Nokia 6300 - 'operation failed. Try again.'

Hello,
80% of my attempts to open my inbox are met with this message - it is driving me to madness! Also, if I try to browse my contacts the phone briefly freezes and dumps me back to the main screen. When it does both of these things it seems to lose signal for a few moments before it gathers itself.
I was thinking that this might be a simcard issue, but that was taken from my other phone and it had no problems there. Any ideas?
GMH

try to do the following steps:
1. Reset the device - Kindly switch off the device and take out the battery for 5 minutes, then put it back on.
2. If the issue still persists, do a restore on the settings of your device
a ) menu
b ) settings
c ) restore factory settings
d ) restore all - resets all the settings to the default ( you will not lose any data)
The default code for ALL operations listed here is 12345.
3. If the problem is still there, update the software of your device. Just log on to http://www.nokia.co.uk/support/download-software/device-software-update for the details on how to update the software of your device.
If it still not resolve, it is better that you visit the nearest Nokia Carepoint in your area. The contact details of the Nokia Carepoint is http://www.nokia.co.uk/support/repair/repair/recycle.

Similar Messages

Nokia 6111- "operation failed, try again"

please help me...when i try to get into my Nokia 6111 inbox i get the message "operation failed, try again". i have tried resetting, and putting the battery and sim card back in but nothing changes..please help as i dont know what to do to fix it.... :-(
Liz

same has happened to me.
at first I had a broken massege inside my Inbox, which I couldn't delete not matter how I tried. I could access the inbox though.
couple of months later I stopped being able to access the inbox, so I tried to delete all of the sms. 1 sms wasn't deleted but I could access the inbox again.
right now I can access both inbox and sent items but when I go to the last message (by scrolling 1 time up) the same error occurs and it takes me out of the inbox/sent items folder. whenever I turn the cellphone off I get the error when trying to access either folder, but eventually it goes back to point where I can access but gives me error when trying to access the first oldest message.
my cellphone is a 5300 xpress music.
I'd rather exchange this one for an equivalent instead of getting it for repairs, but I'm not sure if the store where I bought it does that.

Operation failed try again later !

hello
i just transferred few of my messages to a subfolder i created under saved messages folder. it contains 200 messages and now whenever i am opening it an error comes OPERATION FAILED TRY AGAIN LATER. The folder is also not appearing when i try to view it from pc by connecting it thru a data cable
is there anyway to copy the contents of that folder to pc or to any other device?
please help me out

You can try restoring the factory settings using the code *#7780# if prompted select settings only and create security code or try using the 12345 security code. You did not mention your phone model - check that your cable is the correct one for your phone model by using the web search on the cable model or your phone accssories page.

Error occurred in deployment step 'Install app for SharePoint': We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.

While deploying sharepoint hosted app i am getting error "Error occurred in deployment step 'Install app for SharePoint': We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact
your administrator.". From the developer site i remove the app manually and after deploying i am getting the same error again.
Harminder singh

I was trying to install SharePoint 2013 on premise development environment and encountered the following issues while deploying the app using Visual studio 2013.
Please refer these articles for configuration settings.
http://blogs.msdn.com/b/how24/archive/2013/06/14/prepare-your-sharepoint-2013-farm-for-app-development-and-debugging.aspx
http://www.codeproject.com/Articles/515677/MyplusFirstplusSharepoint-HostedplusAppplusinplus2
http://blogs.technet.com/b/mspfe/archive/2013/01/31/configuring-sharepoint-on-premise-deployments-for-apps.aspx
http://aanuwizard.com/2012/12/07/article-14-from-30-system-account-can-not-deploy-or-purchase-an-app-in-sharepoint-2013-rtm/
Error 1:
Error occurred in deployment step 'Install app for SharePoint': The System Account cannot perform this action.
Error 2:
The local SharePoint server is not available. Check that the server is running and connected to the SharePoint farm.
Error 3:
Error occurred in deployment step 'Install app for SharePoint': We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
Solution:
For error 1, follow these instructions:
a. Create a new domain account DOMAIN\myApp_Admin
b. add DOMAIN\myApp_Admin to local admin group
c. add DOMAIN\myApp_Admin to Farm Administrators group
   Central Admin site --> Site Settings --> People and groups
   Add DOMAIN\myApp_Admin
For error 2 & 3, follow these instructions:
1. Grant DOMAIN\myApp_Admin accont a sysadmin server role on SQL server
2. Open SharePoint Power Shell and execute Add-SPShellAdmin <DOMAIN\myApp_Admin> command.
3. Grant DOMAIN\myApp_Admin a db_owner rights to web application Content database that you would like to use for debugging SharePoint 2013 app.
4. Make sure following roles are assigned for SharePoint_Config database
   SharePoint_Shell_Access
   SPDDataAccess
   public
5. Make sure following roles are assigned for SharePoint_Content database
   db_owner
5. Make sure following roles are assigned for SharePoint_AdminContent database
   public

My iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?

my iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?

Apple's activation server is down.
I called Apple and the support team had the same issue.
All you can do is be patient.

Nokia 6230i operation failed

hi!
I'm using a Nokia 6230i version 1.4, Nokia PC suite 6.8 and Bluetooth software 1.4.1 build 7, and Windows XP 2.
the problem is i can't install an application from the nokia application installer. i can see the other applications installed on my phone but whenever i try to install another one, it keeps me an "operation failed" message. in the past, i have installed more than five applications, but now, i can't install a single app.
please do help me. thanks!Message Edited by imhoney28 on 24-Jul-2006
02:30 AM

Hi,
I think that reason is this: There are not enough free memory for applications anymore (BTW: free memory for applications is smaller than phone's whole free memory)
Delete not needed applications from phone and try again...

Click on FF icon get site fail - try again, click on try again get MSN, bing. How do Istop MSN &bing

unable to open Ffox. if wait and try later, get the site fail notice.
If click on try again I get MSN and Bing, and all it's garbage!
Tried 'uninstall' in control panel. Unable to find MSN. Deleted Bing but when trying Ffox again got MSN & Bing
If I use the Bing search engine it works and I can access the web
but at a cost of time & intense irritation.

Hi viafax,
We have forwarded your comments to the forum administrators.

Cant delete icloud backup - msg del failed, try again later

hello,
i bought an iphone 4s. icloud backups it into the cloud. than i brought it back to apple because of to noisy vibration.
now i wanna delete the 100 mb backup but every time i get the message that the backup can not be deleted and i should try again later....
what can i do? and why is it like this?

I've been having the same problem, can't delete the backup file.
Tried deleting it through iphone, ipad and PC.
All of them show me the same error as mentioned above.

How do I set up my finger print scan it keeps showing me failed try again

how do i fi I set up my finger print scan for my iPhone 5s it keeps showing me failed and I have already updated my device I need help I called apple but before they can do anything for me the call Cuts off saying there's a limited time for the call

Have you tried turning Touch ID off and then back on?
If it continues to fail it is probably a hardware error and you will need to get it serviced.

I left my Mac at the store for it to complete a 16 hr. backup. Yet, I still get the message that the backup has failed, try again later. If this persists use Utility Disk to repair. I have done all of this and the Apple Genus said everything was ok.

My question: is it important that I seek further help with this backkup issue or just ignore it. The 16 hr. backup at the Apple Store is accessable in the Time Machine. I'm just concerned about the error message.

I did the verification, which indicated that the last backup was 0422 today. However, when I opened my Mac, this morning at 0500, I still got the message that the backup was NOT performed, etc, etc. etc.
The backup is made on the standard Tiime Machine.
The next backup has already started as of 0518. Let's see what happens. This is strange. Here is the time sequence: 0518    Backup started
                0525     Mac. froze and color wheel would not allow me to access anything on the Mac,
                0528     Backup continuted: 91.9 MB of 94.8 MB
                0530     92.2 MB of 94.8 MB
                0532     Backup stopped. Message: Latest backup 4:22 Today.
It seems to be functioning properly at this point. I'm curious to see if I get the standard "The backkup was not performed because an error occured while copying files to the backup disk" message, later today.
I appreciate your help. I'll keep you posted as I may need your help again.
Thanks

Site Survey Failed--Try Again

I am trying to connect my Range Expander wre54g, ver 3.0 to my Linksys Router Wrt54g and I keep getting the site survey failed message when running the CD--I tried auto configuration but the expander doesnt expand my wireless range on my laptop..Any Ideas??

Reset the range extender for few seconds .....
Make sure that the wireless security on the router is disabled ....
Hold the Autoconfigure button for few seconds ..... once you get both lights Blue ....release it .....
Check on the wireless computer if it shows connected status under wireless network connections or not .....
If so power down the Router ..... your computer will be still connected to the Range Extender network .....
Use static Ip 192.168.1.50 ...subnet 255.255.255.0 ...& gateway 192.168.1.240 on the wireless computer under wireless network connection ....
Open setup page using http://192.168.1.240 ..... use admin as password without any username .....
Enable the wireless security on the same ...... click save settings .....
Use the same security settings on the router ...after powering up the router .....
Power cycle the network & see if it still shows connected or not .....

Restrictions passcode failed try again in 22,620,934 minutes resetting iPod

My son's ipod showed this message today when I tried to change he time. He let his battery die. Can i reset it completely?

- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod.
- If you are up to it see:
How to reset forgotten Restrictions...: Apple Support Communities
How to reset forgotten Restrictions...: Apple Support Communities

Nokia 6300, iSync, and Contact Photos-

Thanks to the following links, I was able to get my new Nokia 6300 to successfully sync with my Mac’s Address Book via iSync:
http://klauskjeldsen.dk/2007/06/08/free-nokia-6300-isync-plugin/
http://nokia6300.net/8/new-version-of-the-nokia-6300-isync-plugin
http://brent.kearneys.ca/technology/2007/how-to-sync-a-nokia-6300-on-osx/
http://kaspers.freeflux.net/blog/archive/2007/04/13/how-to-isync-a-nokia-6300.html
Unfortunately, two things didn’t sync up: Birthdays and Contact Photos. After politely asking people if there was any way to get these to work (especially photos, as it’s nice to see someone’s picture pop up on the phone for faster recognition before you unceremoniously reject them) I tried to tackle this one on my own. I was able to dig around in the plist files of the Nokia N93 and glean the few lines that make both of these details available to the Nokia 6300 plugin.
Before we begin however, I’ve noticed some problems that can occur with Photo syncing. PLEASE READ THIS THOROUGHLY before continuing: it’ll save some head-banging and frustration later.
Failing to follow the following guidelines will result in a completely failed sync. Should this happen, I simply deleted all of my contacts on the phone (phone memory, not SIM card), tried to determine the problem, and tried again.
Also, note that if you do end up deleting all of the contacts on your phone, you’ll also lose your 1-touch dialing and the entries in your caller groups (but not the groups themselves).
Here we go:
Do not use .GIF files — JPG only! (I didn’t test PNG)
You cannot drag-and-drop from a web-page directly onto a contact. Although this works for Address Book in that you’ll see the ‘image edit’ window pop-open, and you can save your contact, when it comes to iSync your entire sync will fail. If you want to use someone’s image (from Facebook, for example) simply drag the photo you want from the web-page onto your desktop, and then drag the photo from your desktop onto the Address Book entry’s ‘contact photo’ area. You’re then free to delete the image from your desktop.
You cannot sync with a ’smart group’ that you created within Address Book. This has more to do with iSync than the new plugin, but it’s a pain nonetheless. Physical groups only!
When a sync fails, you are not told what failed, or why it failed. iSync detailed logs are useless too, stating only:
5:28:24 PM Error [Nokia 6300] An unexpected error occured.
5:28:24 PM Error Device "Nokia 6300" synchronization failed
Fun! What I did was create a ‘temp’ group, set iSync to sync with that folder only for contacts, and then slowly add contacts into that temp group until a failure occurred so that I knew what the offending entry was.
The plugin that I’ve created is essentially just the one from the site listed above, but with some additional properties put into the PhoneContuit.plist and SyncEngine.plist files.
As with everyone else, I take no responsibility if this completely fcks up your phone or Address Book, but please do backup both your Address Book (File -> Back Up Address Book…) and your phone’s contacts (I typically just copy everything to SIM). I can say that this has worked fine for me for a day now, with a fair bit of testing. After I cleaned up my offending image-entries, it’s been great.
To install: Quit iSync, download the following zip file, and drag-and-drop the plugin into your system using the shortcut, and sync away.
Nokia 6300 iSync Plugin With Photos
Good luck, let me know how it goes in the comments!
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Hi! I can't download your Plugin for the Nokia 6300. Could you upload it again?
That would be very kind!
Thanks a lot!
T.

Getting a load failed try later message on ATV

Trying to AirPlay a movie from HBO GO to my tv. Get an error message that says load failed try again later. Any ideas how to resolve?

The movie shows the AirPlay icon and turns blue when selected. Tried again and got audio only but still no video. This was aftervpowering the apple box off and back on.

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

Nokia 6300 - 'operation failed. Try again.'

Similar Messages

Maybe you are looking for