Nokia 808 GPS... can you enter a walking route, l...

Using the GPS on a Nokia 808 PureView....  Can you enter a walking route?
In Google map you can enter a .kmz file. It will show up as a line on their maps.
Is there a Nokia GPS equivalent, using the native GPS?
I am hoping to walk the “Camino de Santiago” an 800Km walk across northern Spain.
I will not be walking on the roads.
Just asking the Nokia GPS to find a walking route may not pick the correct trails.

aname4me wrote:
I have now loaded ViewRanger.
But... the map require a WiFi connection.
ViewRanger just like Nokia Maps in that if maps tiles downloaded then application can be used "Offline", provided you don't use "Buddy Beacon" facility.
Whilst Open Cycle Map is compatible you do need a network connection to utilise as downloaded and cached as you go along with more information here:http://support.viewranger.com/wikihelp/index.php/S​ymbiannline_maps
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • How many times can you enter the wrong pin code on an iphone before it resets?

    How many times can you enter the wrong pin code on an iphone before it resets itself?

    Hey Robin.T,
    Thanks for the question. The following article provides the answer to your question:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you enter the wrong passcode six or more times, you'll see a message that says one of the following:
    iPhone is disabled
    iPad is disabled
    iPod touch is disabled
    You can also set your passcode lock to wipe the device after 10 unsuccessful attempts (Settings > General > Passcode Lock > Erase Data)
    Thanks,
    Matt M.

  • Can you enter a custom recurring entry in calander from the iPad?

    Can you enter a custom recurring entry in calander from the iPad?

    Unfortunately, no you can't with the built in calendar app. Take a look at some of these apps. One of them may work for you.
    http://appadvice.com/appguides/show/best-calendar-apps

  • Can you enter cumulative numeric rating data per response in colums on the Formcentral Data Form?

    Can you enter cumulative numeric rating data per response in colums on the Formcentral Data Form?
    In other words can you rate each responce numerically - have it add up per responce etc... - and then divide up the responces by the accumulated ratings ( All rated 5 ) (All rated 8) etc... ?
    Thanks
    Al

    Hi Brian
    The form is a grant application where the applicants are rated on their responses.
    The ratings are done after the answers are accumulated in the Formscentral contol panel. The ratings are done by 3 other project members (VPs).
    These ratings are in 3 catagories, each catagory is worth up to 5. The VP's will access the form central panel and rate each applicant per catagory.
    I have added 3 catagory colums with multiple choice rating selections from 1 to 5 for each of the 3 VP's for a total of 9 colums (3 x 3 catagories)
    The reason I did it this way is because at this point I would be relying on an Exel download to calculate the winner or/and also the top rated winners
    per the ratings that the 3 VP's put on them per catagory.
    Thanks for your help - do you have any suggestions to make this smoother.
    Thanks
    Al

  • Can you run a wired router from the base station?

    I have a Airport Extreme base station, I bought it about 6 months ago so it's not too old. My question is can you plug a wired switch, hub or router into it? I was told no at the apple store but I don't see why you could not. All I want to do is run a 8 port switch from the base station so I can connect my other wired comps to the net. Thanks!

    My question is can you plug a wired switch, hub or router into it?
    Yes, just connect it to the LAN port on the AirPort Extreme base station (AEBS).
    I was told no at the apple store...
    They gave you incorrect information.

  • Can you choose a different route in maps?

    I searched for directions in the maps app and it shows me a route that is way out of the way and is 16 hours compared to mapquest telling me 12 hours and a more direct route.
    I know that online at google maps you can choose from several route options, can we do this on the iPhone app?
    Thanks for anybody's help!

    oh wow, that's pretty disappointing. I'm always using Google maps at work to find places and then dragging the route around different streets to try to find the shortest distance or what *I think* will be the fastest route. That's a pretty major oversight to not let you simply drag the route around like you can on the real version.

  • How can you enter a line-break when using a Bluetooth Keyboard or onscreen Keyboard?

    In Pages & Keynote the only way to force a line break I have found is to put your finger at the end of a line until the select/insert option appears and then selecting insert, then select line break.
    This is frustratingly slow when typing a presentation or document so I bought a Logitech Ultrathin Bluetooth keyboard assuming that would have the Shift+Enter shortcut to make a line break. It doesn't, nor can I find any key combination that does, it's always a new paragraph, or nothing happens.
    I have an Ipad3,  IOS 6.1.3. I've spoken to Logitech support - they said talk to Apple iOS support, I spoke with a chap at IOS support who didn't know what a line break was, didn't know shift+enter on a PC made a line break so didn't understand my question and ended the call.
    Anyone know how to create the shortcut as an alternative to the onscreen slow way?

    Yes
    http://support.apple.com/kb/HT5633
    You can also download the remote app if you have an IOS device

  • Can you enter text into "info" pop-up window for TV Shows?

    It's not a big deal, but I was just wondering if there is a way (a script perhaps) of entering text into the little "info" pop-up window for TV Shows in iTunes? (You know the one...it pops-up when you click on the little "i" in the description box on the TV Shows main playlist)
    The show files I made myself have blank info windows of course and it would be nice to be able to enter a decent length description of the episode (the character limit in the "Description" box is so short).
    Like I said, it's not a big deal, but it would be nice to be able to enter info in there...so if anybody knows how...please let me know.
    Yhanx a lot!

    Thank you very much for your reply! I will definitely pass this along to the IT department! Smiling now!

  • InDesign CS6 - Can you add Google Walking Tour into a PDF document or interactive pdf?

    Hello,
    I am trying to figure out how to add a Google Walking tour into my pdf document. I tried using the HTML feature in InDesign CS6 but all i get is a static image of a map. Acording to the features of InDesign this should be working correct? Please let me know if this is possible or not. Thank you!
    this is an example of the kind of a tour i am talking about:
    https://www.google.com/maps?q=churchill+downs+apartments&ll=39.668589,-104.889007&spn=0.00 7325,0.016512&sll=39.669082,-104.889653&layer=c&cid=6959793594299031036&panoid=xDKaTZWvSuU KbJAQUvKKcA&cbp=13,304.18,,0,0&hq=churchill+downs+apartments&t=m&z=17&cbll=39.66918,-104.8 90121
    I've copied the HTML that Google provides for embeding but no success yet. Thanks!

    That will work in DPS, but not, AFAIK, in PDF.
    Bob

  • CNT cost ctr attribute. Can you enter a range of allowed cost centers?

    We are using SRM 5 with extended classic. We are restricting which cost centers users can shop for by specifying the allowed cost centers in attribute CNT. However, users have a large number of cost centers that they can shop with, which means having many single entries, one for each cost center.
    Is there any way that cost center ranges can be used for attribute CNT?
    Thanks
    Neil

    Hi,
    You need to maintain the attribute 'CNT' in the org structure at user level or may be upper levels and then inherit it org structure.
    You need to define the values wrt to yr backend system.
    You can assign multiple cost centres also then users will see drop down box for the same.
    One more point affecting the search help for cost center is authorisation for the resp role in PFCG i.e.
    say the user role is SAP_BBP_STAL_EMPLOYEE
    you go to PFCG
    go to roles
    doubleclick on inbuilt single role ....EC_BBP_EMPLOYEE
    click on tab authorozation
    go to display/change auth data
    go to BBP component
    go to first option 'SRM: Allgemeine Zugangsberechtigungen im EBP'
    check 'BE_F4_HELP' is flagged.
    If no tick here you will not see binoculur in EBP for user of that role
    Also see the foll note if the search help is not displayed :
    Note 656633 - Search help requires dialog users
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • Nokia 808 -How can I change camera shutter sound t...

    How can I change the camera shutter tone to louder snap sound.
    I want to change it to some other sound also..
    Please don't ask me to download other camera apps. I have tried so many but still prefer the original apps which give me the best picture and video always.

    aspergerguy wrote:
    farby wrote:
    Launch the camera and check in 'Settings' if you have the option to select 'capture Tone' ...
    That is not what OP meant, as for some reason they want a louder or more distinctive tone as some users like with ringtones!
    Well if 'capture Tone'allows you to change the shutter sound then that's exactly what he meant , unless I'm missing something

  • Nokia E71 - How do you enter a HEX WPA Key?

    Hi All,
    I have WiFi at home and I typed my ASCII Network Key in when connecting to the network and it worked perfectly.
    At work I have WiFi and a 64 digit hexadecimal 256 bit Network key and I can't seem to be able to enter it when asked for the network key...After playing around with the different options i was able to enter a maximum of only 63 characters.
    I don't have the ASCII passphrase, so i need to make the hex key work.
    How do I enter a Hex Key, has anyone done this... help please.
    hex key:
    5b6690d71850c17e4c0d7c0bee242fa06ddd706dc4b416a07d39b6d1252d11b6
    Thanks
    Message Edited by yuiou on 12-Jun-2009 08:50 PM

    Fortunately I was able to resolve my problem and I learned something about WPA keys in the process.  In my case, I originally retrieved the key from my laptop using a utility.  It displayed the 256 bit key as a 64 hex characters.  It turns out there was a typable ASCII key that worked.  The reason the hex key couldn't be translated to typable ASCII characters is that it is actually a 256 bit hash calculated from the 63 byte ASCII key combined with the SSID.  The E71x apparently supports entering the key either as the 63 byte ASCII key or as its 256 bit hex hash.  If I understand correctly, the latest implementation of WPA specifies an ASCII key converted to a 256 bit hash but earlier versions allowed entering a 256 bit key directly as hex.  I guess the latest implementation makes sense since hashing the key makes it less vulnerable to a dictionary attack, but it would be nice if the E71 supported entering the the key as hex.

  • HT4061 I have been trying to understand the new itunes, as I want to get into my music library, and getting very frustrated not being able to figure it out.  Can you help by walking me through it?

    Recently you changed the itunes and I am unable to download additional music from my computer to iphone.  How do I do this, as I want to update my music, etc.?

    Open iTunes, click on view, click on show side bar to get the classic style of iTunes.

  • Can you control switch and router access with AD (Kerberos)

    I am standing up a small environment with less than 20 switches and I want to configure the authentication so that dedicated Active Directory accounts provide access to the switches. We are not going to be able to put up an ACS box, and I don't want to use RADIUS unless I have to. Since both AD and Cisco support Kerberos, is it possible to us an AD group to control access to my switches and routers?

    Sam,
    Have you looked at these at Cisco?
    http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_cfg_kerberos.html
    Section "Login Authentication Using Kerberos"
    http://www.cisco.com/en/US/docs/ios/12_2/security/command/reference/srfindx.html
    or these
    http://www.techrepublic.com/article/configure-cisco-routers-to-use-active-directory-authentication-the-windows-side/6180954
    HTH,
    Arnold

  • Nokia 808 Headphone Problem ?

    I have a Nokia Stereo Headset HS-45 with  media controller AD-54 (which has volume control and other media controls ). It worked well with my nokia N8 but media controller AD-54 IS NOT WORKING with my nokia 808( I can hear the sound but volume and other controls don't work ). Anyone has the same problem with their 808 with this or any other headset with media controls ).

    I have just tried my AD-54 on my 808 and all the Controls work properly. The only thing I noticed is that if the lock slider is slightly off the unlocked position it will lock the controls, might be worth checking.
    I have also tried my WH-701 as supplied with my N8, and these also work, so if you still have yours it is worth trying them to see if there is a fault with your 808.
    N8-00 pc059C9F6 Belle
    808 PureView pc059P6W5

Maybe you are looking for