Nokia 7370, No Network Access?

Hi, Wondering if anyone could help please? Just won a Nokia 7370 of Club Nokia a few week ago and it was working fine up to a few days ago. I am on O2 but all of a sudden i have no network access. My sim card is not at fault as it works in my old 5140i and I rang O2 but they said they couldn't have locked my phone. When I search for newtworks I pick up others except my home network but I am still not able to access these. Anyone have any ideas please? Is there a fault with the 7370? Thanks

hmmm... o2 locked a phone on me once, because they misread an email I sent - they thought it said I hadn't received it, when I actually said I had to go to the delivery office and collect it myself...
Anyway, try another o2 sim card in there and see if you can get on.
I'm jealous that you won it by the way - I've been entering those competitions and signing up to trial new handsets ever since they started doing it lol, never won yet
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Similar Messages

PLS HELP!Nokia 7370 HS-31 Headset problem! SOS!!!S...

Hi!
Today I'm buyed a new and original HS-31 phone headset, but when I connect this headset to my Nokia 7370 phone, the headset is very in undertones to run. I'm barely hear anything (radio or a call).
What's the problem????
Please HELP me!!!
It's very exigent for me!!!
Thank you!
Moderator Note: E-mail removed
Message Edited by kenken on 18-Aug-2008 01:28 PM

Hi Bungaroosh,
You have presented with certainly an unique situation. I suspect that first of all, the reason the website you rely on opens on your friend's Samsung is that a lot of websites out there have updated their support for more current web development standards....which for some older browsers accessing their websites can cause compatibility/rendering issues. I suspect that the company will want to cater for as many of their customers, and the number of users using severly outdated browsers numbers in the minority.
Firmware updates for the older DCT-4 phones such as your 6230i were only able to be performed via Nokia Care points. I enquried about updating my 7710 a while or so ago, and got the rather flat answer that my device was so old that they no longer had the equipment to update it. I suspect it would be the same in your case.
Not too sure that the HS-10 headset would be compatible with any of the newer Nokia's. There are a number of cheap Nokia newer headsets out there that would work with many of today's newer phones.
I understand your need for a phone that just does phone calls and texts, and the occasional train line check. I would recommend a phone such as the Nokia 110, but since it is using WAP 1.1, am unsure as to how much support it would have with today's websites. A safer bet is to use an Asha phone such as the 202, 203, 300, that has support for the newer websites. These you can get on the cheap these days anyway. And they will all pretty much play MP3's.
The 6230i is a seven year old phone, be proud that you extracted that much usage out of it . There are many newer options out there these days, and maybe there's a bit of a learning curve, but keep your mind open....you could be very pleasantly surprised by the features you gain and enjoy!
Hope this helps.

2630. java applications. Allow network access?

when entering some java application on nokia 2630 ,for example google maps, it asks:
"Allow network access? the application is not from a trusted supplier" for three times. On the fourth time: "try again later or try to install new version".
Some other applications are working allmost properly... but they use to ask every 5-10 seconds the same question: "Allow network access? The application is not..."
And some applications are working correctly. miniopera and jimm.
So, the problem is not in gprs settings.
What can i do with this problem?

You can either try to get hold of a trusted build of the application you want to run or you can change the Application access setting. When you have an application selected, click Option then Application Access and set the Network access Ask first time only.
Knowledge should be your Advisor when you need help.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

Nokia 7370 Power Saving Problems

Hi Everyone
I just got my nokia 7370 (the gold swivel one from the l'amour collection) and I'm having a minor problem.
When the phone is inactive it isn't displaying the date and time on a black screen as it should in power saving mode.
Power saving mode is switched on in settings but it isn't working.
Can anyone help me with this?
Any help will be greatly appreciated.
Thanks
p21b

well my operator (Videotron) here in Canada, i can only connect via 3G for calling therefore i sort of need 3G to make and receive calls, otherwise it's like being in Offline mode!
so i can understand this person's issue.
As i have the same problem.
Basicly whenever my phone activates Powersaving, it literally disconnects me from the network (no longer able to make and receive calls)
I am using a Nokia E7

LAN settings for HP LaserJet 500 Color MFP M575: printing OK, network access NO

Printing OK but Network access NOI have a M575 in office LAN.IP 169.254.204.142Subnet 255.255.255.000Router 169.254.204.1Other computers 169.254.204.2-100Everything was good. But couple days ago I was not able to connect to my HP from browser. I was check settings and: IP address on screen HP - 0.0.0.0 I can printing on my HP!!! (destination of printing is: HPLaserJet500ColorMFPM575)but can’t to change settings. I can't change IP adres in JETDIRECT printer's menu. In command prompt PING of 169.254.204.142 is OK… Hand settings IP on start (1/8 click ), searching in administrative menu, cold reset… nothing I don’t know what I can to do else.

This is my IPConfig screen:C:\>IPConfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : T420
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Peer-Peer
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Bluetooth Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
#2
Physical Address. . . . . . . . . : 60-D8-19-D8-A4-3B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection 6:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connecti
on
Physical Address. . . . . . . . . : 00-21-CC-66-CA-38
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::385f:1def:62ae:8cd5%75(Preferred)
IPv4 Address. . . . . . . . . . . : 169.254.204.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 29 xxxxxxxxxxx 2015 15:25:46
Lease Expires . . . . . . . . . . : 30 xxxxxxxxxxx 2015 15:25:46
Default Gateway . . . . . . . . . : 169.254.204.1
DHCP Server . . . . . . . . . . . : 169.254.204.1
DHCPv6 IAID . . . . . . . . . . . : 1610621388
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-69-54-50-00-1E-37-1A-5A-E8
DNS Servers . . . . . . . . . . . : fe80::5ef9:6aff:fedf:5f3b%75
169.254.204.1
169.254.204.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6205
Physical Address. . . . . . . . . : A0-88-B4-D2-3E-B0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 57:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{32EA8AA7-0304-411D-9B3C-9BE6D6E53F7D}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 135:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{0E880DF2-FD27-4BF8-BBD9-EA726316C1FE}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{FFBD17DC-A12B-469A-8135-C63D9BBEBB31}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #6
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\>

Acs 5.3 and wlc 2504 config with restricted network access

Hello,
i submit you the following issue that i'm actually facing:
i must configure a secured wireless network with access restriction based on SSID. the equipements are : cisco wlc 2504 (soft 7.3) cisco secure acs aplliance 1121 (soft 5.4) .
the users that will connect to the network are regrouped by identity groups, each identity group having it's own SSID. Clearly each group of users must access only one SSID.
i followed the procedure below to configure it:
-- creating user identity groups;
-- creating users and assigning them to the groups;
--- creating authorization profiles for each SSID under policy element/ authorization and permission/network access/authorization profiles and putting the Airespace-Wlan-Id(the SSID number) in the radius tab.
--- assigning the authorization profiles to the identity groups under access policies.
after all these config the users can access the network using there userid/password configured. But the problem is Every user can access every SSID, seems like the restriction is so not very well configured.
i found some documentation on this kind of config but the version of ACS used seems older than the one that i use, so menu are very different.
Please can someone provide with the right steps to follow to achieve this kind of config.
tkx in advance

Yes.. you only have to add the end filter like what I posted... as far as the calling station id in the WLC security tab, it doesn't matter because that is not used when using 802.1x. I would also try to not enable everything that you have just to start from the basic and make sure it works first. The WAP Authentication Method might or might not work for you. Uncheck that for now and when you have a successful authentication, look at the monitor log and see what radius attributes are being sent, because those attributes is what you can use to build your policies.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

ACS 5.3 - 11033 Selected Service type is not Network Access

I have some older devices on the network that only support RADIUS (not TACACS) for authentication and would like to have them use SecureACS 5.3
I understand that by default, ACS only supports TACACS for device administration. So I'll get this error when trying RADIUS:
11033 Selected Service type is not Network Access
Description:
RADIUS requests can only be processed by Access Services that are of type Network Access
Resolution Text:
Verify that the Service Selection Policy rules are correct
However, even after adjusting the Service Selection rules and seeing hits, I still see the same message in the logs, as if it has no affect. Any Ideas?

If you use the protocol as radius you can not use a device admin service. You can only use network access. That will allow you for authentication to the devices.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you"

ACS 5.3 cannot create default network access authorization rule

Hi, when I click 'Create...' under Access Policies > Default Network Access > Authorization, and then press the 'OK' button, it says 'Please configure at least 1 condition.' However I have no way to configure conditions as the 'Conditions' text is just bold text and not a link or any sort of configurable area. If I go to 'Customize' on the bottom right and add conditions to the right list box, I still have no options when I press Create. Also, the 'green light' next to Default Network Access is grey with a line through it. This is the most cryptic system I have ever used.. anyone have an idea? Thank you!

Looks like you are using chrome amd it's not a supported browser.
Supported Web Client/Browsers
You can access ACS 5.3 administrative user interface using the following Web Client/Browsers:
•Windows 7 32 bit
•Windows XP Professional (Service Pack 2 and 3)
•Windows Vista
•Internet Explorer version 7.x
•Internet Explorer version 8.x
•Internet Explorer version 9.x
•Mozilla Firefox version 3.x
•Mozilla Firefox version 4.x
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/release/notes/acs_53_rn.html#wp222016
Jatin Katyal
- Do rate helpful posts -

Network access and internet

Is it possible to allow network acces to devices and to internet only for domain clients? So if someone brings his personal laptop to work and connect it by cable to network he can not acces nothing on network or internet?
Solution with proxy is not good for me, so I am searching for something else.
I never left an open problem....I search, dig and ask, until it's solved....

Hi,
>>Is there a way to lock just DNS to AD clients?
Before going further, how was our network set up? Do we use DHCP to automatically assign IP addresses to clients? If we use DHCP server to automatically assign IP addresses, the computers connected to the network will automatically get
their IP address and DNS server IP address if we don't have a network protection mechanism to restrict which computer can get IP address from DHCP server. In this situation, although we know that you don't want to use Network Access Protection to do this,
as far as I know, this should be the solution which can best meet our target.
Besides, for this is more related to network, in order to get better help, we can also ask for suggestions in the following network forum.
Network Access Protection Forum
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverNAP
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Airport Extreme 802.11AC + 5th Gen and guest network access

I have the current gen Airport Extreme 802.11AC with a 5th Gen extending the network. With this setup, I am unable to login using our guest network setup. I have tried using guest network with a password and one without but its the same results. When a guest logins, it stuck attempting to login with no error messages.
So is it possible to have this configuration and still have guest network access?

Please review what I said originally.......that the guest network function on the AirPort Extreme is designed to work with a simple modem......so the AirPort acts as the main router for the network..
Another way of saying the same thing is that the AirPort needs to be "in charge" of your network for the guest feature to work correctly. The AirPort cannot be in charge if it is connected to another device that is already configured to be the main router on your network.....your Actiontec modem/router.
The Actiontec device combines the functions of a separate modem and a separate router in one package. This type of device is known as a modem/router, or also known as a gateway.
Some folks call a modem/router or a gateway......a modem. So, things can get confusing.
I do not know if it is possible for the Actiontec device that you have to be configured to act as a simple modem.....so the routing functions of the device are completely turned off. (Turning off the wireless on the Actiotec does not turn off the routing function).
If you turn off the wireless on the Actionec, it becomes a modem and a wired router. And that wired router is still in charge of your network.
The guest network feature will not work correctly unless the AirPort is in charge of your network.
My suggestion was for you to ask your Internet Service Provider (ISP), if they could supply you with a simple modem. That is all that you need. You don't need two routers....and the Actiontec that you have now is not allowing the guest feature to work correctly.

Cascading EA4500s and Guest Network access

Hi, I hope esomone can help me here. I've got two EA4500 routers connected via ethernet. The primary router has DHCP enabled and the secondary has it disabled. IP address of primary is 192.168.1.1 and the secondary is 192.168.1.2.
I have set up guest access on both routers however only the primary router allows users to connect. When out of range of the primary router but in range of the secondary router the network is visible but when you try to connect to it, it only gives limited or no connectivity message and can't connect to the internet.
Is it possible for the guest network access to follow the same pattern as the secure network, i.e. the same network throughout the house?
Regards
Jon

Cascading two routers should have correct parameters set. For instance, the Ethernet port of the secondary router should be connected to the ethernet port of the primary one, and the DHCP should be disabled on the second router. The ip address you've set are correct for the both routers. This thing shoud be done if the connection is LAN to LAN.
By the way there are two types of cascading: Click here for info!
For the Guest Network:
Guest Network would only work if the the DHCP is enabled on your router. It means to say that on the type of setup you're doing which is LAN to LAN (DHCP disabled on the second router), Guest network would not work on the secondary router. If the connection is LAN to WAN, then both of the router should have Guest Network working.

RemoteApps Error "Your connection was denied because of a Network Access Policy (TS_NAP). Please contact your server administrator."

Hello All,
Good day. May I ask if anyone experienced this error when trying to access remoteapps in Azure? We are using IaaS and set-up RDS using Windows 2012 R2 but we are getting an error below.
"Your connection was denied because of a Network Access Policy (TS_NAP). Please contact your server administrator.
Various roles and services (Broker, Session Host, RD Gateway and Web Access are installed on each VMs).
Please advise.
Thanks,
Glenn

Hi Glen;
Looks like the set up was not done correctly. Please follow the guidelines given on this
blog by Keith Mayer.
Regards;
Prasant

How do i turn on network access protection on windows 8.1 with an hp p6-2326S pc?

i got a phone call from a unknown source today at around 3 pm they said that hackers where trying to access my computer . they ran a scan and it showed thre things one was my network access protection was turned off . 2 hackers were trying to hack into my computer i cant remember the 3rd one its in my note pad but then i got this big run around and i told them from the start that i had no money and that i had just buried my mom on the 2nd of this month after a long battle and that i had just had a bad episode with my blood pressure wasnt feeling god and so on ,all of which are true once i finally convinced the worker of the fact i had no money he put his super visor on the line .the supervisor was stalling i could tell im no dummy when it comes to software and computers i taught myself xp professional and the windows 8.1 which im still learning i finally got tired of his super visor retstartd my computer and got control uninstalled skype mozilla nightly and mozilla experimental and several other prorams with my revo pro uninstaller my computer is rinning smooth now but i have seen .that ny network access protection is turned off ,how do i turn this on and is it neccasary i have malware bytes new 2.7. something full time bought and paid for protection and windows defender .i run a discclean every day and my mal;ware bytes and windows defender any thoughts and ideas would be appreciated i do have HP SUPPORT ASSISTANT AND MY WARRANTY IS UP TO DATE AND PAID FOR .. sincerely donald hutchison

dhutch1 wrote:
i got a phone call from a unknown source today at around 3 pm they said that hackers where trying to access my computer . they ran a scan and it showed thre things one was my network access protection was turned off . ...
Hi,
Now the trouble may start, you did allow people to logon to your computer and you believe them ! HP Support Assisstant is there to support your technical problems it does not know you will open the door of your house for someone to comes in to steal your money.
Now, please change all your passwords to logon to email, bank account(s) ..... before too late. Also please download the following tool nd run on your computer, hope it can remove the nasty bits.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is it possible that network access permission control in acs 5.1

Hello
We have ACS5.1, WLC 7.0 and using 802.1x to authentication users.
Anybody know how I can configure network access restriction with using internal user group information.
For example, under the same SSID(like that "test") , same VLAN ID.
But two different user group has a different network access permission.
One group has full permission and the other has a limit network access permission.
Is it possible?

The equivalent of a NAR would be ACS 5.1 returning an authorization profile after authentication. Just configure your authorization policy to return one profile for one group of user and the other profile for the others.
Now to restrict access to the network, I think you're best with an ACL ? So link ACLs to your profiles.
Nicolas

ORA-24247: network access denied by access control list (ACL)error-UTL_HTTP

I am getting following ACL error while executing following procedure:
create or replace procedure sat_proc as
http_req utl_http.req;
http_resp utl_http.resp;
BEGIN
http_req := utl_http.begin_request('www.yahoo.com');
http_resp := utl_http.get_response(http_req);
utl_http.end_response(http_resp);
END;
exec sat_proc;
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "TRANSDBA.SAT_PROC", line 5
ORA-06512: at line 1
I am able to execute successfully while executing above code as PL/SQL block:
DECLARE
http_req utl_http.req;
http_resp utl_http.resp;
BEGIN
http_req := utl_http.begin_request('www.yahoo.com');
http_resp := utl_http.get_response(http_req);
utl_http.end_response(http_resp);
END;
PL/SQL procedure successfully completed.
Could help me find why I am getting error while executing same code in a procedure? Is there any privilege missing?

GRANT EXECUTE ON SYS.UTL_HTTP TO <your_user>;
SQL> set time on
17:21:01 SQL> set role none;
Role set.
17:21:23 SQL> @utl_http.sql
17:21:34 SQL> DECLARE
17:21:34   2 http_req utl_http.req;
17:21:34   3 http_resp utl_http.resp;
17:21:34   4 BEGIN
17:21:34   5 http_req := utl_http.begin_request('www.yahoo.com');
17:21:34   6 http_resp := utl_http.get_response(http_req);
17:21:34   7 utl_http.end_response(http_resp);
17:21:34   8 END;
17:21:34   9 /
PL/SQL procedure successfully completed.
17:21:35 SQL> connect / as sysdba
Connected.
17:22:47 SQL> connect dbadmin/admindb
Connected.
17:23:06 SQL> @utl_http.sql
17:23:22 SQL> DECLARE
17:23:22   2 http_req utl_http.req;
17:23:22   3 http_resp utl_http.resp;
17:23:22   4 BEGIN
17:23:22   5 http_req := utl_http.begin_request('www.yahoo.com');
17:23:22   6 http_resp := utl_http.get_response(http_req);
17:23:22   7 utl_http.end_response(http_resp);
17:23:22   8 END;
17:23:22   9 /
PL/SQL procedure successfully completed.
17:23:23 SQL> set role none;
Role set.
17:23:29 SQL> @utl_http.sql
17:23:31 SQL> DECLARE
17:23:31   2 http_req utl_http.req;
17:23:31   3 http_resp utl_http.resp;
17:23:31   4 BEGIN
17:23:31   5 http_req := utl_http.begin_request('www.yahoo.com');
17:23:31   6 http_resp := utl_http.get_response(http_req);
17:23:31   7 utl_http.end_response(http_resp);
17:23:31   8 END;
17:23:31   9 /
DECLARE
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at line 5
17:23:31 SQL> above is from test user
Below is from SYSDBA account
SQL> set time on
17:20:53 SQL> revoke execute on sys.utl_http to dbadmin;
revoke execute on sys.utl_http to dbadmin
ERROR at line 1:
ORA-00905: missing keyword
17:22:03 SQL> revoke execute on sys.utl_http from dbadmin;
revoke execute on sys.utl_http from dbadmin
ERROR at line 1:
ORA-04020: deadlock detected while trying to lock object
ACLiLZU+w09hR7gQAB/AQAjcw==
17:22:32 SQL> /
Revoke succeeded.
17:22:52 SQL> Edited by: sb92075 on Jun 10, 2010 5:24 PM

Nokia 7370, No Network Access?

Similar Messages

Maybe you are looking for