Nokia 6303i reinstall software issue

Hi all,
Here's the deal. I connected my 6303i to Ovi suite and checked for sw updates. Didn't find any new updates but it offered to reinstall current sw version (10.80). I've been using my phone for some time and I thought a reinstall would be a good idea - to get a fresh start. However, after downloading the sw, somewhere in the middle of installing it Ovi suite says something like "Device connection lost; unplug usb cabel, reinsert it and press OK"; did that a couple of times and always got the same message. Finally I gave up and canceled sw installation - got a scary warning message that my phone can stop working. I started my phone and everything seems to be ok - I even got back 2 of the games I had previously deleted. Now I'm wondering what went wrong during the reinstall. If anyone has an idea, please share. Also, how does reinstall work - does it recover original firmware from a rom or something if reinstall fails?
I also notice something else that seems weird. I previously installed a theme and then deleted it. However, when I restore factory settings (settings only, not all) - and even after the sw reinstall attempt - I see a quick flash of the wallpaper of that deleted theme when the phone restarts. Not that it's such big a deal, but it bugs me that I don't what causes this - wallpaper stored in some temp memory that hasn't been flushed or what? Any ideas?
Thanks

Hello funny name,
idea behind re-installing fw is to remove any bugs from your phone or it is useful only when you have some fw issues, if your phone is working fine don't even bother to re-install fw as it is usuall the same what you already have,
if you still want to do the re-install use nokia software updater, it is a one time free download of almost 35MB, and is available on nokia site,
i use it and it works fine. (sorry, replying from my 6303i so cannot give you short cut to link)
maximum complains i have seen about fw update are from people who use ovi suite to update their fw,
idiots at nokia should take a note of this,

Similar Messages

Nokia 6303i classic software update

Hi,
I bought new nokia 6303i classic mobile phone. Currently my software version is V06.61 . But when i browse internet that current updat reaches V 7. How can i update ? When i try to update , it shows that you have installed latest software. No updates avaliable. Help me

I have the same problem as well, any answers, furthermore it no longer saves the settings for wallpaper/screensavers
Tamburaan wrote:
I upgraded the software for Nokia 6303i classic from V 06.61 to V 07.10. It was a mess after that. All my phone settings, contacts, messages, calendar entries, logs, everything were wiped off just like that. Either I did not notice this warning or nokia itself has missed out to highlight that this will happen.
Anyways, my major concern now is that I have lost the default applications and games that came along with it (sudoko, calculater, etc). I have tried to install it from many sites but it does not suit even though it is listed for this model. (via nokia PC suite)
Does any one know how to fix this? I desperately need atleast the calculator which came along with the phone. I have tried to reset it to factory settings – ALL – but nothing helped.
The clock will always show right in the middle left of the screen and you cant put it up right on top I guess.

Uninstall/reinstall software issues.

Have HP C4599. Trying to reinstall software after uninstall. Not sure if fully uninstalled.
during install stated system could not find file specified. Error report sent and then system downloaded files from internet and then install continued. Stopped after time advising that HP installer uninstaller stopped working. Windows close program and notify if solution available. Nil info received. Appears I cannot take any further action. can anyone assist.

Hello there! Welcome to the forums @Tassie1
I noticed your post about the installation that may not be completing successfully, and I wanted to share my suggestion with you, that might help!
Try a level 3 uninstall to completely remove all of the HP printer files, and then reinstall the full driver. The steps are as follows:
1. Click Start and type %temp% in the run field, press enter to open the temp folder
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
3. Open folder Util
4. Open folder CCC
5.Run the L3uninstall.exe (may also be a .bat file)
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers from here: HP Photosmart C4500/C4524 All-in-One Printer series Full Feature Software and Driver
10. Run the download and reinstall the printer
Please let me know if that helps and what happens!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Nokia 6303i (s40) Alert, Calender, Sound & Volume ...

Hello,
i have found that we can select a sound for Phone Ringing, Calender Reminder, or Alarm Clock separately. Seems to me though that there is no Volume Options for the Calender Application or the Alarm Clock.
Do i miss something?!
Nokia 6303i classic
Software v 06.61 08-02-10
Regards,
Panos

no there is no volume selection for these
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Nokia 5530 XM, phone software issues/headaches

Hello,
I got my 5530 XM around 2 months ago. It was my first Nokia (been a Sony Eric fan for over 5 years). Anyway i liked its touch interface and all.
But then i noticed the phone would restart (reddish/grayish horizontal lines leading to a white screen and then reboot) on average once/twice a day randomly.
I used the nokia update software to get the latest firmware, with that applied, the restarts frequency was decreased. But around 3 weeks ago, i noticed th phone would become unresponsive at times. Like i'd click on a menu item and i'd hear the small vibration of the force feedback, but nothing would launch, in such situations the phone won't respond to any touches, other than lock/unlock slide key and the turn on/off switch.
The only way to get out of that is to restart the phone. But this unresponsiveness is really annoying. I also did a re-install of the firmware from the nokia-software-updater 2 days ago, but the phone still gets stuck in unresponsive state. Sometimes you get unresponsiveness while you're receving a call. You can click all you want to accept the call but nothing would happen. sometimes i have to remove the phone cover and take out the battery and then put it back in and start the phone again to make things go back to normal.
Other than that, at times i'm unable to launch the camera. Its such an embarassment to be a nokia users, 2,3 times at party with friends i had to take some pictures with my NEW NOKIA 5530 and i noticed the camera wouldn't launch (From applications > Camera), there is the small circle on top of the camera icon (that appears for minimized applications), but clicking the icon does nothing.
Even restarting the phone doesnt help.
My phone is still within its 10/12 month warranty period. but i'm truly disappointed in nokia's software. Can someone please help me fix this problem? i've never faced any software issues with my other brand fones and i really love the touch feature of this phone and the interface but the UnTested Operaing System from Nokia is really becoming a headache for me.
Being a software engineer myself, it makes me wonder if there is any quality assurance going on in software departments at nokia. I remember watching a Nokia video on youtube showing how nice and long their hardware quality assurance tests were > which lead me to buying nokia 5530 as my next phone, but this software, it makes me dislike the phone more every passing day
someone help please....
- A new nokia user
Message Edited by milkywayer on 07-Jan-2010 09:12 AM

hi!
i also have dis problem wid my nokia 5530.igave it to nokia care centre they updated my software version but again i am facing restarting problem.red or green lines appear and my phone reboots.i am a nokia user.i had used many of nokia's models but never faced dis restarting problem.i also want help 4m anyone.
thanks 2 all

Nokia C3-01 software v 6.0 having same issues as e...

Nokia C3-01 software v 6.0 having same issues as earlier chat and email not working please help

I couldn't find any post or instruction on how to record the conversation make during call, which could be done by pressing the record UI in the option menu.
The photo have lots of noise, even my beloved 7610 2.0 mp are more clean
The menu UI at times reluctant to response
Switching between different provider will automatically changed the UI menu
Downloading mobile internet content at times seems to begotten by the phone halfway thru other then that chick are looking by the Conner of their eyes at me or the phone which I am not sure

Nokia 5310 software issue

Hello, I dont know if this has been answered before or are there any solutions to this problem but my Nokia 5310 shuts off by itself right after the Nokia "handshake" logo. This happened right after i formatted my microSD card and dont know what else to do. Is there anyway to reset the software or something cuz i dont wanna send it to Nokia for repairs

I only had music on my microSD but i when i took the microSD out thats when the problem occured. I did some googling and it turned out that stock Nokia 5310 had software that didnt rly like .mp3 files so occassionally my phone reset itself when i listened to music. But when i found about about this it was a bit too late :\
Message Edited by Shevagoal90 on 27-Oct-2009 09:36 PM
Message Edited by Shevagoal90 on 27-Oct-2009 09:37 PM

Could not connect Nokia 6303i via USB cable to Win...

Hello guys in this forum
Hello driver development group
This is not a question for help, but more a question for sharing experiences. I recently bought a new Nokia 6303i, worked a little bit with it and finally I wanted to connect it to the PC to enter the contacts from my old phone with the computer keyboard instead of the phonebook keys.
Well, the installation sounded quite easy at a first glance: Download the Nokia OVI suite, connect the Nokia phone to the PC and go on. I did that way, but it just did not work.
The PC I'm using is an Acer laptop, Windows 7 64 Bit system, MS Office 2003, Visual Studio 2003/2005, Firefox, Thunderbird and VMWare Workstation, Comodo Firewall and free-av virus scanner installed. Nothing special, nothing I could not handle, especially no games or other special hardware drivers that could interfere -- most software is installed in virtual machines, so the main computer is rather "naked". I connected the phone to the PC in the "Mass storage mode" to get a drive letter, and installed the OVI suite from the SD card. Worked quite well, and finally I re-connected the phone to the Windows PC.
The phone was detected as "NOKIA" in the Windows explorer. I chose "PC Suite" on the phone and started the OVI suite - but nothing. OVI suite told me: "Detected device: NOKIA. Phone is not in PC Suite mode". Eeeh?!?
I tried it several times, but no chance. Although "PC Suite" was active on the phone, the phone was not recognized. Ok, I though, either a problem with the drivers or a hardware problem. So let's see what an older operating system would tell me. I switched on a Windows XP 32 Bit system in my VMWare virtualisation software and connected the phone. The phone connected but did not directly work. I had to use the "mass storage mode" setting to get a drive letter. I installed the OVI suite that was shipped on the SD card (which deleted itself from the SD card later -- baaad habit, I was hopelessly searching for it later on, but ok...). Then I disconnected the phone, reconnected, chose "PC suite mode" and... perfect, stable connection, OVI suite was working totally fine! So I disconnected the phone and closed the VMware machine again.
Ok, so a problem with Windows 7 64 bit. I deinstalled the OVI suite, downloaded the most recent version from the web which obviously was said to support Windows 7 64 bit, installed, reconnected the phone... nothing. Same situation as before.
I deinstalled OVI suite again and downloaded/installed the most recent version of PC suite -- which was said to contain all connectivity drivers including for Windows 7 64 bit. I connected the phone started PC suite and... well, phone detected, but used in "compatibility mode", although the "PC suite mode" was chosen on the phone. But ok, let's see what I can do in the compatibility mode. Full of hope I clicked on the "address book" in PC suite. The phone reacted, it said "PC suite mode activated". Hoping... Hoping... then it said again "PC suite mode activated". Eeh? It is already activated!?! 10 Seconds later: PC tolds me: "Phone could not be switched to PC suite mode. Shhhhh*t!
I googled as hell, and then I saw that I should use the PC suite cleaner before installing. Ok, PC suite deinstalled, PC suite cleaner used, PC suite reinstalled, phone connected... nothing, same behaviour.
Next tip I read: Install the connectivity driver manually. Ok, everything deinstalled (and I mean, everything! All components in the program list that were entitled to be from NOKIA: PC suite, the two drivers and something else I cannot remember). I downloaded the connectivity driver, connected the phone, phone was recognized as "NOKIA" like before. I installed PC suite again and... nothing. Same behaviour. Arrr*h!
The final tip that really helped: I read somewhere in the web that Windows 7 was using the wrong drivers. I took a look in the control panel, looked up the NOKIA phone in the device manager, took a look to the drivers, and indeed. The driver that Windows 7 was using was somehow from 2008!?! So that was an internal driver of Windows 7 and not the newly installed Windows 7 driver which I manually installed!
I clicked on the button "Update drivers" for the "NOKIA" phone and manually chose the connectivity drivers in the "C:\Program Files\NOKIA\Connectivity..." or-something-like-that folder. Suddenly the phone was re-recognized: "NOKIA phone USB parent". That was new!
But now, the PC suite on the PC did not recognize the phone at all andmore. Hmmm, a new look to the device manager revealed the reason: A couple of new devices were detected, but all with an exclamation mark. Drivers not found. But with a little bit of luck... I opened every such device in the device manager and told Windows to update the drivers. It asked me for a path where the drivers were saved, and here I just specified the path of the nokia connectivity drivers again (this "C:\Program Files\NOKIA\Connectivity..." or-something-like-that folder). That worked! Now I got one after the other the COM-port driver, OBEX and etc...
At the end I startet PC suite... whahoooo, it works! Phone connected and address book editable! Uff. Nice.
So a deep driver problem.
Then I did a near-mistake: I wanted to update the operating system on my NOKIA phone. I installed the phone update manager in Windows 7, left the PC suite, started the update manager and it immediately recognized the phone. I started it and in told me: "Do not touch the phone or anything", time 15 Minutes. I waited and waited and saw the phone screen disappearing, but ok. I saw the USB drivers being disconnected and trying to be reinstalled, but Windows did not recognize it. But I did not touch anything. Then, the Hiobs-message from the update manager: "Phone disconnected during update. Please swich on and reconnect". Whaaaaa?!?!?
Ok, disconnected the phone, switched off, switched on, reconnected. But Windows 7 did not recognize it correctly anymore. Some unknown devices in the device manager, only the "NOKIA phone USB parent" was still working correctly, and there was now an unknown device which I was not able to activate by specifying drivers manually (it was most likely a USB flash device what I figured out later). And the phone behaved strangely, sometimes crashing when hoovering through the menues... EEEhhh.....
Ok, emergency plan, phone nearly destroyed. I again turned on my VMware and connected the phone to the OVI software in the virtual Windows XP. Still worked fine. I clicked on the update menu item of OVI suite. OVI suite was detecting the phone software, downloaded the new version and started to update. Again it told me: Wait 15 minutes, do not touch anything. And I did. I saw Windows reconfiguring its hardware settings as new hardware was detected, and there were problems in installing a "USB flash device", but the software did not cancel. And finally: Update successful! Uff... I checked the phone (*#0000#), and it was ok. Uuuuh.
Then I switched off the virtual machine, conected the phone again to Windows 7, but there was still a driver problem. Most devices had an exclamation mark. I manually deinstalled all the NOKIA drivers in the device manager and actuivated the "Delete driver from system" checkbox whereever possible -- including the "NOKIA phone USB parent". I removed the phone from the USB cable and plugged it on again. Now windows re-recognized it as "NOKIA" phone, but again used its own internal -- wrong -- driver set. I switched the driver again as described above to the Nokia Connectivity drivers in the program folder, got again the "USB parent" and the unknown devices, manually specified the drivers for the unknown devices by using the path to the Connectivity drivers and finally I got the situation from before the update: Nokia PC suite running fine, I can access my contacts and do anything I like in Windows 7 64 bit.
That was a nightmare and took me about two days intensive research and testing. What a mess...
I hope I could help anyone of you with this when you have trouble installing the PC/OVI suite in Windows 7. And don't try to update the phone in Windows 7, it's dangerous at the moment!
Probably you guys from the driver development can take a more close look to Windows 7 64 bit and its own pre-installed drivers. Does anyone of you have similar experiences?
Best regards,
Mighty Knife

Uhm, I'm experiencing the same problem with some Linux relase. Unfortunately I was unable to solve the problem if not installing a windows emulator. Maybe you're already familiar with it, but it seems the only solution. Through google I found this, I hope I made you a favor.
http://www.macwindows.com/emulator.html
Bye

Nokia 7373 reinstall firmware ?

Hi, Many thanks for checking this out,
My wife's phone seems to play up a little like the clock keeps loosing time, when I set the time it seems to loose almost an hour with a couple of hours I have got auto update turned off and set to gmt 0 and I wondered if I reinstall the firmware it would help it out a little but how is this done via a pc please.
Regards, Wayne...

It is possible that a software issue causes the time lapse, all you need to do is download and install Nokia Software Updater from www.nokia.com/softwareupdate and run this on your phone.
However, there is an equally high chance that jimmyireland is correct. What are the charging habites, is the phone allowed to run low or is it charged daily? If the main battery gets very low and the internal battery is faulty then there is no backup power to kick in and take over running the clock

Nokia's PC software doesn't work!

I'm having some serious issues with Nokia's PC connectivity software.
PC Suite first of all - for the most part is fine, but what I want the most - the Nokia Software Updater - won't work. I get one of two messages:-
'Configuration Error' - I've tried everything I've seen suggested on this and other sites, to no avail. Or I get a message saying one or more software components has stopped responding and I need to reboot my PC - I try this and still get one of these error messages.
So, I've uninstalled PC Suite, and used the PC Suite Cleanup tool to remove everything, I rebooted my PC and installed Ovi Suite. And what a load of trash that is.
Again, it's one of two error messages I get. I either get a very non-specific 'internal error' message , or I get the Windows 'Nokia Ovi Suite 2 has stopped working.......' message.
This sucks, big time. All I want to do is update my E71's firmware!
This better improve pretty damned quick, as I've just commited myself to another 18 months with another Nokia handset (against my better judgement) and my X6 arrives tomorrow.

Thanks for the replies people, but it's all a moot point now as the X6 I upgraded onto with my network provider decided to die on me after less than two days.
As a result, I've ditched the X6 and am getting a phone of a different make and model altogether, thanks in part to the understanding of 3 UK - there was no way I was taking a chance on another X6 when the first one died after such a short space of time.
I would say that I uninstalled PC Suite and used the cleanup utility before reinstalling Ovi Suite, and still found that it didn't work.
I may bear this all in mind as I still have my E71 in good working condition, but I fully intend for my new phone to be my primary handset with the E71 as a backup in case of any problems. I do have to say though that my experiences with Nokia's PC software has made me very frustrated, and the issue with the X6 has made matters worse. I don't think I'll get another Nokia handset in future, unless serious changes are made.
PC software which just works would be a good start. I wouldn't like to say how long I've spent trying to get it to work as it should, but it is a stupidly long time. I've never had this issue with the software supplied by Sony Ericsson or LG. Secondly, Symbian either needs to be improved or ditched - it's slow and buggy, and being left behind by much newer OS's, such as Android.

New To Nokia And Having Some issues With N79

Hi
I have bought a Nokia for the first time ever and fancied a change from Sony Ericsson due to software issues, however i have been experiencing a few issues with my N79.
When listening to Music in the Music Player and change track, the phone will crash and keep restart it's self, so i tried searching online for the issue and didn't find much help, so i tried doing a Soft Reset wich didn't work.
I then tried a Hard Reset and have noticed some icons are missing and the preinstalled Wallpapers, Ringtones and Videos have been deleted.
I then downloaded and installed Nokia Software Updater and tried re-installing the phones software (wich is 11.049.53.1) thinking i would get back the Wallpapers, Ringtones and Videos ect but that didn't work...
And now the phone has developed another bug... Whenever i use the GPS it asks to go online and i click yes, the phone will just crash and restart and i have to take the battery out to get it to go off.
So far i am NOT very happy with the phone concidering the price i payed for it and having more software issues to deal with...
Any help would be appreciated...

Which map do you mean ??? And will it restore all the preinstalled content ???
Ive only had this phone a week after paying nearly £300 and im having trouble with it already...
Message Edited by jb1989 on 08-May-2009 01:40 AM

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Keyboard and trackpad unresponsive - software issue

Hey guys, first time on the forum but I have quite a severe problem.
After a forced shutdown (stupid I know) when I try to use my MacBook the keyboard and mouse are unresponsive (even the caps lock light doesn't work). I know this to be a software issue because I tried using a Linux boot disk to rescue my data, however I couldn't find the HD using this method. I have also tried using a USB mouse but again to no avail. Does anyone have a fix? If not any way to backup my data before trying to reinstall leopard? (I am running the latest leopard update).
Thank guys.

I am having a similar problem, all except i didn't force shut down. i cant backtrack to the ver. from my install disk because i cant open it due to the fact my mouse and keyboard don't work. i've tried a usb key/mouse combo and they don't work either. any suggestions would be appreciated

Lion 10.7 Only Boots in Safe Mode. Is This a Hardware or Software Issue?

Hi. On my iMac late 2009 i7 8GB bought last March only. I reinstalled Lion (I didn't erase the whole disk because I have Boot Camp Windows and I have filed there) and it can only boot in safe mode if I use the Mac's built-in EFI bootloader (where you have to press option on restart) menu then press shift after choosing the iMac OS X hardisk. I've been trying to fix it for around 4 days now today. I'm tempted to take it to the authorized Mac shop but that could take weeks to months in our country. If I let it boot normally, it would seem to have a kernel panic and would stop at the white/gray screen. Verbose mode showed that is stopped at something 10 of these like: nstat fail.
Is this a GPU hardware problem, specifically the 3D element of this 4850M GPU? I'd like to do load each kext, each extension manually but I can't find them in Lion. When I use the Lion DVD or the Lion Recovery partition, it's very sluggish, every click and process takes 20 seconds to minutes. If I try to boot in Linux, Snow Leopard DVD or Snow Leopard external hardisk, there seems to be a kernel panic. It's either just a black screen or a garbled screen.
I want to erase/format the iMac's hardisk but in Safe Mode, it can't be mounted even if I use Disk Utility. If only there's a way to force it to mount, I can save some Windows 7 file to one of my external hardisk or flash drive. Does anyone know of an app or program that can mount NTFS files on Lion's Safe mode?
If it's a Lion bug, has Lion somehow corrupted the Mac's built-in (hardware not the EFI partition in the hardisk) EFI or somehow corrupted the Mac or GPU's ROM? Could it be a new OS X virus? Should I then perform in Safe Mode to flash the GPU ROM and the Mac's ROM again (I have the latest)?
Do you think if I erased the whole drive, reinstalled it again with either Snow Leopard (assuming it doesn't boot into a garbled screen) or Lion things will go back to normal?
Has anyone experienced something like this? What was the culprit (was it a hardware or software issue) and what was the solution?
Gbu.

Hi thanks for all the concern and replies. I've tried all that.
I had just got it back from the shop last Friday. It was there for around two weeks. It was a faulty GPU (when you see garbled display that's consisten when booting it the GPU). I have a strong feeling it's related to the Lion install 10.7 or 10.7.1 and may be similar to reports of Mac laptops overheating. It's good the GPU is removable, it might have taken 3 week or a month if it had been the whole board.
It's a blessing in disguise though as with all or most cases because I also got to have the LCD replaced for excessive backlight bleeding (in my opinion), the dead pixel from the previous LCD isn't there anymore (though under the glass there're some smudges but nothing crucial). The backlight bleeding is still the same though in my opinion but at least it's new.
It's a great thing I bought Applecare. I didn't buy it for the iPhone because that's more durable (my iPhone 3G's 3 years old now and it's still solid. Although there are scratches and a crack at the back at the bottom, got sqeezed under the table I think when I sat). I think Applecare is a good recommend for things that get hot like desktop and laptop Macs(are the iOS considered Macs btw?) which are twice or thrice the price of iOS devices.
Gbu.

G5 Quad - No Airport Reception After Upgrade - Software Issue

Hi,
I've just installed a 'wireless upgrade kit' in my quad (yes, I know it says AASP install only but I did in anyway). Bluetooth is working fine but airport gives me no reception at all.
Now, after some poking around I became pretty convinced this was a software issue. The system I'm running on the quad has been cloned from that on my old DP 2.5 ghz G5. I tried a fresh install on an external disc from the install discs that came with the quad and, lo and behold, airport works like a dream!!
So my question is - is there any way to migrate whatever extensions (or whatever) I need from the 'clean' system to my 'cloned' system so I don't have to start everything from scratch? I've tried an 'archive and install' but still no reception after that so I guess whatever I need must be in one of the folders that was archived...
What software bits and bobs does airport require to work?
Can anyone help me out here?
cheers

I never found a solution to this. Just had to reinstall everything from the discs that came with the Quad. Annoying.
But no airport reception can definitely be down to software!!

Nokia 6303i reinstall software issue

Similar Messages

Maybe you are looking for