Nokia 6600 fold - no USB connection with PC Suite

Hi,
I've got a new 6600 fold phone. I've insatlled Nokia PC Suite 7.1 and connected the phone with the USB cable. The PC recognized it and installed it just fine. And yet, the PC suite doesn't "see" the phone - I can't choose any of the options to connect on the menu.
Tried to reinstall, read every possible guide, restarted both PC and cell phone several times. Nothing works.
Any ideas what else I can do?
(I don't have a bluetooth connection on the PC)
Thanks.

Hi,
I was having the same problem with my 6600 slide, when trying to use the software updater. I noticed that the phone was connected on port COM11, i simply changed this to the lowest COM port available (in my case COM1) and the software updater picked it up.
To change COM port right click
My Computer and select Properties
Select Device Manager
Expand Ports (COM & LPT)
Right click your Nokia phone USB and select Properties
Select Port Settings
Click Advanced button
Choose a new COM port from the drop down list
Click OK when done

Similar Messages

Nokia 6600 Fold SIM Contacts List

I've just purchased a Nokia 6600 fold and I'm trying to configure the settings of my contacts list. My contacts are currently listed as per the example below:
Citizen;John/5
However, I want them to display like this:
John Citizen
I have been into the settings and chosen to display First Name First, but my contacts are still not displaying as I want them to. What am I not doing, and can I fix this problem?
BTW, what does the number represent?

As a new member, Hi All
I hate to open an old can of worms but reading the history of the endless problems people have had with the 6600 fold, I wondered if there has ever been a happy outcome.
I realise the 6600 fold is now an old phone, but I have been using Nokia since the original 101 and like their products, this one really suits my needs.
However I have the intermittent crash that I read about so much on this forum. The double tap cover display fails, the electro magnetic fold realise fails and the numeric keys fail, plus various other features die. I have done all the usual home remedies using the Nokia suite like reinstalling software etc, checked battery voltage and so on to no avail. The only answer is to power off and on again or sometimes remove the battery.
I have taken it to two different Nokia care centres (LOL) nether were able to identify the fault (one down in Cornwall charged me £25 to tell me they could not find the problem).
Can anybody put me out of my misery please, as you can see I really like this phone and want to keep it going
Thank you
Dave
Grasshopper

Need help - nokia 6600 fold

Hi, have had nokia 6600 fold for couple of years - love it ! no probs, but have just found a strange symbol on screen which ive never seen before ? Its a yellow message envelope which spins and then becomes what loooks like a paper clip ? Cannot figure out what it is..messages 'in' shows nothing ?
Any ideas ? Thanks.

go to messages then options and settings go to multimedia look at what multimedia retrieval is set at set automatic if not done so already
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Proxy client (over USB connection) with DHCP assigned IP address doesn't work with FRDM-K64F

Hello,
after reading about the issues on this forum with a static IP address on the Freescale FRDM-K64F board I went for an DHCP address but I can't get the proxy client to work over a USB connection with DHCP either.
My console tells me the following:
RTC Time: Wed 2014-01-01 00:07:27
Network initialized
IP Address:      10.143.xxx.yyy (xxx and yyy is real numbers, just changing them for the forum to letters)
Subnet mask:     255.255.252.0
Gateway:         10.143.xxx.yyy
MAC-address:     00:0c:00:06:70:00
And when I try o to connect with the following command :
java -jar proxy.jar -socket 10.143.xxx.yyy
I get the following output and no CLI interface:
Trying to open socket connection with device: 10.143.xxx.yyy:2201
Connected to the socket: Socket[addr=/10.143.xxx.yyy,port=2201,localport=49605]
Open channel 8 with hash 0x130399b3
Channel 8 CLOSED -> OPENED
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 OPENED -> AVAILABLE
Open channel 9 with hash 0x0
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
I don't know if this matter but my java version is:
java version "1.8.0_31"
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
Any ideas or am I missing something completely?
Thanks
Andy

Hi, Andy. Please excuse my ignorance, I am very new at this ME embedded stuff. I had my challenges, but was finally able to get my board up with a static address. I went through a lot of headaches, but finally got the board flashed with the latest bin. I then updated the jwc_properties.ini file on the SD card to include:
# Whether static configuration or DHCP server is used do get IP address. Possible values: dhcp,static
ip.method = static
# IP address,used with static IP configuration only
ip.addr = 192.168.0.30
# Network mask,used with static IP configuration only
ip.netmask = 255.255.255.0
# Network gateway,used with static IP configuration only
ip.gateway = 192.168.0.1
# DNS server,used with static IP configuration only
ip.dns = 208.67.222.222
# MAC address
mac.addr = 01:02:03:04:05:06
I was then put the card into the board, disconnected both USB cables, and then powered it up. From that point I was able to ping the board. I can now use Device Manager in NetBeans to connect to the device.
I am struggling quite a bit with many issues. It seems that when I try to stop the app from NetBeans, the "please wait" dialog hangs forever. I have to use Windows Task Manager to kill the "JavaW" process tree and reconnect the board.
I have also had trouble understanding the GPIO pin assignments. Another gotcha was trying to use the AutoStart feature. Since the sample app never cleanly exited, I thought that I bricked the board. The secret is to power it down, remove the SD card, and then delete all files EXCEPT the jwc_properties.ini file, put the SD card back in, then power up. It seems that the board forgets that the MIDlet was installed.
Hope this helps others out there.
Please everybody, post your experiences here. There seem to be very few of us, and finding pearls in the dust is rare right now.
Regards,
Pete

Nokia 6600 Fold: Music Distortion after FiRmware U...

Nokia 6600 Fold
After updating from Firmware 4.80 to 5.23 my Mysic Player distort all music - can I downgrade to 4.80?
Poul Erik

if you go into a NOKIA Care Point they might be able to downgrade your firmware if you tell them the problems.
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions!

UPS, USB-connectable with: UPSmart2000i. Is there software, compatible with Mac OS X 10.8..?!

I bought a 2000 VA interactive UPX ( Turbo-X brand, "PLAISIO" stores' proprietary, Greece), USB-connectable with software for Windows provided: upsmart2000i.
Is there other software available for it, compatible with Mac OS X 10.8..?!
I attempted to install the APCAGENT.app along with the "Growl": after installation, the APCAGENT.app was not able to find the IP address of the ULS or to establish any communication with it; it didn't even detec the presence of the already running GROWL app.

TYPOS CORRECTED:
...a 2000 VA interactive UPS ("Turbo-X" brand.....
...the APCAGENT.app wan not able to find the IP address of the UPS or ti establish....
....didn't even detect the presence...
Generic UPS software Mac-compatible needed
Apologies for typos and any inconvenience

E71x not vibrate after connected with PC Suite

Anyone has the same problem? My E71x purchased 2 days ago does not vibrate while and after connected with PC Suite. I had to turn off and turn it back on to activate the vibrating thing.
Thanks

mmm... ill describe the whole situation:
phone has 2 days old
I connected it to the PC
Running PC SUITE
All was functioning normal, i had about half charge
i got a phone call from my gf, when i picked up the call, i disconnected the phone
the line dropped dead. so did the phone
i tried to restart it to no avail
i plugged it to the pc, didnt work
i removed the batter, didnt work
so i connected it to the power cord, and the lights turned on
i disconnected then tried to boot it up, and didnt work
i reconnected the power cord and started it while on external power, and it did start, showing just 1 little bar of battery.
I left it there for about 1hr and removed it, and charge was FULL
i reconnected to PC and im monitoring it and it hasn't discharged
so its weird... <.<
my guess is that unlike HTC or Sony Ericsson phones, the data cable and hte power cable CAN be connected at the SAME TIME. that would be the only explanaition on why it doenst charge up on the USB (but ohter theory of mine is that if i connect it to the PC on file trnasfer mode, it might charge it)

Connection with PC Suite stopped working

Hi there,
Up until last week, PC Suite and my phone use to work perfectly. For some reason, i can no longer connect my phone (nokia e61i) and laptop anymore.
I have uninstall / re-installed PC suite without success
When I try ti pair my phone again, i go into the connection window, seach for a bluetooth connection, then in step 3 of 4 PC Suite show's a list of phone that i use to be connected to (before i had the problem). i cannot go any further in the connection setup process. I then tried to unpair my phone, and I get an error message 'cannot unpair phone'.
I really don't know what the problem is, but this is causing major problems for me as I use my phone calendar everyday and I can no loger sync with my laptop. Appreciate any assistance. Below are my specs:
PC Connectivity Solution:
Version 8.47.6.0
[Nokia Connectivity Cable Driver:]
Version 7.1.8.0
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 2
Language: English
Language for non-Unicode programs: English
Detected Internet browsers:
- Microsoft Internet Explorer 7.0 (Default browser)
Detected Bluetooth stacks:
- Microsoft (Version: 5.1.2600, Build: 2180)
- Broadcomm (Version: 5.1.0, Build: 4800)
Thanks
Alex

I have probably the same problem it was working fine, but some time in January 2009 it the connection with PC Suite ceased working. I have produced this error over cable as well as IR.
Version of Windows: Microsoft Windows XP Professional Version 2002, Service Pack 2
Version of PC Suite: 7 1 18 0 eng web
Connection method: cable, and IR?
Phone: E61i
1. I connect the phone.
2. PC Suite says "Click here to connect a phone"
3. I click and the connection wizard opens
4. I select "Infrared"
5. PC Suite immediately opens new window that says "You have now the following connections available:
Nokia E61i IrDA"
6. I click the green button and return to PC Suite that still says "Click here to connect a phone"
7. If I click on synchronisation, the synch button is not enabled: I cannot synchronise or use any other application in PC Suite. But if I right click the IR symbol on windows and select "transfer files" then I can send a file to the phone.
Would really appreciate help on this.
Thanks

USB connection with Nokia N70

While my imac can see the N70 via the USB connection, isync doesn't see the phone. I want to transfer photos/video from the phone to the imac and imagine the usb to be way faster than bluetooth. Can anyone hopefully point out an obvious solution to the dilemma??

I'm not familiar with the N70 but I have a N3230.
I simply remove the MMC card from the phone and plug it into my USB card reader. It then mounts itself as a drive on the desktop and I can manipulate its content.

Problems with USB connection and PC Suite

Connecting your device to the PC via USB doesn´t always work as smooth as it should. You can either use the setup´s repair function or if you are experiencing more serious problems, you need to uninstall all Nokia software form your phone and get it back on to make to work again.
This is how you do it:
Run the Nokia PC Suite setup file again and choose "repair" instead of "uninstall". This should solve some of the connectivity problems. If it didn´t work for you continue with the instructions below.
Go to Start --> Settings --> Control Panel --> Software, there you need to uninstall all Nokia software (Nokia PC Suite, Nokia Cable driver, PC Connectivity Solution ...)
Download and run Nokia PC Suite Cleaner
Reboot your computer
Download and install PC Suite here.
Connect your phone via USB cable (if possible use a different USB jack) and follow the instructions on the screen.
Now you´re set up to manage your phone with PC Suite!
For further questions ask within the board, for improvements on this article contact me.
Thanks to users scoobyman, cricfancy and shuntfield for their collaboration.
Message Edited by illinjah on 16-Aug-2009 07:02 PM
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Hi pudu
thanks for the reply!
so sad, that doesn't work for me. the same with Nokia_PC_Suite_6_84_10_3_eng_us_web.exe
I have widcomm stack for bluetooth, there are lot of concerns about this,
but I do not understand why it cannot be connected via USB, too. Oh, no, it is connected, but that makes no sense

USB connection with PC is not working after updating firefox OS 1.3 to 2.0 on my device. How to fix this?

After updating OS 1.3 to 2.0 usb connection to PC is not working. I am using firefox os device Flame. I cannot share files with my PC. Please help me to fix this problem.

''Ralph Daub [[#answer-694088|said]]''
<blockquote>
Hi Raiyad Raad,
I'm sorry to hear that you're having issues when connecting your Firefox OS device to the PC, after updating it from v1.3 to v2.0.
Please ensure that USB Storage and Media Storage are activated.
If you are still having issues after activating USB storage and restarting your device, please write back to us with the following information:
* What is the model of your phone?
* What is the OS version and Build ID found in the Device Information page? Please visit [https://support.mozilla.org/en-US/kb/how-do-i-find-what-version-firefox-os-i-have this link] if you need help finding the Build ID of your phone.
* Please describe the steps you took to update your device.
* Please provide the exact steps to reproduce the issue you are encountering.
* How often do you encounter this issue?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we have all the necessary information to investigate this behavior.
- Ralph
</blockquote>
I've activated the USB storage and media on the phone. But still it's not working. I'm using T2mobile Flame and my OS version is 2.0. Build ID: 20141016183911
I've written a blog about how I updated it here: http://raiyadraad.blogspot.com/2015/02/how-to-update-firefox-os-13-to-20-with.html
I'm having this problem after updating to firefox OS 2.0

Nokia 3500 classic and its connectivity with Linux...

Hi All,
Can you tell me if nokia 3500 classic can be connected to a linux PC or not?
I am in a hurry.
Thank you.

Me too I'm having almost the same problem.I'm from Mauritius.
My configurations:
Windows XP Professional SP3
Phone Model:Nokia 3500 classic
Cable usedKE-2
Nokia PC Suite 7.1.18.0
I've got a Nokia 3500 Classic & tried to connect it to my PC,which has Nokia PC Suite 7.1.18.0 installed.
When I connect it to my PC,the PC displays the message "Nokia 3500c connected via USB".
The grey icon becomes blue/green.
When I click on "Backup",Nokia Content Copier loads.When I click on "Back up the desired phone contents to a backup file which is saved on the PC", I get the message "Failed to open connection to the selected phone.Reconnect your phone and try again."
When I open Nokia PC Sync, it displays "Not connected".
When I start Contacts, it says "Refreshing of contacts failed."
When I open Nokia Communication Centre-Calendar,it displays "The Calendar View could not read the entries from your device".
When I open Nokia Music Manager,somewhere it's written "Nokia 3500c(Not supported)".
When I go on Nokia Image Store,it displays "No supported phones connected".
How come that my mobile appears to be connected to my PC,but applications inside PC Suite do not detect my mobile?

Hp 6535b drops usb connection with kvm.

I have a hp 6535b and have a kvm attached to it. It drops usb connection on a regular basis and it is very annoying. I am not sure what i shoud do about it so any help will be appreciated.

Hi!, Ranothil: If you have the next cable and "null modem" (http://commerce.hpcalc.org/serialcable.php), you can transfer, anydata, from HP50G, to PC and viceversa, across Connectivity Kit (Conn4x), without problem. Please, see this link, with instruction's, for transfer data with serial cable, null modem and connectivity kit ... http://sense.net/~egan/skb/ and/or ... http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv017.cgi?read=125259 Note: Better, if you transfer data, from HP50G to, PC and viceversa, across the microUSB.

Problem while using Internet USB Connection with Macbook Pro

Hi...
My name is udayan and i am from India, I am using MACBOOK PRO from last 1 year. For most of this period i have used wi-fi connection for my laptop. But recently i have purchased a Relience Net connect Device for Internet facility. As soon as i started using this device, i have started facing an unusual problem. Whenever i start using it, after 5-10 mins. a fade screen appears and asks me to RESTART the laptop. This keeps on happening after every 10-15 mins which is pretty annoying. I have tried to use the same Internet device on normal laptops and it works just fine with that machine.
Can you please help me to understand this phenomena? Is it a MAC limitation or something else?
Hope to hear it from you soon.....
Cheers!!!

I tried to connect with Ethernet the MACBOOK Pro to the modem but the situation hasn't changed
Are you saying you cannot connect to the internet wirelessly and through the ethernet? If so, there is something else going on.
See KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
============================
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
=============
Mac OS X (10.4.6)
Use Software Update to update your OS to last version of Tiger which is OS 10.4.11. Install all the other updates that goes along w/it.

Nokia N95 doesn't connect with PC Suite

I've tried using my mac and my pc now. It doesn't connect with anything. The computers recognize the phone, but the software doesn't. Any idea whats going on?
Thanks.

Since there is no PC Suite for Mac, is difficult to help.List more details about your system and Suite versions, then its easier to help

Nokia 6600 fold - no USB connection with PC Suite

Similar Messages

Maybe you are looking for