it to the nearest Apple authorized service provider to check it out.

  • Nokia 6288 white screen

    ok, i just called my mum, then 20 minutes later i looked at my phone at the screen went totally white. Its done this a few times before and fixed itself after 30 secs. Although this time it didnt.It is completely white!. everytime i switch it on there is just a white screen, flashes for a bit and turns itself off, so i cant actualy get on it!
    does anyone know hoe to restore factory settings without going onto the phone?!
    this is the second time ive had trouble with this phone. its ridiculous

    Hey,
    There has been a massive number of Nokia 6288's with this problem or similar in that the screen was flashing white, the problem was so large we were considering the flashing white screen as a sellin point !
    Any handsets we've had with this issue just needed a software upgrade, you can do this yourself through the Nokia download and support service or by dropping it to a Nokia Service Centre or back to the place of purchase where they phone may be sent for software upgrading which generally takes 5-7 working days.
    Hopefully Helpful,
    Vodacaf
    Message Edited by geronimo on 26-Feb-2008 05:47 AM
    blackberry storm 9500

  • White screen with battery with red line across- software issue

    My phone froze last week when I plugged it in for the night. The battery had been dying pretty quickly for the 2 weeks before that. So i took out the battery and put it back in and then this white screen appeared with a battery and a red line across. I replaced the battery and it still gives me the same message. I tried pluggin the fone into the computer and reloading the software from the blackberry site and still nothing. The computer is not even registering that the fone is plugged in. Help please! I am running out of ideas!

    My phone froze last week when I plugged it in for the night. The battery had been dying pretty quickly for the 2 weeks before that. So i took out the battery and put it back in and then this white screen appeared with a battery and a red line across. I replaced the battery and it still gives me the same message. I tried pluggin the fone into the computer and reloading the software from the blackberry site and still nothing. The computer is not even registering that the fone is plugged in. Help please! I am running out of ideas!

  • IPod nano 6th generation: "Do not disconnect" on white screen w/flashing icon; previously "Connected-Eject before Disconnecting" on dark screen w/USB icon; no content on iPod

    Trouble began with "Reconnect to iTunes to Restore" message after I inadvertantly held down the Wake/Sleep button long enough to turn the iPod off before pausing the podcast in progress.
    My subseqent actions to try to remedy:
    -Restored the iPod
         -while Restoring, the rotating circular arrows and "Synchronizing-Do Not Disconnect" screen appeared followed by "Connected-Eject Before Disconnecting"
         -when I ejected the iPod and disconnected it, the normal icons showed but there was no content
    -Reinstalled the latest iTunes 11.0.3 which I had downloaded previously a few days before my problems began
    -Restored iPod again:  still said "Connected-Eject before Disconnecting"
    -Manually put the iPod into Disk Mode (said to be helpful in troubleshooting):  "Do Not Disconnect" on white screen with flashing icon (circle with diagonal line)
    -Ejected and disconnected the iPod.
    -Reconnected the iPod:  same message

    You need to either the let the iPod finishing syncing with iTunes, or figure out what application is still using it in the back ground that prevents you from being able to properly eject the device.  Just unplugging it from the computer is almost always going to cause issues when it's still in use by iTunes or another application.
    So let's connect the device to iTunes one more time and let it finish restoring.  Then try syncing a bit of content over to it and wait for it to finish the sync process.  Then try to properly eject it from iTunes this time.
    B-rock

  • Can't log in white screen with flashing file and Question mark

    I've been have trouble with getting on line and screen freezing up. Now I have a solid white screen with a icon of a file and question mark on it flashing. Iv tried unplugging and resetting with no luck.

    Have a look at > A flashing question mark appears when you start your Mac
    Dennis

  • Any solution to a white screen with a battery icon with a lightning bolt through it on the Tour?

    My daughters blackberry tour suddenly stopped taking a charge and would not power on. It just shows a white screen, with a battery shaped icon & lightning bolt through it.  Went to our local cell store and they did a battery swap for us. The phone worked for about 2 hours then did the same thing. After a couple more swaps with no change, they un installed and re-installed the software. This again fixed it temporarily. When it quit again, we were sent a replacement phone. The replacement did the same thing. We were sent a 2nd replacement, but in the meantime, the first replacement started working. It worked for about a week then did the same thing. Now we have attempted to activate the 2nd replacement and it gets the same screen and will not charge enough to even activate it. I'm working with the customer support (phone is under warranty still), but so far no solution. Anyone else experience this? I find it strange that we now have a 3rd phone, doing the same thing and we have tried new batteries and an new charger.

    Here are some good charging tips, please read and you'll see that many of them will apply to you.
    http://www.blackberryfaq.com/index.php/Maximum_Battery_Life
    And here: http://supportforums.blackberry.com/t5/BlackBerry-Community-Post/Power-Saving-Tips-for-your-BlackBer...
    Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
    If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
    Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
    Read this article also: http://www.blackberry.com/btsc/dynamickc.do?externalId=KB18223&sliceID=1&command=show&forward=nonthr...
    Download Desktop Manager from here:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HELP-- N97 stuck at white screen with nokia logo

    Kindly help anyone. I installed lifetime free ovi maps on to N97 via computer and it worked initially. Then all of a sudden everything went black and phone restarted itself and since then it is stuck on the white screen with nokia logo.I have taken out battery umpteen times and everytime it is stuck. Won't go beyond this point. kindly help

    @tcwlam-if yougo to the website, you can download the app as a .sisx file, and you can just load the file onto your phone and install it there.
    @silvervectra- I'm guessing you downloaded it and just installed despite the compatibility warning? The problem why this is still not available to the n97 is likely  due to software incompatibility, which is why it will be delayed to come with the new firmware. If so you just bricked your phone due to you not wanting to wait, congratulations (insert really sarcastic tone)! Anyway, just do the hard reset. Hopefully it would fix it and uninstall the ovi maps. Otherwise you would likely have to have the guys at the Nokia Care Center reflash your phone and roll back ovi maps.
    Message Edited by chanchan05 on 23-Jan-2010 11:14 AM
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

    I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

    If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
    Boot  into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as  Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
    Now go to the Restore tab and reinstall from your backup.

  • My PC won't startup normally or in safe mode . I have a white screen with a flashing folder icon which has a ? on it. How do I get it to start?

    My PC will not start normally or in safe mode. I have tried several times in safe mode. All I have now is a white screen with a folder icon containing a ? questiomark. This icon is flashing. No cursor available.

    The blinking question mark means the startup drive can't be found.
    It could be that it has failed or needs major repair. Boot from the Snow Leopard DVD and run Disk Utility.

  • When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7

    When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.

    http://support.apple.com/kb/HT1808
    Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have.

  • After running mac tuneup got a red dot on the hard drive icon, nothing would respond, now on restart cant get past white screen with apple logo, mac tune up disk still in laptop

    after running mac tuneup got a red dot on the hard drive icon, nothing would respond, now on restart cant get past white screen with apple logo, mac tune up disk still in laptop

    Restart your MBP holding the trackpad down and hopefully the disk will be ejected.  Then try to return it and get a refund or put it in the trash.  There is nothing that software does for your MBP that you cannot do yourself or with free software.
    If can get your MBP started, delete all traces of the offending software.  Worst case is that you may have to erase the HDD and reload the OS and your user data.  I trust that you have a backup (minus MacTuneUp).
    Courcoul has given you his opinion in a very succinct manner, and as you might surmise, I agree with him.
    Ciao.

Maybe you are looking for

  • Mail Adapter requirement

    Hi Experts The current requirement in my Interface development is to use the MAIL ADAPTER  to send mails based on the below requirements Kindly let me know if it is possible and how to achieve it : 1) The scenarios is File to Proxy and the requiremen

  • Adavnces with PO.

    Hi, Generally the advances are paid for the total purchase Order value not for PO line items basis.  But in F-47 when the advance request is made with reference to PO, the item number is also required. Canu2019t we restrict only to PO number? Gayani

  • Cannot reverse document with future posting date

    Hi, When I tried to reverse a document with future posting date, system gives error F5362 Posting date must not be smaller than XX.XX.XXXX (x = future posting date). Is it possible to do this in SAP?

  • ARIS for SAP NetWeaver?

    Hi all, 1.What is ARIS? 2.What is ARIS for SAP NetWeaver? 3.How it is related to Solution Manager? Regards Neni

  • NetFlow Collector - Java heap space Error

    Hello, I have setup NetFlow colector v6 to receive flows from 3 devices, but today, 4 days after i have started the collector, i receive the folowing error and i'm unable to generate reports anymore: [2009-01-08 11:13:59 EET] ERROR com.cisco.nfc.repo