Nokia 6600 only works from one cell tower
I have this weird problem with my phone where it will only work off one cell tower. Once I leave the coverage of that cell tower it will not work anywhere else.
It started a few months ago and i'm not to sure why?
The funny thing is it's the cell tower on top of my building at work, so when i'm at work it will work (calls/txt/etc) but as soon as I go home or even go to another city it will not.
Any ideas?
The first thing I'd recommend you do is to reset your phone, but I can't tell from the 6600's webpage what OS you're running so I can't give you instructions on how to do this.
Have a look through your menus to see if you can find an option to reset to factory defaults, but please remember that doing so will wipe ALL data from your phone.
If you wish to backup your data you can do so using the PC Suite application which you can find here :
http://www.nokia.com/pcsuite
Hope this helps.
Regards,
Edward
Similar Messages
-
Printing only works from one computer
I have an Epson Stylus C60 connected to the USB port on my Airport Extreme. There are two computers on the network, a PowerBook G4 and a MacBook Pro. Both computers connect to the network very reliably and have internet access. The problem is that the MBP cannot print to the connected printer. The G4 has always printed fine.
The MBP sees the printer as a Bonjour printer, and I can add it to the printer list without problem. When I try to print, I get a message in the print queue that there is a communications error with the printer.
In the airport configuration window, the printer is recognized and remote printing is enabled. Any idea why printing only works from the G4?Thanks for your help. Yes, the driver is a universal binary and the printer works great when plugged directly into the computer. I just can't figure out why it won't work over the airport.
Any other ideas? -
Sound only works from one port
My sound only works when I use the output port on the back of my computer, but I'd also like to use the one at the front of my computer for convenience. What setting am I supposed to change to do this? Here is some information about my system.
~ > cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.24.
~ > aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: VT1705 Analog [VT1705 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: VT1705 HP [VT1705 HP]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
My guess is that I want to use device 2 of card 0, so I tried creating a ~/.asound.rc containing
defaults.pcm.device 2
but this didn't seem to do anything.The "Front" channel isn't the same thing as the front panel. From the ALSA wiki:
"Front, Surround, Center, LFE (subwoofer) and Side (these are the names of the channels with Intel HD Audio, they may vary with different hardware)."
How many sounds cards do you have?
[dspider@arch ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0
[dspider@arch ~]$
What are the other HDMI devices? The video card?
And have you tried googling the problem?
http://ubuntuforums.org/showthread.php?t=1462288 -
DATAGRID FOCUS ISSUE: Focus got lost, while moving from one cell to another cell using tab key.
Problem: Focus got lost, while moving from one cell to another cell using tab key.
Example: In an AdvanceDataGrid, there are three columns having custom ItemRenderer with Spark TextInput control (editable=true & focusEnabled=true).
When I try to move the focus in with in 2nd, 3rd & 4th column using tab key, focus got lost. Most of the time it’s working, but some time it doesn’t work. There’s no clue as to how may rows/columns the focus has jumped to; or whether the focus has gone out of the data grid altogether.
Observations: I am not sure whether this problem is because of custom component implementation or it is because of some issue related to Flex Component.
It only occurs when we perform some actions like some server call, some complex logic execution etc. at the focus out event of itemrenderer.
There is one property of datagrid i.e. editedItemPosition which contains row & column index of datagrid. On the focus out event, it gets null when focus got lost. We tried to set it, but it didn’t work.
Steps Performed:-
1. Currently focus is in 2nd column i.e. Apply to #.
2. Once I press tab key from 2nd column, it goes to 3rd column which is correct.
3. Now if I press tab key from 2nd column i.e. Payment #, focus should go to 3rd column, but it goes out of data grid and set the focus of button which is outside data grid.http://search.java.sun.com/search/java/index.jsp?qp=&nh=10&qt=%2Bjtable+%2Btab+%2B%22enter+key%22&col=javaforums
-
Using IE7. I have three users on my computer. All
have Administrator level access. Flash only works for one of them.
When attempting to play a video on YouTube for example it says "You
either have JavaScrip turned off or an old version of Adobe Flash
Player."
JS is turned on and the current version of Flash Player is
installed.
So does anyone know what is going on here?
ThanksI was able to fix my problem of Flash only working on user
account. I did the following two steps to correct the problem:
1. First uninstall the Adobe Flash Player plug-in and ActiveX
control by following the instructions stated in
tn_14157.
2. Second Download SubInACL from Microsoft to fix permission
issues that prevent the Flash Player installation by following the
instructions stated in
fb1634cb.
Following the above two steps, fixed my problem of only
having Flash run on only one user account. Now it runs on all four
user accounts.
As a side note: The Flash Player plug-in and ActiveX control
would not run in user accounts with Limited access. But when I set
the permission of the user account to administrative, then Flash
would work.
Regards,
Bob -
Can only connect from one direction
I'm having trouble video confrencing... I tried searching the forums, but I'm having trouble thinking of clever search terms.
I can only connect from one direction with one person. They can invite me to a chat and it works fine every time. However when I invite them it always fails. I can invite other people and it works fine though.
This doesn't seem like a typical router problem, because they can invite me and we videochat just fine.
This has been a problem for most versions of iChat that I can remember, but I'm using 3.1.5 currently.Hi
Is the other person a PC user.
Tony -
Nokia 6620 only works as Modem
Hello !
When i try to use iSync with my cellphone Nokia 6620 only works as modem. Going to settings, modem is the only service available.
I have another phone that works like modem and can transfer contacts and events.
What can i do to make my 6620 working to sync contacts and events ?
Regards
CristianI cannot see any obvious issue with your device profile, though it may be that the Nokia SyncML Server profile must present, as it is in mine. I simply don't know: maybe Julian Wright or Alexander Traud could tell you it that is the case.
The other possibility is that your installation of iSync 2.4 is not complete, though I would seek to determine if your profile is identical to that of others on the same mobile handset, from another carrier provider, as they sometimes choose to defeat or otherwise interfere with the operation of specific Bluetooth profiles. US carrier Verizon Wireless is probably best know for engaging in this behavior. -
HT201320 My ear phones only work on one ear for my iPod touch
When I use my IPod do listen to music my ear phones only works on one ear
- You have verified that the problem is the iPod and not the headphones, right?
- Try inserting/removing the headphone plug a dozen times or so. Try cleaning out/blowing out the headphone jack.
Try the following to rule out a software problem
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Likely a bad headophone jack.
- Apple will exchange your iPod for a refurbished for this price. They do not fix your iPod.
Apple - Support - iPod - Repair pricing
A third-party place like the following will replace the jack for less. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
How can I transfer work from one computer to another?
How can I transfer work from one computer to another?
Welcome to the forum.
I can think of three basic ways to accomplish what you wish to do:
Use the Project Archiver to archive your Project (and check the box to gather the media files), to an external HDD. Probably the easiest way to do it.
Copy the Project and ALL media files to an external HDD, but be prepared to relink the media files to the Project, as the drive letter (part of the Absolute Path) will have changed.
Edit loosely, and Share to an AV file, which will be Imported into a New Project on that second computer. Or, edit VERY tightly, and do the same. I like the first, as removing, replacing Transitions, etc., can be much more difficult, unless that "tight edit" is 100% done.
Good luck,
Hunt
Message was edited by: Bill Hunt to correct formatting -
I cannot use the password to update apps on my second IPhone. It only works on one of the phones. They both have the same Apple ID and password.
If it really does not work, change your password here https://appleid.apple.com (Manage account) and try to add the account again. I hope it helps.
-
Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
Please help to set it up, thanks in advanceYou need to give more info..
Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
Most likely you have bridged it when it should be in router mode..
Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
Change it to working as a router. That might help.
If you press reset button it will default back to router btw.
If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547 -
View only works in one direction,will not change when I turn the phone
view only works in one direction,will not change when I turn the phone
Is the rotate lock on?
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/ -
Drag the component from one cell to another cell within JTable
Hi All,
I have one requirement to drag the component from JList to JTable cell. I am able to do it but once if i drag the component from list to table cell, table accepting the drop after this i am unable to move the same component from one cell to another cell within the table.
Any advice.
I have used the following logic for JTable and JList is drag enabled.
DefaultTableModel tableModel=new DefaultTableModel(
new Object [][] {
{null, null, null, null,null,null,null},
{null, null, null, null,null,null,null},
{null, null, null, null,null,null,null},
{null, null, null, null,null,null,null}
new String [] {
"Title 1", "Title 2", "Title 3", "Title 4","Title 5","Title 6","Title 7"
JTable table = new javax.swing.JTable(){
public boolean isCellEditable(int row, int column)
return false;
table.setModel(tableModel);
table.setDragEnabled(true);
table.setDropMode(DropMode.INSERT);
table.setTransferHandler(new TransferHandler(){
public boolean canImport(TransferHandler.TransferSupport info){
if (!info.isDataFlavorSupported(DataFlavor.stringFlavor)){
return false;
return true;
public boolean importData(TransferSupport support) {
if (!support.isDrop()) {
return false;
if (!canImport(support)) {
return false;
JTable table=(JTable)support.getComponent();
DefaultTableModel tableModel=(DefaultTableModel)table.getModel();
// fetch the drop location
JTable.DropLocation dl = (JTable.DropLocation)support.getDropLocation();
int row = dl.getRow();
int col=dl.getColumn();
// fetch the data and bail if this fails
String data;
try {
data = (String)support.getTransferable().getTransferData(DataFlavor.stringFlavor);
} catch (UnsupportedFlavorException e) {
return false;
} catch (IOException e) {
return false;
calendarTableModel.setValueAt(data, row, col);
return true;
});Thanks & Regards,
Maadhav.
Edited by: maadhav on Jun 23, 2009 12:29 AMHi All,
I fixed this issue with some additional logic which allow me to drag and drop the string component from one cell to another cell within in the JTable.
I am attaching the new logic here, if any one needs use it.
DefaultTableModel tableModel=new DefaultTableModel(
new Object [][] {
{null, null, null, null,null,null,null},
{null, null, null, null,null,null,null},
{null, null, null, null,null,null,null},
{null, null, null, null,null,null,null}
new String [] {
"Title 1", "Title 2", "Title 3", "Title 4","Title 5","Title 6","Title 7"
JTable table = new javax.swing.JTable(){
public boolean isCellEditable(int row, int column)
return false;
table.setModel(tableModel);
table.setDragEnabled(true);
table.setDropMode(DropMode.USE_SELECTION);
table.setTransferHandler(new TransferHandler(){
public int getSourceActions(JComponent c) {
return DnDConstants.ACTION_COPY_OR_MOVE;
public Transferable createTransferable(JComponent comp)
JTable table=(JTable)comp;
int row=table.getSelectedRow();
int col=table.getSelectedColumn();
String value = (String)table.getModel().getValueAt(row,col);
StringSelection transferable = new StringSelection(value);
table.getModel().setValueAt(null,row,col);
return transferable;
public boolean canImport(TransferHandler.TransferSupport info){
if (!info.isDataFlavorSupported(DataFlavor.stringFlavor)){
return false;
return true;
public boolean importData(TransferSupport support) {
if (!support.isDrop()) {
return false;
if (!canImport(support)) {
return false;
JTable table=(JTable)support.getComponent();
DefaultTableModel tableModel=(DefaultTableModel)table.getModel();
JTable.DropLocation dl = (JTable.DropLocation)support.getDropLocation();
int row = dl.getRow();
int col=dl.getColumn();
String data;
try {
data = (String)support.getTransferable().getTransferData(DataFlavor.stringFlavor);
} catch (UnsupportedFlavorException e) {
return false;
} catch (IOException e) {
return false;
tableModel.setValueAt(data, row, col);
return true;
});Thanks & Regards,
Maadhav..
Edited by: maadhav on Jun 23, 2009 5:26 AM
Edited by: maadhav on Jun 23, 2009 5:28 AM -
Mouse Track Ball only working in one direction
Hello,
My Mighty Mouse is 3 months old and now the track ball is only working in one dircetion.
When I move the ball forward I hear the distinct sound and the scroll bar on e.g. Safari moves, but when I reverse there is no movement on the screen.
I don't hear the same sound as when I move the track ball forward.
I have tried to reboot but no improvement.
Have someone seen teh same issue? Is the solution to simply replace the mouse?
Thanks / ChristerUse the instructions in this article to clean the mouse.
(15069) -
Google iPad Sync Microsoft Exchange - Sync only works in One Direction
I have setup my iPad to sync with Google calendar using Microsoft Exchange, which supposes to work bidirectionally.
I found that it only works in one direction such that anything in my Google calendar (includes all the subscribed calendars in Google) got sync to my iPad. After I add a new event in my Google calendar, it is pushed to my iPad.
On the other hand, any new event I add to my iPad calendar is not updated and shown in my Google calendar. This means the sync works only in one direction:
Google Calendar Event --- sync ---> iPad (works perfectly and the event is pushed almost pushed instantly)
iPad Calendar Event. --- sync ---> Google Calendar << FAILED >> (Event entered to my iPad never shows in the Google Calendar)
Sync works unidirectionally but not bidirectionally
Anyone has encounter this problem and is there any solution?
iPad iOS 3.1 PC Windows 7 / using Google & iPad CalendarI am having the same problem. Would be good to have a solution.
Maybe you are looking for
-
Do I Have To Keep My Mp3s/Movies In iTunes?
Hello All!! I have about 40 GB of movies and mp3 files on an external hard disk. In order to transfer these files to my new iPod Touch I copied them into iTunes on my MacBook Pro (where they eventually ended up in the folder /Users/<username>/Music/i
-
Can i run itunes from an external harddrive and if so how?
LIke i'm not a complete pleb and i know full well that this should work in theory i am just worried about moving the "itunes" folder to my external harddrive because i feel itunes will then say 'can't find library' or something. I have a G4 emac you
-
Getting a JFrame to display from a JSP, remaining JSP code waits for frame
Hello, I'm new to Java and just started using JSPs. My objective is to call a display window (from a JSP) that shows the user a list of project selections. Once the user has made their selections and clicked a Submit button, the display class capture
-
WhatsApp notifications on Lumia 710 keeps piling u...
My notifications have been piling up since late Monday - any reason for that? All the messages was received and read - why does the notification on the tile not go away?
-
Possibility to abort the execution from within the PreUUT and MainSequence
Hello, This is probably a TS newbie question that most of you can answer right away! I'm using the sequential model to develop my test. I cannot figure out how to do terminate the execution from within the PreUUTLoop or MainSequence callback. In the