Nokia 6300 speed dial issue?

Many times when I key in a number (for speed dial), it actually calls the last dialed number. For instance, I've my home number at No. 2, I press 2 and then press call, it calls the last dialed number! I try it again, it works and calls home.
But the first time is always the last dialed no. and not the speed dial number!
Anybody else face this problem?

Tried that too, since thats the legit speed dial method explained in the manual. Same problem - goes to the last called number and not to the assigned number! Waiting for the firmware update in the hope that this may be rectified in that!

Similar Messages

9850 speed dial issue

I have a 9850 os 7.1 and have been having speed dial problems. I can touch and hold a number but the phone will not always dial. Sometimes I have to hold it for 10-15 seconds before it starts to dial. Other time I have to release and try again. I've had this issue on the past few os's .
Need BB and T-Mobile to kiss and makeup!!!

I've had that issue on mine, as well. A battery pull usually does the trick. To do so, remove your battery while your phone is powered on then replace it.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

SPA-525G2 Multicast/Speed Dial Issue

One of our customers reported some severe issues after we placed a speed dial button on their attendant consoles for their multicast paging group. Whenever they received an incoming call or placed an outgoing call, both streams of audio would play through the multicast group. Removing the speed dial button resolved the issue, however they are still requesting that particular feature.
I've reproduced the issue in a lab setting, using two 525G2s and one 504G, all with attendant consoles. The paging group is using 239.123.123.121, port 10000, number 1150 and the speed dial button can be placed on the phone or on the attendant console. I previously used 224.123.123.121, port 60000, but tried a combination of port/address changes that were inneffective. Initially I was using firmware version 7.4.8, but then upgraded to 7.4.9a, then to 7.4.9c, but this did not alleviate the issue.
As it stands, the issue will NOT present itself until the paging speed dial button is first used after either a reboot or a resync. The issue does not occur if the paging group is dialed directly and it only seems to happen on the SPA-525G2. The 504G will not activate multicast under these circumstances.
After the button is used, any incoming call will cause the 525s to multicast packets, even if the call is just ringing and not being answered. Conversely, simply engaging the line by picking up the handset or pressing the speakerphone button will activate multicast.
Has anyone come across this issue previously? I've searched the forum and Google, but haven't found any information thus far.

Have same exact issue with 525G2 + sidecar on 7.4.9c firmware. Problem only occurs if Page soft key or Page speed dial key is set up for page. Problem does not happen on 525G2 without a sidecar. Page uses multicast IP and Port to their lines in the page group. After using the button, every subsequent inbound and outbound call is multicast to all members of the page group. Pretty nasty issue.

Nokia 6230i Speed-Dials

I have a Nokia 6230i and wish to set speed dials as I had on my previous phone, a Nokia 8210.
On the 8210 I could set the speed dial on all numbers 1 - 9, including the No. 1 button. By pressing the key pad No. (e.g. number 1 button) and then pressing the hash button (bottom right) the display would change and the telephone number of speed dial for button No 1 would be displayed (e.g. 0121 123 4567) prior to making the call.
I could do this with all buttons 1 - 9 and show the 'phone number for each button.
The instruction book did not show how to do this,but somehow I managed it: I've since forgotten how I did it!
I would like to have the same function on my 6230i but I cannot replicate the same conditions as my 8210. On the 6230i I can put speed dials in buttons 2 - 9 (but not in button No 1 as it defaults to 901 each time - which I don't want) but I cannot find the facility for showing the number on screen for all the 1 - 9 buttons prior to dialing. Can anybody help please?

Try this:
Go into the following Menus:
Messages >> Voice Messages >> Voice Mailbox
Change voice mailbox number (available by ringing your operator) or whatever you want to change it to.
Gadget
Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail.

Nokia E61/Speed Dial - Invalid number error

I have synchronized with my outlook to pull my contacts into the phone. I can dial out of the contacts just fine but when I try to assign one to a speed dial button I get an "invalid number" error. If I create a new contact, it works when I assign it but not when I used one pulled in from my Outlook contacts. Any ideas?

I just noticed something similar to this problem on my E65.
If I assign a number to my SpeedDial (eg. +61-3-9999-9999) it will work if I use the hard key button to invoke the speed dial.
But if I start the Speed Dial application and use that interface on the GUI to call the interface the E65 complains "Invalid Phone Number".
It is strange the the hard-key speed-dial will work, yet the application interface doesn't.
Any suggestions?

Contacts and Speed Dial issue

This evening I went to call someone on my Pre Plus and my contacts were gone. Rebooted, they came back. Tried the speed dial again and it does not work. The contacts DO have the speed dials assigned. They worked yesterday....Anyone know what the problem is? I can't find anything here about it!

Hello and welcome to the forums;
Are any of your contacts assigned to the Z or B keys? If so, try reprogramming those contacts temporarily to another key. Also, have you tried un-assigning a speed dial and then re-assigning it to see if the speed dial comes back?
Hope this helps,
TreoAide

Bluetooth and Speed Dial Issue

I just got a new 8830, and have updated to latest software - 4.5.0.77, and am having two problems I can't find answers for.
Bluetooth - I enable Bluetooth; it works fine. After I power down and up again, the Bluetooth is disabled and has to be enabled again. Why does it not just stay enabled?
When the phone is locked (enterprise server), I can't use the speed dials, even though I have the phone set to Allow Calls when Locked. I can make calls, but not use speed dial.
My old 7130e allowed did not these things. Are there ways to fix these?
TIA...
Peter

Hello and welcome to the forums;
Are any of your contacts assigned to the Z or B keys? If so, try reprogramming those contacts temporarily to another key. Also, have you tried un-assigning a speed dial and then re-assigning it to see if the speed dial comes back?
Hope this helps,
TreoAide

Nokia XL speed dial settings: no possibility to se...

If I set a number on the speed dial settings it is obvious that I will call the contact always using a specific sim.
why not have the possibility to set the sim to use.

Hi, navio1973. This can be done. You can select which SIM card to use whenever you call or send text messages. To enable this, go to Settings > Phone > Dual SIM > Calls and messages > Always ask. If you prefer to use your SIM 2, you can also set it by selecting SIM 2. Hope this helps.

E7 speed dialing issue

E7 speed dialing does not work.
after setting up speed dials i tried to speed dial and the phone crashed down - home screen appeard, few seconds nothing happend, and the phone restarted. any idea what to do? or just wait for an update?
Solved!
Go to Solution.

Hi, you wrote in your other thread that you had made a reset on your device. Have you tried out the speed diall function again? Does it crash on you now?

CCME 10.5 on 2921 with 8961 Phones with BLF-Speed-Dial issues

Hi
We have a setup for a customer who has few 8961 phones and for some reason, the BLF SD stops working after working for few days.
The last time I raised a TAC SR and was advised to reload the router and everything came back to normal for few days.
Any ideas what is that I am missing?
Regards

Duplicate... See:
https://supportforums.cisco.com/discussion/12486256/ccme-105-2921-8961-phones-blf-speed-dial-issues

Nokia 6300 In Car Issue

Hi
First post here so go easy on me!
I've juts fitted a THB car kit for my new 6300. All wiring is chekced and double checked but whilst phone charges when in the cradle, it won't work through the kit itself.
Are there some settings that need to be altered on the phone itself that need to be altered to enable it to work through the kit.
Thanks in advance
Jon

The Bury cradle for Nokia 6300 is a bluetooth connection, make sure the blue wire is connected to ignition switch and you have paired the device, try reading the manual.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

N8 "Speed Dial" Reboot Issue...?

(original post link)
I have pr1.0 s/w 011.012, I also think it is a custom version, will speak to my carrier and post back later. But in the mean time it seems I am not alone with this issue. After googling I found others seem to be having the same issue, there might be bug after all regardless of the f/w & s/w release you have.
(see posted links to this forum below.)
speed dial issue link #1
speed dial issue link #2
speed dial issue link #3
speed dial issue link #4
Thanks jon, your assistance is greatly appreciated.

Yes I have the same issue, although I have'nt worked out what causes it to do this there is definately a problem.
Some are saying it might be the use of various characters like these " [ { ( ) } ] ' etc, but I dont use these in my contacts as I found out a long time ago some mobiles just dont like them.
Although it does not happen all the time, the frequency I found was about 3 out of 10, when it starts doing it it will continue to do it for 2 or 3 times in a row.
Currently I just dont use speed dial, which is a massive pain in the but.
I had created a post here which I will leave open for now and see what the outcome is. I have searched and its clear others are having the same problem.
Come on Mr. Nokia ... time to have a look at this as I have had x3 N8's replaced because of this, and in 1 instance I was fortunate enough to show the team @ Vodafone, do I now have to show the Optus team the same issue's.
Thanks.

Speed dial save issues

Doe anyone know about a fix for the Droid Eris speed dial issue. After the software update, I was re entering my speed dial contacts but info wont save. I can select a number and a slot thats marked available but when I hit save it doesnt.

Lovebug1018 wrote:
I also had this problem and it seems that by doing a factory data reset (once the upgrade is installed), they work again. I also contacted my local Verizon store and they didn't even realize it was a problem.
Just make sure you back everything up with your preferred method and then after the factory reset, re-sync your phone.
Hopefully this will also solve your problem.
Maybe I'm dumb, I've done a bit with my Droid Eris, but I have no clue how to back up the phone (especially my apps, god forbid I would have to re-download all of those) I'm sure my phone could use a hard reset, I seem to have a problem that my phone randomly turns its sounds off, i.e.. no sound when phone rings, can't hear peoples voice and vice-versa. The only way I've been able to solve that problem as of yet is just to power off and back on again.
My phone needs the help of Jesus himself! Or just someone who knows what their doing a little better than myself.

N8 Speed Dial

Any body encountered a problem with the Nokia N8 speed Dial? when I keep pressing a number assigned to a contact, the phone freezes and reboots...
Any help?

Yes I have the same issue, although I have'nt worked out what causes it to do this there is definately a problem.
Some are saying it might be the use of various characters like these " [ { ( ) } ] ' etc, but I dont use these in my contacts as I found out a long time ago some mobiles just dont like them.
Although it does not happen all the time, the frequency I found was about 3 out of 10, when it starts doing it it will continue to do it for 2 or 3 times in a row.
Currently I just dont use speed dial, which is a massive pain in the but.
I had created a post here which I will leave open for now and see what the outcome is. I have searched and its clear others are having the same problem.
Come on Mr. Nokia ... time to have a look at this as I have had x3 N8's replaced because of this, and in 1 instance I was fortunate enough to show the team @ Vodafone, do I now have to show the Optus team the same issue's.
Thanks.

How to recover Missing speed dials Assistant Console Lost after DBreplication problems

Hi everyone,
Does anybody knows where i can recover lost speeddials (contacts) from Assistant Console (IPMA Solution) in Call Manager Backups or RTMT files?
I have 1 cluster with 2 call managers 7.1.3 (PUB and SUB) , the phones registered to SUB and the IP of PUB configured in Assistant Console settings.
I had a problem with replication of database between the 2 cucms , after i resolved the problem the IPMA solution start to work but some assistants lost part of their contacts in aplication , seems like they return to an old state , they not lost all , but some contacts (maybe the last added) .
My question is that i want to recover , somehow , the lost contacts , even in the "paper" format , in pub or sub.
I know tht i can restore the old database , but maybe the old database was corrupted because of dbreplication problems.
I read already the "Troubleshoot Missing Speed Dials Issue in IPMA Document ID: 111006" : http://www.cisco.com/image/gif/paws/111006/ipma_speeddail-00.pdf
and its useful only to backup the actual contacts , not the missing ones.
Best Regards.

Hi Robert,
We have exactly the same issue.
We have opened a TAC case and the workaround was to download the new IPMA client from the Cisco website but unfortunatly that haven't solved the issue...
Have you found something on your side ?
Regards,
Nicolas

Nokia 6300 speed dial issue?

Similar Messages

Maybe you are looking for