Nokia 7210 and BH 106 blue tooth

Hi
Nokia 7210 is not compatible to BH 106 blue tooth. How can make it compatible.
Any drivers required of BH106. Do let me know?

Hi there!
Just to verify is it the first 7210 or the 7210 Suprnova?
If it's the standard 7210 ... no Blutooth Haedset is compatible, installing driver is not also an Options and is not possible at the same time.
if it's the 7210 Supernova, there are few compatible Bluetooth headset for this phone model. you can follow this link to check on the compatible Bluetooth Headset: http://www.nokia.com.ph/find-products/accessories/all-accessories/headsets/bluetooth-headsets.
Hope tis' help
"If you think this post is helpful, please click on the green button"

Similar Messages

I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

I was searching for how to setup the 903+ and my W520 and came to this thread.
1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
but if you are going to go BT headset....
2. What I did for the 903+
Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
Required reboot.
Activated the Bluetooth with FN + F5 menu.
Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
Ran the updated Bluetooth driver install.
Rebooted for good measure.
Double-clicked the Bluetooth Tray icon.
Clicked Add A Device.
Turned off my 903+ and continued to hold down the power to enable pairing mode.
Showed up in devices and added it.
Worked for audio. There are probably additional options for enabling the mic.
Hope that helps whoever might find this thread.

Nokia e90 printing problems via Blue Tooth

I cant print any words or excel documents with Blue Tooth with the Nokia E 90. I just bought a Canon Pixma 100, with Blue Tooth, but i cant make it work. Can anyone please help??

Have u switched ON the bluetooth in both the devices, does ur laptop have Bluetooth built in, Which version of Windows is your laptop running if its vista or Win7 you can use the built in bluetooth stack, go to control panel > bluetooth devices. and try to connect, If its Winxp then u need to download the drivers from Nokia website
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

How do I make siri use the mic on the iPhone and not the blue tooth mic?

When I get in my car, the blue tooth connects to the built-in car kit. I want to use the car kit for phone calls, but I want to use the iPHone mic for Siri. Siri always gets it wrong when it uses the car mic. Is this possible?

When I get in my car, the blue tooth connects to the built-in car kit. I want to use the car kit for phone calls, but I want to use the iPHone mic for Siri. Siri always gets it wrong when it uses the car mic. Is this possible?

Blue tooth not recognizing my car phone

I restored my phone from iTunes and now my blue tooth is not recognizing my car phone. Any ideas?

You need to pair it again.

Blue tooth quite working

My ipad 3 blue tooth and my iphone blue tooth have both quite working. Have done the hard reset nothing resolved. Need help??

on the Ipad it shows some of the devices but cannot connect or use any and with the Iphone it does not show any of the devices and cannot connect to anything. The ipad cannot see the iphone either. They both use to work it is very strange and I am frustrated and cannot figure it out.

Compatibility of Nokia CK-15W Handsfree Blue Tooth...

The Compatibility of this wonderful unit appears to be a proble. Though genrally understood that it is compatible with all Blue Tooth Mobile Phones but this only means that you can speak handsfree. It has very good voice, good connectivity but has issues related to Contacts Download(Does not download contacts), Signal strenegth(Does not display it) etc when used with Nokia 3230 phone.
Can someone advise me, is it a compatibility issue with this phone ot some other proble.

On Nokia Europe website it mentioned that "Display of operator name, field strength and battery level not supported" for this phone model when used with CK-15W. You can check this information from http://europe.nokia.com/A4399618 (scroll down this page and look for * about this information).
For downloading contacts from your phone check the Contacts download application (with instructions) from CK-15W support pages: http://europe.nokia.com/A4368365.

Internet over blue-tooth on nokia 5233

hi all , i buyed recently a Nokia 5233 mobile , and i was hoping i can connect to the Internet using blue-tooth , i been having Internet on the mobile , and of course i have a DSL connection , i have googled a lot before making this topic , please , if it is possible , i need the function as soon as possible

I have a LEXUS RX400h & a Parrot Car Kit. My iPhone pairs to both fine, but after about 5 miniutes of conversation the connection / speech clarity becomes so bad you have to hang up. Has anyone else had this problem / any thoughts on how to reslove it ? thx

HT1689 my ipad mini retina display is disabled. I believe I know the cause. I packed it with my blue tooth key board in my back pack. The key board likely entered various keys and the ipad believes these entries were invalid password attempts. I am tr

my ipad mini retina display is disabled because my blue tooth key board made number key entries while in my back pack. How do I re-enable?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

Hi, I bouhgt a used Apple Power Mac G5, I want to buy a blue tooth card for the same to use wireless keyboard and mouse, i am just curious that why do i need to provide the serial number of my computer, is there any compatibilty issue?

Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?

Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

Looking for an app for a blue tooth, type I want to use on my Iphone is a "jawbone" Question is out of the many available in the store which one would be the best and most reliable?

Looking for an app for blue tooth on my Iphone. Out of the many in the app store which one(s) would be the best & most reliable? Currently trying to set up for an older Jaw Bone?

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

I can no longer get my i phone 4 to pair with my autos hand free. the blue tooth on the phone is on and so is the sinc. thanks, cliff

i can no longer get my i phone to pair with my autos hands free. the blue tooth indicates it is on on my phone and the sinc is also on but neither auto can find a blue tooth device. any help will be appreciated. cliff

http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
http://www.mozilla.com/en-US/firefox/all-older.html

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

TS3253 I have iPad 2 and can't get it to see new Bose sound dock 10 also with blue tooth. iPhone saw it easily, not iPad...any help?.

Any help in getting iPad's blue tooth to find any device is helpful.

Touch or tap the field that you want to use/select and it should get a box around it ; then double-tap that field to activate/type it. Once you've entered your password you can do the same (i.e. touch to select, double-tap to activate) to gradually get into Settings > General > Accessibility > VoiceOver and turn it off.
So to enter your passcode you first need to tap the 'slide to unlock' button to hightlight it (it should get a box around it), then double-tap it to unlock it. Then for your passcode tap the digit that you want and it should get a box around it; then double-tap that digit to type it; and similar for the other three digits in your passcode.
The manual (http://support.apple.com/manuals/#ipad) also that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither

Nokia 7210 and BH 106 blue tooth

Similar Messages

Maybe you are looking for