Nokia 6500c Battery status indicator

Hey all,
Ive got a prob, On my 6500c the battery status remains full at all times, so I dont know when my battery is about to die,
any solutions?
anything is welcome, thanks

Faulty battery maybe. The battery has circuitry that reports its charge level and it sounds like that isn't working. You should have it replaced under warranty if possible!

Similar Messages

  • Nokia E75 Battery Status Indicator?

    Hello, well i have a problem. on most phones, if you go in the settings, there will be a section where it says all of the phone status. and i find this really useful when it comes to the battery. But on the Nokia E75 i cant seem to find the battery status indicator. Does anyone know where it is?
    ***Battery Status Indicator is where is says how much percent of the battery is left. 

    Faulty battery maybe. The battery has circuitry that reports its charge level and it sounds like that isn't working. You should have it replaced under warranty if possible!

  • Battery Status Indicator (in menu bar) does not update

    I've recently noticed that the battery status indicator in the menu bar gets "stuck," and won't update. I can force it to update by disabling and re-enabling it, or by changing the view style, but if I leave it alone, it won't change, even across sleep/wake cycles.
    Any ideas?

    Actually, the problem disappeared after a reboot. I reboot so infrequently, I didn't even consider that as a solution, but something else caused me to need to reboot, and after that, the indicator works fine.
    Still no idea what caused it to get stuck in the first place, but for now, it's better.
    Good luck!

  • Macbook pro 17" 3g battery status indicator stuck on 100%

    Battery status indicator stuck on 100% Worked normaly until today
    resetting smc does not help
    Battery Information:
      Model Information:
      Serial Number:          9G95201YS4M0A
      Manufacturer:          DP
      Device name:          bq20z951
      Pack Lot Code:          0000
      PCB Lot Code:          0000
      Firmware Version:          0042
      Hardware Revision:          0001
      Cell Revision:          0119
      Charge Information:
      Charge remaining (mAh):          65262
      Fully charged:          Yes
      Charging:          No
      Full charge capacity (mAh):          65262
      Health Information:
      Cycle count:          221
      Condition:          Replace Now
      Battery Installed:          Yes
      Amperage (mA):          -1629
      Voltage (mV):          8072

    I closed the lid for about 10 minutes to do something and when I came back the status seemed to be working correctly (80%) and the health now seems normal. I made no other changes. I will keep an eye on it and post if it goes haywire again. Thanks for your help
    Battery Information:
      Model Information:
      Serial Number:          9G95201YS4M0A
      Manufacturer:          DP
      Device name:          bq20z951
      Pack Lot Code:          0000
      PCB Lot Code:          0000
      Firmware Version:          0042
      Hardware Revision:          0001
      Cell Revision:          0119
      Charge Information:
      Charge remaining (mAh):          9833
      Fully charged:          No
      Charging:          No
      Full charge capacity (mAh):          12217
      Health Information:
      Cycle count:          221
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -1550
      Voltage (mV):          7930

  • What is causing flashing arrow next to battery status indicator?

    I have a flashing white arrow next to the battery status indicator on my ipod touch that is causing music to be unplayable. Everything else appears to be ok. Arrow goes away when doing anything other than music. Any help would be appreciated.

    Could be the Location Service icon . Go to SettingsPirvacy and either turn Location services on or off.
    Next:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.

  • Excite Pro - Battery Status Indicator at 0%

    Battery status indicator is stuck at 0% - battery holds charge ok just don't know what it is. I presume the battery stats file is corrupted - is the only way to fix it a factory reset?
    Calibration either needs root - not possible or 60% charge - won't work as says 0%!!!!

    I think you should set it to factory settings.
    Press and hold power button and volume up button. Then in the menu choose factory reset.
    If this will not work, then the issue must be related to hardware failure

  • How reliable is the Battery Status Indicator?

    I have had my MacBook Pro for a month now, and I don't know if I can trust my battery status indicator a the top of the MacOSX screen
    It usually goes a lot shorter than the indicated percentage or the calculated battery life time.
    I have another issue with this MBP.
    Has anyone actually been able to use MBP for as close to 5 hours which is the battery life posted on the apple website?
    I set my MBP to lowest backlight, no programs or widgets running, wireless and bluetooth off and kept it one for hours. The battery lasted a about 3hours and 49 minutes. Is there something wrong with this battery?

    As you use your MBP on battery it collects information on your battery usage style and uses that to predict battery run times. based on that it's reasonable accurate providing you calibrate your battery ever 4-8 weeks or so. Also, the data it collects the more accurate it can predict your battery time.
    Once you start using your MBP differently though the accuracy can vary but should still remain "reasonably" accurate.
    I personally find the times reasonably accurate altough for the most part I run off the percentage rather than time.
    Has anyone actually been able to use MBP for as close to 5 hours which is the battery life posted on the apple website?
    No-one will ever get 5 hours. As you note from the specs it's "based on usage" or more to the point, it's non-usage. Those time are achieved by having it on my not being "used".
    Average battery times should range from 2.5-4 hours depending on your actual usage.

  • Missing Blackberry Battery Status Indicator

    I've looked all over the web, my instruction manual, the index inside the phone, and in still cannot find the meaning of this symbol in the middle of my battery bar. From what I've seen on the internet, its as almost as if it does not exist. I would probably believe so if it was not for the fact that I am staring at it right now as I type this. I have had problems with the USB port on it before and I am pretty sure that has something to do with it.  Also when Its plugged into the computer and the port and USB are  finally working in unison, the computer says that it is malfunctioned.
    The icon appears when I've tried to connect to it to a computer or even sometimes to an outlet. It looks like a C or parentheses with a scrunched up 3 sort of like this:
    C    3
    or
     (    3
    I was surprised that no one else has seen or inferred about this icon and even more surprised that a complete index of all battery status indicators would exist; including those for malfunctioned or damaged batteries.  Any help or recommendations to help me solve this problem is greatly appreciated.

    Hi silvaback75
    Can you send us a picture of this icon?
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Battery status not updating

    I have recently replaced the battery for my IPhone5 after a crash. After that the battery status indicator is not dynamically updating. It updates only after every restart. I tried resetting all settings, updated to recent IOS7.1, restored several times. But of no use. Please guide.

    Hi,
    I have the same problem with my now replaced iPhone 3G with iOS4...
    I have this problem, when I charge my iPhone 3G with the charger, that was supplied with my iPad. And also the problem can only be solved, when rebooting the phone.
    When charging, the symbol shows the "flash"-sign in the battery to show, that the iPhone is charging and the symbol changes to the wall-connector-symbol, after the iPhone has fully charged. But when disconnecting the charger, the battery-symbol still shows empty, until I reboot.
    The problem occurs with the iPad charger, but it does not occur, when charging the iPhone inside my "JBL radial" soundspeaker-system.
    So I think about a bug in iOS4
    Regards,
    Florian

  • Flip video battery status

      I just got a new Ultra HD Flip camera and do not see a battery status indicator on the screen.
    I used to have an indicator on my Flip mino. Where is the battery status indicator on this device?

    The Flip Ultra HD camera does not have an on-screen battery life indicator.  In a number of reviews for this camera, this is a common "con". Instead, the recording indicator light on the front of the device doubles as a battery life indicator.  You can confirm this with a simple Google search and you'll find many reviews such as this: http://www.makefilmwork.com/2009/04/27/the-flip-ultra-hd/
    Hailey
    Please rate helpful posts!

  • My battery status says check battery

    Hi everyone
    I have a macbook pro retina disp 13inch. i have a problem that based on battery bar menu it says me that check battery. I havent see this situation before. I made the last update from 10.9.1 to 10.9.2 and also made the security update called -002 then i started to see check battery quote in my battery info bar.
    my battery options are like this;
    Battery Information:
    Charge Information:
      Charge Remaining (mAh):          3073
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          5111
      Health Information:
      Cycle Count:          147
      Condition: Check Battery
      Battery Installed:          Yes
      Amperage (mA):          -1132
      Voltage (mV):          11365
    Also i tried to finish my all battery and recharged fully again but i see again the check battery situation on the info bar. when i shut it down and reopen my mbook pro retina
    sometimes check battery writing dissappears but like 15 min later it comes again. What i can do ? What am i supposed to do please help me for this situation. Do i have to
    change my battery or doing another thing? Also i am out of warranty what will i pay for the battery for my MacBook Pro Retina display 13''?

    Did you try an SMC reset?
    http://support.apple.com/kb/HT3964
    Indicators
    After performing normal troubleshooting, these symptoms may indicate that an SMC reset could be necessary.
    Fans
    The computer's fans run at high speed although the computer is not experiencing heavy usage and is properly ventilated.
    Lights
    The keyboard backlight appears to behave incorrectly (on Mac computers that have this feature).
    The Status Indicator Light (SIL) appears to behave incorrectly (on Mac computers that have an SIL).
    Battery indicator lights, if present, appear to behave incorrectly (on portables that use non-removable batteries).
    The display backlight doesn't respond correctly to ambient light changes on Mac computers that have this feature.
    Power
    The computer doesn't respond to the power button when pressed.
    A portable Mac doesn't appear to respond properly when you close or open the lid.
    The computer sleeps or shuts down unexpectedly.
    The battery does not appear to be charging properly.
    The MagSafe power adaptor LED doesn't appear to indicate the correct activity.
    System performance
    The computer is running unusually slowly although it is not experiencing abnormally high CPU utilization.
    Application icons may "bounce" in the Dock for an extended amount of time when launched.
    Applications may not function correctly or may stop responding after being opened.
    Video
    A computer that supports target display mode does not switch into or out of target display mode as expected.
    A computer that supports target display mode switches into or out of target display mode at unexpected times.
    Port illumination
    The illumination around the I/O ports on a Mac Pro (Late 2013) does not activate when you move the computer.
    Resetting the System Management Controller (SMC)
    Resetting the SMC on Mac portables with a battery you can removeResetting the SMC on portables with a battery you should not remove on your ownResetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
    Additional Information
    The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs. These functions include:
    Responding to presses of the power button
    Responding to the display lid opening and closing on portable Macs
    Battery management
    Thermal management
    The SMS (Sudden Motion Sensor)
    Ambient light sensing
    Keyboard backlighting
    Status Indicator Light (SIL) management
    Battery status indicator lights
    Selecting an external (instead of internal) video source for some iMac displays
    Note:  Resetting the SMC does not reset, or otherwise change, the contents of PRAM, which is also known as NVRAM on Intel-based Macs.
    Last Modified: Mar 26, 2014

  • Is there a way to turn on battery status on the iPod touch 5

    Does the iPod 5 not have battery status indicator the same as the iPhone 5?

    No. That display is only iPad and iPhone.

  • Nokia e7 - belle update battery status

    Hi
    i upgraded my nokia e7 to nokia belle recently and I was very excited but after the update I found out that there no longer was a battery status showing the percentage left. I really liked the old battery status so you would know how much battery life is left. It is just a bit weird that a very good thing from the previous version is discontinued on the belle version. I'm sure many others would agree with me on this..
    Solved!
    Go to Solution.

    the battery level in the new structure has the same 7 levels... you can check it out just like that... not necessarily you would need a visible info on the battery level
    anyways
    All 7 parts filled up - 100%
    6- 80%
    5-65%
    4-50%
    3-35%
    2-20%
    1-10%

  • Nokia 1661 How should battery strength indicator ...

    I tried contacting Nokia via 'Contact' about this via their web site, but the form is faulty, so it is impossible to supply a correct message and hence send a message at all.
    I am uncertain regarding how the battery strength indicator should look when charged. This is because, unlike my old phone, a motorola, instead of solid black bars, the bars are of a varying intensity from dark blue to white (from right to left).  There are 5 bars. When I charged it the first time the leftmost bar stayed white. This is only my second time of charging. What should it look like when charged?  What is the likely charging time from when fully discharged? I have asked Carphone warehouse regarding my first charge and they said it was charged when the leftmost one was white and the others a varying shade of blue from light to dark (left to right). I've now charged it the second time for 8 hours and got the one white and varying shades of blue again. I note it says on the web site that a new NiMH battery full performance is only achieved after two or three complete charge and discharge cycles. Does mean eventually I should get all bars solid blue?
    It also says on the web site that ‘When you charge the battery for the first time the battery strength indicator does not scroll the entire time, this is normal. What do they mean ‘scroll the entire time?’ Do they really mean scroll completely to the left so all bars become dark blue? 

    I received a reply which unfortunately did not help at all. Here is a copy of the email exchange. I have asked for a proper response.
    To Nokia
    Thank you for your reply. Unfortunately it does not answer the question posed by me and the other customer. I already have a copy of the instruction book.
    Please kindly read the question which is about the battery indicator, have a look at the phone, and let me know how the battery indicator works. If you do not know, please find someone at Nokia who does know. Many thanks.
    From: @nokia.com
    Thank you for contacting Nokia Care.
    Please accept my sincerest apologies for the delay in responding to your email. We have been facing technical difficulties with our system and have just managed to retrieve your email.
    Please use this web link to assist you:
    http://europe.nokia.com/get-support-and-software/product-support/1661-support/guides-1661-support
    If you have any enquiries and comments, please feel free to email to us anytime, as we are very delighted in assisting you and your feedback is highly valuable to us!
    Keep your phone software up-to-date by using the Nokia Software Updater. For more details visit Nokia Support and Software at http://www.nokia.co.uk/support or http://www.nokia.ie/support. You can also go online to find user guides, troubleshooting support and other services to help you use your Nokia product.
    This response has been given based on the information you have provided us. The response is provided for general information purposes only. It is intended, but not promised or guaranteed to be accurate or complete, and it does not constitute any binding commitment.
    To ensure proper handling, please continue to use the current subject line.
    Please don't hesitate to contact us again if you have any further questions.
    Yours sincerely,
    Adam
    Nokia Service Professional
    UK & Ireland Team
    Nokia Care
    [THREAD ID:1-48VTOIN]
    -----Original Message-----
    [Country: United Kingdom] [Language: English]
    [Permission to Email: ]
    [Permission to SMS: ]
    [Permission to Letter: ]
    [Permission to Phone: ]
    [Street address: ]
    [ZIP: ] [City: ]
    [Nokia Music username: [#music_username#]]
    [Phone model: Select]
    [Order number: ]
    [IMEI: ]
    [Contact topic: Nokia Phones or accessories]
    [Message: I have today received a new Nokia 1661 phone from Orange.The instruction booklet is inadequate over several issues. I have cut and pasted a query from your Nokia support discussion page. I have exactly the same query. Can you help, please?     
    "I am uncertain regarding how the battery strength indicator should look when charged. This is because, unlike my old phone, a motorola, instead of solid black bars, the bars are of a varying intensity from dark blue to white (from right to left).  There are 5 bars. When I charged it the first time the leftmost bar stayed white. This is only my second time of charging. What should it look like when charged?  What is the likely charging time from when fully discharged? I have asked Carphone warehouse regarding my first charge and they said it was charged when the leftmost one was white and the others a varying shade of blue from light to dark (left to right). I've now charged it the second time for 8 hours and got the one white and varying shades of blue again. I note it says on the web site that a new NiMH battery full performance is only achieved after two or three complete charge and discharge cycles. Does mean eventually I should get all bars solid blue?
    It also says on the web site that ‘When you charge the battery for the first time the battery strength indicator does not scroll the entire time, this is normal. What do they mean ‘scroll the entire time?’ Do they really mean scroll completely to the left so all bars become dark blue? "]
    [Operator: Orange]
    [Operating system: Select]

  • How to reset battery status in menu bar?

    After upgrading to 10.5.5 I experienced sudden loss of performance with both of my batteries.
    Overnight the battery yielded only 45 min, and the recharge time was usually about 40 min as well.
    As a result of frustration, I decided to crack open the case of 1 battery and connect a 12V 20W bulb to fully discharge the battery.
    Possibly as a result of the deep discharge, the battery took 6 hrs to recharge, and now yields approx 3-4 hrs of power.
    HERE IS THE PROBLEM. The battery status in the menu bar does not seem to reflect the battery's newly found performance.
    It keeps says "40 min." left, and when it runs out of minutes, it displays: "Calculating ... remaining"
    The same odd behaviour occurs when charging the battery. It says: "35 min" to full charge, and when it runs out of minutes it displays: "Battery finishing charging"
    MOREOVER, yesterday, the low level power indicator appeared, but the computer kept working for another 1.5 hrs before going to sleep.
    Finally the System profiler shows this information
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 1661
    Remaining Capacity (mAh): 1361
    Amperage (mA): -1203
    Voltage (mV): 11441
    Cycle Count: 71
    After the deep discharge, the Full Charge capacity jumped form 640 to 1661.
    That's good, isn't it?
    But how can I reset the battery status in the menu bar to reflect the actual performance of the
    battery? Or did the deep discharge damage something?
    Regards

    I talked to Apple repeatedly and they refused to replace the battery in spite of the many good arguments I brought forward. Their only argument is that the battery is old (was shipped in 2006)
    I even requested them to ask their own technicians whether
    it is normal for a battery with only 71 cycles to discharge so soon.
    My request was declined.

Maybe you are looking for

  • How to use value of Report Rows for another Item heading (interesting)

    Hi! This seem to be interesting question. I have a classic report which has 4 rows with date values. The Row1 has Date1, Row2 has Date2 and so on. The report is structured like this DATE_COL COL1 COL2 Row1 Date1 100 101 Row2 Date2 I want to use the v

  • ALV Report in Production

    Hi Everyone,         We have done ALV report (grid contains 22 columns which belongs to one ztable) in development and we have transported to production system.     and Now we added one more field i.e. not related to ztable that means external field(

  • No confirmati​on email + twice the charge?

    Yesterday I wanted to place an order for Lenovo y50 laptop. The total cost was coming out to be approx. $1000, I clicked pay with debit card and had it shipped/billed to a friend's address in the US (I'm currently living in the UK) and when I finishe

  • Safari, IE "cant locate server"

    Seems to open on safari and internet explorer as the page comes up. But if i click on any favorite it gives me the above message. It has been stored for a few years and just thought id get it out and running again to play with. It did go on the inter

  • KMS Server suddenly stopped working

    Our 2008R2 KMS server suddenly stopped licencing Office 2010 (it still works with licencing Windows 7).  It now returns a 0xC004F038 error code, which is insufficient activations.  From the slgmr below, you can see we have 38 activations, more than e