Nokia 808 Mobile data switch off after loading a p...
Dear Nokia
When i load for example http://538radio.radio.de the page is loaded bud after 5 sec the music stiops playing and when i check the status of the connection is say's not active.
How the hell is that possible if i want to stream some music
This is the same for
WIFI
PLEASE PROVIDE A SOLUTION SOON
I paid 600 US for this phone and its not even working normaly
The pfone is not older then 2 monts
I hope to hear from u soon
PS.
I allready search nokia forums and the internet for a sollution and please know that code *#7370* wil not fix this issue
It only takes a lot of time for nothing
A good workaround is downloading Nokia Internet radio 3,5
I downloaded the signed version from the Nokia N8 fan club site
This app works perfect.
I now have a good Radio stream on my Nokia 808
PLEASE NOKIA
Do a re-release of the Nokia internet radio app.
THIS APP IS PERFECT
Similar Messages
-
Computer switches off after loading up Itunes 9
Have just downloaded itunes 9 which 'loads successfully' but when opening it switches off the computer every time. Help required
Hello alicefromtamworth,
The article linked below details a number of steps that can help get your MacBook Pro to startup successfully.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Cheers,
Allen -
When I open firefox android, my wifi and mobile data switch off on HTC one M7
I cannot surf the net with firefox on my HTC one M7 as of this week.
Every time I open the browser, it closes my wifi and mobile data, meaning I get the error 'server not found'
i tried removing it and all its add ons, then re-installing...
Just the same.
Anyone help please?Hi RichyRiches
# I have an HTC One M7 running Firefox for Android 35 with Android 4.4.3. Is that what you are using?
# "Every time I open the browser, it closes my wifi and mobile data, meaning I get the error 'server not found' " - Strange I have no such issue. Any websites in particular? Or is all of them? Do other web browers work?
# I don't think this is a Firefox for Android problem. In the past problems like that have been because of WiFi issues caused by firewalls. Please check with your ISP and check your firewall.
Cheers!
....Roland -
Hi ,
For the last two days, i m facing this issue, my iphone4S switch off after battery level goes just below 20%. I need to charge it again to switch ON the mobile.
I have upgraded to iOS 6.1.2 two weeks back. Can anyone please help me, your help will be highly appreciated.Try fully discharging (until it shuts off) and then fully recharging (don't unplug until 100%) to recalibrate the battery meter. You may need to do this a few times.
-
1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use,
3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
4. After 5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance..."I get the feeling that this is a software issue that could probably be solved quite easily"
Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
!http://i50.tinypic.com/izvwo1.gif! -
Optical audio in Lion switches off after 30 seconds
I have a new iMac 27" Computer purchased November 2010 with Snow Leopard on. I have upgraded to Lion OS the day it came out.
When I started using it, I noticed that the Optical steam (red beam) would switch off after roughly 30 seconds. I researched this issue and found that OS X powers down the Sound Hardware after 30 seconds if not used, as it is fine under Bootcamp with Windows 7.
So I used a program called Sound 1.0,1 to stop the Optical connection switching off, by playing a silent sound every 20 seconds. But now Lion does not support PowerPC programs by Rosetta, so am back to the original problem, that if the hardware has switched off, I miss the first 2 or 3 seconds of the start of the audio, like Skype announcing that some has signed in / out or on MSN as a message notification.
Any ideas to sort this annoying problem be most grateful.
PeterThanks for your help Andrew.
Have tried that and seems to be working at the mo (touch wood). See how it goes.
Can't tell you what a difference it is compared to the monitors speakers.
Thanks Again
Peter -
My MacBook Pro starts and shuts off after loading for sometime
My MacBook Pro starts and shuts off after loading for sometime
Try starting in Safe mode by holding down the Shift key while booting. Safe mode takes a while to load the OS. After that, restart the computer normally.
If that does not work, start up in Recovery by holding down the Command and R keys. In the window that opens, choose Disk Utility at the bottom and verify and repair your disk. Repair permissions while you are there. -
Hello
My iphone 4S switches off after showing horizontal lines on the screen cutting through the apple logo during the restore process and then right after my iTunes shows the error 9 message, this happened 2 days ago when my phone just switched off unexpectedily and has been in this recovery mode since then. i have watched videos on Youtube and i have disabled Firewall before starting the process, i think i have done almost everything. please help anyone what do i do from here?
Just for interest sake i watched this video on youtube where this guy had the same problem but the difference is that he had it on an iPad. he opened the ipad up and did something on the ipad, it took less than a minute then his ipad worked.
I would appreciate it if someone would respond to this as fast as they can i am so stressed.
Regards
LwandoRead here:
http://support.apple.com/kb/ts3694#9
Error 9 is usually a security software issue. -
Muvo N200 Switches off after 1 tr
I'm experiencing a very very irritating problem with my player. It just switches off after playing single track. This problem only surfaced after using for approximately for 2 - 3 months. The other irritating part is that I couldn't access Recovery Mode and thus could not do any firmware upgrade, etc. Anyone can help me on this issue or must I return to Creative to have it RMA ? Thnx
Not if you don't have any problems with .2.0.
Some people will like .5.0 because it gives support for 3 levels of sub-folders which then allows sync with WMP0. But it also changes the volume scale which others don't like!
PB -
My ipad atomatically gets switched off after every 5 mins
From first day only my ipad atomatically gets switched off after every 5 mins and then atomatically gets on after 2-3 mins. is it a hardware problem or some problem in settings? if anybody knows the solution then please let me know....
Is this a brand new iPad2. Did you notice this occurring before you started adding apps? Is this is occurring if you do not have any apps you have started running either active or in the background?
If you have already tried powering off the device, you can try to do a hard reset (Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, ignore the red slider, let go of the buttons.) and see how it runs without starting any apps.
I do not have instructions for doing a restore but that is the only other step that I think of that you can take to resolve a software based problem.
If you are still seeing the behavior after trying most or all of the above, I would suggest taking it in or returning it for service. -
During video recording Mobile gets switch off
When i put my mobile in video recording sometimes my mobile gets switch off.What may be reason for this.Any solution please?
have you a memory card installled?
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
My NOKIA E 52 has switched off, and didnt do anyth...
Hi everybody
My phone ( NOKIA E 52)has switched off, didnt do anything. Now it doesnt start anymore. No vibration comes, and no display or keypad light nor any further actions. Could anyone help me fix that?
Thanks in advance.remove the battery for ten minutes
then try holding these keys down the star,number3 and call key when powering up
so hold all 4 in until you see nokia logo
if this fails send it to a nokia care centre
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
i lost my i-phone 4s yesterday night around 7.15 p.m i am keep on trying to reach my number but still the mobile is switched off,please help me how to find it
The only way to locate any lost/stolen iPhone is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords.
-
when using the Cyclops speed camera app the sound on my iPhone 4s switches off after a short while. If I close the app and reopen it, there's still no sound. If I restar the phone and open Cyclops I get sound "welcome to Cyclops" or whatever the greeting is. Has anyone got any ideas?
I've taken several Express devices apart in the past to experiment with them. The internal components warm up quite a bit in the first 10-15 seconds. They continue to heat up after this. It takes 3-4 minutes or so before the heat transfers to the outer case for dissipation.
Nothing is certain, but I'm 95% sure that this is your issue. But, trying to find a microscopic break in a circuit board trace is, as I mentioned, a real longshot. If you have the time and have done things like this before, it might be worth a shot.
I guess the bottom line is that even if this is not the issue, the device will still need to be replaced since Apple does not offer repairs. There are no software or firmware fixes for somthing like this. -
Mobile data doesn't switch on automatically when wifi is switched off after 5.1.1 upgrade
after upfating to 5.1.1 if i disable the wifi, mobile data doesn't switch on it doesn't happen everytime but most of the time. on previous updates it was fine. Here is a video of the problem
Reinstall 5.1.1 with PCC > do NOT install any app nor update any app, don't enter any google account > test it and report back PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355
Maybe you are looking for
-
Problem with aggregate function
Hello, the prerequisite is to have a table with the following columns (#id, a_date). Now the task is to select the maximum date from a range of rows of this table select max(t.a_date) from the_table t where <condition to get only some rows of the_tab
-
Hello, I'm not a regular user of Acrobat 8 professional, and would like to now: Is there a possibilty to create a kind of Alphabetic/Thematic Index :: Notebook :: Address Book (You name it !). I case, i have all necessary applications to start with:
-
The code impersonate a domain user to create a private messaging queue on local machine, using MessageQueue.Create(".\\myqueue"). When the current user is a member of local administrators, it works well. When the current user is a member of local us
-
ECP Planned values into Sales order
Hi, I have a scenario where client maiantians the planned costs with ECP for around 50 wbs elements. Client would like to bill the customer based on the planned costs of wbs elements. He would like to see all the wbs elements as individula line items
-
after upgrading to iTunes 11.01.12 the air-play button disapeared. the apple-TV3 and the receiver can communicate, but in my computer there is no button to play on any other speaker/unit. it seems that iTunes can find them. i did everything on the ch