Nokia 7710 Media Players
Just a wish list, if that's ok here...
I think the Nokia 7710 is a great phone that almost delivers on all fronts.
However, it could do with a better video player that takes full advantage of its native widescreen and stereo output. I chose the phone as I was looking for an all in one unit that allowed me to play music, watch films and TV, edit text documents and spreadsheets and, of course, make calls. However, the use of realplayer is memory intensive and it suffers from the low processing power resulting in low frame rates. My wish is for a software answer that will allow me to watch films in the full widescreen with stereo sound. I note that there are company's out there that offer solutions but none have been ported to S90 (all are S60) - it's a shame and IMO a missed opportunity.
Also, the music player, whilst adequate could do with an upgrade. I use the Nokia (enhanced for mobiles) AAC format - this delivers excellent sound at a fraction of the file size of regular MP3s but the 7710 is unable to seek within a track, meaning you cannot go to specific points - just listen from start to finish. The player could also benefit from having some sort of graphic equalizer.
I guess I'm hoping Nokia or third party software developers are reading so that a great phone can become second-to-none fantastic!
Here's hoping...what does everyone else think?
Thanks,
G.
Thanks for replying Petrib, much appreciated.
I should have mentioned that I have tried Smartmovie and Mobile Media Maker but have similar problems with the processing power that I've encountered with Realplayer. These AVI players seem to be fine for mono sound, but if you try to encode with stereo, the sound breaks up or the picture stutters on play back.
I am interested in seeing a S90 port of the software used by ROK or Actimagine's Mobiclip or even Pocket Video (I used to use that on my 7650) as these seem to use bespoke encoding systems designed for the low procesing power of hand held units (I haven't seen the first two in action).
Here's hoping that it may happen one day...
Thanks again,
G.
Similar Messages
-
Muted/Muffled audio on all Media Players after upgrade to iTunes 7.0.1.8
In the past few days I have upgraded my version of iTunes to 7.0.1.8. I am now noticing new audio playback issues I have not seen up until my upgrade.
When playing back a large majority of my library, the audio on an MP3 becomes muted/muffled at various points in the song. I thought my speakers were damaged, so I tried the same MP3 files in both Windows Media Player and Creative Media Player. I found that the other two media players had muting/muffling at the exact same points in the songs.
The interesting this is that this issue never occureed until I upgraded to the latest iTunes. In addition, the exact same MP3 files sound perfect when played on my Nano.
Did iTunes corrupt a DLL file on my PC? Since this problem started I have updated the drivers on my Creative Labs Audigy 2 Platinum Pro, have not seen any improvement.Thank you for describing the problems so well. I also have been going nuts trying to restore my Itunes Library to its original (or acceptable) condition. I have a 5th gen 30G Video with about 4250 songs on it. After downloading 7 I found that every song in my Library had been dulplicated or triplicated. Then, a day latr, when I had downloaded album art, I discovered that every other song in any album I had downloaded (from Itunes or my own cd)prior to perhaps version 5 or version 6 could not be found. Luckily, I had an generation 4 Ipod with the original Library and I was able to download that to my external harddrive. I have spending pointless, arduous hours pointing Itunes to the correct file. Its faster to re-download the CD. Of course, I can't do that for any music I had bought from Itunes directly. Its weird because the name of the song is in Itunes, just the file can't be found. And why every other file? When I go into earlier (6 and before)Itunes Libraries, the music files are missing from them. Where did they go? When I try to sync my Ipod with Itunes, it takes forever because Itunes is searching for the missing files. I have tried to ask Apple support directly but I have gotten no response. Very, very frustrating! Any headway with your problems? Lisa
-
Asio Driver issue in Premiere Pro CC conflicting with all other media players on PC
Whenever I have Premiere or audition or After effects opened---- should I want to play a media clip on J River Media center, or Windows Media Player, the Asio driver is locked by the Adobe products, so the other media players do not have access to it. This may be a new windows 8.1 phenomenon, as i never had this before with 64 bit Windows 7.
I have had some success running the other media players on the lousey windows sound drivers, but they don't sound nearly as good as the Asio driver does, with its near zero latency.
My sound card is a Lynx aes 16, and the Win 8.1 PC pushes the digital audio out to my Berkely DAC , then to separate mono bloc amps, into Magnepan speakers as the reference audio system for my music and video editing....or for entertainment listening :-)
Does anyone have a solution that will force the Adobe CC software to release the Asio driver when I try to use J River Media center, or some other media player?I had this problem this evening 090813 after upgrading my Adobe Cloud Desktop.
I open Pro CC and had the Dolby Audio Decode Licensing Restriction for (File name.......... ) Error
Previous CC progs loaded and worked with problem.
I uninstalled Pro CC - Restarted the computer - Re-installed Pro CC.
Now working with no problem.
Hope this helps.
John -
File Connection and Socket Connection in nokia 7710
Hello,
i want to transfer some data from my PC to Nokia 7710 either using File Transfer or socket connection
For file transfer, where do i need to put my file i.e. which files does nokia 7710 allow j2me programs to access? Is is ok if the file i transfer is a plain txt file? i am using jsr 75 api for reading from the file, so what file location will i give in my program, in Nokia 7710, there are two memory drives Device and Memory Stick, so how can i access these files via a j2me program running on the cell?
If i use socket connection, how will the phone recognize PC's ipaddress? Do i need to configure it? Also my Nokia 7710 is connected to the PC via a cable attached to USB port, so what port numbers do i specify in my j2me client program that will run on the phone and normal java server program that will run on the PC
please help me out, this is very important for me
thank youHi Steve, Would you mind to give a a piece of code to solve this problem
This is my code :
is = sc.openInputStream();
os = sc.openOutputStream();
os.write(("HELO there" + "\r\n").getBytes());
os.write(("EHLO" + "\r\n").getBytes());
os.write(("AUTH LOGIN" + "\r\n").getBytes());
os.write(("dHVnYXNha2hpci50cmlhZGl0eWFAZ21haWwuY29t" + "\r\n").getBytes());
os.write(("dGEuZW1haWxjbGllbnQ=" + "\r\n").getBytes());
os.write(("MAIL FROM:<"+ from +">\r\n").getBytes());
os.write(("RCPT TO:<"+ to + ">\r\n").getBytes());
os.write("DATA\r\n".getBytes());
// stamp the msg with date
os.write(("Date: " + new Date() + "\r\n").getBytes());
os.write(("From: "+from+"\r\n").getBytes());
os.write(("To: "+to+"\r\n").getBytes());
os.write(("Subject: "+subject+"\r\n").getBytes());
os.write((msg+"\r\n").getBytes()); // message body]
os.write(".\r\n".getBytes());
os.write("QUIT\r\n".getBytes());
StringBuffer sb = new StringBuffer();
int ch = 0;
while((ch = is.read()) != -1) {
sb.append((char) ch);
si.setText("SMTP server response - " + sb.toString());but it doesn't work,...
i try to connect smtp gmail with smtp server : smtp.gmail.com and port : 465 (Use SSL)
regards
triaditya -
Thank you for stopping by.
It's like I have a ghost in Premiere!
I uploaded the same video to Youtube and Vimeo and it looks totally different!
Youtube shows the problem, Vimeo doesn't -
Youtube:
Vimeo:
Any ideas why the screen capture background (recorded with Screencast-o-matic) appears darker in Youtube?
Brightening it up in Premiere has no effect - Premiere shows both backgrounds as being pure white - so why does Youtube (and some media players - such as VLC player, depending on what video rendering settings are applied) show this difference in hue and do you know how I can export the video (which is h264) so that there's no possible way this can happen?
Thank you for any leads!
PS. Premiere Pro CC (v7.0.0 - 342)I'm back!
With some results...
If this box in VLC is checked, the mis-matching whites exists.
If unchecked, the powerpoint background become exactly as bright as the camcorder video in the corner.
(The reason things also look green & generally extra dim in the top screenshot is because I applied your video limiter adjustment layer Richard,
which didn't seem to affect the mis-match issue unfortunately)
So, it seems like something to do with YUV / RGB conversions maybe? or mis matching?
Hopefully useful research! Still not sure how to export from Premiere in a way that eliminates the risk of these 2 whites appearing differently, regardless of player/settings.
In case useful, here's what MediaInfo tells me about the
powerpoint background video:
General
Complete name : C:\Users\Luke\Downloads\Test for Luke\Test for Luke\Test PPT.mp4
Format : MPEG-4
Format profile : Base Media
Codec ID : isom
File size : 1.37 MiB
Duration : 47s 0ms
Overall bit rate mode : Variable
Overall bit rate : 244 Kbps
Tagged date : UTC 2015-04-02 15:05:30
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 47s 0ms
Bit rate : 164 Kbps
Width : 1 366 pixels
Height : 768 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 30.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.005
Stream size : 943 KiB (67%)
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 46s 185ms
Bit rate mode : Variable
Bit rate : 75.8 Kbps
Channel(s) : 1 channel
Channel positions : Front: C
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 427 KiB (30%)
and the camcorder video:
General
ID : 1 (0x1)
Complete name : C:\Users\Luke\Downloads\Test for Luke\Test for Luke\00100.MTS
Format : BDAV
Format/Info : Blu-ray Video
File size : 142 MiB
Duration : 47s 512ms
Overall bit rate mode : Variable
Overall bit rate : 25.0 Mbps
Maximum Overall bit rate : 28.0 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Format settings, GOP : M=3, N=24
Codec ID : 27
Duration : 47s 480ms
Bit rate mode : Variable
Bit rate : 23.8 Mbps
Maximum bit rate : 25.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 50.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.229
Stream size : 134 MiB (95%)
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 47s 520ms
Bit rate mode : Constant
Bit rate : 256 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : -40ms
Stream size : 1.45 MiB (1%)
Text
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Duration : 46s 976ms
Delay relative to video : -40ms -
Adobe Premiere Pro
Hi,
When you use "Save As" you are essentially saving the whole project file. Not exporting. So what you need to do export your movie to a format that your media players like.
Check this out for some quick ideas. Outputting your show | Learn Premiere Pro CC | Adobe TV
Pete -
My Nokia 7710 does not recognize new MMC
I purchased a MMC+ 2Gb for my Nokia 7710. My phone does recognize that I have inserted this new memory card. I can't format the card because the option is greyed out. Any ideas on what is wrong?
nokia series80 devices...9300/9500/9300i/7710...cannot handle mmc cards over 1gb although there are some users whose phones work fine with even a 2gb mmc.
-
Do I need to download Real or Win Media Players
I have attempted to download "Arkansas Week" found at AETN.org. The applications provided Real or Win media players. Do I need one of the them on my iMac?
Hi
I would say so, and I would go for Real Player.
Download Real Player
Windows Media Player is no longer supported though, I believe, you can still get version 9. Read about that at
http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=windowsmedia Most people now download Flip4Mac
There's a link to Windows Media Player 9 for Mac on the website (the long link).
Steve -
After downloading iTunes all media players have choppy playback
I got a new computer and my CD and DVD playback was great until I downloaded iTunes. Now all my CDs and DVDs play back choppy/stuttering/etc. on any media players that came with my computer and iTunes. I know it is a software issue, but I don't know much else.
Can anyone help me please??Just an off the cuff suggestion: Have you run your Windows updater since you got your computer? Do you have all the most recent available drivers for your computer's components? You should be able to check your computer mfg's website to verify this.
Good luck! (And be patient, I'm sure others will chime in with other suggestions as well!) -
Access permissions to external hard disks and media players
I've recently purchased an iMac. I have a number of external disks and media players that when connected are not allowed write access. When I use the disk utility I cannot change the permission from read only. Whats the solution to changing them to read and write access?
ThanksHi Kieran
Welcome to Apple Discussions
You can not write to them because they a formatted windows NTFS.
See > http://www.macworld.com/article/51972/2006/07/ww_drives.html
If you want to use an external disk with both PC's and Mac's, you will need to re-format it MS-DOS/FAT-32.
If you wish to use them with only the Mac's, you will need to Format then GUID partition/Mac OS X.
See > http://www.kenstone.net/fcphomepage/partitioningtiger.html
*+Proceed with caution when re-formatting disks+:*
1. Before re-formatting any drive you will need to backup the current data on it to a computer or another drive, because re-formatting will erase all the data on the drive.
2. Fat-32 has a file size limit of 4GB and will not allow single file transfers greater than 3.7 or 3.8GB.
3. You may not be able to change the format or write to many media players without special software.
Dennis -
Set all media players in a document to start on page opening
How can I set all the existing media players (mp3 files) in a document to start playing on page opening and stop on page closing
I'm sorry for asking for a complete script but I can't work it out from the SDK manuals, and I think this example would help me a lot with future scripts
Thanks
TrevorHi, Trevor!
Did you consult the online DOM documentation for something like that?
I found the following:
http://help.adobe.com/livedocs/acrobat_sdk/10/Acrobat10_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=JS_API_AcroJS.88…
http://help.adobe.com/livedocs/acrobat_sdk/10/Acrobat10_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=JS_API_AcroJS.88…
Using AnnotRichMedia instead of media could be the key. Since media seems to be outdated, deprecated or something…
I'm out in the dark like you are with Acrobat and JS. Just consulted some of my bookmarks pointing at the SDK of Acrobat.
Some dummy-code:
var myRichMediaObjects = myDoc.getAnnotsRichMedia(nPage);
Properties of AnnotRichMedia object:
http://help.adobe.com/livedocs/acrobat_sdk/10/Acrobat10_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=JS_API_AcroJS.88…
for(var n=0;n<myRichMediaObjects.length;n++){
myRichMediaObjects[n].activated = false;
Don't know much about the DOM here. Maybe there is no length property for the object that is returned by getAnnotsRichMedia() ??
Did not try anything.
Uwe -
Media players in safari wont play sound
Media players such as the players on youtube, and yahoo video,etc, won't play any sound. help would be appreciated
Hello Bzk, welcome to apple discussions; )
See if this article can help.No sound from some applications, but system alert sounds play
Also try launching Garageband see if that helps. If not:
In AudioMIDI Setup in Utilities, Audio Devices tab:
• System Settings: Default output set to "Built in Audio" & SYstem output the same
• Audio Output set to External speaker, not Headphone or other devices.
Let us know if this helps any.
Eme; ) -
I installed firefox 4 and now none of my media players work in my e-mail account - only giving me a blank screen and a "done."
Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H. -
while any video file is running , suddenly it freezes the video for about 3 to 5 seconds in all the media players like quicktime, vlc and div x and this thing happens frequently with video files.
it very hard to watch the video movie with this issue.
do i need to update any video codec or any thing else??
following are my notebook specifications
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 512 MB
Software OS X 10.8.4 (12E55)while any video file is running , suddenly it freezes the video for about 3 to 5 seconds in all the media players like quicktime, vlc and div x and this thing happens frequently with video files.
it very hard to watch the video movie with this issue.
do i need to update any video codec or any thing else??
following are my notebook specifications
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 512 MB
Software OS X 10.8.4 (12E55) -
When I add multiple media players to my web page and upload them online, all four mp3 files begin to play at one time. I need someone to take me through the steps to create playback controls in the HTML code so that the media players DO NOT play until the viewer clicks the "play button."
By default, HTML5 videos do not autoplay on page load.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 with Video</title>
<!--help for older IE browsers-->
<!--[if lt IE 9]>
<script src="http://html5shiv.googlecode.com/svn/trunk/html5.js"></script>
<![endif]-->
</head>
<style>
video {
max-width:100%;
display:block;
margin:0 auto;
</style>
<body>
<h2>Use 3 File Types to support all browsers & mobile devices: MP4, WEBM and OGV.</h2>
<h3>If needed, use this Online Video Converter
http://video.online-convert.com/</h3>
<!--begin video-->
<video controls poster="Your_poster_image.jpg">
<!--these are 6 sec sample videos for testing purposes. Replace sample-videos with your own files-->
<source src="http://techslides.com/demos/sample-videos/small.webm" type="video/webm">
<source src="http://techslides.com/demos/sample-videos/small.ogv" type="video/ogg">
<source src="http://techslides.com/demos/sample-videos/small.mp4" type="video/mp4">
If you're seeing this, you're using an
outdated browser that doesn't support
the video tag. </video>
<!--end video-->
</body>
</html>
Maybe you are looking for
-
Importing text file to address book?
I created a text tab-delimited file for import. From within Address Book, ran "Import". Matched up field names. All looked good. When I clicked on "OK" basically very little happened. After a few seconds the blue OK button became clear but nothing el
-
Push Notifications to end users and Conditional Success Screen Name ?
Hi, Scenario: PO Approval Description: I am developing a PO approval application with 3 levels of approval. The HWC application is based on the push notification ( DCN with payload ). When a PO ( Purchase Order ) is created/modified the end user will
-
Connect iphone to appletv, connect iphone to Apple TV
How would i go about connecting my iphone 5 to apple tv - we use apple tv to connect our ipad at work to our music system and it has the icon on the computer and ipad but dont see it on the phone - any help would be appreciated!
-
what is the code for merging cells ? to create a shortcut ?
-
Trigger Nestlevel in Oracle?
Hi friends. I use the variable @@nestlevel to control the execution level of a trigger in SQL. There are some way to do this test and control in Oracle? I have a trigger, but I want that your body be executed only if the nestlevel be > 1.