Nokia 7500 prism keys not working

Hi,
I hav a nokia 7500 prism.The left and right selection keys have suddenly stopped working.The right selection key displays 6 and left displays 4 in standby mode.They r not working in any other menus,no shortcuts working.Also the numeric key 5 when pressed displays 5 before the number which was pressed previously(eg. 345 gets displayed as 354.
can someone help me?

Try restarting the phone. If that does not work then you have have to try resetting. Try the restart first and lets hope it works.

Similar Messages

  • Nokia e71 menu key not working

    i recently updated the firmware of my phone, connecting to the computer using ovi. Now the problem is, when the menu key (left selection and home button) is pressed the menu doesnt open. This doesnt happen in the begining, but after some time it happens, and then onwards the menu doesnt open. Please give me a solution.

    Reset the E71. Dial *#7370# 12345 reformat, you'll lose all data. Make a backup first and restore without the settings.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • NOKIA 202 RED BUTTON NOT WORKING

    I JUST TURNED OFF MY PHONE 202 AND  after some time i try to switch on that phone but red button not worked  and other keybuttons works good and i try flash the phone but it says remove cable and batery and put cable and put batery and power on but funny thing is my red button not worked and i just got dull finally i am asking you guys is there any solution to power on i try almost all key board tricks i.e * 3 gren red etc  or a software to power on.MY NOKIA 202 RED BUTTON NOT WORKING 

    Hi, DEVRAMP. How did you flash your phone? Is there a battery indicator when you charge it? You may try the following solution below:
    Check that the keypad is not locked.
    Make sure that all keys are responding correctly when they are pressed. In some cases, a key may get stuck and freeze the whole keypad.
    Try removing and replacing the covers (if your phone supports that feature). Check that the power and side keys on the cover are properly aligned (e.g. pushed out) to their respective positions to have a proper tactile feel when pressing the keys. 
    Keep us posted. 

  • 6630: Certain Keys Not Working

    For some reason, my Nokia 6630 has certain keys not working. Actually, sometimes they work and sometimes they don't. I doubt it's a cover problem, because even when I take it out, the keys still don't work.
    The "1", "3", "C", Left, and Up don't work at all, and it's annoying. Some help, please?

    The phone is too old and I think it has no FW upgrade in NSU.
    I guess this could be a hardware fault. Better if you go to service point.
    But before that have you tried a hard reset?*#7370#.
    [It will clean up the phone memory, so better back up by PC Suit).
    Care points:
    UK
    http://www.nokia.co.uk/A4228006
    Europe:
    http://europe.nokia.com/A4388379
    Elsewhere:
    http://www.nokia.com and select your country.

  • Mah nokia lumis 710 camera not working... what to...

    mah nokia lumis 710 camera not working... what to do????

    When you try to open the camera either by hitting the camera key or going to the app list, what happens?
    1. Reboot the phone. Press the volume down and power keys together for 15 seconds until the phone vibrates and starts up.
    2. Check that the software of the phone is updated.
    3. Reset the phone by going to Settings > About. This deletes all the content of the phone so make sure to create a backup copy of your files. See "Reset and restore your phone" in this link to backup important data on the phone: http://support.microsoft.com/kb/2606900.
    If above steps would not help, bringing the phone to a Nokia Care Point is what I'd suggest: http://www.nokia.com/global/support/locations/

  • N81 clear key not working

    My N81 has problems with the clear key not working which is very frustrating when SMSing  I have had it back for repair once but still not working.  Any suggestions?

    Your only option is to take it in for repair again and demand that it is repaired.  Make sure you take it to a nokia care point, not just any phone repair shop.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • A s d f g keys not working on a wireless Apple keyboard for Imac

    a s d f g keys not working on a wireless Apple keyboard for Imac.
    When I type they on't work.
    *Exmple o complete entence.
    Plee help! Thi i very rutrtin. I on't wnt to ue cut n pte or ome letter.
    Thnk you in vnce.

    Make a Service appointment for the keyboard at your local AASP.
    Apple - Find Locations
    I'm not sure how old it is, but it is covered for 1 full year as long as it didn't take that 19 story dive.

  • Volume and brightness keys not working with new keyboard on imac

    I just purchased a new wired keyboard for imac and brightness and volume control keys not working . i have tried adjusting keyboard settings. I have software version 10.5.8. Do I need to upgrade software. Thank you for any help.

    Do you have "Automatically Adjust Brightness" check box ticked in System Preferences > Displays > Display ? If so, you can't manually adjust brightness.

  • Some keybaord keys not working after suspect virus on Tecra A

    Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
    This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
    Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
    Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
    I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
    Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
    The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
    Problems with this computer was found after scanning with a different antivirus.
    Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
    Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
    Thanks in advance.

    Thanks Xardas,
    I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
    You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
    Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
    Check out this guys post below found on Kioskea.net - getting close to a year ago...
    ms ml - Nov 10, 2009 12:52am GMT
    Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
    Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
    yab - Feb 9, 2010 4:47am GMT
    hi did you ever figure this out? i have the same exact problem...
    However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
    yab ms ml - Feb 9, 2010 7:57am GMT
    Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
    Incidently - never hear from the first guy again - probably ended up being his scroll lock.
    all sugestions welcome - sorry my smily face has no eyes -) guess why!

  • Esc key not working in windows 7

    Hi,
    I have a HP Pavilion dv6-4XXX series. It's almost been 2 years I bought this notebook. 
    Recently I faced an issue. The "ESC KEY" has stopped working. However I could find that it's working fine in BIOS but not when I am logged in to windows. I have windows-7 installed.
    Please let me know what could be the issue and the solution for the same.

    Hello siddharthmishra,
    You’re having a problem with the ESC key not working.
    Go to device manager and uninstall the keyboard and restart the computer. This should uninstall and reinstall the driver for the keyboard.
    Here is a link to device manager.
    If the problem has not been happening for very long, you might try a System Restore. This will take the system back to before the problem started happening without affecting any of your files.
    Here is a link to a System Restore.
    Let me know how everything goes.

  • Command, option, ctrl, fn keys not working

    thanks to a visiting dog who got tangled up the power adapter my laptop ended up on the floor, wide open with the keyboard popped out. I have inspected the connector cable and it looks OK to the naked eye. I disconnected the keyboard cable and re-connected.
    When using an external USB keyboard all keys function normally. When using the built-in keyboard the only keys not working are the command, option, ctrl and fn keys. I have restored modifier keys to default (I had never changed them) but this did not help. I also toggled the "use F1-F12 to control..." option in the keyboard preferences to no avail and have restored keyboard shortcuts to no avail.
    Is my keyboard shot? Is the a pref file I might delete?

    Hi, Mel. If the external keyboard works properly, I'm afraid you have to figure your built-in KB has been dogged to death. I hope the pet owner will do the right thing by you. I also hope the KB is all that was damaged. How are your adapter cord, plug, and DC-In port? Does your battery still charge OK?
    Whenever anything visits my house that's active, inattentive, and built low to the ground, my Powerbook runs on battery power only. I haven't seen one yet, but the new magnetically-connected, easily- and harmlessly-detached MacBook Pro AC adapters sound like a superb idea to me. Too bad our PBs can't use 'em.

  • N95 SHORT CUT KEY NOT WORKING

    Anyone had any problems with there N95 top left shortcut key not working,mine won't do anything when pressed then suddenly has a mind of it's own and keep pressing it's self and sending blank text messages to my first contact in my address book...
    Tried software load,no cure is it back to the shops..

    my daughters as just started doing the same i have updated the software and had buttons changed but still the same

  • Keyboard: some keys not working

    Some keys not working.  Need help/suggestions.  Not great with computers so PLEASE give details/steps re: how to do what you suggest - thanks!
    Details: intel based iMac running snow leopard 10.6.8.  Apple wireless/bluetooth keyboard (came with the iMac).
    Some keys suddenly stopped working:  space, tab, capLock, option key to the right of space bar (one on the left works), down arrow
    The problem happens in various programs (safari, pages, etc)
    The keyboard is fine on another iMac
    A different keyboard is fine on this/the involved iMac
    (nutshell: keyboard works fine - computer works fine, unless they're together)
    Here's what's been tried/checked:
    -checked the settings for universal access ("mouse keys" are off) and checked for any bluetooth keyboard shortcuts.
    -in system preferences "speech" is not set for "speak selected text when the key is pressed" - this is not checked/selected
    -tried creating a new user but had the same issue so it's computer-wide rather than just a user account
    -removed the keyboard and reconnected (using the +/- signs and "disconnect" and putting in a new code of numbers to pair keyboard)
    -language/text is set for english
    -did the keyboard viewer and the keys in question did NOT highlight when pressed (but don't forget the entire keyboard is fine on a different computer so thekeys aren't the issue)
    -"slow keys" is turned off re: keyboard in system preferences.
    Any help is welcomed.  It's frustrating knowing the keyboard works, just not with this computer.  Please help.  Many thanks!

    yes - not sure how this works...if you can see my original post there are a lot of details in there.  If you can't...
    nutshell: the keyboard works on a different iMac
                 a different keyboard works on this/the involved iMac
                 I tried to create a different user and the keyboard still does not work so it is computer-wide
                 I also removed the keyboard from the computer (using the +/- symbols and disconnecting and then repairing it.  The problem remained
    Thanks for any help.  It's crazy that the keyboard is fine and the computer is fine but together, there's the problem.
    Thank you!!!

  • Sound key not working

    volume key not working ofter last update

    Hello Amandodsouza,
    It sounds like you are experiencing some unexpected behaviour with the on screen keyboard after updating to iOS 7.1.1. I would start by closing all the running apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that and restart the phone and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • E545 and Function key not working

    Any help here is apprecited. My function (Fn) key is refusing to work at all. None of the special features are able to be used. I've checked all my drivers, and followed the instructions in the User Guide, but some of the options described in the guide are even showing on my computer.
    I'd love for some help on this issue, as the computer is pretty worthless right now.

    Hi Jamesbjenkins,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with keyboard function keys not working on your ThinkPad E545.
    Is the system updated with all the latest drivers and application? To confirm with I request you to run ThinkVantage system update tool. This will search for all the required drivers and application for your system and will update.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Can't print to an HP 3015dn

    I am having a problem printing from Firefox 4 to an HP LaserJet 3015dn. The computer is running Windows XP 32 bit with service pack 3. I get an unknown error occurred but the HP status message shows that a document was printed. The same web page will

  • Sign In to iCloud always appear on my IP4 screen and likewise draining my battery

    anybody pls help me solve this problem, has been happening the past 4 days

  • 'FND_SESSION_MGMT.ATTACH_SESSION' must be  on enabling Passivation

    The issue is related to Activation/Passivation. We have a AM which is based out of BI RTD Schema, which does not have supporting fusion state management schema like FND_SESSION_MGMT, FND_GLOBAL and PX_TXN related packages/procedures. But during appli

  • What is Silverlight? In Plain English, Please.

    Referring to: http://go.microsoft.com/?linkid=7472851  Do you know what I wish?  I wish, just for once that a simple and concise description of what a product is and what it really can do could be posted right up front, on the landing page, or at mos

  • Swingbench don't show correct TPM?

    Hi all, i'm using swingbench for retrive TPM information, but i don't know why it shows me low TPM values. My server is BL480C (2 CPU quad core) with 16Gb of RAM, oracle 10g SGA size is 6Gb and is sizing enough for OLTP. i've create with ccwizard a s