Nokia 6303c Problem with camera, says camera on st...
nokia 6303c Problem with camera, says camera on standby solution, any body got any solutions
many thanks in advance
try to free up some of your phones memory delete unwanted files ,delete text ,images etc or move to memo card
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520
Similar Messages
-
i have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please
Did you buy PSE in the mac app store? If not, just go to Help>Updates in the editor and update camera raw and you should be able to open the raw files in PSE 12 directly without the DNG converter.
-
I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album as a proper image. Besides, I have also experiences the camera working a bit wiered (slow and often blanks out the moment I am ready to take a photo). Any help on this pls?
Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN -
I have got problem with my pc-cam 950 slim
I have got problem with my pc-cam 950 slim. When I press the power button, the busy light goes on for seconds then it is shut down again so the camera doesn't work. Please help me with this problem. I tried to connect it to my PC put it didn't work either.
Thank you for taking the time to help me.Originally Posted by Colin-CL
Hi,
Have you checked that you have put in brand new 2 x AAA batteries?
Connecting it to your PC will allow you to use it as a mass storage device after installing the relevant operating system (Microsoft
hi,
Yes, I put two new batteries
When connected to the computer nothing happens
What can be done to reset it?
By replaced capacitor problem can be solved? -
Problem with the back camera in iPhone 4 (Black Shadow)
Hi, I have a problem with the back camera. When turned on I can see a black shadow on one side and when I take the photo, appears in all the photos.
I searched on the Internet to resolve this problem but I haven't been successful. A friend told me that maybe it is dirt that was introduced into the cover but I don't think It's true.
The iPhone haven't dropped me for some quite time and don't crashing.
Look here is a photo to show you how the black shadow looks like:
Please, anyone know what the problem can be?It certainly does work.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
Problems with the front camera on iPhone 4
Hey, guys. Just faced a problem with the front camera on my iPhone 4. So, when it's enabled this thing is on screen and all the pictures taken on it also has it:
http://bit.ly/epZypp
I've never dropped the phone, it isn't jailbroken or unlocked, it was bought in Britain but using in Russia, the firmware is 4.2.1.
So, guys, can you help me?Have you tried resetting your phone by holding down the sleep/wake button and the home button at the same time until the phone restarts?
-
having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
I bought my iPhone 4s 16gb just a week ago and Im having problems with the frontal camera.. is blurry... anyone has experimented this issue too? please let me know!
Did you put a screen protector on the phone or did you pull the protective film off the phone?
-
My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost -
Problem with Xperia Z1 Camera and cannot save to SD card
I bought kitkat version of Xperia Z1. There are two issues of cameras.
1: Cannot save images to SD card. Saving fails 100 percent.
2: Front camera issues
2-1 Front camera freezes with black screen.
2-2 After test (Dial *#*#7378423#*#*), The result says Camera does not connect to device.
Some users are experiencing the same problems.
Although I reported these issues, Sony has not replied yet.
Probably, after Android updating to Kitkat, those problems appear.Repair your phone with
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Problem with threads and camera.
Hi everybody!
I've a problem with taking snapshot.
I would like to display a loading screen after it take snapshot ( sometimes i
have to wait few seconds after i took snapshot. Propably photo is being taken in time where i have to wait).
I was trying to use threads but i didn't succeed.
I made this code:
display.setCurrent(perform);
new Thread(new Runnable(){
public void run() {
while((!performing.isShown()) && (backgroundCamera.isShown())){
Thread.yield();
notifyAll();
}).start();
new Thread(new Runnable(){
public void run() {
try {
this.wait();
} catch(Exception e) {
exceptionHandler(e);
photo = camera.snapshot();
display.setCurrent(displayPhoto);
}).start();This code is sometimes showing performing screen but sometimes no.
I don't know why. In my opinion performing.isShown() method isn't working correctly.
Does anyone have some idea how to use threads here?Hi,
I've finally managed to work this fine.
The code:
Object o = new Object();
display.setCurrent(perform);
new Thread(new Runnable(){
public void run() {
while(!performing.isShown()){
Thread.yield();
synchronized(o) {
o.notify();
}).start();
new Thread(new Runnable(){
public void run() {
try {
synchronized(o) {
o.wait(1);
} catch(Exception e) {
exceptionHandler(e);
photo = camera.snapshot();
display.setCurrent(displayPhoto);
}).start(); -
Problem with Photos in Camera Roll after 4.0.1
Hello,
I have a 16GB iPhone 3G.
I updated to iOS4.0 the day it came out, and other than the slowness that everyone else was reporting, I didn't have any other issues.
When I updated to 4.0.1, everything seems a touch better performance wise, but I found a problem with my camera roll.
First, when I opened the Photos App, there was no thumbnail for Camera Roll (all others were ok).
I opened the camera roll, and the last 50 or so pics that I had taken, were all showing as one big Black blob (not individual black thumbnails, they were all joined)
If I scrolled up to older pictures, the older ones were fine.
I took a new picture to test it, and that one looks fine.
So now I can see all my OLD pictures, and any NEW pictures I take, but those same 50 pictures were still showing as one big BLACK blob.
I can still access the pictures if I touch them, and I can flip through them without any problems. I can also copy these photos from my phone to my PC, so the pictures themselves seem to be fine.
And after copying them to my PC, what I noticed by examining the timestamps, was that the problematic pictures were all taken after I updated to iOS 4.0. It seems that all pictures from 3.1.3 or earlier are showing fine, and now all pictures taken with 4.0.1 are showing fine as well. So only pictures taken with 4.0 seem to be affected.
Is there anything I can do to fix this?
(Just for the record, my phone is not and has never been jailbroken.)There is a solution!!
After installing iOS4.0.1 update on my 3G, I too had the black
blob in my camera roll. As posted in an earlier thread, here's
one way to resolve this problem. It worked for me!
Just email the photos that don't appear in the camera roll to myself,
delete the offending photos and then re-save them from the email.
A bit of a pain but it's a way around it. Good luck!
ErikV -
Problems with iPhone 6 camera and snapchat
So I got an iPhone 6 with 16 GB of storage for christmas. Overall, I'm very pleased with it, but the one thing that has been bothering me is the camera; both the regular one and on snapchat. Nothing is wrong with the front camera, but it is the camera on the back where there are problems. On photo, square, and the insatgram camera, nothing is wrong except the screen gets a little darker, but the screen gets noticeably darker on video, and almost completely dark on time-lapse, slow-motion, panorama, and snapchat. I know for a fact that the problem is not caused by my phone's case, the screen's brightness, or anything else in front of the camera, focus, HDR, etc. I've read that the problem with snapchat is that the application itself has not yet been updated and optimized for the newest iPhones, but maybe there is another problem with the phone itself. I'm probably going to just take it to the apple store but I'm wondering if anyone else has experienced anything like this on their iPhone. By the way, I am on IOS 8.1.2
Service issues could be for any reason, location cellular carrier problems, anything. The phone heating up, does this mean you were using the phone for a period of time? If you are using the phone for things, it will heat up some, as the processor works, the way to dissipate heat is through the case. There is no fan like on a computer. The end call button is a red circle, so I don't see what the problem is there. On the iPhone 6, there is a Reachability feature, which allows you to slide the view of the screen down slightly to allow you to access the top part of the screen without moving your hand.
You have the ability to take it to the Apple Store to get the device checked if you like, just make a Genius Bar appointment. -
Trying to download my pictures to IPhoto with my new Nikon S6300 camera keep getting the message the file could not be imported as the file is unreconizable format. I had no problem with my old Canon camera. Please help
I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
However today I tried to download six photos.
None would download including several others for a total of 21 that would not download.
Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
(1) Put a fresh battery in the camera - same results
(1.5) Used a different port in the new hub - same results
(2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
(3) Tried again using the cable - still same error
(4) Changed cables - my husband has the same camera - still same error
(4) Put the card in his camera with his cable - still same error
(5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
(6) Moved the offending one image to the Trash while the card was in the card reader
(7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
Conclusion:
Not the camera
Not the cable
Not the hub
Must remove bad photo from the card
However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
Any idea why this is happening now?
Thank you -
Interlace problem with fast pans, camera moves... any advice?
Hello: I have a video project, edited in FCP (from SD DVCAM tape source). I exported as a standard 4:3 Quicktime movie, and then encoded as H264 video using the multipass 3ivx codec in Cleaner.
I now get a blurred horizontal line on camera pans. The blur appears as a broken line on the lower third of the picture.
Should I not tick the "Adaptive" box?
I have tried using the de-interlace Eliminate Top Field and the Interlace Auto settings. In both cases I ticked the adaptive box. In both cases I still get a blurred broken line in the lower third area of the video on camera pans.
I tried a third experiment using DVFilmMaker. I set it up to de-interlace only on movement, and to blur horizontal lines on Motion (thinking this might help to at least give a more natural look to the picture break-up I was already getting).
Alas, no improvement.
Yes, if I had a time-machine and extra bucks I would have shot Progressive... but I didn't... so I'm trying to get the best out of what I have.
Any thoughts... anyone?
Thanks
A
Message was edited by: Adrian Smith4Thanks for the info. Just for the record, I have tried all these things too in Compressor, QTPro, Cleaner and DVFilmMaker. I get the same problem with all (a blurred line on fast camera pans)
My preference for Cleaner (and it's only my opinion) is that it has a more intuitive user interface for correcting gamma, color, image size, bit-rate, without having to search or go to multiple menus. You also see the video as it encodes and visually check any problems with gamma, etc. You can also do a visual before/after check. I guess it's the devil I'm used to.
Thanks for all the info re. alternatives to Cleaner... but it's not really addressing my original (and existing) problem.
Thanks
Message was edited by: Adrian Smith4
Message was edited by: Adrian Smith4
Maybe you are looking for
-
I need help I turned some mode on that makes me duoble tap whatever i want to open it say whatever it is i am touching and I cant figure out how to scroll to turn it off
-
How do I use both a dtd and schema during parsing?
Hi I have this akward problem. I have created at schema for or DOM parser to validate up against. Thats all fine. The problem arise when I want to use entities in the xml like æ å which are special html esc. sequences for danish letters. Then I found
-
Can I use a north american iPhone4S in Europe?
can I use a north american iPhone4S in Europe?
-
Excel 2007 HTML issue losing pictures on saving.
We have an excel document that we download from a website and then save to the desktop. We then open the document and make changes then save we lose the pictures that were there previously. The strange thing is this was not an issue until we moved to
-
Greetings, At my work we have recently introduced iPads and Apple TV's onto our campus WLAN. In order to get the Airplay to work I am utilizing the VLAN Select and Multicast VLAN features on the controller. Although it is working beautifully, I am no