Nokia 6680 - Standby gone since latest upgrade

ive just upgraded to the latest firmware upgrade from the site and now my active standby has totally disappeared from the phone. anything i can do about this as i use it alot?

Have you made sure it is active.
try, menu> tools> settings> Phone> Stand by mode> thens set active stand by to on.
Peace Out
The Bearded One

Similar Messages

  • Nokia 6680 Standby Mode Problem

    I cant change my Nokia 6680 Standby Mode. Its disapeard. When I go to Setting and then Standby Mode, I cant see Activate Standby Mode there anymore. Ive formated phone memroy but still I cant...Anybody has any information about this problem?

    15-Mar-2008 07:57 AM
    clairelouise73 wrote:
    Hi. I've recently been given a Nokia 6680 which I've had unlocked and started using. I've found that when I plug my charger in the phone indicates it is charging but once I pull the charger out (after various periods of time) it shows up as low battery. I have tried 2 different chargers and 2 different batteries. I am currently using an old nokia phone to charge up a battery to put in the 6680 every day. Help? Am I doing something wrong??
    Prior to it being unlocked it charged up no problem.
    If you have a new phone you need to keep it on charge for 16 hours. Once the battery is fully charged the charge indicator stops moving which would tell you that the battery is full.
    If my post has helped you please click the white star on the right

  • Itunes will not allow music to sync since latest upgrade

    Trying to sync music to two different ipods and ipad. since downloading the latest itunes version, no music will sync to either device.  I have checked selected songs (different for each device) and it will recognize 1755 songs but on the capacity bar, no audio is showing and when syncing, no music is transferred. I have tried restoring each device, all have latest upgrades....don't understand why it won't sync properly.  any ideas out there?

    this is a bug that came with the latest update. haven't seen any way of getting round it i'm afraid: http://www.apple.com/feedback/ipodtouch.html

  • My screen is blinking since latest upgrade?

    What causes screen to blink or flash? This started after latest upgrade. How can it be fixed?

    OK, well that isn't very definitive. However you can try some basic resets like doing a PRAM reset and SMC resets. If you don't know how to do these then please click:
    https://discussions.apple.com/docs/DOC-3603
    You may need to do each up to 2-3 times for them to work.

  • Keyboard shortcuts are gone since Yosemite upgrade

    I use a large number of keyboard shortcuts (the ones accessed in System Preferences -> Keyboard -> Text).
    Since the upgrade to Yosemite, the personal ones I've created (and which are still visible in the menu) do not work any longer.
    The default ones from Apple, however, still function properly.
    What do I have to do to get these working again?
    I've tried obvious things like re-creating the personal ones. No go.
    Thanks for any help on this.

    ½ ¼
    You can add the ½ ¼ to your own shortcuts and then use them like before:
    To enter the shortcut use the character viewer:
    ¼ etc. are in the Basic Latin section of the unicode table:

  • My screen on iPhone won't rotate since latest upgrade

    My screen on iPhone won't rotate since latest upgrade

    Look in the status bar to see if you have accidently turned on the orientation lock. It would be an icon near the battery icon that looks like a small lock with a circular arrow around it. It will also be in the Control Center, when you swipe upwards from the bottom of the phone screen. Top row of icons, the last one on the right. White is on, black is off.
    I've also asked the hosts to move your post to an iPhone forum, so you can get more assistance.

  • My personal Hotspot is gone since I upgraded my Iphone5 to iOS8,what should I do?

    My Personal Hotspot is missing since I upgraded to iOS8,what should I do?

    Check and enable Settings -> Cellular -> Cellular Data (Enable it)
    If above does not solve the problem, then please try Settings -> General -> Reset -> Reset All Settings

  • Since latest upgrade why does my iPhone and iPad battery usage seem greater?

    Following the latest upgrade (April 2014) the battery usage on both iPhone and iPad is greater than before (50%+ in one day). Any ideas why or do I need to close anything?

    Hi Irfromgbr,
    For battery troubleshooting, please check out the following article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    And for extending your battery life, the following article has good suggestions:
    Batteries, iPhone
    http://www.apple.com/batteries/iphone.html
    Thank you for using Apple Support Communities.
    Nubz

  • [SOLVED] CUPS-printers gone since last upgrade

    Last weekend I upgraded my system and everything went smoothly. A day or two later I noticed, that printers on remote machines are no more available, not even visible. They work fine on the machines they are connected to but are not even visible from my machine.
    One printer is an old HP LaserJet 5L at an old sidux distro, where cups is of version 1.4. It worked for ages and hasn't been touched in any way since sidux has gone.
    The other printer is a HP LaserJet P2055d at an archlinux server installation, which is up to date as my (client) machine is. So. latest cups (ver. 1.6).
    Until last weekend the connection to those printers was easy, I even had not to go through the Add Printer wizard of cups (using Firefox). The printer always were visible and IIRC coul be added with a click on an oK button. Until now to go through the Add-Printer wizard was only necessary for SAMBA printers: Other network printer, choose Windows Printer via SAMBA  etc.
    SAMBA printers work, however.
    So I thought I go through that wizard for my remote cUPS printers too. But no success: Printer not available, wrong URI and the like.
    Sorry for my lengthy post, but I don't know were to look first and what to check. The cups config files don't seem to habe been changed, so I'm a bit lost and need some pointers.
    poseidon
    Last edited by poseidon (2012-08-09 19:16:38)

    swordfish wrote:
    poseidon wrote:
    I went through that and coulbn't find anything that applies to my situation (well, at least I think so). Even "Remote access to web interface" doesn#t seem to apply because the remote machines weren't touched. And, I have access to them.
    poseidon
    Hi there,
    with Cups 1.6 the avahi-daemon has to be up and running before cupsd is started. Is this the case with your configuration?
    No, so I have corrected the rc.conf of the server machine, stopped cupsd, restarted avahi-daemon, started cupsd. No success. Did this on server and client machine. Shouldn't my client machine be able to find that printer when I press Find New printer?
    Okay, Plan B: I've always had difficulties to see which protocol to use and how the URI should look like if I use the Add Printer wizard. Any pointers besides the cups documentation (which is rahter hard to understand)?
    poseidon

  • Nokia E52 email issue since firmware upgrade (031....

    Hi guys,
    Yesterday i successfully upgraded my E52 to latest firmware - 031.012. After upgrade i removed all previous email accounts (1 MFE, 1 pop and 1 imap) and start a new setup.
    i have to mention, that i double checked that the email client version has updated to 2.1.0 (the old one was 2.0.5). There are also several visual changes during the email setup.
    Now here is my issue: I recreated my exchange email account and it works perfectly, but when i try to add a second email account (Email->New), choose one of the providers from the list (Windows Live for example) and proceed here is what happens:
    1. I get a promt to enter email address and password
    2.Then "Validating settings" and "Downloading terms" progress bars start
    3. After "Downloading terms" progress bar completes i am returned at the page where have to choose email provider again
    Is there someone with similar issue as mine when has upgraded to 031.012? I hope someone will give me a clue how to fix it...
    Thx in advance!
    Regards,
    Emil

    On E52 or E72 (I haven't checked on other handsets), The problem occurs only if you try to add an account which is previously registered on Nokia Messaging Website http://email.nokia.com/ or has been added as an additional account within the Nokia Messaging Account.
    Before adding/creating a new email account on E52 or E72, make sure the account has not been registered at Nokia Messaging Website or if it has been registered then make sure to delete those accounts before you add them in your phone newly.
    You can delete account from Nokia Messaging Website by logging in with that account first on the website.
    Remember that you have two ways to remove the account from Nokia Messaging Website.
    1- If the account was used initially to signup on the website (actual Nokia Messaging Account) then you need to login with that account and Cancel the membership. It will delete all the additional accounts if you have added any.
    2- If the account was added as an additional account in an existing Nokia Messaging Account, then again you would need to login with the Nokia Messaging Account and delete the account from the list as needed.
    Note: If you are wandering that you never manually registered on the above website by visiting it on your computer, then keep in mind that the account is automatically registered on the website when you try to add or create the account on the Nokia Email Client on your phone. This could probably be the case that you would have registered once in the past via your Nokia Email client or directly on the Website. In either case you would need to remove the accounts from the Nokia Messaging.
    I haven't read this any where but this is what I have got during fixing and finding the solution. I have created accounts on E52 (more than once after upgrading firmwares) very easily by following the above procedure. What ever it is, a bug? or an intentional reason, I don't know.
    I hope it could fix your problems with the New Nokia Email client built-in with E52
    Edit:-----
    Note1: You would have to wait for a few minutes after removing the accounts from the Nokia Messaging Website, before trying to add in your phone. 
    Note2: First add the Ovi Mail Account(make sure you have it signed-up and configured on http://www.ovi.com/) in your phone and then add any of the other accounts later.

  • Syncing Issues since latest upgrade

    Everything has been working great with my iPhone 3G until upgrading to the latest iTunes program. Since then I am unable to sync my calendar or contacts between my PC and iPhone. I have Outlook and it synced just fine yesterday before upgrading. After the iPhone backs-up and right before it is to sync I get a message that says the "SyncServer has stopped working". Another message then pops up and iTunes tells me it can't sync unless syncing is turned on and it tries to turn it on, but to no avail.
    I'm at a loss at what further to do. I've read many of the recommended actions/fixes and have had no luck.
    Any advice and help in resolving this issue would be greatly appreciated.
    Thanks,
    Jim

    Wheeeeeeeee success after a week! I followed these instructions:
    Make sure Itunes is closed.
    Go to your control panel, open 'system' icon, click on 'advanced system settings' on left panel.
    Click 'Environmental Variables'
    A small window will pop up, with a top half and a bottom half filled with info.
    On the bottom half (System Variables) scroll until you see 'PATH'. Double click that entry, and paste this at the very end of what is there.
    ;C:\Program Files\Common Files\Apple\Apple Application Support
    Notice the ; in front, that needs to be there so this does not screw up the rest of the info in the PATH variable. Please be careful to paste this at the very end.
    Then I searched my C drive for this file - libxml2.dll. It should be in the Apple folder, if there is another one somewhere else (mine was in C/Windows, sometime it might be in C/Windows/System 32). I moved this folder to the desktop, just in case everything went pear shaped.
    I am not sure if you need to do both these things, the first alone never worked but when I moved the libxml2.dll everything worked as normal when I re opened I tunes and connected my Itouch. Outlook contacts and calendars now sync both ways.

  • Since latest upgrade I cannot "print" or show "print preview" from any web page. This is true of both of my printers and I have followed directions on plug-ins and have reinstalled Firefox etc. I am about ready to switch to Internet Explorer! w

    Since upgrading Firefox, it doesn't respond when I click on print and/or print preview while displaying web pages.. No error message, just no response. I tried using both my printers..a HP and a Canon and get no results with either. I have no problem printing from any other place (including "Print" instructions within web pages, usually). I have recently upgraded my desktop (Dell Vostro 220) to Windows 7 and it went smoothly. The Firefox upgrade came at about the same time, so I don't know if Windows 7 is part of the problem. I need be able to print from the screen of web pages!

    Hi jjoyceeric,
    Have you looked at the Knowledge Base article [[Firefox prints incorrectly]]? There is some good troubleshooting information in there. I would suggest that you try resetting your print settings.
    Hopefully this helps!

  • Disc utility not burning since latest upgrade

    The latest daylight OS 10.4.8 upgrade has somehow disabled my DVD drive to recognize a blank disc when trying to burn a .dmg from the disc utility. I've ran disk repair permission and restart, turned off OS 9 nothing seems to work. It seems that each time there's any type of firm ware or security upgrade I have to install a fix it plug-in...such as what happened to the previous upgrade and it's effect on iSight. Very frustrating.

    If you have not done so already:
    Go to the bottom of the Disk Utility window & click on the ? mark inside the purple circle.
    A Help window will open up. In the search field type burning images or dvd.
    Then click on the troubleshooting topic that pertains to your issue.

  • Contacts either duplicate or gone since cloud upgrade.

    Okay Verizon.  I am at my wits end here.  Upgraded to cloud, followed wizard and only choice my contacts and a few select files to be uploaded.  Next day all my contacts on my phone are duplicated.  As I understand the info cloud is supposed to automatically replace backup assistant but mine is still on phone so I think that must be the problem.  Remove backup assistant from phone, next day I have no contacts at all.  Luckily they are online so I sync.  After sync only part of contacts are there.  From what I an tell anything put on phone in last several months are gone.  Also things like groups and photo assigned to contacts are gone.  I spent over 30 mins putting this info back and literally as I make last fix the phone goes back to home screen by itself and when I go back to contacts every contact is gone again.  I have synced, imported from a year+ old backup save when I got the phone, and even manually put in the contacts, all is fine for a day or so, then they are either duplicated or gone. 
    To add to my frustration Verizon support has been worthless.  Nothing even near on topic comes up when I search.  Even this site asks me to pick where to put the post without any guidance as to where it should go.  I hope someone sees this that can help.

    As Jake suggested go with Google if you have an Android phone enter your Gmail account and from there you can do two things you can set up your contacts on the Online Site and then sync them to your phone or set the contacts up on your phone and when your done, Go onto the Main online site and there you can check all your contacts,  re-adjust & update them if needed all on the main Gmail site and once your finished it will sync to phone and make the necessary corrections..
    Good Luck b33 

  • Since latest upgrade to 7.0.1, I cannot attach a file to my emails

    Since the last Firefox upgrade, now 7.0.1, I cannot attach files to my emails using MobileMe Mail. I us an iMac, OS X Version 10.6.8

    Hi Swarnava
    I upgraded to Firefox 8.0 but, regrettably I am still unable to attach any files to my emails. Mail on my iMac will however accept the atachments.

Maybe you are looking for