Nokia 6500c lost its wallpaper animation capabilit...

Hi,
I own a 6500c which previously could display animated wallpaper without a problem, today, I update the firmware to the latest V9.45 and now my animated wallpaper is not playing anymore, all it displays is just like a freezed picture.
Is there any setting that I've missed out here or is it a bug? please help.
Message Edited by pmcom on 06-Oct-2009 05:20 AM
Message Edited by pmcom on 06-Oct-2009 05:21 AM
Message Edited by pmcom on 06-Oct-2009 05:21 AM

Having a similar problem to the OP.
However, it seems to be a "mood" that the phone gets into. When it's like this, no charging method will work -- all previously good chargers get "Charger Not Supported".
Power-cycling the phone (with the charger connected or not) has no effect.
Blowing non-existent dust out of the charging plug and socket has no effect.
I pretty much just have to leave the phone plugged in (overnight usually) and hope that it snaps out of it and takes a charge. Luckily it always seems to do so ... so far, anyway.
I can't help but wonder is this is related to the issue whereby if you run the battery totally flat it can take 5-10 minutes for the phone to realise I've connected a charger.
Anyone else had experience of either of these lovely little problems?

Similar Messages

Nokia 6280 lost its ring volume

Hi can anyone suggest something i can do to fix my phone? over the past few months, my 6280 would occasionally lose the ring volume and then come back in a day or 2. this time however, it never came back! it still vibrates and the keypad still has some volume, but the buttons on the top of the slide part (the red, the green, and all 3 blue buttons) make no noise at all, as well as no volume for incoming calls and texts. i am still a few months away from my end of contract and would rather not have to buy new phone. thanks in advance for any help anyone can offer!

i just called them and they dont have the software yet. they told me to call up on monday to see if it would be available.

My Nokia 6270 has lost its contents

Hello friends
I gave my Nokia 6270 to the preparing center to fix it but they have formated the mobile so it lost its contnts such as tones, applications, and games. Please guide me how to return my mobile's contents
Thanks alot

if you have a backup in your memory card or pc,you can restore you app. and duc by restoring in your phone or Nokia pc suite(content copier) program.
if you have no back up,you have lost all your data
you need to reload the software from nokia care point and all your rintones gallery files all of them which came originally with phone will there.
tongue is too confused on what to speak

Wallpaper animation problem

i have N72 nokia phone. in Image & Video it shows a wallpaper with proper animation but when i set it as a wallpaper in front then no animation view. pls.help me.
thanks

Viewing animation somewhat different from making it as wallpaper. When viewing it the built-in player be it real or whatsover plays it. Some models of Nokia does not support animation in wallaper, & as our m8 kornger have said, the S60 symbian natively does not support it.
This akin to putting an animated gif icon in user of windows. But viewing it with explorer doing animation. You can check some third party themes that do wallpaper animations & supports your phone.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Nokia 1661 - Customize Background/Wallpaper with T...

Hi,
I have a question about the Nokia 1661: in normal mode (ie without selecting menu or anything) there is the small banner at the top that indicates your provider on the left hand side and the time on the right hand side but there is nothing more on the screen.
You can see the picture chosen as a background/wallpaper without any text additions in the middle.
Is there anyway to customize, e.g. to insert text into that space?
(In older Nokia phones there was the name of the profile (vibration, etc.) you were using put right into the middle of the screen).
Thank you very much!

Hi Mujeebrm
Yes Nokia 6151 support gif files as its wallpaper so that they shows all possible effects(frames in GIF files) like in Sony Ericsson or any other Gif enable set. Beside you can use its Video as Sreeen Saver & Video call (like ringtone).
Thanks
PleasureBd

My iPhone 4S lost its official permanent SIM unlock

Hi,
I've had my iPhone 4S officially unlocked by my carrier (Orange France) through Apple.
As instructed by Apple, I restored it in order to fully unlock it. Restoring it is supposed to make the unlock permanent therefore bypassing the need for activation when using different sims.
This worked perfectly until last week (I traveled to the UK and Brazil and used local prepaid cards without having to re-activate it) when I tried using a brand new French Free Mobile sim card. To my surprise, I had to re-activate this iPhone using a wifi connection. This shouldn't have happened as the iPhone had been fully and permanently unlocked by restoring it (iTunes confirmed this after the restoration).
Now, I have to reactivate it every time I want to use a different carrier sim card as if it had lost its permanent unlock.
Activation on a SIM basis works using wifi BUT I shouldn't have to go through this. It looks like the iPhone lost its permanent sim unlock. This is very frustrating. It might not seem like much of a trouble but it is. For instance, when flying to a foreign country, if I want to switch sim cards in the plane, I won't be able to activate the iPhone without wifi connectivity which forces me to "hunt" for a wifi hotspot after landing in order to be able to use my iPhone.
There are many reports of French users having issues with Free sims with either activation or unlock.
My question is simple: if I restore once again my iPhone, how can I be sure the permanent unlock will stay that way if I use a Free Mobile sim card?
Will this problem be fixed soon?
In addition, switching sim cards in a plane is problematic with current firmwares as, when switching sims in a non-permanently unlocked iPhone, wifi is automatically turned on in order to try and activate it without the user actively choosing to do so. So many people will end up having wifi on in a plane when regulation prohibits it.

http://support.apple.com/kb/TS3198
Ps
You are not addressing Apple here this is a User to User technical help community
Apple host and Mod but do not monitor

HT4623 Hi!My iPAD lost its charge fast !!I've got an iPAD capacity 57,1GB and it has available 55,1GB ,version 7.0.4 .I'd like to know how long does the battery last when it is 100 % charged.

Hi!I've just installed the iOS 7.0.4 operating system and the battery lost its charge at an incredibly speed.I'd like to know how long does the battery last if everything is right when it has 100% charge.Thanks!

I`m `propping` up this thread to to the top of the forums again as it`s been three months and not a single community member or Apple support personnel have replied, which I find discouraging.
I`ve tried everything - both the iOS device(s) and Apple TV have been upgraded (albeit reluctantly) to the latest versions, since iOS 7 looks like crap compared to iOS 6. Both use the same WiFi network. Bluetooth is set to `off`, as per the online tutorials on the Apple Support page.
I also tried shutting all of them down, including the router, waiting 30 seconds and turning the router, then the Apple TV then the iOS device on sequentially with 30 seconds in between each, again as per this discussion forum, and still nothing.
Why can Apple not make a technology, such as AirPlay, work with greater than 10%?
Any other ideas?
Come on, people.
Thanks,
Doug

"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." Trying to format my iomega external HD for use with Mac

Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
(Quitting and reopening Disk Utility does not help.)
The following also appears in Console log:
*** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
Workaround
Quit Disk Utility.
From the Finder's Go menu, choose Go to Folder....
Type the following, then click OK: /Library/Receipts
Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
iTunes.pkg
iTunes4.pkg
You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
Open Disk Utility and repair disk permissions again.
Quit Disk Utility.
Put the removed iTunes receipts back in /Library/Receipts.
Note: This issue does not affect Disk Utility's verify or repair disk features.
All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

i'm just scared i will do something wrong on my own and lose my data.
You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

My iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

my iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

Place the device in DFU mode and restore.

My track pad seems to have lost its strong "click" feel. Is this wear and tear or is there some way I can adjust it to feel the "click" more?

My track pad seems to have lost its strong "click" feel. Is this wear and tear or is there some way I can adjust it to feel the "click" more?

downgrading is not supported by Apple and doing so has the potential to brick your device. so, you can't. if you have feed back for the new iOS you can provide that here: http://www.apple.com/feedback/

Audigy SE lost its applications in Windows 7

,Audigy SE lost its applications in Windows 7vHello, folks. I upgraded my OS to Windows 7 Home Premium 64 bits and My Audigy SE lost its applications, such as Graphic Equalizer, Surround Mixer, Speaker Settings and etc. The OS does not recognize these functions when I try to open them. I installed all the drivers available for Windows 7 and I just have a very basic adjust and that?s it. The sound card is also crashing my OS. I had to uninstall it and remove the sound card. And I work with these features, so I had to go back to my old rig with XP.
Now I wonder? Windows advisor said that my Audigy was ok to run in Windows 7. What is happening and what can I do to have the equalizer and the whole thing working properly? Does this happen with all models? Creative doesn?t have a real Windows 7 compatible sound card? They just run with a basic setup fix?
I appreciate any response,?

I just forgot something!
The Audigy budget line (SE/LS/Value) do have the EAX Console! These card are the only Audigy card with the EAX Console, if my information is correct. Got my info from:
<a rel="nofollow" target="_blank" href="http://tweakers.net/productreview/27856/creative-audigy-se.html"]http://tweakers.net/productreview/27856/creative-audigy-se.html[/url]
It is Dutch.
In that review, the reviewer is saying that he likes the EAX Console with the Audigy SE card, and also mentions that he runs Windows 7 when making the review....So, it looks like these card do have the full EAX Console, if the screenshot is correct.
What may be the problem is that you downloaded the latest version of the driver. In the README of the latest, there is no reference to the EAX Console application, BUT the previous onse DOES!!
Just search for the following file on the Creative support site at:
<a rel="nofollow" target="_blank" href="http://support.creative.com/Downloads/searchdownloads.aspx"]http://support.creative.com/Downloads/searchdownloads.aspx[/url]
SB24_VTDRV_LB__04_0077.exe
Also, would you be so kind to let me know if this driver release DOES contain the Eax Console. I know someone that is desperately searching for it on his new Windows 7 machine.

MacBook Airport card has lost its IP address and won't connect to my network

The Airport card on my MacBook has lost its IP address and will not connect to my network. It worked fine until about two or three days ago. Network Diagnostics says that the Airport now has a self-assigned IP number and will not connect to the Internet. I can't find any info anywhere that tells me how to restore the IP number, and I don't get how it can have a self-assigned number and not connect. I have AT&T U-Verse, and my iMac desktop and two iPhone 4s connect with little difficulty. The MacBook is three years old, and AppleCare just expired two months ago. I'm still running 10.6.8 on both machines. I found an article saying that sometimes DHCP leases expire, but my desktop still works ifne, and I've had both connected to the same network since the same time. The artcicle said that more than one machine can share an IP address, so I wanted to try to enter the desktop IP address into the laptop, but I can't find a way to do so, either. Any thoughts?

Have you tried making a New Location for each yet? The Automatic one get confused easily.
Some "nix" to try when it happens also...
sudo ipconfig set en1 BOOTP;sudo ipconfig set en1 DHCP
sudo ifconfig en1 down;sudo ifconfig en1 up
Sometimes having an all OFF Location can help, thanks to Gnarlodious...
http://gnarlodious.com/Computer/MacOsx/WiFi

I am a cloud member and my cs6 encore lost its library of templates, how to i get them back

I am a cloud member and my cs6 encore lost its library of templates, how to i get them back

All Cloud versions of AI (both CC and CS6) are 64bit.

Nokia 6500c Problem!

my nokia 6500c doesn't seem to be getting any signal at all! i turn the phone on and i get signal for like 2 mins and then it just keep saying '' sim card registration failed '' or '' check info service '', does anyone know how to fix this
thanks in advance

Contact your network and request a new sim card.
If the problem persists with a new sim take your phone to a nokia care point as it may have a faulty sim reader.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

I purchased an Ipad mini in Thailand in first week of July. Now the screen of the ipad has lost its brightness and smells like somethings burning inside when switched on. I am in Dubai now and want to know if I can have it exchanged here in Dubai?

I purchased an Ipad mini in Thailand in first week of July. Now the screen of the ipad has lost its brightness and smells like somethings burning inside when switched on. I am in Dubai now and want to know if I can have it exchanged here in Dubai?

Contact support and ask them. http://www.apple.com/support/contact/

Nokia 6500c lost its wallpaper animation capabilit...

Similar Messages

Maybe you are looking for