Nokia 6680 Standby Mode Problem

I cant change my Nokia 6680 Standby Mode. Its disapeard. When I go to Setting and then Standby Mode, I cant see Activate Standby Mode there anymore. Ive formated phone memroy but still I cant...Anybody has any information about this problem?

15-Mar-2008 07:57 AM
clairelouise73 wrote:
Hi. I've recently been given a Nokia 6680 which I've had unlocked and started using. I've found that when I plug my charger in the phone indicates it is charging but once I pull the charger out (after various periods of time) it shows up as low battery. I have tried 2 different chargers and 2 different batteries. I am currently using an old nokia phone to charge up a battery to put in the 6680 every day. Help? Am I doing something wrong??
Prior to it being unlocked it charged up no problem.
If you have a new phone you need to keep it on charge for 16 hours. Once the battery is fully charged the charge indicator stops moving which would tell you that the battery is full.
If my post has helped you please click the white star on the right

Similar Messages

Standby mode problem

anyone ever have this problem wit their S10 netbook where you flip the screen down and the computer goes into standby mode, but after an hour the computer boots itself up and the screen turns on? This has happened to me ever since I got my netbook and I don't know how to keep the computer from waking up. Thanks!
Solved!
Go to Solution.

Hi there...Update to latest BIOS ? and check all settings in ....
Lenovo Energymanagement
sincerely KalvinKlein
Want more ? For further information to get the most of your S-Class machine
Lenovo Energymanagement
Backup
Windows 7 Vista XP Driver all S-Series
Windows 7 Install
Clean XP Install
XP Startup
Small WebCam Guide
Lenovo Easy Capture
Resolution > 1024 x 576 / 600 Works with XP Only
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Standby mode problem - iPhone 4S

I have an iPhone 4S, 16GB, firmware 5.0.1.
When I click on the stanby button, and the iphone goes to standby mode,
sometimes happens that when I click the stanby button againt it doesn't works
and is blocked with black screen.
The phone fails to resume from standby.
The only thing I can do is keep pressed both power and home button.

Configure the router to do DHCP automatically, try not to hard code the ip address.
1. Try rebooting the router.
2. See if there's a firmware update for your router.
Read this: http://support.apple.com/kb/TS1398

Nokia 6680 illumination-sound problem

Hi,
I hear a very disturbing buzzing noise in my phone when my 6680 display is illuminated.. This is very annoying while calling. There is absolutely no noise when the backlight is off . Did anyone also experienced this problem with a 6680?Message Edited by z500 on 15-Nov-2005
07:26 PM

In the Settings app, try turning down the display brightness a notch or two. Does it help?

FiOS + VCR + Standby Mode = problems for my Grandma.

So my Grandma just got FiOS. She still "tapes" stuff using VCR's (crazy, I know... but she ain't changing).
Problem is, since she's had FiOS, she has been left with a bunch of tapes that contain nothing but the black standby "Press Menu to blah blah blah" screen instead of the shows she was supposed to be recording.
Is there any way around this in her situation?
Thanks in advance for any help.
Solved!
Go to Solution.

By default, the remote will turn off / on both the TV and the STB when you press the power button. Normally that is exactly what you want to occur. You can however disable that sequence and make it so that the power button only works the device you have selected on the remote.
From the remote documentation:
On the remote:
1. Press and hold the STB key.
2. While hlding down the STB, press OK
3. Release both keys. The Device keys will blink twice.
4. Press 9 - 7 - 7. The STB key will blink twice.
5. Press OK. The STB key will blink 3 times to indicate success in programming.
Now, to turn off the TV, press the TV key and then the Power button. To turn off the STB, press the STB key and then the power button. To work the STB, press the STB key followed by whatever commands you wanted to perform (channel, volume, etc.)

Nokia 6680 - Standby gone since latest upgrade

ive just upgraded to the latest firmware upgrade from the site and now my active standby has totally disappeared from the phone. anything i can do about this as i use it alot?

Have you made sure it is active.
try, menu> tools> settings> Phone> Stand by mode> thens set active stand by to on.
Peace Out
The Bearded One

Nokia 6680 - Keypad Light Problem..

Hi can anyone tell me why my keypad light switches itself off while the screen remains bright? Its impossible to text in the dark!

I have often wondered this, mine does exactly the same. I have S/W Vers 4.04.07.
I can only presume that it's some sort of battery saving feature that Nokia have put into the unit. What the unit should do is keep the keypad light lit whilst buttons are still being pressed and then only turn off when no keys are pressed for a certain amount of time.
Any ideas people???
Gadget
Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail.

Nokia 6680 Memory Card problem

I brought an RS DV 512mb card from mobymemory.com and it worked fine for a while but gradually my phone memory decreased and i only have 128kb of phone memory left. This means i cant recieve messages, enter or edit a new contact, change display pic or log missed calls.
Please help it is intensley annoying!

That shouldn't be due to the memory card (what gets written on the memory card has no influence on the phone memory), but must be something else that's been stored on the phone memory, instead (music, photos, videos, ringtones, installed software applications, or something).

Problems with standby mode in Windows XP

Every time I try to put my computer in standby mode while in Windows the entire computer shuts down. I can't even manually turn on the computer in Mac until I press the power button mulitple times. Anyone have any suggestions?

Tony, some posters have reported that the XP drivers for the Vostro 1500 will work for the M1330.
Vostro 1500 XP downloads
However before installing any Sigmatel driver after an OS installation you should follow this order of driver installation:
a. Install Dell Notebook System Software R154270 (click the + sign next to System Utilities). Restart.
b. Next install the Intel Mobile Chipset driver 153997 (click the + sign next to Chipset). Restart.
c. Finally re-install the Sigmatel audio driver R158235 (click the + sign next to Audio).
Some v1500 users have reported that they had to "uninstall an unknown PCI device in Device manager first , then install the driver normally".
Rarely there will still be a problem with the installation at this point (in XP). In those cases follow this tip from forum member rpilT2005: check in the Device Manager for a "PCI Device" with a yellow question mark next to it, under the "System Devices" grouping. Hit 'update driver' on that one, and it should find the driver.
A previous poster was able to get his audio working by following the above instructions more or less He said that after installing the Chipset driver he next uninstalled the unknown PCI device. He let Windows look for a new driver but he said he had to point it to the folder with the driver. Then he wrote, "Xp still said that an error occurred and the device may not work properly, but it did work fine and I also don't have a yellow question mark..." I know this is confusing.
Jim

How do I change to PC Suite Mode in Nokia 6680?

Hello,
when connecting my Nokia 6680 to a Computer, it doesn't ask me to select a connection mode. However, there is a program that obviously needs me to select PC Suite Mode or Nokia Mode.
Since I didn't find an option for that in the phone, can someone tell me if it's possible to change to PC Suite Mode?
Thanks in advance.

m8, Go to Tools->Settings->Connection->USB-Select PC Suite, then put Yes on Ask on connection. It will ask you what mode you wanted to connect.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

W520+Win7-64, Standby Mode: MessageBox Problems ejecting...

Hello world,
I'm using a SSD in the internal harddisk slot and the original harddisk running in an ultrabay adapter. Windows is installed on the SSD. Each time I go into standby-mode and return, I see the message box "Problems eject XXXX, the device is currently in use...."
In the eventlog there are multiple messages saying
"The application \Device\HarddiskVolume2\Prog\xxxl.exe with process id 4796 stopped the removal or ejection for the device IDE\DiskST9500420AS_____________________________0003LVM1\4&8a9acb7&0&0.1.0."
followed by a
"Device action request for device 'IDE\DiskST9500420AS_____________________________0003LVM1\4&8a9acb7&0&0.1.0' was vetoed by 'STORAGE\Volume\{2483acec-a2e3-11e0-9cfe-fe3c617a851b}#0000000000100000' with veto type 6."
Has anybode an idea how to get rid of this messages?
TIA,
Bernd

I think I have a related issue. I have a SSD with my old drive in the ultrabay also
On wake up, the kb lights flash, the mechanical hd starts to spin, and then nothing. After a couple of seconds
the process repeats. It seems like something is timing out or there is some kind of power problem because the
NVIDIA GPU is being used. I don't see a message because I have to reset by pulling power and battery.
Wakeup is fine when in the Optimus mode.
W520 4270-CTO | 2720QM | 16 GB RAM | Quadro 1000M | BIOS 1.34 | PwrMgr 3.66 | 256 SSD

My ipod nano, when it enters standby mode, pause the reproduction of music, how do I solve this problem?

My ipod nano, when it enters standby mode, pause the reproduction of music, how do I solve this problem?

This is usually an indication that your headphones are not plugged ALL the way in. The white part of the headset should be flush with the body of the Nano and no silver from the headphone plug should still be seen.
B-rock

Strange problems with pc suite with nokia 6680

i'd had installed pc suite v6.7 on windows xp sp2 with all new adds from microsoft update(from a total succesuful uninstall with post addition of running nokia suite cleaner 3.1).
installation was perfect OK. I am using DKU2 cable
the suite recognize and install the correct drivers and the status was that "nokia 6680 was connected via USB"
all it seems ok and also nokia pc suite sais that the phone is connected but if you try to launch any application or to browse the phone with phone browser it goes to error (impossible to complete operation")
in my opinion there is something left or bad installed on the phone on previous attempt (probably the PC suite support application) because i was no asked of any confirm on the phone in the connection phase. In the c:/system dir on the phone infact there is a suiteconf.xml file related i think to that app.
IF it is the problem cause Please indicate how to clean the phone or how to install (even manually the correct app). ù
thanks

Do you mean that you cannot open any applicaiton in PC Suite ? (Backup, Sync, Application installer, Connect to Internet and all those ?) None of them won't even open up ? If that is the case, the installation has not succeeded and it does not relate to the SIS package that was installed during previous installations of PC Suite. Please indicate can you get any of the Nokia PC Suite applications to work (excluding the applications that are built in to Windows Explorer) then it is easier to try to figure out what is wrong.

Problem with firmware nokia 6680

I'm italian and I don't speak very well english, but I try it :-P
I have two nokia 6680, today i try to upgrade my firmware ...
first phone all ok, nokia updater download the lastet firmware italian and istall it and all ok
in the second nokia upgrade download ENGLISH firmware (all work but I'm italian)
In wich mode I update my second phone with nokia italian firmware ??
Excusme for my English !!!
Thank's to all

jjegen seems to have differently than I. From what I see, tapping on the dialler and contacts on homescreen does nothing?
Your phone settings have had trouble. I would suggest restoring factory settings.
Go to MainMenu>green button>you will see the dialler. Type in *#7780# and enter your security code.
If that does not work:
Soft reset is *#7370# - this deletes all data on phone memory so make sure you have a backup.
OR
A hard reset (x6, 5800 and 5230 only) is done by the following (warning, this deletes all data on your phone):
1.) Turn off the phone and remove battery for 5min
2.) Reinsert battery
3.) Press and hold the green, red and camera buttons. DO NOT LET GO.
4.) While holding the three buttons, press the power key to boot the phone up.
5.) Keep on pressing until you see the country selection screen.
A correctly done hard reset would show you that everything on the phone (contacts, messages, calendar entries, etc) would be deleted. So it is advisable to back them up. Upon restoration, do not restore settings or files if possible.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Nokia N9 on Standby Mode Displaying Time

My N9 is displaying time on the standby mode. Is there a way to switch off this feature.
Thanks
Solved!
Go to Solution.

Turn it off in menu->settings->device->display/screen-> wait/standby mode. Sorry for the bad translation. I don't bother to turn on english as it needs a reboot

Nokia 6680 Standby Mode Problem

Similar Messages

Maybe you are looking for