Nokia 930 - Camera Button is no longer Silver

Hi
I thought that the Nokia 930 used alumunuim for the frame and buttons.
The volume and central button are fine, but the camera button is almost lost the aluminum coour and looks black.
Should i clean the button with some tyoe of cleaning materials?

Strange indeed... The buttons of my Lumia Icon are still grey/silver and I've been using the phone for two months right now.
But the screen is not (so) scratch resistant  I put my phone to the pocket of my fleece shirt and the zipper of the pocket did a scratch to the display

Similar Messages

  • Camera Button just stopped working

    Very strange ... has been flawless since September.  Starting today, when I push the Camera Button, it no longer vibrates and starts my camera APP.  After I manually select the Camera App from my App drawer, the button works fine to take the picture...  I've rebooted.  I've pulled the battery.
    Any ideas??

    Cody21 wrote:
    I press it a looong time - much more than "usual".  Anyway, this is very bazaar ....  I went thru the pain of uninstalling any and all APPS that I recently installed over the last week - including LPP which was a total pain.  1 by 1 uninstalling, rebooting, testing camera ...  It suddenly worked after an uninstall of 1 particular APP ... so I rebooted again, just to verify.  It failed to respond again to pressing the button .. Rebooted again, didn't install anything, tested - it worked this time ..  So honestly, I can't say any particular APP is causing this ... I reinstalled the APPS that I had uninstalled - and it is currently working  ..  So now am nearly convinced this intermittent bug was introduced with the latest OS update ...  ugh ...  It worked perfectly -- 100% of the time prior to this update.
    Anyone else experiencing this ?
    I've have the phone for over a month (yep, folks...past my 30 days.  I'm keeping the Droid X!)  It came with 2.2 (and I went through the latest update with no probs - knock wood), and I've always had to hold the camera button down for a few seconds.  Thought it was inherent to the phone. 

  • Camera button Nokia 6131

    The camera button on my Nokia 6131 is on the side of the phone and is easily pressed by accident. This leads to the camera going on to standby in either my pocket or the belt holder and draining the battery. It is possible to lock this button off? - Angus.
    Solved!
    Go to Solution.

    Lock the keypad.
    This is achieved on most Nokia phones by pressing the left menu key and then the '*' key in quick succession.
    Do the same again to unlock the keypad.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Nokia 701 (Belle) Camera Button and Lock Button pr...

    Hi,
    Before I can use the Lock and Camera Button on the right side of my phone. Later when I slide down the lock button to unlock my phone it did'nt functioning, also the Camera Button even though I press cannot came out the Camera for easy picture taking..
    Please help and suggest what to do.
    Thanks
    Carlie

    Hi KelMan,
    Welcome to the Forum.
    I would advise you to visit your local Nokia care to get the phone checked.  If it needs a repair, it could be done there.
    Pfrancoise.
    If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated.

  • Nokia Lumia 620 Cam button.

    Well,My Camera button on my lumia isn't working so any help?what can be done? please help !

    Try this,
    Go to settings, application>>photos+camera,
    Change the default camera app to Nokia Camera or vice versa.
    If this doesn't work reset the camera in the same page.
    Hope this helps.
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

  • Why does Apple iPad Camera Connection Kit no longer work with iOS8

    Why does Apple iPad Camera Connection Kit no longer work with iOS8?

    The kit is firmly inserted in thhe iPad's dock ? You could also try a reset and see if it's recognised after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    I haven't had problems using the kit with SD cards from Canon cameras . What capacity is the card, and it's an SD or SDHC card - if it's an SDXC card that's formatted as ExFAT then it won't be recognised

  • N8 camera button not working

    mmtoday my nokia n8 had problm↲its camera button had stopd working↲by presing camera button it only focuses the view but doesnt c5ick the photo↲↲plz help me em really scared↲my phn is in warranty wil nokia wil repair it for free

    PsychoDan wrote:
    Try turning the phone off and on again. Just had the camera button on mine stop working at all. and this fixed my problem. As the button still does something. It is unlikely that it is hardware issue so changing the phone should not be necessary. Probably is an operating system glitch that you ran into. If you know how to repeat the problem then it would be useful to post a bug report and then Nokia can fix it! Chances are you don't though and have better things to do than look for it!
    Same here - worked for a first three weeks then quit! Seems like in general the phone has started getting slower and delayed over time, especial with touchscreen navigation, so I suspect it's a software issue.
    Button won't turn on camera on anymore and only does autofocus but not shoots....
    Anybody has found a workaround?
    It seems the on/off doesn't work but it does seem to me if you let the battery completely drain and then recharge and restart, a number of other functions does better....
    Did anyone call Nokia for this? What did they say?

  • Nokia Pro Cam photos post-processing makes yellowi...

    Hello there! I'm here to report a common problem which happens while taking pics with Nokia Pro Cam on my lumia 920. When you take a pic it has right colours and is very sharp but after apps' post-processing the pic turns yellowish and a bit softer. It doesn't look too good after that treatment. I'm asking for patch that would prevent this problem. While I was at Windows Phone central-forums I saw that I'm not alone with this issue.
    There is photos when one can see this issue.
    First is just after taking pic and second is after processing it. I guess one can see very clear difference.
    Attachments:
    wp_ss_20130829_0004.png ‏1693 KB
    wp_ss_20130829_0005.png ‏1377 KB

    shadow118 wrote:
    I see the same thing on my 620 (yes, I know Pro Cam is not officially supported by the 620 and would not work as good as on 920 or 1020, but I found a way to get it  the interface is just so much better)
    When I take a picture with manual focus, in the screen the pic looks sharp, but when i open the gallery, it changes (wll, postprocesses) to blurry 
    just a reminder, using unsupported apps may cause serious hardware problems in short/long term. i'm sure u won't be happy when u see melting plastic parts and  some smoke on your device
    The silence will fall

  • [Suggestion] Camera Button Not Open in Pocket Option

    I like the camera button dedicated to opening (and even shooting) after a long press, but I thought before opening there could be a code of could that checks if the camera or light sensor is blacked out (from being in a pocket). If it is blacked out the camera application wouldn't open. It has opened a few times to me and I thought this would be an easy option to fix it.
    Another suggestion: the camera apps and settings should be available without having to put in the pin. I have found ways around it (setting lock time to 10 or 30 minutes) so that I can take HDR shots more readily while hiking or on the move.
    Shouldn't there be a camera app folder in the software forum? or maybe a general suggestions forum? I couldn't find any. Let me know if there is a better place for this post. Thank you!
    Edit: Just found another post that said to contact sony directly. Sent them an email.
    Solved!
    Go to Solution.

    As for your suggestions, it might not work, as it will create lag on opening the camera. Since you will have to long press it then the proximity sensor has to detect if there's anything near or not, also there are mixed results with the proximity sensor and fabric.
    I agree with you on having access to more settings without having to unlock the phone.
    There isn't a subforum on the camera, just post your questions according to the Xperia model that you have.
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Camera Zoom Function No Longer Works

    Model 8310. This function worked for the first few times I used the camera (via trackball and upper right side buttons), but no longer works. Is there something disabled that I need to enable? Manual no help. Thanks.

    Hello,
    I think you can try two things : the soft reboot, and if it does not work, the hard reboot. Don't worry, you can't lose data with these two reboots.
    Soft reboot :
    1) Hit the three following keys at the same time :
    - Alt
    - Left Shift
    - Delete
    2) wait 2 minutes for the Blackberry to wake up.
    Hard reboot :
    1) your Blackberry device is on
    2) remove the battery and wait for a minute
    3) Put the battery back
    4) wait 5 minutes for the device to wake up.
    Please tell us if it works for you.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Hold Camera Button to Unlock Bug even after updati...

    Even after updating, the hold camera button to unlock feature doesn't reliably work on the Nokia Lumia 900.  What gives, why is this still broken?

    This seems to be a problem with all Lumia 900s at this time...
    I visited an AT&T and Microsoft Store and inquired about this problem.  Every Nokia Lumia 900 on display and even the store employees own phones exibited the "works when it feels like it" camera button problem. The store employees had no explanation for it.
    Through my own fiddling with it I found the only way to get the camera button to work every time is to press the power button first to wake up the phone, then press the camera button. It is a pretty easy work-around.
    I also found that if you press the camera button slow enough to feel both clicks, or press the camera button twice quickly that can work too, but not all the time...
    As far as I know Nokia has not acklowledged this problem yet but I hope they will soon and that a software update will correct it.
    -Paul

  • Lumia 720: Power and camera button act weird

    Hi,
    My Nokia Lumia 720 is acting weird.
    The camera button doesn't work and so does the power button.
    However if I press the volume down and the power button simultaneously the button does work.
    Does anyone know how to fix this?
    I've already brought the phone back to the default settings.
    I'm running the latest developer preview if that matters.
    -- Mathijs
    Solved!
    Go to Solution.

    That's great to hear, Mathijs. If you need further assistance in the future, don't hesitate to post again here in the forum and let our community help you. 
    Cheers! 

  • Camera button on 4s won't let me send pic in a message

    4s camera button- won't let me send a picture with a message

    Sounds like an issue with your carrier.  You might check with them to see if they're having problems with MMS.  You could always try resetting the phone if your haven't already but it's a long shot (hold on/off and home buttons simultaneously for 10-15 seconds until you see the Apple logo, release and wait for the phone to restart).  Good luck!

  • N96 Camera Button Problem...

    ok so i have this N96 very good phone but the camera button dosent works for Taking Pictures 
    let me explain : when i press a little the camera button it should do this Focus and make the corners red or green and then i need to press a little harder to take a picture... but the first part with the focus dosent works and if it dosent make focus it wont take picture so it like the focus button is boken?
    and i know for sure that the camera button is not broken becuse its works fine with the Video Recorder/camcorder watever anyway i need help!! plz!!!! can someone help me? oh and today when i was updating my firmware to 12.43 my computer showed N96 disconnected via USB cable and the update program stopped and said to reconnect the device and press continue... so i did that and its finished updating maybe while the update somthing goed wrong and this is one why the focus button dosent works? should i try to refirmware it? u know like update it again? 

    The Latest version of the N96 firmware is v30, but you will have to wait for your opperator to allow Nokia to release it to there handsets before it becomes available to you
    for more information on the difference between branded and unbranded handsets you could read the following link
    /discussions/board/message?board.id=topfaq&thread.id=114
    As to your problem, if the button is sticking it sounds like a hardware problem, if so your only option is to take it to a nokia care point use the links below to find your nearest, being as you are not the original purchaser I'm not sure if you will get it repaired under warenty or not
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • Nokia Pro Cam: Color Temperature / Balance

    As a creative I purchased this phone as to take better photos. As it does that sometimes others the auto color balance doesn't get it correct. Using the limited manual settings isn't very good either as usually they are worse. If anyone at nokia reads this would you please consider adding in 3-4 steps between each color balance setting so if say "sunny" is too warm you can go a step in one direction or the other to fine tune how it looks. Adding this feature would really make it a better application and help get perfect photos everytime. As of now the iphone auto color balance tends to look betteer, eventhough the quality of the Nokia images are better if the color isn't as pleasing then its all for nothing. Please add finer color balance / color temperature controls to the Nokia Pro Cam application!!

    Photoshop CC has made Camera RAW available as a filter. That means it is easy to use it on video.
    Can you do anything in Camera RAW to a video that you can't do the hard way with color correction and levels, etc, in Premiere Pro? No. Is it easier because you are used to the sliders? You bet!
    This first frame is from a video I shot to test the codecs my camera can use. The trees are rather dark, because, well, I didn't care when I shot the video. I was concerned with the movement of the juggling toys.
    But if I take it into Photoshop and use Camera RAW I can do very quickly what would take a lot longer, for me, in Premiere Pro. You will have to take my word for it that the color of the shirt in the corrected frame is more realistic. The Camera RAW settings were pretty much what I do to almost all of my photographs. Very slight adjustment to exposure, a little clarity, bring out the shadows, bring down the highlights that are too white and bring up the contrast.

Maybe you are looking for

  • Format of the demo data source(mvdemo)

    what is the format of the datasource mvdemo that is available on oracle site? what data formats oracle mapviewer suports? where can i find datasets supported by oracle mapviewer?

  • Drum loops

    Hi,       I have a midi drum loop i have dragged out for the length of the song. How do i turn the loop into real (or non copies) so i can delete certain sections of th drums. Thanks. Rob

  • Text printing in smartforms

    Hi All, My smartform has 3 pages namely FIRST, NEXT and TERMS. I have 2 texts ( T1 and T2) to be printed on the smartforms. These texts are defined only in the first and the next pages. The condition is that these 2 texts(T1 and T2) should be printed

  • System Log SM21

    Hi, In system log it is showing the following message.could you please explain me the meaning of it. Enqueue: Accumulated wait time for lock: 1300 seconds               > Uname: LVARA enxxhead8324                                       > Obj: SLEEP #

  • Almost Constant Disk Errors, why?

    I am not sure what is going on, but in the last two weeks, I have had to re-start my MAC Pro 5 times with my Snow Leopard Program disk and use the Utility in that disk to correct disk errors. The problem always is the same "Invalid volume directory c