Nokia 6680 maximal MMC size

Hello
I want ask, what is maximal size of RS-DV-MMC cards that can be used in Nokia 6680. I was looking for it on web, but I didn't find it. I want buy 4GB card but I am not sure it will work properly, post, please, what card do you use and what biggest you tried (remember that card can work properly for example up to 2GB and when you reach this point it may crash etc.).
Thank you

It IS possible to change the font on a nokia 6680!
Just install a new font of a bigger size. More info can be found on : http://www.symbian-freak.com/tunning/fontquide/fonts.htm
CheersMessage Edited by z500 on 22-Nov-2005
07:12 PM

Similar Messages

  • 6680 - RS-MMC deleted images

    Hi
    Please help me, i had some very important images of work projects on my nokia 6680 RS-MMC, when i come to back them up i accidentally deleted them and now i'm an panicing that i've lots not just images but possibly a promotion.
    Does anyone have any software that will recover these files!
    PLEASE HELP!
    cheers
    Glen

    really? thanks
    onre more question though, i found a rs-mmc card with the dual voltage 2.7 & 3.6 volts, but the manual says, and i quote:
    "This device uses a Reduced Size Dual Voltage
    (1.8/3V) MultiMediaCard (MMC)"
    soo.. does that mean i have to find a dv-rs-mmc that operates at EXACTLY 1.8/3V?
    thanks again

  • Nokia 6680 Support..!

    Hi, Everybody...
    I have Nokia 6680 mobile, as i read it production date is 2005, and nokia corporation stopped production of it....
    *Now i have some question about its support, and which thing can i do in many situations to renew it, here is it:
    1- can i get updates for software for 6680 by nokia suite or PC suite??
    2- if nokia didnt realease updates for it, can i download that old updates and install it by my computer??
    3- its memory card is (MMC card), in my country i didnt found this type of memory, is that in all other countrys also??
    4- is there any new mobiles use the same type of this card memory type, so i can find it??
    5- if i have some problems in my 6680 mobile, can i take it to nokia care point??!! or they will say that there is no support for it now??
    6- is there any type of support for it in the nokia sites??
    7- is nokia still sell its accessories like handfree or memories cards or other in nokia stores???
    8- what is other things can i do for my 6680 to (Refresh) it ?!!

    Moron wrote:
    Can i get updates for software for Nokia 6680 by Nokia Suite or PC Suite?
    Yes. However, that is not your question: Whether you get the latest version, depends on your Nokia Product Code. Furthermore, the last version was released in 2005.
    Moron wrote:
    Can i download that old updates and install it by my computer?
    Yes, Nokia Software Recovery Tool.
    Moron wrote:
    In my country, I didnt found this type of memory, is that in all other countrys also?
    No, here, MMCmobile is still available on eBay, second-hand phone shops and camera shops.
    Moron wrote:
    Is there any new mobiles use the same type of this card memory type, so i can find it?
    Not aware of, Nokia changed to microSD in 2007.
    Moron wrote:
    If i have some problems in my 6680 mobile, can I take it to Nokia Care Point?
    Cannot speak for Nokia Care.
    Moron wrote:
    Is there any type of support for it in the nokia sites?
    What are you looking for?
    Moron wrote:
    Is Nokia still sell its accessories like handfree in Nokia Stores?
    Cannot comment because I am not aware of any Nokia Store worldwide anymore. Sometimes, genuine Nokia Care Centre do have old accessories. Nevertheless, they come at a price for those who really care. By the way, I recommend the Nokia AD-45 because with that you can attach any earphone you like.
    Moron wrote:
    What is other things can i do for my 6680 to (Refresh) it ?
    Sell it as long as it works (and gives) money and move on to a Nokia E52.

  • About Nokia 6680

    anyone have any clue if the Nokia 6680 can read 2GB memory cards?????
    this to be exact....
    2GB DV RS MMC MEMORY CARD
    thanks!
    DON'T HIT KIDS... THEY HAVE GUNS NOW.

    Possible i believe. You can browse some mobile forums for more further info's, incase you're still skeptical on getting into it.
    Make sure you have the latest firmware installed on the phone, and lastly get a branded one's - Sandisk, Kingston, and Nokia.

  • Capture picture with nokia 6680

    I'm developing an application for Nokia 6680, and need to access the videoplayer through my gui so I can capture a picture and send it to a webserver.
    I'm having trouble initializing the player. It throws a MediaException with Symbian OS error -5, "the operation requested is not supported".
    It works just fine in WTK 2.2 and with SE K700.
    I've also checked the supports.video.capture system-property, and it returns true.
    Here's the code:
    class CameraForm extends Form implements CommandListener {
      private final MyMIDlet midlet;
      private final Command exitCommand;
      private Command captureCommand = null;
      private Player player;
      private VideoControl videoControl;
      private boolean active=false;
      private StringItem messageItem;
       public CameraForm(MyMIDlet midlet){
          super("Camera");
          this.midlet=midlet;
          messageItem = new StringItem("Message","start");
          append(messageItem);
          exitCommand=new Command("Exit",Command.EXIT,1);
          addCommand(exitCommand);
          setCommandListener(this);
          //initialize camera
          try {
             player = Manager.createPlayer("capture://video");
             player.realize();
             //Grab the videoControl and set it to the current display
             videoControl=(VideoControl)(player.getControl("VideoControl"));
             if(videoControl != null){
                 append((Item)(videoControl.initDisplayMode(VideoControl.USE_GUI_PRIMITIVE,null)));
            captureCommand = new Command("Capture",Command.SCREEN,1);
            addCommand(captureCommand);
            messageItem.setText("OK");
        }  else{
            messageItem.setText("No video control");
    } catch(IOException ioe){
          messageItem.setText("IOException:"+ioe.getMessage());
    } catch(MediaException me){
          messageItem.setText("MediaException cameraForm(): "+me.getMessage());
    } catch(SecurityException se){
          messageItem.setText("Securityexception:"+se.getMessage());
    }Thanks!

    Peter,
    Sorry for the late reply, have been really busy the past weeks.
    Yesterday I got another Nokia 6680 on which my MIDlet wouldn't run. Got the MediaException -5 (meaning "Not Supported") again.
    I tried the code *#7370# to hard reset the phone (see Step 1 below), with no success. But I did manage to get it working (after continuing with the procedure below).
    The following explains the steps I followed:
    NOTE: Backup all data on your phone before continuing as all will be lost!
    Step 1:
    a.) Enter the code *#7370#
    b.) Answer [Yes] to the following prompt: "Restore all original phone settings? Phone will restart."
    c.) Enter the security code when the phone prompts for it. (Default: 12345)
    d.) The phone will now restart.
    e.) Once restarted, all data will have been erased and the phone will ask you for some settings.
    Step 2: This is a bit tricky...
    a.) Turn off the phone.
    b.) Press and hold the following keys: [Answer] + [*] + [3]
    [Answer] = Answer key (green phone)
    [*] = Star key
    [3] = Numeric 3 key
    c.) While holding the above keys, press the [Power] button to switch on the phone.
    d.) Once again all data will have been erased and the phone will ask you for some settings.
    Step 3:
    Follow Step 1 again.
    Install your application after each step and test to see if it isn't maybe working. My MIDlet only started working after completing Step 3. I am not sure if Step 1 is actually necessary, but I have listed it as this is the path I did folow.
    That is it, hope this works for you.

  • Urgent Advice Nokia 6680

    Hi. I need a big help. I own a Nokia 6680 that has lasted me for five years until yesterday. I usually maintain a four digit numeric password to access my cell whenever it is turned on. The digits are 2300. Once the password is entered then I will be have full access to use all the functions of the cell. Now the problem is that, the key pad number for Number 2 is not working! All other key pads are working. I took it to the local Nokia Care showroom where they say the problem is not the keypad but the board itself. I think they said the mother board is no longer working. However, if the motherboard is not working, then none of the keypads should work. Everything is working except for keypad Number 2. The Nokia Care persons tried replacing the keypad but still nothing worked. I am happy the 6680 has lasted me all these years, but the problem now is that I have more than 600 contact details on the phone memory that I am not able to access. Is there a WAY to break the password? Any software or device? Once the password is broken, then I can access the cell. Every few months I backup the phone memory details on the memory card but without accessing it on this cell, I am not able to retrieve it. That is the miserable part. I was told there is a software known as Noki Crack. Does this work? Or is there a simpler way? Please advice. Thank you.

    Okey, I understand. Only a Nokia care point can fixe this for you as this is related to hw issue with your keyboard.
    You can find your nearest Nokia care point here: http://europe.nokia.com/support/repair-and-recycle/repair/care-points

  • Nokia 6680 Standby Mode Problem

    I cant change my Nokia 6680 Standby Mode. Its disapeard. When I go to Setting and then Standby Mode, I cant see Activate Standby Mode there anymore. Ive formated phone memroy but still I cant...Anybody has any information about this problem?

    15-Mar-2008 07:57 AM
    clairelouise73 wrote:
    Hi. I've recently been given a Nokia 6680 which I've had unlocked and started using. I've found that when I plug my charger in the phone indicates it is charging but once I pull the charger out (after various periods of time) it shows up as low battery. I have tried 2 different chargers and 2 different batteries. I am currently using an old nokia phone to charge up a battery to put in the 6680 every day. Help? Am I doing something wrong??
    Prior to it being unlocked it charged up no problem.
    If you have a new phone you need to keep it on charge for 16 hours. Once the battery is fully charged the charge indicator stops moving which would tell you that the battery is full.
    If my post has helped you please click the white star on the right

  • Nokia 6680 - switch message from off?

    Hi,
    I would like to send anonymous text messages with my 3G contract nokia 6680. Is this possible?
    Please advise.
    Thanks in advance.
    Nagsy

    don't think its possible to send texts without your number coming up!!

  • Nokia 6680. . Help pls.

    Hello, i have my Nokia 6680. I've been searching my manual and different sites for me to know how can I modify my screen saver on my phone. Pls help me..

    Hi sam_0317
    You could try Psiloc screensaver available from:
    http://shop.psiloc.com/en/Application,65552,Psiloc+Screen+Saver
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Nokia 6680 unable to send texts

    I've had a Nokia 6680 for about 7/8 months now. In that time its every so often decided its memory is full (when it isnt) and be unable to send texts. This was normally fixed by turning it off and on. About a week ago this stopped fixing the problem. Over the next few days I had to put up with not being able to send any texts. 3 days ago I hard reset it a few times and it fixed the problem. However the problem has returned again. I really dont want to have to hard reset my phone every few days since thats a bit annoying.
    Has anyone come accross this before? (Phone memory is 66% free, RAM is 99% free and MEmCard is 40% free).

    Very odd, don't really know what to suggest about that one!
    Try entering the number as 0044 instead of +44.
    If you have delivery reports enabled, try disabling them or vice versa.
    Make sure "Reply via same centre" is set to "no" in the messaging options.
    Can't really thing of much else to try! My guess is that it's an odd network fault that is blocking it.

  • Nokia 6680 new firmware?

    Hi guys,
    Did Nokia realese new firmware for Nokia 6680?:
    v5.04.40
    20-11-06
    RM-36
    I was just checking for the new firmware for Nokia 6680,
    via Nokia Software Updater. And I was surprise to find there are
    new updates. Then I upgrade my 6680 from v5.04.07 to v5.04.40.
    After upgrade, I notice that there are some difficulties in making & receiving calls, and sending SMS. I'm staying in Malaysia and using Celcom 3G. I refer the provider on this matter, and they said their network is ok.
    Could it be the upgrades?
    What are the changelog for v5.04.40

    Yeah, that's what I thought. An upgrade is suppose to improve the use. Unless, the new firmware has a tiny bug, or it's an unofficial release. I looked up in the Internet, so far, no info about the new firmware.
    Can Nokia release an unofficial firmware?
    Thanks for the help.
    Firdaus
    xxxxxxx

  • Nokia 6680 Spanish language lost

    I own a Nokia 6680 with product code 0521642 brought in Spain. Today I updated it with NSU (never had updated it before) and it has rebooted with english language. It doesn't give me the option to change it, only English, German and Turkish are available as languages. What should I do?

    Your 6680 was not a Spanish version originally, the update restored the original languages.
    If you take it to a local service centre and explain situation they can advise you further.
    First use the search to see if your question has already been answered...
    Secondly I will not knowingly assist in breaking the forum rules.
    My information is always changing, what I post at the time is usually true.

  • Maximal FIFO size on RIO device with DMA

    Hi!
    I am now a happy LabVIEW 8.2 user since a few days   Now I want to use the new DMA function implemented into the FPGA Module 8.0 for several acquisition jobs.
    Therefore based on the following paper:
    DMA Improves LabVIEW FPGA 8.0 Throughput by 20X
    http://zone.ni.com/devzone/conceptd.nsf/webmain/c1013cb24fc508ef8625708b0071b3fb
    "To use DMA, simply create two memory buffers – one in memory on the
    FPGA device and one in memory on the host processor – and LabVIEW
    efficiently and transparently transfers data over the PCI bus from the
    FPGA VI to a host VI. The LabVIEW FPGA 8.0 Module uses FPGA
    configured for FIFOs DMA to write to DMA memory and uses FPGA
    Invoke Methods on the host side to create and read from host memory"
    The question is: Is it possible to create an FIFO on the FPGA device which is larger than the 96k addressable onboard memory? (maximal FIFO size approximatelly the RAM size of the host PC? --> theoretical) I suppose not, because I can't compile it anyway
    If not, is there a possibilty to use the DMA functions to write many measurment values from the RIO device to the host PC? More than 96k...
    Regards, Helmut_K

    Hello!
    The FIFO on the FPGA side is restricted on the size of the memory you have on your FPGA-Chip.
    The idea is to create a "small" FIFO on the FPGA, which send via DMA on a larger FIFO on the Host side. So you can have a FIFO bigger than 96k, because the FPGA send directly the data to the host.
    Hier a tutorial:
    http://zone.ni.com/devzone/cda/tut/p/id/4534
    Best regards
    Ken

  • Plz help lost my arabic langauge nokia 6680

    Plz help i lost my arabic langauge when i update my phone "nokia 6680"
    i found 3 langauge English Deutsh Turkce
    i need english , franch and """""""arabic"""""""
    what should i do ?
    please help ???????????????

    You could use the "Search" function of the site and read about others with the same problem with Arabic.

  • How to update software of nokia 6680??please help ...

    software

    Hi ZaffarKhan,
    Welcome to Nokia discussions board!
    Thank you for your post. To update your Nokia 6680, you need to download Nokia PC Suite on your PC and install it. After the installation, open it and plug in your device to your PC with the USB cable, once it recognises your device it should search automatically for the latest update.
    Tell us how you're getting on
    Sergent
    If my response has helped you in any way, show it by hitting the WHITE STAR... If you don't a MONSTER will come and eat your lunch...
    Also hit the Accept as solution button, so OTHERS can benefit from this helpful answer...
    DON'T BE SHY...

Maybe you are looking for