Nokia 928 GDR2 volume keeps resetting

The volume will reset from 19 down to 13 which is enough to get me to miss phone calls on occasion.  Is there a way to get the default level to stay at 19?
Solved!
Go to Solution.

walhir wrote:
why this is on nokia phones only, those regulations?
If you care to read, there are some resources below. Old phones may not have this feature but if new phones doesn't conform those regulations, then it's their fault.
http://www.newscientist.com/article/dn17871-european-law-could-limit-ipod-volume.html#.Ukk_s99s-Cw
http://www.pcworld.com/article/172716/article.html
http://ec.europa.eu/health/opinions/en/hearing-loss-personal-music-player-mp3/index.htm#3
The silence will fall

Similar Messages

  • Volume keeps resetting to halfway upon restart

    Hi, every time I restart my notebook the volume resets so that it's halfway on the volume slider. Shouldn't this setting be saved? How do I change it so it does save?

    I'll take a look, thanks. I have a brand new MacBook Pro running OS X 10.5.6.
    Update: Just before posting this message, I checked my sound settings after booting up my notebook and it was actually saved to the last state. Then after I wrote the above message, I plugged in my earbuds thinking everything was gonna be ok and an alert sounded which about scared the bejesus out of me. I rechecked the sound settings and it was back in the middle. Grr!
    I've got the Sound Preferences window open right now and when I remove the earbuds, the output volume goes back down to what it was saved as. When I plug it back in, the volume jumps to the middle. I turned the volume down with it plugged in and tried the above test again. Now it toggles between both saved settings, which is what I'd expect.
    Message was edited by: happyandsad

  • New Nokia 928: touchscreen unresponsive

    Hi. My new Nokia 928 arrived today and the touchscreen is unresponsive. All I can do is get the "get started" button to appear, but the screen wont respond at all. I've tried a soft reset, but can't try a hard reset because you need the phone to first be oof and I can't turn it off (unless there is a way to turn it off without hitting the power button and then swiping down?) Any tips?

    Its a common issue that has an easy fix...usually. 
    Power button + Volume Down for about 20-30 seconds.  This will power down and power up your phone.  I havent really found a pattern to why the dead screen happens (its happened about 3-4 times in the past 5 months) but I turned down the display sensitivity from High to normal and that seem to calm it down a bit.  I also keep my screen clean from excessive oil and grime. 
    Hope that helps

  • TS2771 volume keeps muting or gets stuck

    since updating  my ipod touch to ios 7 my volume keeps muting while playing music or sometimes gets stuck on high or low and i have to keep restarting ipod everytime then it works for a while and then i get problem again please help

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears. done
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
      - Restore to factory settings/new iOS device.
    - Wait for next iOS update

  • Why does my 4s volume keeps going up by itself?

    Hi. Thanks for your advice in advance!  For the past 4 weeks, the volume of my 4s keeps going up on its own and then the volume screen doesn't disappear.  It's really hard to manage texting/talking with this annoying issue.  Has anyone had this same issue?  Would apprecite some feedback.  Thanks!

    I had the same issue but on my iPhone 4S the volume keeps going down on its own and then goes on mute which really frustrates me. I can't believe you have the same problem.
    @pogster Well,I already tried resetting all the settings and nothing changed.
    I'm sure there is something wrong with the Hardware,software is not related to this issue.
    I think something is repeatedly pressing the volume button and its going down or up.
    A way to avoid this is to stop pressing the volume buttons from now on,thats what I did. Increase the volume from the screen not from the volume buttons and visit the closest Apple Store to help you with this.

  • Display screen keeps resetting every 5 miutes

    Our business computer is an Imac G5 10.4.11 Tiger. The display screen keeps resetting every three minutes. It just flashes and resets itself. I don't loose anything but it's very annoying. I've reset the pram & nvram with no luck. I've also done all the repairs off the start up disk. Any thoughts?
    <Post Relocated by Moderator>

    Hey Michael,
    I brought my Imac up to the Apple Store where we purchased it from. They had Friday & Saturday and called Sunday saying it was done. My wife brought it home and we plugged it in only to find it's still has the same problem. My wife said they went through the entire machine from top to bottom.
    I called the store today and had to schedule my complaint with a service tech. I brought the machine up there myself and went through the steps (It kind of scares me when I know more than the kid helping me). I understand they have to learn somehow, I own a door & window company and totally see things from both sides. I asked for a supervisor, explaining I wasn't upset with the other staff person, I was just upset with the computer. I explained to them that I had removed the cover and looked at the capacitors with three of them bulging. I explained I had posted here for some answers and that I'd researched the issue. They told me all about the problems they had with this year and the capacitor issues were only covered for a three year period (I happened to be six months late) They then proceeded to tell me that it would cost me $900.00 to fix. I had to take a deep breath and keep my composure after that one.
    My biggest complaint is they had problems with the machines logic board capacitors, but never told us it may become an issue. No letter or even the courtesy of telling us when it was serviced. I own a brand new 20" Imac, the 2005 Imac 20" (problem child), and around 10 other Imac's dating back to 2003, 4 Ipod Touch's, and 4 Iphones. Needless to say I have invested a large sum of money in Apple products. These are the only machines I've ever had since I can remember and I'll always support Apple products. It just really ****** me off when they had my machine in for power supply repairs a couple times and never said a thing to us about possible problems down the road. Now they want me to sack up $900.00 for repairs when I can get a new one for around $1200.00.
    I know that these issues arise in every kind of industry. I deal with them all the time, but if I know there's a flaw that will kick my rear end down the road, I''l head it off as fast as I can to avoid angry customers. I also don't have the volume Apple has when it comes to sales, so my issues really have no validity, they have to cut it off somewhere. Is there any other route I can take to try and get this $2600.00 computer fixed without kicking my rear?
    By the way, thanks for answering questions, I do it on a couple boards in my industry. I know how people beat you up on certain issues without knowing your doing it for free. I know where your coming from and want to say Thank You for your time!!!

  • Iphone 4 ringer volume keeps turning itself down

    iphone 4 ringer volume keeps turning itself down?

    Hi cainstigator,
    If you are having issues with your iPhone's volume setting not staying the way it should, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    Force an app to close in iOS
    Next, I would try restarting and if needed resetting the iPhone -
    Restart or reset your iPhone, iPad, or iPod touch
    If the issue is still present, you may want to restore the iPhone as a new device -
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

  • My volume keeps going up and down on its own

    My volume keeps going from full blast to mute on its own. I've updated the software, restarted it 5 times, and have taken it out of cover. Please help

    Try this.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Volume keeps muting

    my volume keeps muting by itself..yes i checked the button on the side...its done it a few times..i even check setting and it shows the volume up all the way...turning the phone off and back on seems to fix it..but then it happens again...what gives?

    I have the same problem - I've toggled the ring/mute button, reset the volume in General Settings, and sworn at my phone a lot when I've slept in (alarms are supposed to still sound even if the ring button is on mute). The phone vibrates, but I also miss a lot of calls and the mild vibration of the phone on the end table was not enough to wake me up this morning.

  • Iphone now it says it needs to be activated and plugged into itunes. It wont let me do anything because it keeps resetting. Help please.

    I cant coonect it to the computer because the iphone keeps resetting itself and the restore or activation cannot be completed. Do I just need to get a new iphone? I have a 3gs and dont want to get a new iphone. Also the iphones sim card wont work and I have tried to do a hard reset mutiple times.

    Sounds like your phone was jailbroken.  If it was, you will need to get another phone.  That phone is permanently disabled.

  • MSI 870A Fuzion.... BIOS keeps resetting it self after restart,

    HI NOOB here
    I've just brought my first ever parts for my first ever computer build.....fitted everything perfectly and booted....
    1st: logo screen came on
    then another screen came saying low battery, thunxsomething...IDE, bios clock unset...."hard drive not detected"
    3rd: screen came up asking either f1 to go into bios f2 to load defualts
    i pressed f2 little dash flashes in the top corner
    rstarted with second {the same procedure as explained }try ubuntu live usb loads......
    after shutdown and installation of OS
    i attempt to troublkeshoot the issue of bios time, IDE, and no hard drive detected
    by going into the bios... which was totally from whats expected i.e. in colomns instead rows
    i was expecting bios style shown below however after thought i got adjusted to the new rows one
    http://www.tomshardware.com/reviews/x48-motherboard-comparison,1781-5.html
    loaded optimal settings, changed bios clock and date, adjusted boot preority
    saved AND EXITED
    BUT foud that my MSI 870A Fuzion.... BIOS' keeps resetting it self to factory defualt... ,
    AND>>>>>>>>>>>>>>>>>>>>>>>>>
    also found that it didn't go directly into the NEwly installed OS.....
    HELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELP
    I'm its quit anoying knowing that this is my first ever computer build

    Quote from: npm1 on 18-November-10, 22:29:03
    it restarts as expected but it doesn't save it........and it continues saying no hard disk detected  low battery even though its connected to psu and say IDE....even though i have sata connectors......
    just as an extra, a small splat of water went on the board i simply wiped it away........(happened before first boot) would this by any chance affect the bios
    Quote
    it restarts as expected but it doesn't save it........and it continues saying no hard disk detected  low battery even though its connected to psu and say IDE....even though i have sata connectors......
    what message exactly you are getting at bios post screen?

  • Nokia 928. Latest win 8.1 software. Can not get MMS / picture / group messages

    MMS on my Nokia 928 use to work. After an upgrade is doesn't work (? - could be a coincidence it happened after an upgrade?). I get the message "Get media content now."  Tapping on the link doesn't do anything.  Doesn't matter whether I'm using wi-fi or cellular data. If I go to Settings > Cellular+SIM > SIM Settings > add MMS APN, the fields are blank. At the microsoft support site it says to save your settings, but it doesn't tell you what these settings should be. The fields on this form are APN, User Name, Password, WAP gateway, WAP gateway port, etc, etc.   Should this form be filled in? If so, what are the settings?
    I need both picture messaging and group messaging. Right now it is broken.
    Joel

        HFGuy, We certianly know the importance of ensuring your MMS is working properly. Let's look into this. Do you notice this error occuring when you are connected to our 3G/4G LTE network or Wifi? Are you receiving this error message when trying to send MMS or receive? Also, can you please confirm the current software loaded on your Nokia 928?
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • User Settings keep resetting

    I have an I-Mac. I keep using the get Info to set my preferance for opening photos and other items. I find that the computer keeps resetting them to the default settings. For example I want my .jpeg files to open with Adobe Photoshop but they keep resetting to preview. I want certain items to open in Firefox but it keeps resetting to Safari. What am I doing wrong?

    Welcome to Apple Discussions.
    You are doing nothing wrong. It sounds like LaunchServices is confused.
    Launch /Utilities/Terminal and copy & paste this at the command line to rebuild LaunchServices:
    Code:
    <pre class="alt2" style="margin:0px; padding:3px; border:1px inset; width:640px; height:34px; overflow:auto">/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user</pre>
    Then press return. Wait until terminal returns to the command line. Quit Terminal. After that, log out and back in or restart. Let us know
    -mj

  • Ipod will not charge, keeps resetting, extremely low battery.

    Someone please help!!
    I adore my Ipod, its 2+, it was working fine, till a few months ago.
    In the beginning, it stopped charging on the computer, it synced, but i would have to charge in on a Ipod radio thing first.
    Then after awhile, on the radio, (it worked perfectly at first) the ipod would come up with the message, "This accessory not supported by Ipod", it would still play on it, movies, songs, and charge it, but the message would come up every often.
    Now it refused to be recognized by the radio, and won't charge.
    (yet if you press play the song and movies will play)
    It had very little battery left so i bought a wall charger.
    I tried charging with a wall charger and car charger!
    Now its basically dead, and when i plug it on to the wall charger, the apple logo comes on, and it goes to low battery message, then apple logo..again again.
    It just keeps resetting, so i took it off that.
    Leaving on the charger for awhile won't work, because it just keeps doing that.
    What do i do?
    I can't restore it, because i'd have to charge it first!
    (I got a new battery for it a few weeks ago, the battery life was way better, charged a bit faster, and it seemed to work better, but the computer still drained it)
    Anybody have any ideas?
    Please please please.
    I swear i love it, but i'm going to throw it out the window soon.
    -edit,
    just to add, the first thing that went wrong, that started this thing, was when i got that -48 error, it doesn't do that anymore just to add
    Message was edited by: Imjustkeeding

    I have the same problem and sent my ipod to a the service center for a battery replacement. I was informed by them first by email that "Our technicians have performed full diagnostic checks on your IPOD 5TH GENERATION and have been unable to reproduce the symptom(s) you reported when you requested the repair. As a result of our tests, we can confirm that your product meets Apple specifications for performance, usability, and functionality." then I was told over the phone that they reloaded the software and firmware and that it is working properly and is being sent back to me. Then, and heres the kicker, I received my i pod back with a form stating it was a hardware failure affecting another component. I have since called multiple times and no one can tell me where the hardware failure is but the ipod still says its a battery issue. Go figure i think apple knows exactly what the faulty part is that is causing this error and has no solution short of replacing the unit and they dont want to replace the units of all those with this hardware failure

  • X-fi extrememusic keeps resetting to 2/2.1 speakers on a restart after vista upgr

    I checked the knowledgebase and it said to make sure x-fi is default device and disable other devices, which I have done, but everytime I reboot the settings in audio console keep resetting to 2/2. speaker configuration when I used 5.. If I manually set it, it works until a restart. Using driver package Any ideas?

    If you actually performed an upgrade installation of vista from xp i can almost guarantee you nothing will work perfectly as it should. Upgrade installations never work perfectly and tend to lag quickly , i recommend that you perform clean install of vista if you plan on using it for a while. You probably didn't want to hear that but unfortunately thats the way windows has always been.
    goodluck
    pete

Maybe you are looking for

  • HIRE Employee prev to the retro accounting period in payroll record

    Hi All, I have an issue when I try to hire an employee in the system. The system doesn't allow me to hire any employee before Nov 2009 as the retro accounting period for that payroll area is dated to 11 2009. The retro accounting period changed from

  • Maximum length of field in ALV GRID Display.

    Hi, I have a requirement in a report where i have to display long text related to WBS elements and Networks whose maximum length is 640 characters. I want all the 640 characters of the text to be displayed in one single line but ALV is showing only 1

  • Unix system() system call in Java

    Hi, system() call in Unix is very helpfull when you need to implement a piece of code that is already implemented in an exsiting utility. Is there a way to achive a similar functionality? To put it in simpler words - is there a way, in Java, to call

  • Help : how to configure attendance in schema (PE02)

    dear SAP masters, can u help me find what's wrong with my schema? it can't work properly VARSTP2002 : - N - Y :       HRS?4.00 :       - <       - = :             - HRS=1             - ADDZLS2816       - > :             - HRS=1             - ADDZLS28

  • Icloud settings not sticking

    I go to System Preferences on the Dock, and under iCloud the mail doesn't have a check mark, so I click on it, and the next time I check it, it's unclicked. ***?