Nokia 8800 Problem with bluetooth connection !

Ok i read alot of the topics here but i try everything and it just dont work ! It gives me some **bleep** that saz Cannot Authenicate the phone wich i dunno why ! I TRY EVERYTHING ! i have the latest PC SUITE and BlueSoleil but i still dont know what to do and why it doesnt workks (
HELP ME PLEASE ANYONE HEEEELLLPPP MEEE !!!

Go to PC Suite get connected wizard, select Bluetooth, then select "unpair". Once unpair is done, boot PC and phone, then put Bluetooth in phone on again and use get connected wizard to "repair" the Suite and phone.

Similar Messages

Nokia n80 problem with bluetooth

hello all
i have an n80 which i have given to my mother.
there seems to be a problem with bluetooth. i can connect it to my laptop by bluetooth and use the connection to browse the phone and transfer files but for some reason when i try to sync with outlook the connection always fails, all the time, no matter what.
can anyone think of any reason for this?
i have tried looking for firmware updates as i havent used the handset for 18mths but i cant find the pc cable so it wont identify the phone when i run a search.
any suggestions (apart from find the cable!) will be appreciated

Not being technically qualified enough on specifications of Bluetooth 3 all I can say is that Bluetooth SDP = Service Discovery Protocol seems to be absent fron N8, whereas it is present on say 5800XM and N97 Mini which appear to behave faultlessly with Toyota Bluetooth unit if this sheds any light.
Happy to have helped forum with a Support Ratio = 42.5

Hi i am having problems with bluetooth connection! My phone wont pair with other devices! its an iphone 4s

Hi all. I hope someone can help me with bluetooth connectivity? My phone wont pair up with other devices including my husbands iphone! He has the same problem!

the problem is what bluetooth profiles you are expecting bluetooth is a long range of services and not all devices support all profiles
here is a list of what ios devices support in terms of bluetooth profiles
http://support.apple.com/kb/ht3647

I Have A Problem with Bluetooth connection between my I-Phone and Bluetooth in my auto

I have a problem with bluetooth conection between my auto (2013 Buick) And I-phone 5. I can call out but am unable to recieve incomming calls.When I attempt to answer ,Everthing disconnects and the phone call goes to mail automatically.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

5800 + bh-103 problem with bluetooth connection

Hello,
I have nokia 5800 xpressmusic with Version 30.0.011.C03.01 that was issued for the phone in 29/06/09.
I also bought bh-103 bluetooth stereo handsfree and to my pity i realized that from time to time the bluetooth connection between my 5800 and my bh-103 is faulty. The phone shows that it is connected with this bluetooth but you cannot dial nethier from phone nor from the bluetooth bh-103. Even if i power off the bh-103 the phones stil shows the bluetooth connection to be active(the icon of the headphone dissapears). If i power on the bh-103 even if the icon of the headphone in the display of the 5800 dissapears it can't be paired. What i mean is that the phone shows both the bluetooth connection to be opened plus the icon of the headset in the display but as i mentioned before you can't voice dial by pressing the big center button of the bh-103, neither you can dial from the phone itself.
Has anyone faced similar problems?
P.S. this kind of problems i am facing since i bought the phone with the already installed version of the firmware

First, restore factory settings in your 5800 phone. Next reset the BH-103 by pressing and holding down the multifunction key for more than 8 seconds.
Now, turn it on (press and hold down the multifunction key for approx. 4sec)
Turn on the bluetooth in your 5800 (you must do it within a second or two after you turn on the headset)
Wait for the headset to detect and pair with the phone. The pass code is 0000. In your phone, set the headset as authorized, so that it can connect to your phone automatically.
If the problem persists, I would advise you to check for the same behaviour with another bluetooth headset. Do you have problems while transferring files, connecting to the PC thru PC Suite, etc using Bluetooth?
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Does anyone have problems with Bluetooth connection to stereo in car

I'm having problems with my iPhone 4 regarding my car Bluetooth was fine before update but after update nothin but problems sometimes it connects but very low volume also when I come out of car my ringer volume goes down very low meaning If I don't turn it backup I can't hear incoming calls or message tones already had replacement phone from apple but once again after update same problem do u guys know if apple are aware of this problem as guy at genus bar basically saying that it's my stereo that needs updated my car is a 2011 seat Leon which stereo is made for iPhone 4 contacted garage and they said its down to the update I have read of a few problems like on forums and wondering when the geniuses are going together finger out and sort these problems out as I feel like throwing my phone out the window when it starts it none sense also when it connects with low volume in car I have to turn the Bluetooth off and back on again for it to connect properly

Hello:
I think you should contact Pioneer as both devices you mention are from that manufacturer.
Barry

Problems with bluetooth connection to wireless mouse and keyboard

I am using a mac book (aluminium) with 10.6.4 with a Cinema Display and a wireless keyboard and mouse. My time capsule is located only 1 meter away from the mac book and every time the automatic sync starts my mouse and keyboard do not repsond anymore. It seems that the bluetooth connection is somehow heavily loaded due to the network traffic. I have updated all devices and restarted the computer several times. It always keeps on doing that. Any help?

philip_axmann wrote:
every time the automatic sync starts my mouse and keyboard do not repsond anymore.
what you are seeing is called _*wireless interference*_.
change the channel your TC broadcasts on.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Problem with bluetooth connection Nokia n6110

hi can anyone help? my phone is showing the bluetooth symbol and tells me that I am "on" but I am unable to bluetooth to either my computer or my car- both of which are bluetooth enabled for everyone else! This is very frustrating because it has previously been working. My car people tell me it is my phone and the phone people tell me it is the car..HELP!!

Hi,
sorry but did you try to pair anew once more devices.
Pasword 0000.
If it doesn't help try to restore default/factory settings, you lost all your settings, before make a memory backup.
Ater that start to pair devices.
Maybe it helps.
BW
Message Edited by hieronim69 on 31-Dec-2008 06:14 PM
N95 & N96 User

Problem with bluetooth connection between iPhone 5s iOS 8.1.2 and MacBook Pro (Mid 2012) Yosemite 10.10.1

After the upgrade to iOS 8.1.2 in iPhone 5s and OS X 10.1.1 Yosemite (MacBook Pro Mid 2012) can not connect my iPhone 5s to the MacBook, the iPhone tells me: "The MacBook is incompatible" or the message "Connection Error, Make sure the Mac is turned on and is within range" even the iPhone being close to the Mac. Otherwise with the updated iPad 2 (iOS 8.1.2) is connected via bluetooth to the MacBook without any problems, Even the iPad 2 does not detect the iPhone bluetooth.
Help me please
Message was edited by: aguil77uvr

An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

Nokia 3161 Problem with Bluetooth

I just bought a Nokia 3161 but the blue tooth does not work with any other cell phone. I've tried a million times and it just won't work. It connects with the other phone but when the time comes to transfer a file it stops and a message that says something "interrupted" appears what can I do? Can somebody please help?

Not being technically qualified enough on specifications of Bluetooth 3 all I can say is that Bluetooth SDP = Service Discovery Protocol seems to be absent fron N8, whereas it is present on say 5800XM and N97 Mini which appear to behave faultlessly with Toyota Bluetooth unit if this sheds any light.
Happy to have helped forum with a Support Ratio = 42.5

Anybody else having problem with bluetooth connection in vehicle

I have had the iPhone 4s for about 10 days now, and my problem is lag time connecting to the Bluetooth in my vehicle. When I make a call from the phone, the Bluetooth doesn't connect until the call is picked up on the receiving end. In other words I never hear the phone ringing, nor do I hear the person I am calling say hello. Apple has sent me a new phone, it has the same problem. They think its my vehicle. Called Toyota for Bluetooth upgrade, they said I should not need one. My previous 2 phones hooked up without a problem. Yesterday I tried my sons iPhone 4, it hooks up immediately. So I am assuming the 4s has a software issue. Which Apple is not as yet aware of. Anybody else with this problem. Andre

bingmei wrote:
I haven't had a consistent 4G signal since 7/19. I called Verizon and tech said there were no reported outages. Trouble ticket was created but I haven't heard anything yet. I thought maybe it was related to heat wave but today, still no signal and it's cooler. I l live in the city and work downtown. My software is current and I'm not rooted.
Hi Bingmei,
I understand your frustration with not getting a 4G signal in Chicago. Are you still experiencing this issue? The post below yours states that a power cycle corrected the issue. I did check my references and I am not showing a 4G outage in Chicago from the 19th.
Have you received word back yet from the trouble ticket that was issued? Please let us know so we can make sure that your issue is resolved.
Thank you and have a great day!

[Q]Problem with Bluetooth connection between Xiaomi Mi Band and Lenovo P780.

Hello,
I bought Mi Band to my Lenovo P780 and I have connection problem. I have paired both devices and everything works well but 10-20 times a day connection is lost. And after I open Mi Fit, app try to connect with phone and do a sync but it can't (long time: "Connecting... Getting info from your band" and after: "Couldn't connect, pull down to retry."). Only after turning Bluetooth off/on app can connect to phone and do syncing. This is very annoying. Always after night the connection between Mi Band and phone is broken. What can I do about this problem? I need have a real-time notifications on Mi Band so I need have stable connection between phone and band all the time.
I have Lenovo P780 on 4.4.3 and Xiaomi Mi Band on firmware 1.0.9.0 + Tweaked Mi Fit with notify 1.2.922. But I tried also previous versions of Mi Fit - always the same result. And I tried on Nexus5 rom final, official Lenovo KK rom vibe, Alice Project 7.5 and Alice Project 8.0 roms - always the same result.
I tried on 2 other phones and bracelete isn’t broken. Everything is ok – stable connection.
Problem is in Lenovo. What should I do?
Thank you very much.

I have a better experience as my microsoft sculpt touch mouse now works fine - before it was always disconnecting.
Otherwise I have noticed the following with this new update:
- you have to update the bios version too to maximise the improvement
- regarding the special settings of my card, and after lots of test, my best setting is :
Antenna diversity type : 3 (before upgrade of bios, i had no wifi with 3 as value) - it seems it gaves me a slight enhancement
Bandwith: 20_40
Selective suspend : enabled (disabled doesn't change anything)
Selective suspend timeout: 30 (more doesn't change)
Wifi-config: wifi (that's the real trick, if set to Performance, the drop in performance is impressive)
in the meanwhile i was typing that i experienced a slight bluetooth connexion drop... less than before, but it's not totally fixed.
i think alas that the choice of the wifi card is just very bad. I ordered back in 2008 a profesional Dell laptop with a wifi n 2x2 450Mbits minipci. I expected that in 2012-13, an ultrabook without lan connexion and a ssd would at least provide a 2x2 (dual band) 300 Mbits wifi n... but here it's just the cheapest wifi n single band + bluetooth bundle which has been put. The worst is that's an economy of maybe 20€ which is ridiculous on a >1000€ machine.
Once the guarantee has passed, i think i'll upgrade my machine with a decent minipci wifi card and that's all. At least it seems that the dismounting of the Yoga 13 is quite well documented.

Problem with bluetooth connection

Hi, i Have a Qtek 9600(HTC TyNc) and im having some problems, when i share my Qtek connection with mac os x... there arent big problems however when the connection falls the mac os x starts to try to disconnect it.. but it doesnt stop... it continues to show.. and show the message "disconnecting" and the bluetooth service crashes. My keyboard stops working.. and i cant restart or make anything with my mbp :S

Yes, get a new car?
Your dealer has it right.
If he says the phone is not compatible then its not compatible...
Sorry
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Nokia C7 - Problem with VPN Connection over WLAN

Hello,
today I installed Nokia VPN Client 44.01(5) for Belle.
Before this update I used the following configuration: I set two SIP-profiles up and for each profile a own VPN-connection. One for connecting over radio and one for connecting over WLAN or hotspots.
So over all I had three kinds of connections or connection groups to choose: "Internet" with the radio and home wlan connections, "Intranet" for the VPN-connection over radio and "Intranet over WLAN" for VPN-connections over other WLANs.
The advantage of this configuration was that I could use the SIP-profile depending on my location and the phone had not to use the "standard" VPN-connection ("Intranet") over radio.
Now after the update I have the problem that I can't connect to my VPN over WLAN at all. Not with the SIP profile and not manually over the internet browser. There is always the notification "Connection Problem".
I tried also to put the "VPN over WLAN access point" from the "Intranet over WLAN"-group to the "Intranet"-group and gave it the first priority, but that doesn't helped too.
Does someone of you had or have the same kind of problem or otherwise has any clue about that?
Any help is very much appreciated!
Thank you in advance! I hope that I described my problem clearly.
Greetings
unsys

testing with the faceplate removed and into the master socket witha brand new filters result's below . I tried the quiet line test and it seems silent so no issues there. Can anyone see an issue, I've posted the noise results etc as well with the faceplate removed. (using a butter knife cause i'm just out of bed and tools are in the garage!)
0.7 Mbps
0 Mbps
1 Mbps Max Achievable Speed
Download speedachieved during the test was - 0.7 Mbps For your connection, the acceptable range of speeds is 0.2 Mbps-1 Mbps. Additional Information: Your DSL Connection Rate :1.06 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM) IP Profile for your line is - 0.75 Mbps
System Up Time 00:11:28
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
WAN
PPPoA
6657
9689
0
2806
19425
00:10:58
LAN
10M/100M
28652
22350
0
22356
5418
00:11:24
WLAN
11M/54M/300M
0
0
0
0
0
00:11:11
ADSL Link
Downstream
Upstream
Connection Speed
1056 kbps
448 kbps
Line Attenuation
49.0 db
27.0 db
Noise Margin
10.6 db
20.0 db

HT204387 Problem with Bluetooth connection.

While I can pair my LG 290c cell phone with my iPad (getting a confirmation number on both screens), when I attempt to make the connection, a "LG290c not supported" message comes up. Not sure why it pairs in the first place if not supported.
Can anyone offer suggestions or help?

     Thank you for the prompt response and the information provided.
     I went to the web site you provided and reviewed the "supported Bluetooth profiles" listed there.
     In looking at the one marked HFP 1.6, it seems to be stating that if I interject a Bluetooth-capable headset between the iPad and the telephone, I might not only get all three devices to "pair," but perhaps even be able to get all three connected to one another.
    Have you--or any other reader--had any experience with such a set-up?
    I have a Magellan GPS unit in my car, and I've not only been able to pair the phone and the GPS unit, but now calls made to the telephone can actually be heard on the GPS unit (creating not just a "hands-free" environment," but one where I can actually hear the caller much better than I could with any annoying earpiece or "bud," etc. I thought if I could do the same with the iPad, I'd be able to enjoy the same convenience while away from the car.

Nokia 8800 Problem with bluetooth connection !

Similar Messages

Maybe you are looking for