Nokia 770 Internet Table and e-mail view

Hi I cannot view any image in html email message, why?
I've upgrade the sysop at the current release... I've forgot to set something ?
Best regards

I recieved an update from Nokia support center. For everyone wondering, here's the deal, as far as I get it 6303i comes with embedded Nokia messaging application instead of the usual s40 native e-mail client; that's why there's no e-mail alert tone option in the profiles' settings. However, when you try to enable e-mail alerts from inside the Nokia Messagign application, you get an error message stating that this option is unavailable. What I could make out is that, as s40 doesn't support multitasking, Nokia Messaging can't be left running in the background and therefore can't alert you on new e-mails. As I see it, it's a design failure.
Nokia, if you couldn't make Nokia Messaging e-mail alerts work in s40, why didn't you just leave the good old native e-mail client, for crying out loud???!!!
Regards,
N. Y.

Similar Messages

  • Can a Nokia 770 Internet Tablet link with a Sony E...

    Can a Nokia 770 Internet Tablet link with a Sony Ericson K750i as a Modem?

    Did a little more digging and found that quite few people have problems getting this phone to do dialup with anything other than a laptop and SEs own software.
    reason is that SE use some funny command structure, instead of *99# they use *99***1#
    The number 1 there is important, it is the internet profile to use for the dialup, there will probably be several settings in
    Menu->Settings->Connectivity-> Internet Settings -> Internet Profiles ->
    In the phone, and so the number will need to match the one that is configured for Internet access (and not Wap or MMS)
    Also the N770 will need to be configured to send *99***x# (change the x to the number of the connection). I have never used the 770, but looking at the user guide you need to go to
    Control panel > Control panel > Tools > Mobile operator setup wizard
    Create a connection as described on page 27 of the user guide, the settings will be network operator dependent, but the key thing will be to configure the Dial-Up number to be *99***x#

  • Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

    Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

    That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
    Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
    These little tweaks are the only thing I HATE about upgrading my OS.

  • Base a datablock on a table AND on a view

    Hi all. I'm on developer suite 10g.
    I want to base a block for some items on a table and for some items on a view.
    I would make a join condition in the where clause of the block and in the query data source name property I put table and view separated by comma.
    When I go runtime I have unable to perform query error.
    How can I make this block based on the table and the view?
    Thanks for collaboration,
    Fabrizio

    You can base an Oracle Forms Block on a Join, but you have to fully qualify each item so Forms knows which table/view the item belongs too. Take a look at Oracle Forms Block Based on a Join white paper for more information.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Nokia Internet Tabled Video Converter Help!

    Hi guys,
    I recently bought a 5800. I used Nokia's Internet Tabled Video Converter to convert my videos.
    However, there's no sound after converting my avi, xvid and divx files
    please help

    I think you should try OVI Suite to convert instead of the internet tablet software since the internet tablets (N770, N810, etc) are different than the 5800.
    ...who's more foolish?, the fool or the one who follows him?... ovi-wan

  • View on "Transparent Table and DataBase View" ????

    Hi
    I have three transparent tables and four database views in R/3.
    Is it possible to create the view on "Transparent Table and DataBase View". Please let me know
    kumar

    no it's not possible.

  • Nokia 770: Can't Surf The Net In Hotels

    When trying to connect my Nokia 770 Internet Tablet while in hotels, I find that my success is hit and miss. But I can use a laptop and connect. The difference is the browser on the laptop defaults to a web page from the ISP where I have to agree to some terms before being allowed to surf the net. How do I get to this default page with the Nokia 770?Message Edited by cxbank on 26-Jan-2007
    11:30 AM

    Well, both really. Sometimes I can open the browser and surf for a while fine, then it hangs. Other times it hangs as soon as I open the browser. I've also noticed that the iTunes visualizer hangs unless it is in full screen mode. It never used to do that. In fact, I used to have trouble getting a full screen visualizer, now it's all I can do. Windows is updated. I suppose I could try sound and video card updates.

  • Nokia 770 flash update?

    Hi,
    I've just bought a nokia 770 internet tablet running os2006 operating system with adobe flash 7.
    I've noticed that websites such as facebook and other flash heavy websites insist on having flash 9 installed. Is there any workarounds for me to get it installed?
    Also is there any way of installing a version of msn I know of some software called gaim/ pidgin but I'm not sure how to install it can I download it straight to the tablet without using a pc?
    Regards
    Phil

    You have to wait until Adobe releases Flash 9 for the device (might never happen).
    For (all the available?) software compatible with the 770, you can go here:
    http://maemo.org/downloads/OS2006/

  • Creating Customized Table and Modify Table Maintenance Screen

    Hi,
    I have already created customized table and generate the table maintenance screen, however i encountered 1 problem which is i cannot add new PAI and PBO module in the flow logic. Every time i wanna add new module, i will be getting error message saying that my user currently editing the screen. Any suggestion ?
    Thanks.
    Jon

    Hi <b>Jonathan</b>,
    Please close all the windows and relogin
    For making PAI and PBO modules, Please activate all the Table and its maintainence view.
    Now first make emptu file with <main filename>_PAI and <main filename>_PBO save and activate them.
    Now put the logic in them and then activate now call these in the main prog.. it should work...
    While activation all the sub program modules should be activated already... i suggest select all the prog and sub progs and activate them all at once...so the system automatically takes care of inner activations first...
    If u have some more quereies... please feel free to contact me...
    Regards,,
    <b>Abhishek</b>

  • Ipowerweb and outgoing mail server issues

    getting my POP account on my iPhone to send mail successfully has proven to be difficult.
    why is it that on my old Nokia E61 my incoming and outgoing mail server settings "mail.mydomain.net" worked regardless of whether i was on edge or wifi -- yet on my iPhone the only way i can send email is to turn wifi off, and input "cwmx.com" as my outgoing mail server and send sloooowly over edge?
    i guess my question is, what is different about the way the iPhone connects to different servers, if my old phone did not have any issues with it at all - and how can i remedy this? shouldnt it be as simple as sycing the settings from my POP account on my G5? what am i missing here...and is this specific to ipowerweb hosting?
    thanks

    aegez,
    As a point of clarification, if you are going to use Port 25 on EDGE you have to use cwmx.com. Many networks filter port 25 traffic because of port 25 traffic has been abused by people sending unsolicited bulk email (aka spam). AT&T's EDGE network is not the only network to filter port 25.
    The iPhone in some situations will try other common ports, many of which will require authentication.
    If you are using an outgoing mail server that requires authentication on a port besides port 25 it should work on both WiFi and EDGE in most situations. The exception would be on networks that filter traffic on all ports as a security major, such as some work environments.
    This article includes more information on outgoing mail:
    http://docs.info.apple.com/article.html?artnum=305634
    This article indlues settings for some ISPs:
    http://docs.info.apple.com/article.html?artnum=306074
    Hope this helps,
    Nathan C.

  • MSN on nokia 770

    Hi all is there way to get msn on my nokia 770 internet tablet many thanks heard program called pidgin but what one do i download
    * Windows
    * Source
    * Fedora Core
    * CentOS / RHEL
    Thanks

    This page has all you need to know to install the maemo version of Pidgin on your 770: http://pidgin.garage.maemo.org/

  • Different types of tables and modes

    Hi Experts
    What is the specification of different tables in console and different modes in data manager.
    What is the major difference between them.
    Can we create a table of one type in console and can use the same table in another mode in data manager, say if I create a taxanomy table and can I use it as the hierarchy mode in the data manager.
    have fun..
    Hari

    Hi Hari,
    Differnt types of tables in Console are :
    Actually the Tables in Console are further categorized as :
    Main Table and Sub table which include:
    Flat Tables : It is a simple table consisting of record and fields ( rows and column) . In MDM Main table is always a flat table.
    Hierarchy Table : A hierarchy table organizes information in a hierarchy, where each record is related to a parent record (even if the only parent is the root) and may also be related to sibling records and/or child records.
    Taxonomy Table : A taxonomy is the classification scheme that defines the categories and subcategories that apply to a collection of records. Categorizing records enables you to isolate subsets of records for various organizing, searching, editing and publishing purposes.
    Qualified Table : A qualified table in MDM stores a set of lookup records,and also supports qualifiers, u201Csubfieldsu201D that apply not to the qualified table record by itself, but rather to each association of a qualified table record with a main table record. MDM supports multiple simultaneous qualified tables.
    Tables are also Categorized as Object Tables like :
    Images : For storing Images
    Sounds : For Sound File.
    Videos : For storing Video Files .
    Binary Objects : To store Binary Objects.
    Text Blocks : To store block of text.
    Copy Blocks : Stores block of text interpreted as a Copy.
    Text HTML`s : Stores block of text interpreted as a HTML.
    PDFs : To store PDF files.
    There are various types of Special Tables also:
    Image Variants : Used to define the structure
    and format of each of the variants for each image. Each variant is a modified version derived from an original image; the original image is never modified.
    Masks : In this defined subset of records are included in Mask i.e. in any scenario whether new records are added or deleted in the repository the records in the Mask remains the same unless edited by the user.
    Families : Used to further partition main table records in each category into smaller groups based upon the values of other fields and/or attributes.
    Relationships : Used to define each of the different record-level relationships. Each relationship can be either bidirectional (sibling) or unidirectional (parent-child).
    Workflows : Stores the workflows of an MDM repository, where each workflow is stored as a record in the table.
    Name Searches : Unlike Masks in case of Name search there are again a defined set of records but those records are selected on the basis of Search Selection. In this case if a record is added then the record is checked whether it fulfills the particular search criteria if it does than it is added to the Name serach else not.
    Data Groups : Stores the hierarchy of data groups used to break the entire set of objects in the MDM repository into manageable subgroups.
    There are various types of System Tables :
    Roles :  A single table named Roles. One of three tables used to implement MDM repository security and access control. Each role can selectively grant or deny access to any MDM function and to any table or field. This table is managed in the MDM Console and is not visible in the MDM Client.
    Users : A single table named Users. One of three tables used to implement MDM repository security and access control. Each user can have one or more roles. This table is managed in the MDM Console and is not visible in the MDM Client.
    Connections : A single table named Connections. One of three tables used to implement MDM repository security and access control. Contains an entry for each currently connected MDM client application, which can be terminated by the MDM Console user. This table is not visible in the MDM Client.
    Change Tracking : A single table named Change Tracking. Allows you to specify the fields for which adds, modifies, and deletes should be tracked and stored in the Change Tracking table.
    Remote Systems : A single table named Remote Systems. Used to define the different remote systems for import and export. Each specifies whether it supports inbound, outbound, or both. This table is managed in the MDM Console and is not visible in the MDM Client.
    Ports : A single table named Ports. Used to encapsulate the logistical and configuration info for inbound and outbound processing of MDM data, for consolidation and distribution respectively. This table is managed in the MDM Console and is not visible in the MDM Client.
    Links : A single table named Links. Used to specify the URLs that can be used as the target of an embedded browser in the Web tab in the MDM Client. This table is managed in the MDM Console and is not visible in the MDM Client.
    XML Schema : A single table named XML Schemas. Used to identify the XML schemas for import and syndication. Each XML schema is the name of an .xsd file. This table is managed in the MDM Console and is not visible in the MDM Client.
    Reports : A single table named Reports. Contains an entry for each report file generated by the various MDM repository operations, which can be accessed and viewed by the MDM Console user. This table is not visible in the MDM Client.
    Logs : A single table named Logs. Contains an entry for the log files generated by the MDM Server, which can be accessed and viewed by the MDM Console user. This table is not visible in the MDM Client.
    Data Manager:
    Data Manager in simple terms can be stated as a place where we manage the data that is taken from various systems.
    All the data that you take from all the various systems that a business is using is then taken into data manager, so that it could be cleansed and can be maintained easily in future.
    There are basically four different modes in Data Manager:
    1. Record Mode:  This mode allows us to search, view and edit the records of any table in MDM repository. This is the mode that one uses most often, primarily to view and edit records in the main table and also to view and edit records in any of the sub tables.
    2. Hierarchy mode. This mode allow us to view and edit the hierarchy tables in the MDM repository, including regular hierarchy tables, taxonomy tables, and the Masks table. Though we can also view and edit the records of a hierarchy table in Record mode, Hierarchy mode specifically allows us to edit the parent/child relationships and the sibling ordering of the hierarchy.
    3. Taxonomy mode. This mode allows us to view and edit the taxonomy tables in the MDM repository. We usually use this mode to create and maintain the category hierarchy used in the repository, and to manage the attributes associated with each category and subcategory. Though we can also view and edit taxonomy tables in both Record mode (for searching) and Hierarchy mode (for editing the other fields of information associated with each category), Taxonomy mode is unique in that instead of focusing on the records of the taxonomy table, it allows you to create and manage the pool of attributes associated with the taxonomy table, and to assign attributes to categories on a category-by-category basis.
    4. Matching mode.  This mode allows us to identify and eliminate duplicate records within an MDM repository. When you view the main table in Matching mode, MDM allows you to perform u201Cmatching-and-mergingu201D on and against any or all of its records, using various user-defined criteria (like creation of Rules and Strategies) to decide whether or not records are potential duplicates.
    5. Family mode. This mode allows us to view and edit the Families table, which layers a hierarchy of families upon the taxonomy hierarchy to further break down each category into smaller groups of main table records. We usually use this mode to partition the categories of the taxonomy hierarchy by the values of other fields and/or attributes, and then to associate family data (such as an image, a paragraph, and bullets) once with each family of main table records rather than each individual record.
    Can we create a table of one type in console and can use the same table in another mode in data manager, say if I create a taxanomy table and can I use it as the hierarchy mode in the data manager.
    The structure of the tables are defined in Console and those tables are then used in Data Manager, but if you have defined a table as a Hierarchy table you cannot use that table in Taxonomy Mode but you will be able to see all the tables in Record Mode.
    Hope this would be useful...
    If useful do reward points!!!!
    Regards,
    Parul

  • Oracle Internet Expenses related tables and views

    In Oracle 11i when we go for internet expenses how to get the table and view details

    user12180635 wrote:
    Thanks for your reply. But didn't find any Schema or Tables related to Internet Expenses in eTRM. Can any one please specify them.IINM, it should be under AP/APPS schemas.
    SQL> select owner, object_name, object_type
    from dba_objects
    where object_name like 'OIE%';Thanks,
    Hussein

  • Can anyone help me with this problem?? Internet and Picture mail stopped working?

    I just got my blackberry curve (8330) about a month ago, and about two weeks ago, my internet and picture mail just stopped working. I get the message with the picture in it, but it says I cannot retrieve it. And then when I try to send a picture message, it always fails. As for my internet, it will take  f o r e v e r  to load, then it will say there is a connection error. And I went to manage connections and it says that I'm not connected to the blackberry internet or enterprise server. I've tried "provisioning it" because that is what the person I talked to on the sprint website said to do, but it loads for a few minutes and then says "Provisioning cancelled..."
    Has this happened to anyone else?? How do you fix it?

    Hi and Welcome to the Forums!
    I suggest the following steps:
    1) Register HRT
    Homescreen > Options > Advanced Options > Host Routing Table > BBKey (it does not matter which line is current) > Register Now
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Spry Tables and Xml Data Sets viewed in IE7

    Has anyone ever run into a problem with Spry Tables and Xml
    Data Sets viewed in IE7? Work fine in IE6 and Firefox, but get the
    error "exception caught while loading feed.xml: [object Error]" in
    IE 7. Any ideas?
    Attached is the xml I'm using.
    Thanks

    I came looking for the answer to this question. I could not
    find an answer. Eventually I found it the answer that worked for
    me, a graphic designer with not much experience in xml.
    The following url provided an errata file in PDF format:
    www.peachpit.com/dwcs3cib
    which includes the following addendum to the incomplete
    instructions in the book i was using to learn about spry:
    "If Internet Explorer 7 is your primary browser, you'll nee
    to take some extra steps to view spry dynamic content locally.
    First, your site must be within the local server webroot; be sure
    your Lessons folder is stored within the Inetpub>wwwroot folder.
    Next, double-click the site name in the files panel to open the
    Site Definition dialogue. Click the Testing Server category; from
    the Access List choose Local/Network. Click Okay to close the Site
    Definition dialogue. Now, when you preview your page with Internet
    Explorer, your local Web server (localhost) serves the page as
    designed."
    Horray for me! Now i can move on from here and actually get
    some work done!

Maybe you are looking for