Nokia 6500c problem caused by an update

He,
I was wandering if anybody here could help me with my problem. Let me tell you what happend:
I wanted to update my phone, a nokia 6500c, by downloading and installing some software. So I started PCSuite and downloaded some software. When it was done I started installing and I followed every procedure of the installer. About halfway the instalation the installer said there was a problem and 'the instalation failed'. I thought by myself, never mind, my phone works great without that software. So while the program was shutting down, I pulled my phone out of the USB Cable and noticed it wasn't on anymore. 'Strange...' I thought. Because I knew it was on like 2 minutes ago. I started with by pressing the 'on' button of the phone. Nothing happend...
Maybe the battery was empty? So I tried to put it in the recharger. And while I was watching to my phone I noticed that each half a minute the screen gave light. But I didn't went on. And now I still can't turn the phone on.
Anybody knows a solution?
Thanks,
McFlavus

take your phone to your nearest nokia care centre for them to look at. seems like that the installation of nokia pc suite or software update has stuffed up your phone. always remember to Safely Remove Hardware for your phone in windows, or trash can in Mac OS X, otherwise with improper removal you can corrupt your phone, which seems to be the case here.

Similar Messages

Nokia 6500c Problem!

my nokia 6500c doesn't seem to be getting any signal at all! i turn the phone on and i get signal for like 2 mins and then it just keep saying '' sim card registration failed '' or '' check info service '', does anyone know how to fix this
thanks in advance

Contact your network and request a new sim card.
If the problem persists with a new sim take your phone to a nokia care point as it may have a faulty sim reader.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Problems caused me to update, now Dead + Oversea's Service

For a few days I was experiencing issues with my Gen2 Touch. Pod-casts play back was skipping around, movies would green screen after a few minutes while the sound played on, and a couple times after syncing the library would show empty. First thing I tried was Restore, then Updated and Restored, then Updated iTunes. All this and still same issues. I then figured one more time to Restore and while in the middle the screen turned black and it's been dead ever sense. I've tried every method in the book to get this to wake up but nothing. Just came back from Apple service here in Korea, they couldn't get it working either. Then proceeded to tell me I have give this one up and pay them equivalent to $180 for replacement which I could pick up in a week. They wouldn't even give me the new one in the case. I showed them I can buy a referb from US for $150, they didn't care. Any suggestions?

This happened to me a couple of weeks ago when upgrading. Luckily I had back up everything and was able to retrieve most of everything. Be sure to backup BEFORE upgrading.

Problems caused by new update

Help please. I updated, and an error occured and wiped my touch of music and 1.1.3 apps. i did a restore but it diddent restore the apps. Its syncing now. But how do i get my apps back?
What do i do?

Is it set to auto-sync?
Try that and resync.
Look here for your files:
The iPod touch January Software Upgrade can only be synced to iPod touch from the primary iTunes library. If the user is manually managing music and video on iPod, this is the computer where they first set up the iPod or first set it up after restoring the iPod. The "iPod touch App Pack 4A93.ipa" file can be copied from the computer where you purchased it to your primary iTunes library computer, and sync the iPod from there.
The file is located here:
Windows XP
C:\Documents and Settings\[user name]\Application Data\Apple Computer\iTunes\Mobile Applications\
Windows Vista:
C:\Users\[user name]\AppData\Roaming\\Apple Computer\iTunes\Mobile Applications\
Note: These locations are hidden by default in Windows. You can these locations by choosing "Show hidden files and folder" in the View tab of the Folder Options Control Panel.
Once you have copied the "iPod touch App Pack 4A93.ipa" file to the computer with your home library, make a new folder named Mobile Applications in the correct location, and place the "iPod touch App Pack 4A93.ipa" file there. Open iTunes and sync your iPod touch.

Problems with software the update with Nokia 6233

Problems with software the update with Nokia 6233
Hello,
I have so far some-paints tries my software to update.
Each time the update procedure begins, sometime stands then on the telephone “test mode”.
On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
If I change my profile attitudes since that for example, then after a telephone restart again deleted.
What there can I make?
GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
You need to take it to a nokia care point for repair under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Problem I can not Update new Nokia X6 8Gb firmware...

Problem I can not Update new Nokia X6 firmware Version V.21.0.005,
can someone tell me where can I get new Nokia Software Update for X6 8Gb,
I tried to update new firmware, but this is new version is not Aviable
where I can get new version in my phone serial number: numbers end
in ( 2587 ) and when will update available for my phone serial number be
Thank you

Reasons why a phone cannot update:
1. It is a country variant - country variants often get the updates later, or have updates skipped altogether. A Turkish country variant product code for example, skipped v40 and updated from v31 straight to v50.
2. It is network branded - phones acquired from network providers or these providers' stores SIM free are branded, and will not get updates until the networks approve and modify the updates to their liking.
3. Special editions - These special editions are chartered editions and may never get updates unless taken to a Nokia Care center.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

N80 problems after last FW update

I have the following phone:
Type:RM-92 (N80-1)
Code:0527480
FW version:V 4.0707.0.7 (28-03-2007)
After upgrading to this firmware, I was faced with two rather irritating problems.
1) I've made a backup of the phone. After upgrading the FW, I restored the backup. Now, when I power up the phone, it says "Installing" after it boots up. Then, after a couple of seconds it says "Untrusted software found on memory card, install manually blah-blah". I installed all but one of these "untrusted" files, but I cannot remove from the list one which I no longer need. Application manager is set to allow all aplications and never check certificates online. Question is how to remove this sis file which I no longer need and which is, probably, causing this to happen.
And a mental note to Nokia, if they ever bother to read this - don't try to make the phone smarter than it should be - if I say I want to allow installation of all software, do not bother me with "untrusted" stuff.
2) a bigger problem is that service commands do not work. Tried entering them on the standby screen and from messaging/options, same thing happens. The phone says it's "requesting" the wanted data, but no reply from my service operator appears on the screen. It's not a probem with the operator, as other phones work correctly

28-May-200710:23 PM
genesys wrote:
I have the following phone:
Type:RM-92 (N80-1)
Code:0527480
FW version:V 4.0707.0.7 (28-03-2007)
After upgrading to this firmware, I was faced with two rather irritating problems.
1) I've made a backup of the phone. After upgrading the FW, I restored the backup. Now, when I power up the phone, it says "Installing" after it boots up. Then, after a couple of seconds it says "Untrusted software found on memory card, install manually blah-blah". I installed all but one of these "untrusted" files, but I cannot remove from the list one which I no longer need. Application manager is set to allow all aplications and never check certificates online. Question is how to remove this sis file which I no longer need and which is, probably, causing this to happen.
And a mental note to Nokia, if they ever bother to read this - don't try to make the phone smarter than it should be - if I say I want to allow installation of all software, do not bother me with "untrusted" stuff.
2) a bigger problem is that service commands do not work. Tried entering them on the standby screen and from messaging/options, same thing happens. The phone says it's "requesting" the wanted data, but no reply from my service operator appears on the screen. It's not a probem with the operator, as other phones work correctly
28-May-200710:23 PM
genesys wrote:
I have the following phone:
Type:RM-92 (N80-1)
Code:0527480
FW version:V 4.0707.0.7 (28-03-2007)
After upgrading to this firmware, I was faced with two rather irritating problems.
1) I've made a backup of the phone. After upgrading the FW, I restored the backup. Now, when I power up the phone, it says "Installing" after it boots up. Then, after a couple of seconds it says "Untrusted software found on memory card, install manually blah-blah". I installed all but one of these "untrusted" files, but I cannot remove from the list one which I no longer need. Application manager is set to allow all aplications and never check certificates online. Question is how to remove this sis file which I no longer need and which is, probably, causing this to happen.
And a mental note to Nokia, if they ever bother to read this - don't try to make the phone smarter than it should be - if I say I want to allow installation of all software, do not bother me with "untrusted" stuff.
2) a bigger problem is that service commands do not work. Tried entering them on the standby screen and from messaging/options, same thing happens. The phone says it's "requesting" the wanted data, but no reply from my service operator appears on the screen. It's not a probem with the operator, as other phones work correctly
I have problem too, after last update my N80 my national language (czech) was delete, and next problem with untrusted software I have too

Nokia 6300 Disapperance of languages after update ...

Hello,
Yesterday, I updated my nokia 6300 from version 05.00 to 05.50 but all the languages disapeared after except English, Melayu and two far eastern languages. I need to use French and Arabic on my phone. So, please can anyone tell me how to correct this or to revert to the previous version.
Regards,
Ahmed

The same problem diffrent country.i update from ver5.50 to 6.01 and i lost the greek language but the updater wrote that this update is compatible with my phone.good luck cause nokia is sleeping.no one from nokia giving answers,they let us discussing the problems and giving solutions by our own!!!!GREAT STRATEGY OR TRAGEDY?
COSTAS GREECE
Moderator note: offensive language removed, please do not try to circumvent the language filters.
Message Edited by michaels on 30-Apr-2008 08:25 PM

Photoshop CC 2014, A problem caused the program to stop working

When opening Photoshop CC 2014, I get "A problem caused the program to stop working correctly". Works fine on my home computer but the new one in the office has the error message. I have the latest cloud version of the program. I've updated the AMD/ATI display driver- first from the HP site supporting the Win 7 Pro laptop I'm working on(driver ver.13.2) and then from the AMD site (ver.14.1) I've installed all windows updates. Still get the same message followed by Photoshop closing itself out.
Has windows ever notified anyone of a solution

I think once Windows notified me of a solution (which was to update my video card driver). Most of the time you don't get a direct response, but submitting the report does give the engineers something to work with in order to try to find out what is causing the problem.
Anyway, there are about a million different things that can cause any application to return this generic error message. While you've already covered a couple of the possible solutions, there is still a ton of stuff to try. Since Photoshop is working on one computer but not the other, and knowing that Photoshop is exactly the same between both computers (assuming you are using the same version), then the question really becomes "what is different between the two computers?" Basically, shy of knowing that, we have a ton of general troubleshooting steps to give a shot at:
Troubleshoot system errors, freezes | Windows | Adobe software

"iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."

Whenever I connect to the iTunes store i receive an error message "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This causes iTunes to close. I am using iTunes version 10.5.0.142 on a Windows Vista (64) PC. I have reinstalled iTunes selecting the "repair" option and also uninstalled and reinstalled iTunes. Any help will be deeply appreciated. Thank you. Below is the result of the diagnositc.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
HP-Pavilion BN474AV-ABA HPE-150t
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 002FAD94098CD0E0
Current user is not an administrator.
The current local date and time is 2011-11-13 22:08:54.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 220
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2cb3fff3fa771d265b0f8ffdcca13b55
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {F4A2029C-16AA-4BDF-8DB7-9EC2A75B5991}
Description: Realtek PCIe GBE Family Controller
IP Address: 192.168.1.6
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun Nov 13 21:09:29 2011
Lease Expires: Mon Nov 14 21:09:29 2011
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-13 22:02:08.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: hp DVD A DH16ABLH, Rev 3HD9
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 15:40 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: hp CDDVDW TS-H653R on CDR media at speed 24X.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
Bruce's iTouch, iPod touch (2nd generation) running firmware version 4.2.1
Serial Number: 1C9053CC201
**** Device Sync Tests ****
Sync tests completed successfully.

Same exact thing with me. And no help from apple. Just dropped nearly $600 and cannot get a decent working setup.
Apple's only suggestion was to uninstall iTunes and Quicktime, and re-install... of course (the I.T. Crowd tactic).
The crash happens only on iTunes store access.

Problems with Gband after updating to iTUnes 7 and Quicktime

Garageband has bee acting strange ever since the update and sometimes tracks freeze and it goes into a repeat which won't stop until I use the power button to shut down the computer. I am having multiple application problems since the forced update to iTunes 7. Anyone else having issues?

many times in the past, a quicktime and/or iTunes update has caused some weird stuff. Did you repair permissions after the update? Sometimes that will clear it up. Other times, many folks have gone back to the previous versions until a fix was found.

Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly.

I recently purchased a new desktop computer and installed Adobe CS3 Master Edition on it and I get the following error:
Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Out of the entire suite of tools only Photoshop will not launch. The weird thing is i also had the same Adobe programs installed on my laptop and I have not made any installation updates to that machine and i am getting the same error. I have always installed the same software on my two home machines with no problem until now. Any help is appreciated.
Thanks,
Andy

You'll probably going to have to uninstall, then re-install the application; but you need to provide a lot more information;
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I got an error message: 'iTunes has stopped working. A problem caused the program to stop working correctly. The solution asked me to load latest version which I did many times and still not working... HELP!

[Window Title]
Microsoft Windows
[Main Instruction]
iTunes has stopped working
[Content]
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
This is what I got... sorry, not very tech savvy to copy the error message onto here...
Have tried uninstalled and re-installed iTune, updated the new version of 10.6... many times over still not working!!!
I share the frustrations of many here. HELP!!!!!

Hi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

Is your problem caused by your PSU?

Welcome to the forum! If you are having a problem, this is probably the best place to come to! But BEFORE you post with your troubles, make sure first you have read the Forum Rules, and the Suggestions to Posting And Getting Better Answers stickies.
Now, the most common problems we see here in the Forums are those relating to your Power Supply Unit (PSU). That metal box with wires coming out of it is far more important than you think. Especially when it comes to upgrading a PC.
You may have had a case which came with a PSU that was fairly cheap, and the board and CPU you had previously may have run with no problems at all. But then the time comes when you want to upgrade that mobo and CPU, and thats when the problems start....
"Hi, I just upgraded to a K7N2 Delta 2 board, but when I power on the system, I cannot run the CPU at its correct FSB!"
"I just put together a system based around KM4M-V board with Athlon XP3000, but the fans spin for a second and then stop..."
"I've replaced my old Geforce 4 MX440 with a Geforce 7600GS, but there are dots and lines all over the screen"
"i installed Windows fine on this KT6 Delta board, but when I try to run any 3D games the system just completely locks up..."
A lot of people at this point have already decided that its MSI's fault, and that they make "rubbish" motherboards. But they have failed to consider the one piece of hardware that often gets overlooked...
The Power Supply Unit. The often overlooked PC hardware
"So what do I need?"
Most modern mobos utilise two power connectors, the standard 20pin ATX connector that all boards need, and an auxiliary 4pin connector known sometimes as JPWR1 or ATX2. This connector provides a seperate 12v supply for the CPU, as most modern CPUs draw heavily on this power line.
If your power supply doesn't have this 4pin connector, then you may as well throw it away now and get a new one.
Secondly, you need to assess the specs of your PSU. There is another sticky here which warns of Q-Tec PSUs not correctly advertising their specs, which goes into more technical detail, but basically there is more to a PSU than the output given in watts, eg 300w, 420w, 550w. A good quality 380w PSU can be much better than a poor 550w one, that is why we ask you for the make of your PSU.
PSUs supply power to your system through several "rails", the most important being the 12v, 5v and 3.3v ones. The current supplied through these rails is measured in amperes (amps), and is usually listed on the sticky label on the side of the PSU, similar to the pictures shown below:
Two very different PSUs. The one on left has poor 12v rail and will cause problems. The one on right is much better![/i]
If your board has this 4pin connector, then you need a modern PSU which has an emphasis on the 12v rail, as this supplies most of the power to your CPU, graphics card, hard drive(s) and CD/DVD drives. For a basic SocketA board, such as KM4M-V, 15a should be sufficient, whereas a performance board such as KT880 or K7N2 Delta2 will need 18a or more. AMD64 boards have greater requirements, especially if you are running a dual-core CPU with two graphics cards in SLI; refer to their forums for specific advice.
If your board doesn't have a 4pin connector, such as KT3 or KT4 series, then your PSU should be a slightly older type, where the power balance favours the 3.3v and 5v rails. 12v rail on these boards is used to power motors in drives and fans, etc. As 3.3v and 5v are essentially drawn from the same source in ATX PSUs, you will never get the total output you see listed on the label together, which is why you must also consider the "Max Combined Output" of the 3.3v & 5v rails
"But it worked fine on my old system!"
Older PSUs were designed for older mobos, which mainly drew on the 5v and 3.3v rails to power the CPU and other onboard devices, leaving the 12v rail to power drive motors in HDDs, CD drives and floppy drives. As newer CPUs become more power hungry, the mobos become more reliant on a 12v supply to "feed" the CPU, so older PSUs cannot cope with extra demands.
So technically yes, your PSU may have been well able to cope with your previous hardware configuration, but now you have upgraded, it could simply be that your PSU is not able to supply correct power demands of your new mobo...
"So is my PSU any good?
Unfortunately, there doesn't seem to be any hard set guide to what amps to look for in a PSU to power a certain mobo/CPU combination. You can browse through the forum, and there are many suggestions what to look for.
If you want to ask for help, then please avoid people asking the same questions again, and tell us the specs of your PSU: list the brand, the output in watts, and the amp ratings on the 12v, 5v and 3.3v rails. Saying you have a 420w PSU is irrelevant, as there are better quality 360w PSUs, than some cheaper 550w models. We want to see: "My PSU is a Codegen 350w (3.3v/20a, 5v/30a, 12v/12a)", not "My PSU is 500w". If you provide this information, you will get better and faster advice. Just supplying a make and model name and expecting users to search the internet to find your PSU specs is just a wee bit rude, as they are already giving up their time to help you!
How can I test if my PSU is causing the problem?
Try another better PSU. See if you can borrow one off a friend. Maybe you have another computer at home? Either way, there is no point trying a PSU that is the same or weaker than the one you already have.
Also just because a PSU works on another computer, doesn't automatically mean it will be powerful enough for yours. Don't forget, a PSU that works on a PIII system probably won't work on a new Athlon XP system.
If you do decide you want to buy a new power supply, then do all your homework first. Compare prices and specs, and look for reviews. But don't trust all reviews! Not everyone tests PSUs properly, some will rate PSUs if they have a shiny gold finish and a fancy LED, without even glancing at the performance.
When shopping for PSUs, either online or in a store, are the specs available? if not, then visit the manufacturer's website. You could spend $/£100 on a flashy PSU with six fans and rainbow LED lights () but it could be worse than yours. A good quality PSU could last you for years, and maybe another couple of upgrades. Don't spend more than you can afford, but don't skimp on the specs at all costs.
If you plan on doing more upgrades, it would pay to invest in a very good high quality PSU, that way you know it will last through your next upgrades. Buying a PSU now that just meets your requirements may cause problems if you upgrade a lot of hardware later, then your new PSU is once again not powerful enough.
"OK, so my PSU is rubbish, what do you recommend?"
I recommend you read through the following threads:
What's the big deal about PSUs?
Choosing the right power supply
Q-Tec warning!!!!
A Power Supply Guide
Power Supply Calculation
2x 12v: The Dual Rail Myth
Power Supply Requirements and Selection for K8N mobos
Power Supply Calculator for MSI K8N mobos
also browse through some threads, you will see many problems caused by poor PSUs, and many suggestions on what to get!
the following article appeared in Custom PC magazine in November 2004 and is very good reading, plus you can see results of the 12 PSU's they tested:
Custom PC - "I've got the power" - Nov 2004
Custom PC PSU labs test
UPDATE:
CustomPC's 2005 Labs Test, 29 PSUs tested:
http://www.pcpro.co.uk/custompc/labs/26/psus/products.html
(please note a free registration is required after you view a few pages)
Good luck!

Are you using a dynamic image in your report? Like an image that comes from a CLOB or BLOB in your database? If so, are you sure it is base64 encoded?
I'm having a very similar problem. I get the error when using an image bigger than 6KB (8KB after base64 encoding). It seems APEX cuts the end off of values too big for it's liking (total generated XML for the row should not exceed 32K I suppose).
The errormessages I get when using a non base64 encoded clob or an image that's bigger than 6KB are the same as yours.

I'm getting the following error message when ever I try to start cs6 and the program gets close. "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly."

Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.

Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium

Nokia 6500c problem caused by an update

Similar Messages

Maybe you are looking for