Nokia 6300 screen turning black every 10 seconds

I recently replaced the LCD in my 6300 and this is happening, I have reset the phone and done a software update and it is still occuring. Any ideas?
Thanks in advance.

Since you have reset and also updated the firmware and it is still happening, it is probably a hardware issue. Return your phone to the Nokia Care Point which replaced your lcd for them to check it out for you.

Similar Messages

RMBP - external screen turns black for a few seconds every once in a while

My external screen (Dell U2711) connected via Thunderbolt to Displayport cable turns black every once in a while. The rMBP is in clamshell mode. When it starts it randomly blackens the screen for 2 seconds with an interval of 10 seconds to 5 minutes. A restart usually fixes the issue but it keeps coming back after some time.
Has anybody here experienced something similar?
What can be the cause of that?
This really starts to annoy me, because it seems I have to do reboot everytime I connect my laptop to my screen.

Never had the sort of problem - but then I've an Apple Thunderbolt Display and it just 'works'.
Could be that you're adapter is shot. You could buy a (or some) new ones from Monoprice (much cheaper than what Apple's third-party solutions sell for) and see if that's the problem.
Sorry I can't offer a more helpful solution...
Clinton

MacBook Pro won't boot - stays on black screen and beeps every few seconds

Hi,
My MacBook Pro has been having issues - when powered on wont boot past the white screen and more recently will just stay on black screen and beeps every 5 seconds. I had someone look at it and it seems apparently the motherboard is the problem
and either needs fixing or replacing. As I am traveling in Nicaragua the closest apple store is in Managua (capital). Would I be able to get the motherboard looked at and replaced if need be at this apple store? Also, does anyone know the approximate price for the motherboard to be replaced? Up until a few days ago the laptop was still turning on and working every now and then but now stays on black screen and beeps.
Any advice would be very helpful!
Thanks

Welcome to Apple Support Communities
It means that your Mac's memory is damaged > http://support.apple.com/kb/HT2538?viewlocale=en_US&locale=en_US
First, replace the memory modules. You can buy more memory at OWC or Crucial. It can also be replace by a reseller.
If it doesn't work, the RAM slots are damaged, so your logic board has to be replaced. It costs more than a half of the price of your MacBook

I have some problems when turning on my iphone5. The screen turns black and so white and when I start an app it suddenly turn itselves off. This happens every time when I turn it on. After I have turned it on several times it acts normal...Anyone??

I have some problems when turning on my iphone 5. The screen turns black and then white and the appli is red and when I finally get in and start an app it turnes itselves off. This happens every time when I turn it on. After I have turned it on several times it acts normal.... But something is wrong...Anyone???

Try reset
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
If no joy, restore backup using iTunes.
Finally last attempt, rsetore as new and sync content back manually.

Screen turns black suddenly, then re-emerges within a second

Hi,
here's a new strange issue with my new Asus Eee PC: Recently, and perhaps it's because some updated packages, the screen turns black totally without warning, and shows up again as if nothing has happened. That is, no matter what I currently do, at any time the screen turns completely black (not even dark or something like that) for just a second, and appears again simply. Nothing strange can be noticed, my session just continues as if this didn't happen.
I haven't had any success finding the triggers for that behaviour, it seems so accidentally ... be it browsing the web, right after session startup and everything else. What I've noticed though is that it happens only a single time within a session and both on battery and on power.
Graphic chip is an Intel Mobile 945 GME, and I'll add my xorg.conf as soon as I can. Strangely, there is no note in Xorg.0.log either.
What I'm currently doing now is checking whether this also happens in a GNOME session. Sounds strange, but the first time I've noticed this behaviour is with Openbox, and the last days I was using only Openbox. Still I don't know whether Openbox might cause this problem.
I'd be very glad if someone could give me some hints on tracking down this issue. Perhaps this also happens at someone else's machine.
Gratefully,
Leye
EDIT
Alright, here's my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "dri2"
Load "glx"
Load "dbe"
Load "extmod"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Option "AccelMethod" "exa"
Option "MigrationHeuristic" "greedy"
Option "DRI" "True"
Option "NoDDC" "True"
Option "XAANoOffscreenPixmaps" "True"
Option "EnablePageFlip" "True"
Option "RenderAccel" "True"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GME Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x600
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by Leye (2009-06-16 14:31:52)

Good to know that there are other people with the same issue as well. As long as I use Openbox, I've deactivated gnome-power-manager, though I hope this will go away with new updates. In the meantime, deactivating gnome-power-manager is o.k.
I don't know though what you should do if you rely on the whole GNOME desktop.

Mac screen goes black every 2-3 minutes, returns after 1 second, Mavericks

My MAC, updated to Mavericks, screen goes black every 2-3 minutes, for one second, then returns. Has anyone experienced this? How should I correct it?

SOLVED!!!!!
SO I did some more digging around and read ATI cards seem to overheat easily. I knew the fan was working, but after closer inspection I realised there was ALOT of built up dust on the card and clogging the fan and airflow. Blew it out with alot of compressed air, stuck it back in the Mac and BAM...no black screens. I tested it by streaming 6 video sources...doing 2 screen captures at once as well as watching a HD movie in fullscreen. Did all this for 30 minutes and no crashes. I also downloaded an app to monitor the temps inside the computer and the expansion bay stays at 41 degrees. No clue what it was before but obviously it was hotter than that. So my problem is solved! Funny that 10.7.5 made the card work harder. I wonder if its off loading some CPU stuff to the GPU for processing more than 10.7.4 so its just working a bit harder and so it heats up faster....

My ipad was in the process of updating (ios7) while at the same time syncing with my laptop. suddenly the screen turned black and after few seconds the new itune icon appeared on the screen. the same icon appears even after i reset it.

I was updating my ipad (ios7) while syncing with my laptop. suddenly the screen turned black and seconds later a huge itunes icon appeared on the screen. the same icon appears and not the usual interface even after resetting it several times.
please explain whta's happening.
thank you

See Unable to Update or Restore > http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766

The camera on my iphone4 opens up but seconds after the screen turns black with white line.

Hi guys! Please help me I have iPhone 4 .the camera although opens up when I press the button, but seconds after the screen turns black with white line. Need I need it repaired or there is some trick which can set it right.?

Screen turns black 1 second after opening play app and newspaper online?

Hi! The IPAD screen turns black just seconds after opening a tv/film app and yhe online newspaper after just 1 second. Why???

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

The camera screen turning black and locking up.

I see a lot of people having issues with the camera screen turning black and having to restart phone to fix it. I have the 6 plus and the screen turns black and locks when taking a second picture on the txt screen. I have replaced the phone and the new one does the same thing. I went to the Verizon store and they just scratched their heads. I have reset the old phone 3 times and restored from my back up which did not help. I put my sim card in new phone and restored it and it had the same problem. I thought my back up was the problem so I restored the new phone to new again without using my backup and it worked. After a few hours of turning off and on every setting I use and many many many factory resets I found the problem. Whenever the option for "speak screen" is turned on it causes the camera software to glitch and freeze after one picture is taken. I have verified it on 3 different Iphone 6 Plus.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

T400 Screen turns Black/Gray and System Freezes.

My screen turns black or gray and the system freezes.
The only way to fix it is to restart the system by opening all forms of power supply (adaptor and the battery).
Sometimes it works fine for a day or two, sometimes only for a few hours.
I think the problem has something do with my graphics drivers or some other driver from Lenovo.
I have used Lenovo Thinkvantage Toolbox to check for hardware errors and it shows that everything is working fine.
I have updated all drivers but still the problem is there.
I still have warrenty period left.
I bought my system 2 years ago and have never had any problem untill this one.
My system specifications are given below.
Model: Lenovo Thinkpad T400 2764 CTO
BIOS version (Latest?): 3.18 (latest)
OS loaded (ex. Win 7 64bit): Microsoft Windows 7 Ultimate 64-bit
Lenovo default OS: Microsoft Windows Vista Basic 32-bit
Updates from TVSU completed? Yes.
Updates from Windows Update? Yes.
Power Manager Version: 3.25
RAM installed (brand and 1 x 4gb, 1 x 2gb, 2 x 2gb?) 2 x 2 GB
Model of discrete card: ATI Mobility Radeon 3400
Any error notification? No
3rd party application installed for the graphic card? No.
Any particular application which is running on the time this issue arises? No.
Running on battery? AC? Docked on station? Error occurs in any state.
Any solutions?
Anyone had similar problems?
Thanks.

My problem seems to be similar. Sometimes my screen also turns black unexpectedly and the notebook freezes completely! In some cases I see a bluescreen of death and in some very few cases it restarts automatically. If it does not restart automatically I have to hold down the power button for some seconds to turn the notebook completely off (so that the "power on led" left to the "battery led" is not illuminated any more). Thereafter it is possible to start the notebook again. So unlike user 400 I do not have to remove any connected power sources.
The issue seems to occur out of nowere and seems not to be related to the use of a specific software. My system is up to date with lenovo drivers and windows update, exept the BIOS, which I updated the system two times since the problem exists since more than half a year!!
I also give my system specifications below:
Model: Lenovo Thinkpad T400 2767 WC8
BIOS version: 3.16
OS: Windows 7 Professional x64
Updates from TVSU completed? Yes. (exept newest BIOS)
Updates from Windows Update? Yes.
Power Manager Version: 3.25
RAM installed 2 x 2 GB (bought and placed by loenovo reseller)
Model of discrete card and integrated card: ATI Mobility Radeon 3400 and intel mobility 4 chip
Any error notification? yes, entry for bsod or kernel-power-issue in the system protocol (but no specific error)
3rd party application installed for the graphic card? No.
Any particular application which is running on the time this issue arises? No.
I use my notebook with AC connected, with battery and most of the time in the advanced mini dock! Since a few days the error never happened when the notebook was docked! So I thought it is a power issue or has something to do with the graphics card.
But now I found out, that the issue might be related to the wlan card! This is because I never had a wireless lan connection when the notebook was docked, since I use a LAN cable. But a few days before I had to use the wlan while my notebook was docked and the error occured after some time. Furthermore, as far as I remember the issue never occured when the wireless lan was switched off and not docked, but I will check that again.
The issue also never occured when I booted windows in safe mode.
@400
Maybe you can check if it is the same for you with your wlan? Maybe together we can find out what the exact problem is. I want to find out what is the problem to get it fixed by lenovo. Until now they alwas said, that they had never experienced such an error.
Please keep on reporting.
Thanks for any help

[Solved] After watching several youtube html5 720p videos, Firefox (version 33) display or screen turns black and aero transparency in windows 7 turns opaque.

Hello ! I just want to share something familiar with that black display or screen occurs for some people. When I watch youtube videos, I used to watch them in html5 720p videos (not flash videos, https://www.youtube.com/html5 ). I upgraded firefox to version 33. No black display when I used it. Randomly and after watching several html5 videos on youtube, aero transparency in my windows 7 turns opaque and firefox display goes all black. Firefox doesn't respond at any command. I need to kill his process in task manager in order to close it. When I open firefox again, normal display goes. To relaunch aero transparency in windows 7, I need to restart the service whose name is, I think, "Desktop Window Manager Session Manager". I use windows 7 in french and the service name is "Gestionnaire de sessions de Gestionnaire de fenetrage".
To solve this, I upgraded my graphic driver but this didn't work. I tried to put "layers.offmainthreadcomposition.enabled" to false in "about:config" menu. No random black display but some html elements turned black for some seconds or definitely when firefox rendered web pages. I tried to uncheck "Use hardware acceleration when available" in options menu. No random black display but html5 720p videos didn't play smoothly.
Then, I chose to watch youtube 720p videos again with flash player and no random black display and html5 720p videos played normally.
Here are my graphic acceleration infos :
Date du pilote 7-2-2014
Description de la carte NVIDIA GeForce GTS 360M
DirectWrite activé false (6.2.9200.16492)
Fenêtres avec accélération graphique 1/1 Direct3D 11 (OMTC)
GPU #2 active false
ID du périphérique 0x0cb1
ID du vendeur 0x10de
Pilotes de la carte nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
RAM de la carte 1024
Rendu WebGL Google Inc. -- ANGLE (NVIDIA GeForce GTS 360M Direct3D9Ex vs_3_0 ps_3_0)
Version du pilote 9.18.13.4052
windowLayerManagerRemote true
AzureCanvasBackend skia
AzureContentBackend cairo
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
I hope this will be useful to solve this problem in future versions or to someone.

This is happening to me too, I don't know if this is an Adobe Flash Player 11.5's bug or it's just my computer. All my browsers, chrome, IE9, Fox, doesn't even load anime videos. I tried reinstalling 11.5 many times, it have no effect but I use IE9 64-bit to run the videos that couldn't run. I waited 25 min for a JW player to load an episode of anime and I'm sick of it.

Audio not working / Video flashes to black every ~5 seconds

Hi. For some reason, when we turn on our TV as of late, every channel is having this issue where upon turning on, the video will flash to black every 5 seconds or so, and there is no audio. The only thing that solves the problem is unplugging and replugging in the STB (Motorola QIP7232-2).
I've replaced the HDMI cable with a new one. No dice.
Netflix via the X360 works without a hitch, so it's not the TV.
Scanning for repair/errors on the STB comes back with no issues detected.
Any reason why this is happening, and is anyone else experiencing this?

Ed_Krayer wrote:
I am having the same issue. Unplugging and repowering on resolve the issue, also disconnecting and reconnecting the HDMI cable fixes it. Output from the 7232 goes to a Sony Google TV device. I also have DirecTV and never had this issue. Seems like an HDMI switching problem. Is there an easier way to reset the 7232 than just unplugging it? Or - better yet - what's the cause and how do I resolve?
Here are some troubleshooting steps you can try on your own for the problematic STB.
From your FiOS TV remote, go to:
Menu -- Customer Support -- In Home Agent -- Reboot STB
Menu -- Customer Support -- In Home Agent -- Set Top Box Auto-Correction

TS3274 If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot.

If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot?

Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

My screen turns black i can listen but i can't see noting

my screen turns black i can listen but i can't see noting

reset the ipad by holding the home button and sleep/wake button together until the ipad turns off. Ignore the slide to power off message if it comes up. Then hold the sleep/wake button for a few seconds to turn it back on. You should get the apple logo then.

Nokia 6300 screen turning black every 10 seconds

Similar Messages

Maybe you are looking for